Cockpit CKNOPOU User manual

USER MANUAL EN.
Cockpit Outdoor Camera
Add/Remove and Wi-Fi Configuration
Before starting adding your module, please complete set up procedure
for your COCKPIT gateway.
For more information about COCKPIT gateway set up procedure, please
refer to the COCKPIT gateway User Manual.
Type: Outdoor Camera Date: 08.05.2019
Ordering code: CKNOPOU Document: COCKPIT_Camera_Outdoor_COCKPIT_Outdoor_Camera_Add.Rem_v1_eng 1

Adding Camera
5
2
Due to security reasons, WiFi configuration for Outdoor
Camera can not be done from Cockpit mobile client
(Android/iOS) application.
In order to configure this type of camera, please perform
following steps:
1. Connect the camera to network router via Ethernet
cable and power up the camera.
2. Connect your PC and mobile
device with Cockpit client
application to the same
network.
3. Click “Home Setup” tab located
in the bottom of
Cockpit@Home app.
4. Click „Manage devices”.
5. Click gear button on the top of
the screen.
3
4

10
3
6. Select “Find devices” option.
7. COCKPIT gateway will start
“Add new devices mode”.
5
8. After adding process
complete, the list of devices
appears with Outdoor
Camera present on it.
9. Click on “settings” icon
located next to the Outdoor
Camera module name.
9
10. Select “Edit” option.

4
12
11. Name the device (e.g. Outdoor
IP Camera) and select room
(e.g. Home) for the Outdoor
Camera module. When you are
done, click “DONE” button.
13. To locate newly added
device, click “Devices” tab on
the bottom of the screen.
14. If device is not shown on the
list, choose the proper room
by pressing „Device by
location” button.
13
14
11
12. You will be directed back to the
screen where you can see all
added devices. Adding
procedure for Outdoor Camera
module is now completed.
Press arrow button and you
will be directed to “Home
Setup” screen.

4. Scroll down to the
“Authorization” section.
5. Please note down:
- User name
- Password
- IP address
This will be needed in the
next steps.
6. Press arrow button to
close „Device details”.
WIFI Configuration
1
2
4
5
6
5
1. Click on “settings” icon
located next to the Outdoor
Camera module name.
2. Press “Device details”
option.

7. Next step is to login to IP camera
web page. Open web browser on
your PC or mobile device and enter
the IP address of a Outdoor Camera
(please refer to item 5 of this
chapter) and port 6611, for example
http://192.168.1.148:6611
8. You will be asked to login. Please
enter Username (admin by default)
and Password (please refer to item
5 of this chapter) and click „Sign in”
button.
6
7
8

9. Select the type of device/ browser
you use for Outdoor Camera setup
procedure (in this example the
Google Chrome web browser was
used).
7
9

10. After logging in and choosing the
device/browser, you should see the
following screen. Select „Options”
icon.
8
10

11. From side menu of the Outdoor
Camera web interface choose
“Networking” section and select
“Wireless Settings” option.
12. Press the “Search” button to search
available WiFi networks.
13. Choose your WiFi network from the
list of available networks.
9
11
12
13

14. After selecting your WiFi network,
fill in password fields “Key” and
“Confirmation key” and press “OK”.
15. When this is done, disconnect
Ethernet cable from your Outdoor
Camera. Cockpit client application
will automatically detect that
Outdoor Camera changed from
Ethernet connection to WiFi
connection and you will be able to
use it without additional
configuration.
10
14
15