Rec Tec Grills WyldSide RT-A850 User manual

©2019, Rec Tec Industries, LLC
Model # RT-A850
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
1
Questions? Call or check out our FAQ!
Letter from Ray & Ron 2
Warnings 3
Important Safety Information 4
Carton Contents 5
Assembling Your REC TEC WyldSide 6
Accessory Instsllations 19
Specs 22
Operating Your Grill 23
Transport & Storage 28
Warranty 30
Tips, Tricks, & Temps 25
Maintenance & Cleaning 27
Cooking Notes 29

©2019, Rec Tec Industries, LLC
2
With proper care and maintenance, your grill will provide you years
of trouble free operation. Please review the following information
carefully for useful tips and information that will help you utilize
your grill’s extensive features and benets.
Your REC TEC WyldSide is by far and away the most bang for
your buck and comes fully loaded with high quality construction
that makes your cooking experience enjoyable and stress free.
With direct ame cooking, we’re taking the art of grilling back to
the simplest of methods. Grilling your favorite foods over an open
ame adds avor proles that can only come from real re.
We want you to join the vibrant and growing community of REC
TEC owners. Whether you want to contribute your own tips and
recipes, learn from others, or a bit of both, please jump right in.
You now have an incredible tool for cooking. Let’s see how you
use it!
Join our online community at:
Thank you for choosing REC TEC GRILLS!
Ray Carnes & Ron Cundy, Co-Founders, REC TEC Industries, LLC
Congratulations on the purchase of your new
REC TEC WyldSide Argentina Style Grill!
Questions? Call or check out our FAQ!
Website: rectecgrills.com
Facebook: facebook.com/RECTECGrills
Twitter: twitter.com/rectecgrills
YouTube: youtube.com/rectecgrills
Instagram: instagram.com/rectecgrills

©2019, Rec Tec Industries, LLC
3
WARNING!
FOR OUTDOOR USE ONLY!
DO NOT STORE OR USE
COMBUSTIBLE MATERIALS IN OR
NEAR THIS APPLIANCE.
TO PREVENT INJURY, NEVER ATTEMPT
TO MOVE GRILL WHILE HOT, OR
WITHOUT ASSISTANCE.
NEVER STORE ANY GRILL IN A SMALL
SPACE OR PLACE IN A VEHICLE
UNLESS COMPLETELY COOL AND
FIRE IS VERIFIED AS EXTINGUISHED.
LEAVE A MINIMUM OF 60”
CIRCUMFERENCE BETWEEN
GRILL, DECKS, HOUSES OR ANY
COMBUSTIBLE MATERIALS.
USE ON LEVEL GROUND AWAY
FROM OVERHANGING ROOFS
OR EAVES.
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
4
Important Safety Information
Warning: Read all Safety Information Before Operating Grill
For outdoor use only. Do not use this grill for other
than its intended purchase.
REC TEC Grills strongly advises against using lighter
uid during the operation of your grill.
Do not use alcohol, kerosene, or alcohol for lighting
charcoal. Use of any of these or similar products
could cause an explosion possibly leading to severe
bodily injury and/or equipment damage.
In windy weather, place grill in an outdoor area that
is protected from the wind.
Never leave coals and/or ashes in grill unattended.
Before leaving grill unattended, remaining coals and/
or ashes must be removed from grill. Carefully place
remaining coals and/or ashes in a non-combustible
metal container and completely saturate with water.
Allow coals and water to remain in metal container at
least 24 hours before disposal.
Extinguished coals and/or ashes should be placed
a safe distance from all structures and combustible
materials.
With a garden hose, completely wet the surface
beneath and around grill to extinguish any ashes,
coals, and/or embers, which may have fallen during
the cooking or cleaning process.
Use caution to protect yourself and property.
Use common sense practices at all times when
operating or moving your REC TEC grill.
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
Your carton contains the following:
• 1 preassembled grill body (#1)
• 1 WyldSide lift frame (#2)
• 1 crank wheel (#3)
• 1 side shelf with attached pull bar (#4)
• 1 grilling grate frame (#5)
• 2 pull bar handles (#6)
• 2 chrome locking washers (#7)
• 2 locking caster wheels (#8)
• 2 xed wheels (#9)
• 1 rotisserie motor mount receiving bracket (#10)
• 1 rotisserie cradle bracket (#11)
• 1 rotisserie drive motor (#12)
• 1 rotisserie drive motor mount bracket (#13)
• 3 counter balance weights - large: 11.2 oz
medium: 7.7 oz small: 4.1 oz (#14)
• 1 spit rod handle (#15)
• 4 spit rod forks (#16)
• 1 thermometer (#17)
• 1 hardware pack (#18)
• 1 spit rod with spit rod bushings and
chrome locking washers - (#19)
• 1 crank wheel brake (#20)
• 1 lid (#21)
• 2 grill grates (#23)
• 2 removable hanging double hooks (#24)
Please note that during shipping some movement may
have taken place, so a complete visual inspection is
required. Be sure to inspect entire grill after removing
the protective shipping carton. Some surfaces may
be sharp, so wear gloves when assembling.
DO NOT PLUG IN THE GRILL UNTIL IT IS FULLY
ASSEMBLED AND YOU’RE READY TO COOK.
5
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
DO NOT
ASSEMBLE
ALONE!
6
With assistance, lay preassembled grill
body (#1) onto its back with the warmer
box side up to complete the next step.
Tip: Flatten the cardboard box out and lay
everything on it. This serves as a good working
area and it helps prevent the grill from getting
scratched or damaged during installation.
Step 1:
Unpack and Prepare for Assembly
Unpack all contents, including the metal
plate inside the cooking chamber of the grill.
Be careful, metal plate will
move and is very heavy!
Leave brackets zip tied to lift frame
for easier installation until step 6.
Use caution when unpacking lift frame and grill. Secure
lift frame when removing plastic packaging material.
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
Step 2:
Attach Wheels to Bottom of Grill
For each wheel, you will need 4 bolts, 4
locking washers, and 4 at washers found
in the hardware pack (#18). Use this bolt
assembly order for installation: bolt, lock
washer, at washer, wheel, grill.
Attach 2 locking caster wheels on the
LEFT(controlside)bottomsideofthegrill.
Attach 2 Fixed Wheels (#9) on
the RIGHT bottom side of grill.
Hand tighten until all
screws are in place.
7
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
Step 3:
Stand Grill Upright
Ensure all caster bolts are fully tightened
and wheels are locked before standing
grillup.Withassistance,standgrillbody
upright and lock the caster wheels.
LOCKED &
CORRECT
UNLOCKED&
INCORRECT
LOCK CASTER WHEELS!
Step 4:
Install Metal Plate
Reinsert metal plate at bottom
of grill cooking chamber.
DO NOT ATTEMPT TO
COMPLETE STEP 3 ALONE
WITHOUT ASSISTANCE!
8
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
Step 5:
Install WyldSide Lift Frame
Slide WyldSide lift frame (#2) into the top
of the preassembled grill body (#1). Cog
wheel side of the lift frame should be on
the RIGHT. Secure using 8 large bolts and
washers found in the hardware pack (#18).
Hand tighten until all
screws are in place.
9
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
10
Step 6:
Install Grate Bracket Supports
Use scissors to remove zip ties from
brackets. Make sure all lift frame
wires are free and untangled before
installing bracket supports.
Rotisserie cradle bracket
(#11) is on the RIGHT
(cog side) of the lift frame.
Rotisserie drive motor mount
receiving bracket (#13) on
the LEFT (controller side) of
the lift frame.
Rotisserie drive motor mount receiving bracket (#13)
Rotisserie cradle bracket (#11)
Slide grate bracket supports
into WyldSide lift frame (#2).
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
Step 7:
Install Grilling Grate Frame
Attach grilling grate frame (#5) to grate
bracket supports (#11 & #13) by placing
brackets on top of grilling grate frame.
Secure grilling grate frame into
placeusing4shortbolts,4washers,
and 4 nuts, from the hardware
pack (#18). Use this bolt assembly
order for installation: bolt, bracket,
frame, washer, lock washer, nut.
11
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
12
Step 8:
Inspect Side Shelf
Check side shelf with attached pull bar (#4)
for fan obstruction by looking into fan hole.
Step 9:
Install Side Shelf
Using 6 large bolts and 6
at washers found in the
hardware packet (#18),
attach the side shelf (#4) to
the left side of the grill body.
Hand tighten until all
screws are in place.
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
13
Step 10:
Install Pull Bar Handles
Secure rst pull bar handle (#6) to warmer box with 4 short
bolts, 4 at washers, 4 lock washers, and 4 nuts (#18). Use
this bolt assembly order for installation: bolt, pull bar handle,
warmer box door, at washer, locking washer, nut.
Install Final Pull Bar Handle
Secure the second pull bar handle (#6) to the right side
of the grill with 4 large bolts and 4 lock washers, 4 at
washers(#18). Use this bolt sssembly order for installation:
bolt, pull bar handle, grill, at washer, locking washer.
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
14
Step 11:
Install Thermometer
Attachthermometer(#17)tofrontleftside
of warmer box door by hand tightening
gripped washer on the inside of the door
to secure it into place.
Step 12:
Install Bull Emblem
Attach bull emblem (# ) to front right side of warmer
box door by placing mounting bracket on the inside
of door. Use 2 bolts, 2 locking washers, and 2 at
washers to secure the bracket, and emblem to the
warmer box drawer.
Make sure bull emblem is facing right side up when installed.
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
15
Step 13:
Finish Warmer Box
Make sure all packing material and tape is
removed from the warmer box. Insert the
warmer box grate (#22) into the warmer box.
There are two positions for your warming grate.
Be mindful of the thermometer when
inserting the warmer box grate.
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
16
Step 14:
Install Crank Wheel Brake
Attach crank wheel brake with one
long black bolt above cog wheel.
Make sure handle is in position between
cog wheel and stopping pin.
Step 15:
Install Crank Wheel
Attach the Crank Wheel (#3) to
spit rod using locking pin to secure
wheeltoWyldSideLift Frame(#2).
USE TWO HANDS AT ALL
TIMES WHEN OPERATING THE
CRANK WHEEL AND BRAKE.
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
17
CORRECT RESTING POSITION
Step 16:
Place Grilling Grates
Wash both grilling grates (#23) with mild soap and water before
placing onto the grill. Ensure crank wheel brake (#20) is in the locked
position. Insert grilling grates onto grate frame (#5).
IMPROPER RAISED POSITION
Have Grilling Grate frame in the resting position before placing
grates in the frame or you risk harming yourself or others.
USE TWO HANDS AT ALL
TIMES WHEN OPERATING THE
CRANK WHEEL AND BRAKE.
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
18
Step 18:
Congratulations!
Yourgrillis nowbuilt!You can
now install your removable
hanging double hooks and
rotisserie accessories.
Step 17:
Install Handles to Lid
Using preinstalled hardware on handles,
attach each handle to the stainless steel
lid using this assembly order: Bolt, locking
washer, at washer, lid, handle.
Hand tighten until all
screws are in place.
Questions? Call or check out our FAQ!

©2019, Rec Tec Industries, LLC
19
Install Removable Hanging Double Hooks
Step 1: Remove Pin and Place
Remove pin and bolt to place removable hanging
double hooks over the top of the WyldSide lift frame.
Step 2: Adjust and Secure
Replace bolt and pin to secure each hook to
the frame. Slide hooks to desired positions.
Questions? Call or check out our FAQ!