RefStuff RefScorer User manual

USER INSTRUCTION INFORMATION MANUAL: QUICK GUIDE
#groundbreaking #gamechanging #gamechanger

DON'T FORGET... all this is in addition to being able to select Home and Away team colours
AND Record the Score of the Game! - the WORLDS FIRST and only digital watch to do this!!!

Already packed with many referee-specific features like preset match timers for 3, 5, 10, 12,
15, 20, 25, 30, 35, 40, 45, 60 and 90 minutes, your choice of Count-Up or Count-Down time
in RefScorer Mode, auto-elapsing extra/added time for when the regulation time is over as
well as your optional choice of vibration, beep or both at the same time!
1/100 Second Stop Watch, Daily Alarm Timer, 12/24 Hour Formats, Current/Actual time,
(Date, Day, Month, Year), Backlight, Water Resistant to 50m, Long Lasting Battery, 1 Year
Warranty.
With its all-weather construction and groundbreaking, gamechanging features, this is by far
the most innovative watch available to all referees around the world!
* Old School Classic with New Cool Tech *
RefScorer Digital is an absolute groundbreaking game changer in referee watches and now
comes packed with even more incredible features. In addition to it being the worlds first
and only digital watch that allows you to select home and away team colours AND record
the score throughout the match!
- The INCREDIBLE Interchangeable Different Coloured Top Rings/Bezels!!! –personalise
and pair your watch to match the colour of your Referee shirt or outfit that you are wearing
for your match!
The RefScorer Digital Watch v2.021 will come supplied with the Silver & Black Top
Ring/Bezel as seen in the pictures.
Additional Colours will be available to purchase in packs of 5.
SPECIAL GOLD TOP RING/BEZEL! - will you be the lucky
recipient of one of only 100 Special GOLD Top Ring/Bezels
hidden inside the watch pouch cases?!!?
Find one and take a picture, tag us on all social media
@refscorer and you'll be sent a one time huge discount
code to be used in our store!

The 6 Watch Face Modes/Features
SETTING AND SELECTING VIBRATION AND BEEP ALERTS
Vibrate & Beep Alerts for Match
Day use are easily selected from
the Normal Time Mode/Screen.
Single press of the SELECT button
turns the Vibrate function on/off.
Single press of the ADJUST button
turns the Beep function on/off.
You can also operate the Vibrate & Beep Alerts
from the Alarm Time Mode/Screen.
Hold the ADJUST button for 3 seconds and then
the screen will flash. Scroll through the features
pressing the MODE button.
Here you can set an alarm, and also toggle the
Vibrate & Beep Alerts on/off.
*Press the Start/Stop button to toggle the Alarm
on/off.

NORMAL TIME MODE/SCREEN
REFSCORER MATCH DAY SCORE MODE/SCREEN
The Normal Time Mode/Screen allows you to
set the Time - Date, Day, Month, Year, choose
12/24 Hour Format, and even have an hourly
chime alert or toggle the button sound on/off.
Hold the ADJUST button for 3 seconds and then
the screen will flash. Scroll through the features
pressing the MODE button and press SELECT and
RESET to change the values.
Team Kick Off Reminder –Select the Home or
Away Team, smartly indicated with the whistle
icon for whichever Team wins the Kick Off of the
match, simply by pressing ADJUST for the Home
Team or SELECT for the Away Team. Easy!
Count-Down, Count-Up or Count Continue Timers –Select your choice by simply
pressing the RESET button.
Preset Match Timers –Select from 3, 5, 10, 12, 15, 20, 25, 30, 35, 40, 45, 60 and 90
minutes. Hold the SELECT button for 3 seconds and then the screen will flash. Scroll
through the Preset Timers by pressing the START/STOP button until you find your
choice. Press the ADJUST button to lock in your choice and return to the Match Day
Score Mode/Screen.

Selecting Home and Away team colours –
Hold the ADJUST button for 3 seconds and then
the screen will flash with the ‘H’ letter, allowing
you to select the Home Team colour.
Press the SELECT button to switch across to the
Away Team and the screen will flash with the ‘A’
letter allowing you to select the Away Team
colour.
Press the MODE button and the Preset Colour
Choices will flash.
Press the SELECT or RESET buttons to scroll
through them until you find your choice.
Press the ADJUST button to lock in your choice
and return to the Match Day Score
Mode/Screen.
When you scroll through the Preset Colour Choices, you will also see the ‘USER’ option.
This smart feature allows you to personalise the letters for your own choice; maybe
program it for team names like MAN v LIV or countries like ENG v USA or even people’s
names like KEV v JAS if you’re using the feature for some friendly fun competition!
When ‘USER’ is flashing, press the START/STOP button and the first digit/letter will flash.
Press the SELECT or RESET buttons to scroll through until you find your letter of choice.
Press the MODE button to switch across to the next letter and repeat the process.
Press the ADJUST button to lock in your choice and return to the Match Day Score
Mode/Screen.
NEW User Set Time - YOU choose your own
match length. If your match length is 17mins 30
secs then you can now program ANY TIME
yourself! Scrolling through the Preset Timers,
you will see one that says USER. Select this
option and program your time! Press the SELECT
button to increase the minutes and the RESET
button to decrease the minutes. Press the MODE
button to switch across to the seconds and
repeat the process.

SCORING OF THE MATCHES/GAMES IN THE
REFSCORER MATCH DAY SCORE MODE/SCREEN
Count Continue Timer Mode –for the Referee who
wants their timer to continue counting to 90 mins
after half time!
Select your match time from the extensive choice of
Preset Timers, or program your own with the NEW
User Set Time Feature.
Whether you choose the conventional 45 minutes
timer, or 5 minutes, or even program it yourself to 17
minutes and 30 seconds, at the end of the half, the
timer will pause, and upon restart for the second half,
the timer will continue counting UP the same amount
of minutes chosen, so to 90, 10 and 35 using the
three examples listed above!
When all the pre match information that you need has been programmed into the RefScorer
Digital Watch, and the Team Kick Off Reminder has been set just before you
blow your whistle to start the match/game, you’re now in RefScorer Match Day Mode -
The Timer has started and the match/game is in play!
When a goal/point is scored, simply press the ADJUST button to add a goal/point for the
Home Team and press the SELECT button to add a goal/point for the Away Team.
If you make a mistake, you can correct this and delete/erase a goal/point by pressing the
MODE button for the Home Team and the RESET button for the Away Team.
At Half Time, the timer will pause and the score stays on the screen. A short gentle press of
the RESET button resets the timer ready for the second half, but a long press and hold of the
RESET button will erase the score and time and reset the screen. (do this after Full Time!)

INTERVAL TRAINING TIMER MODE/SCREEN
This Mode/Feature can be used by Fitness
Coaches and Personal Trainers for HIIT
training, sprints and counting reps on
squats, lifts, pull ups or push ups etc.
1,2,3,4,5 and 10 minute preset timer
options are programmed in, plus you
have the option to choose your own
User Set Time too.
Hold the SELECT button for 3 seconds and then the screen will flash. Scroll through the
Preset Timers by pressing the START/STOP button until you find your choice.
Press the ADJUST button to lock in your choice and return to the Interval Training
Mode/Screen.
User Set Time - YOU choose your own training time. Scroll through the Preset Timers and
you will see one that says USER. Select this option and program your time! Press the
SELECT button to increase the minutes and the RESET button to decrease the minutes.
Press the MODE button to switch across to the seconds and repeat the process.
Press the ADJUST button to lock in your choice and return to the Interval Training
Mode/Screen.
Count-Down or Count-Up Timer –Select your choice by simply pressing the RESET button.
Press the START/STOP button to START the timer and press the SELECT button to count
the reps done.
When the timer runs out, the watch will beep and/or vibrate, and a short press of the
RESET button will prepare the timer to start again, keeping the score/reps recorded on
the screen.
To clear the screen and start again, hold down the RESET button for a long press of
around 3 seconds and this will erase the score/reps recorded.

PEDOMETER MODE/SCREEN
Measure Your Steps, Distance and Calorie
Tracking!
Daily Activity Goal - count and record your
steps each day and have it stored in memory
for a week!
To START the Pedometer Mode/Feature,
press the START/STOP button ensuring that
the screen displays PDM RUN.
If the screen reads PDM STP then the watch
will not record any data.
Programming the watch for your own Weight, Height and Stride.
Ensure the screen reads PDM STP and then hold the ADJUST button for 3 seconds and the the
screen will flash.
First program your WEIGHT, measured in KG. Press the SELECT button to increase the weight and
the RESET button to decrease the weight. Press the START/STOP button to switch across past the
decimal point and repeat the process.
Press the MODE button to now program your HEIGHT, measured in CM.
Press the MODE button to now program your STRIDE, measured in CM.
To measure your Stride (or Step Length), we suggest that you take 10 steps, measure the distance
from start to finish, and divide by 10. The result is your Stride Length.
*To program HEIGHT and STRIDE, repeat the steps above detailed when describing how to program
your WEIGHT.
Press the MODE button one more time to now program your GOAL for Daily Steps.
Press the SELECT button to increase the steps in increments of 1000 and press the RESET button to
decrease the steps chosen.
Press the ADJUST button to lock in your programmed selections and return to the Pedometer
Mode/Screen. Then remember to START the Pedometer Mode/Feature, press the START/STOP
button ensuring that the screen displays PDM RUN.
*With the screen displaying PDM RUN, press and hold the ADJUST button for 1-2 seconds, and the
screen will now show you the Recorded Daily Data.
Press the SELECT button to scroll through the Steps, Distance and Calorie Records for ‘d1’ (day 1).
Press the RESET button to switch to ‘d2’ (day 2) and scroll through the Records again with the
SELECT button. Repeat these steps to view the information stored for each day.
Press the ADJUST button once more to return to the Pedometer Mode/Screen.

STOPWATCH TIMER MODE/SCREEN
TO DOWNLOAD A MORE COMPREHENSIVE USER INSTRUCTION
INFORMATION MANUAL, AND ALSO VIEW OUR EASY TO
FOLLOW DEMONSTRATION VIDEOS ON OUR
RefStuff YouTube CHANNEL. PLEASE GO TO OUR WEBSITE:
WE HOPE THAT YOU ENJOY USING THE
RefScorer Digital Watch v2.021
Measured in 1/100 Second.
Press the START/STOP button to start the
Stopwatch.
Press the START/STOP button to pause the
Stopwatch.
To clear the screen and start again, hold
down the RESET button for a long press of
around 3 seconds and this will erase the
stopwatch timer screen.

WE THANK YOU FOR YOUR SUPPORT USING OUR PRODUCTS.
PLEASE LEAVE US A REVIEW ON OUR WEBSITE
OR ON AMAZON IF YOU PURCHASED FROM THERE,
AND PLEASE CHECK OUT OUR OTHER PRODUCTS
AVAILABLE IN THE RefStuff RANGE.
#groundbreaking #gamechanging #gamechanger
www.RefScorer.com
RefStuff Products are Carefully Designed, By a Referee, For Referees,
Paying Fine Attention to Detail.
RefStuff - Your PERFECT PARTNER for Refereeing.
Technology That You Can Count On.