Living Spaces Judith Day Bed User manual

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Hardware included in rail’s carton to attach storage and support system.
1 2
Step#1
Align backrest carefully with Arms and push down firmly to assemble.
Step#2
Attach center support rails (O1) to Arm using Wrench(I), Bolt (B) and Washer (E)(factory
installed).
Attach side support rails (O) to Arm using Wrench(I), Bolt (B) and Washer (E)(factory
installed).
Attach bracket (U) to connect Arm and Back using Wrench(I), Bolt (B) and Washer (E).
I O O1 P P1 Q S S1 U
Φ8 MM Center support rail Side support rail Slats Storage
support rails
End clip Bracket
1PC 1PC 1PC 13PCS 4PCS 26PCS 3PCS 2PCS 2PCS
Judith Day Bed Assembly Instructions
*Bolt B and Washer E
are factory installed*
*Bolt B and Washer E
are factory installed*

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Hardware included in rail’s carton to attach storage and support system.
3 4
Step#3
Verify Euro Slats System Tension Slats are installed curved upwards per diagram.
Step#4
Attach side frame to back frame and front board using Wrench(I), Bolt (B1) and Washer (E).
Judith Da
y
Bed Assembl
y
Instructions
I O O1 P P1 Q S S1 U
Φ8 MM Center support rail Side support rail Slats Storage
support rails
End clip Bracket
1PC 1PC 1PC 13PCS 4PCS 26PCS 3PCS 2PCS 2PCS
*Bolt B1 and Washer E
are factory installed*

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Hardware included in rail’s carton to attach storage and support system.
5 6
Step#5
Attach wooden support rails to full length wooden side support cleats(flat side facing up).
Verify the wooden support rails are installed properly into support cleats .
Step#6
Put the storage board (S,S1) on wooden support rails per diagram.
Step#7
Move/place bed into final position in bedroom.
Judith Da
y
bed Assembl
y
Instructions
I O O1 P P1 Q S S1 U
Φ8 MM Center support rail Side support rail Slats Storage
support rails
End clip Bracket
1PC 1PC 1PC 13PCS 4PCS 26PCS 3PCS 2PCS 2PCS

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Step#8
Insert/Roll the Storage under the bed.
Judith Da
y
bed Assembl
y
Instructions