Renderi Rainier WSD-H-2042 User manual

American Made
Rainier Study Desk with Hutch
Assembly Instructions
Model: WSD-H-2042

American Made
Model: WSD-H-2042 2
Rainier Study Desk with Hutch
1 Year Limited Warranty
Renderi is committed to providing high quality
furniture products, and with that in mind we
oer a limited 1-year warranty.
• This warranty covers “defects” on furniture
parts and workmanship for a period of 1 year
from the purchase date.
• Defects are defined as any imperfections that
may impair the intended use of the product.
• This warranty is strictly limited to the repair
or replacement of defective component
parts, and excludes all other direct or
indirect charges and expenses up to the limit
permitted by law in your state/province.
This warranty does not apply to:
• Normal wear and tear, which is to be expected
over the course of ownership.
• Products not installed, used, or maintained
in accordance with product instructions and
warnings, or damaged during assembly.
• Product defects resulting from intentional
damage, negligence, abuse, product
modification, accidents, or exposure to the
elements.
• Products used for rental purposes.
• Products used for commercial purposes.

American Made
Model: WSD-H-2042 3
Rainier Study Desk with Hutch
Assembly
Hardware
Large Cam
Lock x33
Large Cam Pin
x29
Furniture Glide
x4
Small Cam Pin
x4
Fast Cap
x33
2 People 45 Minutes Tools required
Desk Parts

American Made
Model: WSD-H-2042 4
1 Insert Cam Locks into all large holes.
2 Use screwdriver to screw Large Cam Pins (x29) into all small holes, except for the 4 holes on the Hutch Center Divider.

Screw in the Small Cam Pins (x4) into the holes on the
Hutch Center Divider.

Make sure arrow on the Cam Lock is
facing outer edge of the board.

American Made
Model: WSD-H-2042 5
4
Attach Left Desk End and Right Desk End to the
Desk Modesty. (Use screwdriver to turn Cam
Locks clock-wise.)

Use a screwdriver to turn
Cam Lock until it’s snug; being
careful not to over-tighten.
3 Using a hammer, tap in the Furniture Glides (x4) - 2 each into the bottom edge of the Desk Left End and Desk Right End; then set parts aside.

American Made
Model: WSD-H-2042 6
5 With a person on each end, carefully stand desk up on its feet. Attach the Desk Top and tighten Cam Locks.
6 Attach Hutch Shelves to the Hutch Center Divider and tighten Cam Locks.
7 Attach Hutch Center Divider and Hutch Shelves to Hutch Modesty and tighten
Cam Locks.

American Made
Model: WSD-H-2042 7
8
Attach Hutch Left and Right Ends to
Hutch Modesty and Hutch Shelves
and tight Cam Locks.
9 Attach Hutch to Desk Top and tighten Cam Locks. Ensure all Cam Locks are snug; then cover exposed
Cam Locks with Fast Caps.