Reison 10-237 User manual

1
Head rest 10-237 including versions
Version
10-237
10-237-Mayf
10-237-T
C-C:
Ø:
Length:
106 mm
15 mm
120 mm
C-C:
Ø:
Length:
171,5 mm
18 mm
170 mm
Pole:
Length:
20x20mm
180 mm
Warning! This symbol indicates important information related to safety. Follow these
instructions carefully.
Read User Manual before use! It is important to fully understand the content of the user
manual before attempting to use the equipment.
2020-10-30
Document number: M10-237EN rev.01
Head rest 10-237
ENGLISH

2
Intended use
Head rest intended for support and positioning of patient head during e.g. ENT-surgery. The product
is to be used by medical professionals within a medical facility.
Safety regulation
Maximum load: 15 kg in even distribution, corresponding to a patient weight of 200 kg, according to
EN 60601-1 and EN 60601-2.
Before use, ensure correct function!
When loosening the lock lever to adjust the head rest, support underneath the head rest, to prevent
it from uncontrolled descend into the bottom position!
Remove the head rest or secure it over the operating table, during transport!
Service and preventive maintenance shall be performed by authorized personnel.
MAX 15 kg (MAX 200 kg )

3
User instruction
Installation
Position adjustment
A.
B.
B.
A.
A.

4
Maintenance
Service, preventive maintenance, adjustment and repair shall be performed by authorized personnel
only. Altering the construction without a written consent from the manufacturer, is strictly forbidden.
Adjusting the lock mechanism
Tool: 2 mm hex key.
Cleaning
Clean with antiseptic detergent with pH 6 –8 and warm water. Ethanol can be used on metal surfaces.
Wipe dry with soft cloth. Do not use strong acidic or alkaline detergent.
Control
Check that there are no loose parts and that there is no damage to any part. Check the lock function
in the joints of the head rest. Check that the cushion is clean and is not damaged.
Annual service
Once a year the arm board shall be carefully cleaned, moving parts shall be lubricated, the locking
function shall be tested and, if necessary, be adjusted.
A.
C.
B.

5
Spare parts
Version:
10-237
10-237-Mayf
10-237-T
Description
Pcs
Article no.
Article no.
Article no.
1.
Head rest holder
1
10934
11391
12008
2.
Pivot holder
2
10300
10300
10300
3.
Pivot link
1
10705
10705
10705
4.
Head plate holder
1
11853
11853
11853
5.
Head plate
1
11854
11854
11854
6.
Washer
4
10004
10004
10004
7.
Snap ring SGA 18 A2
1
-
-
-
8.
Screw MF6S M6x14 A2
4
-
-
-
9.
Screw MF6S M6x12 A2
4
-
-
-
10.
Velcro strap hook
2
11289
11289
11289
11.
Cushion
1
11886
11886
11886
12.
Adjustment nut
2
10301
10301
10301
13.
Locking screw
2
10303
10303
10303
14.
Set screw MSK6SS M5x8 A2
2
-
-
-
15.
Nut left threaded
2
10302
10302
10302
16.
Set screw MSK6SS M4x5 A2
2
-
-
-
17.
Lever
2
10304
10304
10304
18.
Ball
2
K20M6S
K20M6S
K20M6S

6
Technical specification
Maximum work load
15 kg in even distribution, corresponding to a patient weight of 200 kg,
according to EN 60601-1 and EN 60601-2
Material Head rest
Stainless steel
High pressure laminate
Version
UDI-DI
Weight
Dimension
(H x W x L)
10-237
07350111831288
4,2 kg
90-350 x 250 x 570
10-237-Mayf
07350111831295
4,2 kg
90-350 x 250 x 570
10-237-T
07350111831301
3,7 kg
90-350 x 250 x 570

7
Reison Medical AB
Eriksbergsvägen 32A
734 92 Hallstahammar
SWEDEN
[phone] [e-mail] [e-mail]