Helping Teachers Make A Difference®© 2017 Really Good Stuff®1-800-366-1920 www.reallygoodstuff.com Made in China #164217
All instructional guides can be found online.
Congratulations on your purchase of
this Vertical Storage Rack.
Screw the 4 adjustable feet Jinto the
legs of the 2 side frames A.
Attach a stabilizer tube Cto a
horizontal bar B at the side hole
with a short screw F. Repeat for the
remaining tube Cand horizontal bar B.
Attach the straight part of an
assembled stabilizer piece to the top
holes on the 2 side frames with 2
rubber rings I and 2 large screws H,
making sure the threaded holes on
the side frames face inside. Attach
the edged end of the assembled
stabilizer bar to the side frame with a
short screw F.
2
J
L
A– 2 Side frames
B– 2 Horizontal bars
with holes
C– 2 Stabilizer tubes
D– 1 Horizontal bar
E– 9 Pouch bars
F– 4 Short screws
G– 18 Medium screws
H– 6 Large screws
I– 6 White rubber rings
J– 4 Adjustable feet
K– 2 Assembly tools
L– Fabric panel
This Really Good Stuff®product includes:
B
AE H
K
CDF G
1
You may also have received a spare part of each piece of hardware.
Wait until assembly is complete before fully tightening screws.
1
2
A
J
®
C
B
C
B
F
ChokeWarning_D.pdf 1 6/2/16 11:00 AM
3
3
A A
screw
rubber
rings
edged
end
screw
3
rubber rings
close-up view
I
Vertical Storage Rack Assembly Instructions
164217 Assembly.indd 2 6/2/17 12:10 PM
