Reacher ACR-2P User manual

Radio Alarm Clock
ACR-2P
USER MANUAL

Features and Getting Started......................................1
Quick Getting Start......................................................2
Front Panel..................................................................3
Back Panel..................................................................4
Setting the Time..........................................................5
Setting the Alarm.........................................................6
Alarm ON / Alarm OFF.................................................8
SNOOZE and Dimmer.................................................9
FM Radio Play...........................................................10
Thermometer/Sleep Timer Setting............................11
Restore Factory Setting/Support/Warranty................12
Catalog

Thanks for your purchase from Reacher. Utmost care has
gone into the design and manufacturing of your clock.
Please read these instructions and keep the user manual
in safe place for future reference.
We made a instructional video on YouTube as below link
and QR code, just need to scan the code or enter the
video link and you can get the Intuitive operation of the
alarm clock radio.
Instructional Video
Link:https://youtu.be/BYWR4jfsOiU

1.FM Radio
2.Dual Alarm
3.Alarm Volume Adjustable
4.Snooze
5.12/24 Hour Switched
6.4-Level Dimmer of LCD Display
7.Sleep Timer(In FM mode)
8.USB Ports for Charging Your Phones
Features
Plug in the adapter into a standard household outlet to
get the clock working.
Insert 3 “AAA” batteries(Not Included) to preserve the
ALARM and TIME settings in case of power interruption.
Getting Started
1

2
Quick Getting Start
1
2
3
4
5
6
7
①Rotate - FM volume, time setting and alarm setting adjust;
Press - adjust brightness/Snooze when alarm goes off
② Short Press - Enter Previous Memory Station, Long Hold - Scan
Previous Station
③ Sleep Timer
④ Time Set(Enter Time Setting)
⑤ Short Press - Turn Radio ON/OFF, Long Hold - Scan and
Memory Station when FM is on
⑥ Short Press - Enter Next Memory Station, Long Hold - Scan
Next Station
⑦ Short Press - Enter alarm 1 or alarm 2 Setting, End today’s alarm
when alarm goes off, it will go off next day. Long Hold - Turn
ON/OFF alarm 1 or alarm 2

3
FRONT PANEL
8
9
10
12
11
13
⑧ AM/PM Appear in 12H Mode
⑨ Appear when Snoozing
⑩ Apear when sleep timer is on
⑪ Temperature
⑫ Alarm 1 and Alarm 2
⑬ Appear when FM is ON

4
BACK PANEL
15
14
16
17
18
⑭ Temperature Probe Hole
⑮ Adjust Alarm Volume
⑯ Temperature Switch(℃/℉)
⑰ 12H/24H Mode Switched
⑱ Charge Your Phones

1.Short press the button to enter the time setting. Revolve
the biggest button to set the right hour.
2.Short press or button to confirm the HOUR setting
and begin to set the MINUTES.
3.Revolve the biggest button to adjust MINUTES.
4.Short press the or button to confirm and exit the
time setting.
Note:
1.Press the “12/24H” time mode button in the back, to change
the time mode.
2.In 12H format, the “AM” will appear in the morning and the
“PM” will appear in the afternoon.
Setting The Time
5
Blink
Blink

6
1.Short press to enter Alarm 1 HOUR setting. Revolve
the to set the alarm hour you want.
2.Short press or to confirm the HOUR setting.
Revolve the to set the alarm minutes you want.
3.Short press or to confirm the MINUTE setting
and enter ring tone setting, revolve the to choose
ringtone. (Note: Total 1-6 ringtone optional, 1- 5 for
default ringtone, 6 for FM radio which is the last station
you listened)
Setting The Alarm
Blink
Blink

4.Short press or to confirm the Alarm 1 Setting.
5.The volume "+" "-" buttons on the back are used to
adjust the alarm volume, 0-16 levels are adjustable.
Note:
ALARM 1 and ALARM 2 are set in the same way.
7
Blink
Volume value will appear
when you are adjusting volume