RCA RLED6515-UHD User manual

65
RLED6515-UHD

TV Base Stand assemble
17
17
17
18
19
18
30
31
33
3.2. Audio/Video Source Selection
3.1. Initial Installation
3.3. DTV Mode Operations
SETTINGS
PC Mode
Initial Setup
4.1.Customizing the PICTURE Settings
4.2.Customizing the SOUND Settings
4.3.Customizing theTIME Settings
4.4.Customizing the SETUP Settings
4.5.Customizing the LOCK Settings
4.6.Customizing the CHANNEL Settings
20
21
24
27

TV Base Stand assemble
3.Mounting on the wall
This unit is VESA-complian,and is designed to be wall-mounted
with a VESA-compliant 15.75"x15.75"(400mmx400mm)mounting kit
designde for flat-panel TVs(not supplied).Mount this unit according
to the instructions included in the monting kit. Length of screw should
not exceed 12 mm
NOTE
Remove the base stand before mounting the unit on the wall.
Four mounting holes
(size M6 screw)
400mm
400mm
Panel side
Screws(3)
4*18BMH Screws(3)
4*18BMH
RL
Long
Short
Long
Short

5.
6. AUDIO OUT: Output
Audio L / R (left / right)
1. USB (For Service)
4. OPTICAL
CH+
VOL+
MENU
SOURCE
POWER
USB2/USB1(For Service)HeadphoneHDMI3/MHL OPTICALRFAUDIO OUT
5V 0.5A
PC AUDIOVGAVIDEO/YAC 100-120V~60Hz Pb PrAUDIO RL
9.
10.
2.
11.
7.
8.
3.

UniversalRemote Code:20DF
(Universal Rmote Control is not included)
1
3
5
7
8
10
11
13
15
17
19
20
22
23
26
27 28
25
24
21
18
16
14
12
9
6
4
2
18.
1.
sound from speakers2.
7.
9.
20.
21.
23.
24.
22.
25.
10.
12.
5.
3.
ASPECT: Selects the screen size4.
13. PC: Press to switch to VGA signal source
14. HDMI: Press to switch to HDMI signal
15. TV: Press to switch to TV signal source
16. AV: Press to switch to AV signal source
19.
11.
17.
8.
6.
27.
26.
28.
directly.
source directly.
directly.
directly.

adaptor
Hea
d
HDMI3/MHL OPTICALRFAUDIO OUT
PC AUDIOVGAVIDEO/YAC 100-120V~60Hz Pb PrAUDIO RL
PC AUDIOVGAVIDEO/YAC 100-120V~60Hz Pb PrAUDIO RL

Note:Optical output
USB2/USB1(For Service)
Headphone
HDMI3/MHL OPTICALRFAUDIO OUT
5V 0.5A
USB2/USB1(For Service)HeadphoneHDMI3/MHL OPTICALRFAUDIO OUT
5V 0.5A
HDMI3/MHL OPTICALRFAUDIO OUT
PC AUDIOVGAVIDEO/YAC 100-120V~60Hz Pb PrAUDIO RL
PC AUDIOVGAVIDEO/YAC 100-120V~60Hz Pb PrAUDIO RL

17 18
3.1. Initial Installation
The first time the unit is turned on or anytime the system is restored to
the defaulted settings, the Initial Installation wizard will be displayed on the
screen.
Conect the antenna cable to the RF connector at the connections panel
and follow the steps displayed on the screen to set up the system basic
settings (Language, Cable, etc.) and start an auto search of TV channels.
Turn on the TV by pressing the POWER button on TV
or on the remote control, press SOURCE and use the
direction buttons /to select the desired source
depending on the equipment you have connected (AV,
HDMI, PC) or choose TV to enter these mode.
Use MTS button to select the audio language broadcasting, CC button to
show or hide subtitles on screen and FAV button to see a list of your favorite
channels.
3.2. Audio/Video Source Selection
3.3. DTV Mode Operations
3. Initial Setup Customizing the PICTURE
4. SETTINGS
4.1.
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
to select the PICTURE.
3. Use the Ÿ/źbu ons to highlight an individual PICTURE ,usetheŻ/Źto
change the se and press the MENU to exit the menu.
The PICTURE menu includes the following :
Picture Mode
Contrast Control the diīerence between the brightness and darkest regions of the
picture.
Brightness Control the overall brightness of the picture.
Color Control the color.
Tint Controls the nt.
Sharpness In
1)ASPECT RATIO This feature changes the various aspects of the TV’s video.
(Aspects include wide, zoom, cinema, normal).
contrast of the TV depending on the picture you are viewing.
crease this se ng to see crisp edges in the picture; decrease it for so
edges.
Color
Advanced
Temp. Cycles among color modes: Normal, Cool.Warm,
Cycle among picture display modes: Standard, Dynamic, , user.
TV
AV
YPbPr
HDMI1
HDMI2
HDMI4
HDMI3/MHL
PC
Source Select
Use CH+ or CH- buttons to tune the desired channel, or enter the channel
number directly using the numeric keypad. Press OK to display on screen the
list of TV (press the /buttons to sort by group and show only the DTV,
the analog TV channels, etc.).
^ŽŌ

19 20
Customizing the SOUND Customizing the TIME Se ngs
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the TIME.
3. Use the Ÿ/źbu ons to highlight an individual TIME ,usetheŻ/Źto
change the se and press the MENU to exit.
The TIME menu includes the following op ons:
Sleep
Time Format
Auto Clock
Clock
Timer All
Please Note:
ĂƉŽǁĞƌƐŽƵƌĐĞ/ĨƚŚĞdsŝƐƵŶƉůƵŐŐĞĚŽƌƚŚĞƉŽǁĞƌƐƚƌŝƉŝƐƚƵƌŶĞĚŽī
CABLE or SATELLITE of anything else please use make sure AUTO CLOCK
ŝƐƚƵƌŶĞĚŽī
ow you to set up the sleep among: 5min, 10min, 15min,
30min, 60min, 90min, 120min, 180min, 240min and oī.
Time Zone Allow you to set up the sleep among: PaciĮc, Alaska, Hawaii,
East Central and Mountain.
Daylight Saving Time Allow you to turn on or oīthe daylight saving
4.2. 4.3.
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
to select the SOUND.
3. Use the Ÿ/źbu ons to highlight an individual SOUND ,usetheŻ/Źto
change the se and press the MENU to exit the menu.
The SOUND menu includes the following op ons:
MTS
AVL
Allow you to select among: Standard, Music, Movie, Sports and User.
Surround Allow you to select between Oīand On.
from overly loud commercials.
This feature adjusts the second audio programming in analog channels.
Digital Audio
Output
Allow you to select between PCM, RAW and OFF.
Audio Language Allow you to select audio language among: English, French and Spanish.

21 22
Select TV source for example. (Press SOUCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the SETUP.
3. Use the Ÿ/źbu ons to highlight an individual SETUP ,usetheŻ/Źto
change the se and press the MENU to exit.
The SETUP menu includes the following op ons:
Menu Language Allow you to select menu language among: English, Français and Español.
Transparent
OSD Timeout
KƚŚĞƌ^ĞƫŶŐƐ
dŚŝƐŽƉƟŽŶĐŚĂŶŐĞƐƚŚĞƟŵĞǁŚŝĐŚƚŚĞdsƐK^ŵĞŶƵĂƵƚŽŵĂƟĐĂůůLJŐŽĞƐŽī
Input PC signal Įrst, then press SOURCE bu on to select PC mode, press Ź
bu on to conĮrm.
H-Posi on Allow you to use the Ż/Źbu ons to adjust the H Posi on.
V-Posi on Allow you to use the Ż/Źbu ons to adjust the V Posi on.
Clock Allow you to prolong the image.
Phase Allow you to adjust the de
Auto Select “Auto” and press the Źbu on, the unit will
automa adjust all items to achieve a best eīect.
Close Cap on Use the źbu on to highlight the Close n item, then press the Ź
bu on to enter into the following menu.
CC Mode Allow you to select the CC Mode among: OnOī, and CC
on Mute.
Analog CC Allow you to select the basic sel on among: CC1, CC2,
CC3, CC4, Text1, Text2, Text3 and Text4.
Digital CC Allow you to select the advanced sel on among:
Service1, Service2, Service3, Service4, Service 5 and
Service6.
Op Use the źbu on to highlight the “Op on” item, then
press the Źbu on to enter into the following menu.
Customizing the SETUP Se ngs
4.4.
Exit
Input Label dŚŝƐŽƉƟŽŶĐŚĂŶŐĞƐƚŚĞƐŽƵƌĐĞŶĂŵĞƐƚŽLJŽƵƌƉĞƌƐŽŶĂůƉƌĞĨĞƌĞŶĐĞ
dŚŝƐŽƉƟŽŶĐŚĂŶŐĞƐƚŚĞƚƌĂŶƐƉĂƌĞŶĐLJŽĨƚŚĞŵĞŶƵĂůůŽǁŝŶŐďĂĐŬŐƌŽƵŶĚds
images to show through.
Exit

24
Customizing the LOCK Se ngs
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the LOCK.
3. Use the źbu on to highlight “Enter Password” item, use the numeric keys to input 4-digital
password. A er you that, the screen will display the junior menu. A er ngs, press menu
to exit.
NOTE: The factory password is 0000. The supervision password is 8899.
4-di
g
ital
p
assword
Input
The LOCK menu includes the following op ons:
Change Password Use the źbu on to select the “Change Password” item, then press the
Źbu on to enter into the following menu.
Input the new 4-digital password and input it again to conĮrm.
System Lock
Allow you to turn on or oīthe system lock.
If you turn oīthe system lock, then the following items (US, Canada, RRT
Se ng and Reset RRT) will unable to use.
4.5.
Exit
23
Use the Ÿ/źbu ons to highlight the desired item, and
use the Ż/Źbu ons to select.
Restore Default Restore all se ngs in SETUP menu to factory se ngs.
Exit
Setup Wizard dŚŝƐŽƉƟŽŶĞŶĂďůĞƐƚŚĞdsƚŽƐŚŽǁLJŽƵƚŚĞƐĞƚƵƉǁŝnjĂƌĚŽĨƚŚĞdsĂŐĂŝŶ
Exit
Please Note:
Closed captioning is only available under AV and TV ports.
Closed captioning depends on your TV program’s support. Sometimes due to the
TV channel or the signal, Closed captioning will not be available.

22
25 26
U^ZĂƟŶŐ Use the źbu on to highlight the “U^ZĂƟŶŐŝƚĞŵƚŚĞŶƉƌĞƐƐƚŚĞŹďƵƩŽŶ
entĞƌ into the following ŵenu.
TV Use the źbu on to highlight the “TVitĞŵ then Ɖƌess
Źbu on to entĞƌ into the following ŵĞŶƵ
Use the Ÿ/źbu ons to select the deƐŝƌed ƌa ng and
Ɖƌess the Źbu on to block oƌunblock ƌang.
MPAA The Movie ƌang (MPAA) is used foƌ ŽƌŝŐŝŶĂů ŵŽvies ƌated
by the Mo WŝĐƚƵƌeAssocia on (MPAA) as bƌoadcasted
on cable TV and not edited foƌtelevision.
Use the Ÿ/źbu ons to select N/AGPGPG-13 R
NC-17 oƌX.
RATING DESCRIPTION
G'ĞŶĞƌĂů Audiences. Movie is ĂƉƉƌŽƉƌŝĂƚĞ foƌ
all ages.
PG WĂƌĞŶƚĂů Guidance Suggested. May contain
ŵĂƚĞƌŝĂů not suited foƌyounŐĞƌ ǀŝĞǁĞƌƐ
PG-13 Contains content that ŵay not be
ĂƉƉƌŽƉƌŝĂƚĞ foƌǀŝĞǁĞƌƐ ƵŶĚĞƌthe age of 13.
RZĞƐƚƌŝĐƚĞĚContains adult contentno one
ƵŶĚĞƌ17 aĚŵi d without ƉĂƌĞnt.
NC-17 No one 17 and ƵŶĚĞƌĂĚŵŝ
XAdults only.
ĂŶĂĚĂZĂƟŶŐ Use theźbu on to highlight the “CanadĂZĂƟŶŐŝƚĞŵƚŚĞŶƉƌĞƐƐŹ
ďƵƩŽŶĞŶƚĞƌŝŶƚŽƚŚĞĨŽůůŽǁŝŶŐŵĞŶƵ
ĂŶĂda ŶŐlish Use the Ż/Źbu ons to select ĂŵŽŶŐ K&& C ϴн G
PG14+ and 18+.
ĂŶĂda FrĞŶĐŚ Use the Ż/Źbu ons to select ĂŵŽŶŐ K&& ' ϴĂŶƐн
ϭϯĂŶƐн 16ans+ and 18ans+.
RRT Se ŶŐ
Reset RRT Al
dŚŝƐĨĞĂƚƵƌĞŝƐĂĚŽǁŶůŽĂĚĂďůĞƌĂƟŶŐĮůƚĞƌďĂƐĞĚŽŶdsďƌŽĂĚĐĂƐƚƐ
tŝƚŚƚŚĞƚƌĂŶƐŝƟŽŶŽĨdsďƌŽĂĚĐĂƐƚƐƚŽĚŝŐŝƚĂůĨƵƚƵƌĞĐŚĂŶŐĞƐĂŶĚ
ĞŶŚĂŶĐĞŵĞŶƚƐŝŶŚŽǁdsƐŚŽǁƐĂƌĞƌĂƚĞĚĨŽƌĐŽŶƚĞŶƚĂƌĞƉŽƐƐŝďůĞ
low you to ƌeset the RRT se ng.
Exit
Exit

27 28
Customizing the CHANNEL Se ngs
Select TV source for example. (Press SOUCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the CHANNEL.
3. Use the Ÿ/źbu ons to highlight an individual CHANNEL , use the Ż/Źto
change the se and press the MENU to exit.
The CHANNEL menu includes the following :
If you select “Air” as input signal in Antenna item, you can press the Ź
bu on to search the channels automa cally.
The receivable channels will be stored automa cally.
When searching channels, press MENU to stop.
Use the źbu on to highlight the “Auto Scan”, then press the Ź
bu on to search the channels automa cally.
The receivable channels will be stored automa cally.
When searching channels, press MENU to stop.
Favorite
Channel list
Allow you t add these channels which you desired as the favorite
channels. Use the Ÿ/źbu ons to highlight the “Favorite” item, then
press the Źbu on to enter into the following menu.
Use the Ÿ/źbu ons to highlight the desired item, then press OK
bu on to add or remove the highlighted channel as favorite.
This feature shows the list of stored channels.
Show/Hide
Allow you to show or hide the channels.
Use the Ÿ/źbu ons to highlight the “Show/Hide” item, then press the
Źbu on to enter into the following menu.
4.6.
Exit
Exit
Air/Cable
Allows you to select antenna between Air and Cable.
If you select “Cable”, the following items
Auto Scan Use theźEXWWRQWRKLJKOLJKWWKH´$XWR6FDQ´LWHPWKHQSUHVVŹ
EXWWRQto enter into the following menu.
(Favorite, Channel List, Show/
Hide, Channel NO. and Channel Lable) are unable to use.

922
Use the Ÿ/źbu ons to highlight the desired item, then press OK
bu on to show or hide the highlighted channel.
Channel No. Display the number of current channel.
Channel Label Display the lable of current channel.
5. PC Mode
Se ng up your PC so ware (based on Windows XP)
The Windows display-se ngs for a typical computer are shown below. But the actual screen on
your PC will probably be diīerent, depending upon your par cular version of Windows and your
par cular video card. But even if your actual screen looks diīerent, the same, basic set-up
informa on will apply in almost all cases.
1. First, click on “Control Panel” on the Windows start menu.
2. When the control panel window appears, click on “Appearance and Themes” and a display
dialog-box will appear.
3. When the control panel window appears, click on “Display” and a display dialog-box will
appear.
4. Navigate to the “Se ng” tab on the display dialog-box. The correct size se ng (res
Op 1360×768.
If a ver cal-frequency on exists on your display se ngs dialog box, the correct value is “60Hz”.
Otherwise, just click “Enter” and exit the dialog box.
Res n Horizontal
Frequency (KHz) Frequency (Hz) Standard Mode
720x400 31.47 70 DOS
640x480 37.9 60 VGA
800x600 37.9 60 SVGA
1024x768 48.4 60 XVGA
1366x768 64 60 SXVGA
1920x1080 64 60 SXVGA
Exit

TV
TV
TV
6

and
RLED6515-UHD
Audio output Stereo R / L
Headphones Audio Output
OPTICAL Digital Audio Output
350
5000:1
6ms
3840x2160
220W
AC 100-120V~ 60Hz
USB(For service)
7
7