Rebel STYLE CRAFT PRO User manual

PROFESSIONAL SHAVER
USER MANUAL
WITH SUPER-TORQUE MOTOR

Important Safety Instructions
Warning
Please read all the user instructions carefully before using.
• Inspect shaver prior to first use to ensure it is not damaged.
• Do not charge the shaver in an environment where temperature
is over 104 °F or under 32 °F .
• This shaver uses a re-chargeable lithium-ion battery.
• It must be disposed of in accordance with the local regulations.
• Do not disassemble the shaver, as it has sharp components.
• Incorrect assembly may result in injury.
•This shaver can be used by people with reduced physical,
sensory or mental capabilities or lack of experience an
knowledge under supervision or with proper instruction.
• DO NOT allow children to play with the appliance.
• Only use the accessories provided with the shaver.
• The shaver head (the foil and cutter) can be washed under water after
being detached from the shaver. DO NOT immerse the shaver in water.
• DO NOT disassemble this shaver.
• Incorrect assembly may result in electric shock or fire.
• DO NOT use compressed air, steel wool, abrasive detergent or corrosive
liquid (such as petroleum or acetone) to clean this shaver.
Cleaning

Important Safety Instructions
Please read all the user instructions carefully before using.
Storage
• Always store this shaver in a moisture-free area.
• DO NOT expose this shaver to direct and prolonged sunlight or other sources of heat.
• Keep out of reach of children.
Charging
• Shaver must be fully charged before initial use.
• Turn the shaver off before charging.
• Insert the terminal of adapter cord into the bottom of the shaver
and plug the adapter unit into a power outlet.
• After charging is finished, first remove the adapter from the power
outlet and then the adapter cord from the shaver.Shaver can be
used corded or cordless.

A- SHAVER BODY
1 -ON/OFF Switch
2 -LED Charging Indicator
3 -Foil Lock Button
B- FOIL ASSEMBLY
4 -Dual Foils
5 -Foil Support
C- Cord
D- Cleaning Brush
Product Structure

Shaver maintenance
Remove the foil assembly by pressing the foil lock button located on the left side
of the shaver. Grasp the foil assembly on both sides and gently remove from the shaver.
Use the cleaning brush (included)
to clean any debris on and around cutters.
Rinse the foil assembly under running water.
Allow time to dry completely before
reassembling onto the shaver.
Rusting may occur if components are
not completely dry.
1
2 3

LED charging indicator light
During operation, LED charging indicator light stays green
When the battery is low, LED charging indicator light flashes in red.
During charging, LED charging indicator light flashes in green.
When charging finishes, LED charging indicator light stays in green.