Redsbaby Paloma User manual

INSTRUCTION MANUAL
PALOMA COT

2
Contents
General instructions 3
Warranty information 4
Warnings and safety precautions 6
Components and parts 8
Assembly instructions 9
Care and cleaning 14

3
General Instructions
Thank you for choosing Redsbaby for your family.
This document contains important information and must be kept for future reference.
Please read thoroughly before commencing assembly of your Redsbaby PALOMA Cot. It is
critical that you follow these assembly instructions in detail to ensure the safety features of
your PALOMA Cot are not compromised. Incorrect assembly and use can be dangerous and
result in serious injury or even death.
If there are any missing parts or you have any questions regarding assembly, please contact
us via [e-mail].
There may be slight variations in the design of your product to that shown in the images of
this instruction manual.
The Redsbaby PALOMA Cot is designed to comply with
AS/NZS: 2172:2013 and CPN No. 6:2005
Redsbaby Pty Ltd
[e-mail]
www.redsbaby.com.au
This product was proudly designed in Sydney, Australia.
Redsbaby is Australian owned and operated.

4
Warranty information
12 Month Warranty
The Redsbaby PALOMA Cot comes with a 12 Month Warranty to cover against faults in
materials and workmanship when your products are used under normal conditions,
according to our user manuals and technical specifications.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
The 12 Month Warranty period starts from the date your product(s) are dispatched from our
warehouse. This includes products that are purchased via pre-sale (for example items that
are out of stock or newly launching products). Please remember that for a claim to be valid,
it must be made within the claims period.
There are a few circumstances under which the warranty is not valid including:
- defects resulting from improper care or use;
- normal wear and tear, including scratches to the cot frame;
- products that are purchased second hand or from an unauthorised distributor;
- faulty or incorrect assembly; and
- using a part or accessory that is not compatible with the product and/or not manufactured
by Redsbaby.
Please ensure you follow the assembly instructions, which can be found in this instruction
manual.

5
How To Make A Warranty Claim
Send an email to [e-mail] to notify us of your warranty claim. To validate
your warranty claim we will require you to include in your email:
- a description of the warranty defect including photographs;
- your contact details;
- attached invoice with order number; and
- product batch number (the batch number is printed on a sticker that is located on upper
surface of the mattress baseboard).
We will respond to your warranty claim within 7 business days and depending on the nature
of the warranty claim, provide a replacement of the damaged part or arrange collection of
the product from your nominated address. Collection will take place on a business day (i.e.
not a public holiday or weekend within your state or territory) between 7am and 5.30pm.
Please take care to repack the product in secure and stable packaging to avoid any damage
occurring in the returns transit. We do not take responsibility for any damage that occurs
in transit. Once we have received your product we will inspect and confirm the reported
defect. We will then contact you with further information surrounding the repair such as the
estimated turn around time.
If you have any questions, you can contact us at [e-mail].

6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly before
using your Redsbaby PALOMA Cot. Incorrect assembly and use can result in
serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
690 mm wide by 1300 mm long and 130 mm in thickness. The width and length
are specified because it is important that the gaps between the mattress and
the sides and ends of the cot will not exceed 40 mm when the mattress is
pushed to one side or end, and 20 mm when the mattress is centered in the
cot. The thickness of the mattress has been specified to ensure that the depth
of the cot is greater than 500 mm with the mattress base in the lower position
to minimize the risk of a child climbing or falling out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE
ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL THE
CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE TIGHT. CARE
SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE BECAUSE A CHILD COULD
TRAP PARTS OF THE BODY OR CLOTHING WHICH WOULD POSE A RISK OF
STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 130MM.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly before
using your Redsbaby PALOMA Cot. Incorrect assembly and use can result in
serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
690 mm wide by 1300 mm long and 130 mm in thickness. The width and length
are specified because it is important that the gaps between the mattress and
the sides and ends of the cot will not exceed 40 mm when the mattress is
pushed to one side or end, and 20 mm when the mattress is centered in the
cot. The thickness of the mattress has been specified to ensure that the depth
of the cot is greater than 500 mm with the mattress base in the lower position
to minimize the risk of a child climbing or falling out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE
ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL THE
CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE TIGHT. CARE
SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE BECAUSE A CHILD COULD
TRAP PARTS OF THE BODY OR CLOTHING WHICH WOULD POSE A RISK OF
STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 130MM.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly
before using your Redsbaby Paloma Cot. Incorrect assembly and use can
result in serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
700 mm wide by 1300 mm long and 120 mm in thickness. The width and
length are specied because it is important that the gaps between the
mattress and the sides and ends of the cot will not exceed 40 mm when
the mattress is pushed to one side or end, and 20 mm when the mattress
is centered in the cot. The thickness of the mattress has been specied to
ensure that the depth of the cot is greater than 500 mm with the mattress
base in the lower position to minimize the risk of a child climbing or falling
out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD
BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN
SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL
THE CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE
TIGHT. CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE
BECAUSE A CHILD COULD TRAP PARTS OF THE BODY OR CLOTHING
WHICH WOULD POSE A RISK OF STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 120MM.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly
before using your Redsbaby Paloma Cot. Incorrect assembly and use can
result in serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
700 mm wide by 1300 mm long and 120 mm in thickness. The width and
length are specied because it is important that the gaps between the
mattress and the sides and ends of the cot will not exceed 40 mm when
the mattress is pushed to one side or end, and 20 mm when the mattress
is centered in the cot. The thickness of the mattress has been specied to
ensure that the depth of the cot is greater than 500 mm with the mattress
base in the lower position to minimize the risk of a child climbing or falling
out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD
BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN
SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL
THE CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE
TIGHT. CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE
BECAUSE A CHILD COULD TRAP PARTS OF THE BODY OR CLOTHING
WHICH WOULD POSE A RISK OF STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 120MM.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly before
using your Redsbaby PALOMA Cot. Incorrect assembly and use can result in
serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
690 mm wide by 1300 mm long and 130 mm in thickness. The width and length
are specified because it is important that the gaps between the mattress and
the sides and ends of the cot will not exceed 40 mm when the mattress is
pushed to one side or end, and 20 mm when the mattress is centered in the
cot. The thickness of the mattress has been specified to ensure that the depth
of the cot is greater than 500 mm with the mattress base in the lower position
to minimize the risk of a child climbing or falling out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE
ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL THE
CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE TIGHT. CARE
SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE BECAUSE A CHILD COULD
TRAP PARTS OF THE BODY OR CLOTHING WHICH WOULD POSE A RISK OF
STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 130MM.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly
before using your Redsbaby Paloma Cot. Incorrect assembly and use can
result in serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
700 mm wide by 1300 mm long and 120 mm in thickness. The width and
length are specied because it is important that the gaps between the
mattress and the sides and ends of the cot will not exceed 40 mm when
the mattress is pushed to one side or end, and 20 mm when the mattress
is centered in the cot. The thickness of the mattress has been specied to
ensure that the depth of the cot is greater than 500 mm with the mattress
base in the lower position to minimize the risk of a child climbing or falling
out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD
BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN
SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL
THE CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE
TIGHT. CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE
BECAUSE A CHILD COULD TRAP PARTS OF THE BODY OR CLOTHING
WHICH WOULD POSE A RISK OF STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 120MM.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly
before using your Redsbaby Paloma Cot. Incorrect assembly and use can
result in serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
700 mm wide by 1300 mm long and 120 mm in thickness. The width and
length are specied because it is important that the gaps between the
mattress and the sides and ends of the cot will not exceed 40 mm when
the mattress is pushed to one side or end, and 20 mm when the mattress
is centered in the cot. The thickness of the mattress has been specied to
ensure that the depth of the cot is greater than 500 mm with the mattress
base in the lower position to minimize the risk of a child climbing or falling
out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD
BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN
SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL
THE CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE
TIGHT. CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE
BECAUSE A CHILD COULD TRAP PARTS OF THE BODY OR CLOTHING
WHICH WOULD POSE A RISK OF STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 120MM.

7
GENERAL WARNINGS
· Follow the manufacturer’s assembly instructions in detail to ensure the safety
features of the cot are not compromised.
· Ensure the cot is placed at a reasonable distance from curtains, blinds,
heaters and power points.
· Keep medication, string, elastic, small toys or small items, such as money, out
of reach from any position in the cot.
· Keep cot free of any toys, cushions etc that could be used as a foothold or
present a danger of suocation or strangulation.
· Aer unpacking, immediately discard any plastic wrapping and packaging
materials, as these can lead to a choking hazard.
· Do not use the cot if any part is broken, torn or missing and use only spare
parts approved by the manufacturer.
· Do not use if parts are missing and do not substitute parts, contact Redsbaby
for replacement parts.
· Do not use more than one mattress in the cot.
· When the child is able to climb out or reaches the height of 90cm, the cot
should no longer be used, and should be converted to the toddler bed using
the Redsbaby PALOMA Toddler Rail included with your cot.
WARNING:
DO NOT DRAG YOUR PALOMA FURNITURE ALONG THE GROUND, AS THIS MAY
RESULT IN THE LEGS BREAKING. TO MOVE, USE TWO PEOPLE TO LIFT AND
REPOSITION.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly before
using your Redsbaby PALOMA Cot. Incorrect assembly and use can result in
serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
690 mm wide by 1300 mm long and 130 mm in thickness. The width and length
are specified because it is important that the gaps between the mattress and
the sides and ends of the cot will not exceed 40 mm when the mattress is
pushed to one side or end, and 20 mm when the mattress is centered in the
cot. The thickness of the mattress has been specified to ensure that the depth
of the cot is greater than 500 mm with the mattress base in the lower position
to minimize the risk of a child climbing or falling out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE
ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL THE
CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE TIGHT. CARE
SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE BECAUSE A CHILD COULD
TRAP PARTS OF THE BODY OR CLOTHING WHICH WOULD POSE A RISK OF
STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 130MM.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly
before using your Redsbaby Paloma Cot. Incorrect assembly and use can
result in serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
700 mm wide by 1300 mm long and 120 mm in thickness. The width and
length are specied because it is important that the gaps between the
mattress and the sides and ends of the cot will not exceed 40 mm when
the mattress is pushed to one side or end, and 20 mm when the mattress
is centered in the cot. The thickness of the mattress has been specied to
ensure that the depth of the cot is greater than 500 mm with the mattress
base in the lower position to minimize the risk of a child climbing or falling
out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD
BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN
SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL
THE CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE
TIGHT. CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE
BECAUSE A CHILD COULD TRAP PARTS OF THE BODY OR CLOTHING
WHICH WOULD POSE A RISK OF STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 120MM.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly
before using your Redsbaby Paloma Cot. Incorrect assembly and use can
result in serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
700 mm wide by 1300 mm long and 120 mm in thickness. The width and
length are specied because it is important that the gaps between the
mattress and the sides and ends of the cot will not exceed 40 mm when
the mattress is pushed to one side or end, and 20 mm when the mattress
is centered in the cot. The thickness of the mattress has been specied to
ensure that the depth of the cot is greater than 500 mm with the mattress
base in the lower position to minimize the risk of a child climbing or falling
out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD
BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN
SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL
THE CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE
TIGHT. CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE
BECAUSE A CHILD COULD TRAP PARTS OF THE BODY OR CLOTHING
WHICH WOULD POSE A RISK OF STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 120MM.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly before
using your Redsbaby PALOMA Cot. Incorrect assembly and use can result in
serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
690 mm wide by 1300 mm long and 130 mm in thickness. The width and length
are specified because it is important that the gaps between the mattress and
the sides and ends of the cot will not exceed 40 mm when the mattress is
pushed to one side or end, and 20 mm when the mattress is centered in the
cot. The thickness of the mattress has been specified to ensure that the depth
of the cot is greater than 500 mm with the mattress base in the lower position
to minimize the risk of a child climbing or falling out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE
ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL THE
CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE TIGHT. CARE
SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE BECAUSE A CHILD COULD
TRAP PARTS OF THE BODY OR CLOTHING WHICH WOULD POSE A RISK OF
STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 130MM.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly
before using your Redsbaby Paloma Cot. Incorrect assembly and use can
result in serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
700 mm wide by 1300 mm long and 120 mm in thickness. The width and
length are specied because it is important that the gaps between the
mattress and the sides and ends of the cot will not exceed 40 mm when
the mattress is pushed to one side or end, and 20 mm when the mattress
is centered in the cot. The thickness of the mattress has been specied to
ensure that the depth of the cot is greater than 500 mm with the mattress
base in the lower position to minimize the risk of a child climbing or falling
out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD
BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN
SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL
THE CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE
TIGHT. CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE
BECAUSE A CHILD COULD TRAP PARTS OF THE BODY OR CLOTHING
WHICH WOULD POSE A RISK OF STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 120MM.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly
before using your Redsbaby Paloma Cot. Incorrect assembly and use can
result in serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
700 mm wide by 1300 mm long and 120 mm in thickness. The width and
length are specied because it is important that the gaps between the
mattress and the sides and ends of the cot will not exceed 40 mm when
the mattress is pushed to one side or end, and 20 mm when the mattress
is centered in the cot. The thickness of the mattress has been specied to
ensure that the depth of the cot is greater than 500 mm with the mattress
base in the lower position to minimize the risk of a child climbing or falling
out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD
BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN
SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL
THE CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE
TIGHT. CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE
BECAUSE A CHILD COULD TRAP PARTS OF THE BODY OR CLOTHING
WHICH WOULD POSE A RISK OF STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 120MM.

8
Components and parts
S3 x 26 S5 x 4S4 x 4
A x 1
C x 1D x 2 E x 2
H x 1
WARNING:
THIS PACKAGE CONTAINS SMALL PARTS. KEEP AWAY FROM CHILDREN UNTIL
ASSEMBLED. STORE ALL PACKAGING AND EXCESS PARTS AWAY FROM A CHILD’S
REACH AS SOON AS THE PRODUCT IS ASSEMBLED.
H x 4
ASSEMBLY INSTRUCTIONS
Baby Cot
Product Code: NSRB-1703001
This package contains small parts.
Keep away from children until
assembled.
WARNING:
S3 X 10
S3 X 12
A X 1
B X 4
C X 1
1
2
3
S3 X 26 S4 X 4
S5 X 4 H X 1
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly before
using your Redsbaby PALOMA Cot. Incorrect assembly and use can result in
serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
690 mm wide by 1300 mm long and 130 mm in thickness. The width and length
are specified because it is important that the gaps between the mattress and
the sides and ends of the cot will not exceed 40 mm when the mattress is
pushed to one side or end, and 20 mm when the mattress is centered in the
cot. The thickness of the mattress has been specified to ensure that the depth
of the cot is greater than 500 mm with the mattress base in the lower position
to minimize the risk of a child climbing or falling out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE
ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL THE
CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE TIGHT. CARE
SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE BECAUSE A CHILD COULD
TRAP PARTS OF THE BODY OR CLOTHING WHICH WOULD POSE A RISK OF
STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 130MM.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly
before using your Redsbaby Paloma Cot. Incorrect assembly and use can
result in serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
700 mm wide by 1300 mm long and 120 mm in thickness. The width and
length are specied because it is important that the gaps between the
mattress and the sides and ends of the cot will not exceed 40 mm when
the mattress is pushed to one side or end, and 20 mm when the mattress
is centered in the cot. The thickness of the mattress has been specied to
ensure that the depth of the cot is greater than 500 mm with the mattress
base in the lower position to minimize the risk of a child climbing or falling
out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD
BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN
SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL
THE CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE
TIGHT. CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE
BECAUSE A CHILD COULD TRAP PARTS OF THE BODY OR CLOTHING
WHICH WOULD POSE A RISK OF STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 120MM.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly
before using your Redsbaby Paloma Cot. Incorrect assembly and use can
result in serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
700 mm wide by 1300 mm long and 120 mm in thickness. The width and
length are specied because it is important that the gaps between the
mattress and the sides and ends of the cot will not exceed 40 mm when
the mattress is pushed to one side or end, and 20 mm when the mattress
is centered in the cot. The thickness of the mattress has been specied to
ensure that the depth of the cot is greater than 500 mm with the mattress
base in the lower position to minimize the risk of a child climbing or falling
out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD
BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN
SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL
THE CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE
TIGHT. CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE
BECAUSE A CHILD COULD TRAP PARTS OF THE BODY OR CLOTHING
WHICH WOULD POSE A RISK OF STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 120MM.

9
S2 X 4
S1 X 4
S3 X 12
S3 X 10
Assembly instructions
WE RECOMMEND TWO (2) ADULTS ASSEMBLE THE PALOMA COT.
IMPORTANT CHECKPOINT:
DO NOT PROCEED UNTIL YOU ENSURE THE HEAD AND END BOARD ARE FULLY
ALIGNED WITH THE SIDE BOARDS. IF THE HEAD/END BOARD SIT AT A DIFFERENT
HEIGHT TO THE SIDEBOARDS, YOU HAVE NOT ASSEMBLED THE COT CORRECTLY.
Step 1
Step 2
S3
x 12
ASSEMBLY INSTRUCTIONS
Baby Cot
Product Code: NSRB-1703001
This package contains small parts.
Keep away from children until
assembled.
WARNING:
S3 X 10
S3 X 12
A X 1
B X 4
C X 1
1
2
3
S3 X 26 S4 X 4
S5 X 4 H X 1
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly before
using your Redsbaby PALOMA Cot. Incorrect assembly and use can result in
serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
690 mm wide by 1300 mm long and 130 mm in thickness. The width and length
are specified because it is important that the gaps between the mattress and
the sides and ends of the cot will not exceed 40 mm when the mattress is
pushed to one side or end, and 20 mm when the mattress is centered in the
cot. The thickness of the mattress has been specified to ensure that the depth
of the cot is greater than 500 mm with the mattress base in the lower position
to minimize the risk of a child climbing or falling out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD BE
ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL THE
CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE TIGHT. CARE
SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE BECAUSE A CHILD COULD
TRAP PARTS OF THE BODY OR CLOTHING WHICH WOULD POSE A RISK OF
STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 130MM.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly
before using your Redsbaby Paloma Cot. Incorrect assembly and use can
result in serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
700 mm wide by 1300 mm long and 120 mm in thickness. The width and
length are specied because it is important that the gaps between the
mattress and the sides and ends of the cot will not exceed 40 mm when
the mattress is pushed to one side or end, and 20 mm when the mattress
is centered in the cot. The thickness of the mattress has been specied to
ensure that the depth of the cot is greater than 500 mm with the mattress
base in the lower position to minimize the risk of a child climbing or falling
out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD
BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN
SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL
THE CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE
TIGHT. CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE
BECAUSE A CHILD COULD TRAP PARTS OF THE BODY OR CLOTHING
WHICH WOULD POSE A RISK OF STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 120MM.
6
Warnings and safety precautions
Please read the following warnings and safety precautions thoroughly
before using your Redsbaby Paloma Cot. Incorrect assembly and use can
result in serious injury or death.
RECOMMENDED MATTRESS SIZE
This cot has been manufactured for use with a mattress which measures
700 mm wide by 1300 mm long and 120 mm in thickness. The width and
length are specied because it is important that the gaps between the
mattress and the sides and ends of the cot will not exceed 40 mm when
the mattress is pushed to one side or end, and 20 mm when the mattress
is centered in the cot. The thickness of the mattress has been specied to
ensure that the depth of the cot is greater than 500 mm with the mattress
base in the lower position to minimize the risk of a child climbing or falling
out of the cot.
WARNING
· TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD
BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN
SIT UP.
· TO ENSURE THE SAFETY OF YOUR COT, REGULARLY CHECK ALL
THE CONNECTING BOLTS, PINS AND NUTS ENSURING THEY ARE
TIGHT. CARE SHOULD BE TAKEN THAT NO SCREWS ARE LOOSE
BECAUSE A CHILD COULD TRAP PARTS OF THE BODY OR CLOTHING
WHICH WOULD POSE A RISK OF STRANGULATION.
· TO PREVENT FALLS OR SUFFOCATION THE MAXIMUM MATTRESS
THICKNESS SHOULD NOT EXCEED 120MM.

10
S2 X 4
S1 X 4
S3 X 12
S3 X 10
Step 3
S3 X 10
x 10
S3