RedNeck Deer User manual

STEP 2:   
    
    
  







"J··



 



"A"
STEP 3:  
  
      
       
   
     
    
STEP 3: If installing a 6x6 Buck Palace Blind, install
the 6x6 front braces, while attaching the blind to
the frame. Check the inside of the blind for the
Braces and Instructions.






 
STEP 4:    
 
  
    
 
     
    



"Fu
   


Figure 4.1
STEP 5:     
     
   
  
        
 

Holes for optional
pins not included.

STEP 14: Tighten and install the (2) supplied Ladder
Stabilizers, part AA, until platform and ladder are securely
tightened together; removing any slack/movement in the
ladder.

AA 2 * Ladder Stabilizers

5’ 7.75” 5’ 7.75”
The footprint on the 5’ stand is 5 feet
7.75 inches by 5 feet 7.75 inches
square (5’ 7.75” X 5’ 7.75”). This
measurement is from the center of the
rebar stake hole in the Leg Foot.