Remo+ Doorcam User manual

DoorCam™

DoorCam™
Quick Start Guide

WHAT’S IN THE BOX
DoorCam
D Type Batteries
Battery Cover Screws
Bracket Fix Screws
Hex Wrench

MEET DOORCAM
BODYCAMERA
1
2
3
4
5
6
*Remove the scratch protection sticker before use
IR LED
PIR sensor
Camera lens
Speaker
ALS sensor
Mic
7
8
9
10
11
12
Battery cover screw
Body x screw
Bracket x hole
Status button
Status LED
Battery cover

HOW TO REGISTER DOORCAM
CREATE AN ACCOUNT
1. Make sure your mobile device is connected to your home Wi-Fi.
2. Download and launch the remo+ app.
3. Press sign up at the bottom of the login page.
4. Enter your email and create a password and prole name.
Then press sign up. For Help, press the at the top right corner.

1. Have your Wi-Fi network password available.
2. Insert the three D type batteries into the battery slots on the body.
3. DoorCam's status LED light should ash up and
down. If it is not, press the status button.
4. Go back to the app, and select your timezone.
5. Switch to your phone’s Wi-Fi settings, leaving your remo+ app open.
Please DO NOT CLOSE YOUR APP.
6. Connect to the network DoorCam_xxxxxx. If you
get the message “internet is unavailable”, tap “okay”.
7. Once you’re connected to the DoorCam_xxxxxx
network, switch back to the remo+ app and press
continue.
8. Select your home’s Wi-Fi network, enter the password, then press
continue. Your app will then complete the registration. This may take up to
3 minutes.
9. Secure the battery cover using a screwdriver.
REGISTER DOORCAM

HOW TO INSTALL DOORCAM
1. Use a hex wrench to loosen the body x
screws a little.
2. Adjust the gap of the bracket so that it is
close to the door.
3. Use a hex wrench to tighten the body x
screws again. If you want to x it tightly,
bracket x screws it in.

1. Remove the battery cover screw
using a screwdriver.
2. Remove the battery cover.
3. Replace batteries and secure the
battery cover using a screwdriver.
HOW TO REPLACE BATTERIES

FAQ
Forgot your password?
1. Press “forgot password” on the login page.
2. Enter your account email and click SEND.
3. Check your email (including spam folder) for the temporary password.
4. Open the remo+ app and log in using your account email and the
temporary password.
5. Create a new password.
How many users can access the DoorCam?
You can view the DoorCam from up to 5 iOS or Andriod devices:
1. Open the remo+ app from your choice of device.
2. Log in using the same account email and password.
3. Enter a dierent prole name (this will show in the Viewers list).
Is a Cloud plan required?
No, the Cloud plan is specically for saving videos. You will still be able to
receive instant alerts, see and communicate with your visitors, and access
your activity log without a Cloud plan.
When you purchase DoorCam, you have a complimentary 30-day trial of
the Cloud plan. To save videos after the 30-days, you can extend your
Cloud plan for $3 every 30 days or $30 per year on our website
(olivendove.com).

Can’t see the videos on your Recent Activity?
For Android users, allow all permissions to the
remo+ app:
Settings >Applications Manager >Permissions >
Storage
Check your Settings:
remo+ app >Menu >Devices >
Your Devices >Turn on Motion Sensor >
Turn on Save Videos to Cloud >
Press the DoorCam status button to save the settings
Can’t nd your home Wi-Fi during the setup process?
If you cannot get past step 7 on "Register DoorCam" on the QSG, make
sure you connect to your home Wi-Fi and retry the setup process by
logging into your account and pressing add device.
Save Videos to Cloud
Motion Sensor
TROUBLESHOOTING
remo+

Support:
We’re happy to help!
[email protected]
(888)-985-1849
Mon-Fri 8am to 5pm PT (except holidays)
LIMITED WARRANTY
Follow us on:
1. LISCENSOR DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE LICENSED PRODUCT AND
HARDWARE WILL MEET LICENSEE’S REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE AND
HARDWARE WILL BE UNINTERRUPTED OR ERROR-FREE. LICESNOR DOES WARRANT THAT THE MEDIA ON
WHICH THE SOFTWARE IS FURNISHED AND THE HARDWARE WILL BE FREE FROM DEFECTS IN MATERIALS
AND WORKMANSHIP UNDER NORMAL USE FOR A PERIOD OF ONE YEAR FROM THE DATE OF DELIVERY
(”WARRANTY PERIOD”). THIS LIMITED WARRANT IS VOID OF FAILURE OF THE MEDIA ON WHICH THE
PRODUCT OR SOFTWARE IS FURNISHED HAS RESULTED FROM ACCIDENT, ABUSE, OR MISAPPLICATIONS.
2. EXCEPT AS PROVIDED ABOVE, THE LICENSED PRODUCT IS PROVIDED “AS IS” WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE LICENSED PRODUCT AND HARDWARE IS WITH LICENSE.

Smart. Intuitive. Caring.