Relight Technology Shining Tree MS-W10 User manual

User Guide（English）Bonsai Bluetooth Speaker Lamp
with Wireless Charging Pad

IntroductionThank you for choosing our product! Tree of Light is a LED night lamp with multiple uses. You can control the brightness with simple touch or slide. At the base of the lamp, you can wirelessly charge your favourite devices. Also it can connect to your smartphone, tablet or computer to give you fantastic music experience through BT (BT function apply to specific model).With all these functions compiled in one single body, it becomes a must have for every household and office.Packaging Contents• Tree of Light x1• Charging Adaptor x1• User Guide x1SpecificationModel Name: Tree of LightWireless Charging: 5V, 1ABrightness: 200LumensOutput Voltage: 5VMax Output Current: 800mAConversion Rate: 70%~75%BT Chipset: Realtek RTL876ATV
BT Frequency: 2.4GHZBT Profile: A2DP, AVRCPPrecautionsPlease read all safety instructions and warnings thoroughly before using this product. Improper use of this product may result in damage to this or attached products.1. Do not disassemble the product or attempt to fix it.2. Kindly use an original charging cable provided.3. Do not attempt to replace any part of this product or battery inside.4. Do not crush, puncture, dispose of in fire, short the contacts or expose the product to water or other liquids.5. Do not store or use the product in a high-temperature environment, including intense sunlight or heat.6. Avoid drops, bumps, abrasions and impacts.7. If there is any reason to believe that there is damage to the product, discontinue use immediately.8. If you find that the product is too hot, is emitting an odour, or is deformed, punctured or exhibits any suspicious or abnormal behaviour, discontinue use immediately and contact our customer service.9. The product is not suitable using for Children.Working Conditons Indoor Use onlyTemperature: -40℃~40℃/ -40℉~104℉Humidity: 40%~60%
English
Thank you for choosing our product! Shining Tree is a LED night lamp with multiple uses.
Model Name: Shining Tree
• Shining Tree x1

Table of FeaturesAppearance & Interface Description
MS-W10
1. Charge-In Port2. LED Light3. Wireless Charging Pad4. LED Brightness Controller5. Wireless Charging Indicator LightBTc
S
Metallic
design
Fast
charging NFC
English

Operation Instructions
MS-W10
1. Plugging in AC Adapter2. Turning the LED Light On/Off• Light on automatically when plugging in.• Long Touch the LED Brightness Controller to turn on or off the light.• Short touch for switching three gears of brightness3. Wireless Charging• Place your QI Wireless Charging enabled smartphone over the Wireless Charging Pad.• The indicator light on pad will change into blue, and it will be off automatically in 10 secs4. Charging Position
English

Appearance & Interface Description
MS-W10
1. Play/Pause(long press for BT)2. LED Light3. Wireless Charging Pad(apply to B2)4. LED Brightness Controller5. Charge-In port6. Charging Indicator Light7. Volume－/Next Song8. Volume＋/Previous Song9. NFC（Special model only)10. Bluetooth Indicator9
10
English

Appearance & Interface Description
MS-W10
1. Plugging in AC Adapter2. Turning the LED Light On/Off• Light on automatically when plugging in.• Touch the LED Brightness Controller again to turn off the light.• Touch the LED Brightness Controller for 3 seconds to activate Auto-Sleep mode and light off within 30 mins.3. Brightness control• Slide your finger over the LED Brightness Controller to dim or brighten the LED light.4. Wireless Charging (apply for partial models)• Place your QI Wireless Charging enabled smartphone over the Wireless Charging Pad.• Then begin to charge.• The indicator light on pad will change from yellow into ice blue.5. Paring Tree of Light• Press “Power Button” until the Bluetooth indicator flashes with “Disconnected” notification sound or certain sound.• Turn on the BT function of your devices and scan “HomeTree” out.• Pair to “HomeTree” with “Connect” notification sound or certain sound.• To control the volume and playback via paired device or top pad of Tree of Light.• Quick click “＋” or “－” to control volume. Long press“＋” for next song and “－” for previous song. The blue indicator light will be off if Tree of Light not in use for a long time.
English

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This equipment
has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
ϋϋ Reorient or relocate the receiving antenna.
ϋϋ Increase the separation between the equipment and receiver.
ϋϋConnect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
ϋϋ Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.

FCC Statement
This device complies with Part 18 of the FCC Rules. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
● Increase the separation between the equipment and
any other radio device.
●Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
●This product may cause interference to radio equipment and should
not be installed near maritime safety communications equipment or
other critical navigation or communication equipment operating
between 0.45-30 MHz. Variations of this language are permitted
provided all the points of the statement are addressed and may be
presented in any legible font or text style.