Renderi Rainier WSD-BCUB-2042 User manual

American Made
Rainier Single Drawer Study Desk
Assembly Instructions
Model: WSD-BCUB-2042

American Made
Model: WSD-BCUB-2042 2
Rainier Single Drawer Study Desk
1 Year Limited Warranty
Renderi is committed to providing high quality
furniture products, and with that in mind we
oer a limited 1-year warranty.
• This warranty covers “defects” on furniture
parts and workmanship for a period of 1 year
from the purchase date.
• Defects are defined as any imperfections that
may impair the intended use of the product.
• This warranty is strictly limited to the repair
or replacement of defective component
parts, and excludes all other direct or
indirect charges and expenses up to the limit
permitted by law in your state/province.
This warranty does not apply to:
• Normal wear and tear, which is to be expected
over the course of ownership.
• Products not installed, used, or maintained
in accordance with product instructions and
warnings, or damaged during assembly.
• Product defects resulting from intentional
damage, negligence, abuse, product
modification, accidents, or exposure to the
elements.
• Products used for rental purposes.
• Products used for commercial purposes.

American Made
Model: WSD-BCUB-2042 3
Rainier Single Drawer Study Desk
Assembly
Hardware
Large Cam
Lock x27
Drawer Pull
x1
Drawer Slide Set x1
(4 pieces total)
Small Cam
Lock
x8
Large Cam Pin
x27
Small Cam Pin
x8
Drawer Pull Screw
x2
Furniture Glide
x4
Fast Cap
x35
2 People 60 Minutes Tools required
Slide Screw
x14

American Made
Model: WSD-BCUB-2042 4
Rainier Single Drawer Study Desk
Desk Parts
Drawer Parts

American Made
Model: WSD-BCUB-2042 5
1Insert Large Cam Locks into the large holes on the Desk Left End, Center Divider and Desk Right End
2Use screwdriver to screw large Cam Pins into small holes on Desk Left End, Center
Divider and Desk Right End.
As shown above, Leave the 3 small holes
on the Center Divider and Desk Right End
empty as shown for the drawer slides.
Make sure arrow on the Cam Lock is
facing outer edge of the board.

American Made
Model: WSD-BCUB-2042 6
3Using a hammer, tap in the Furniture Glides (x4)—2 each into the bottom edge of the Desk Left End and Desk Right End.
4
Using a screwdriver, screw Left Cabinet Slide (CL) to the Center Divider
with Slide Screws (x3). Screw Right Cabinet Slide (CR) to the Desk Right
End with Slide Screws (x3).

American Made
Model: WSD-BCUB-2042 7
5
Insert Large Cam Locks into
large holes on the Deck and
Fixed Shelf. Then attach Deck
and Fixed Shelf to the Center
Divider. (Use screwdriver to turn
Cam Locks clock-wise.)
Use a screwdriver to turn
Cam Lock until it’s snug; being
careful not to over-tighten.
6Insert Large Cam Locks into the large holes and screw in the Large Cam Pins into the
small holes on the Desk Modesty. Attach the
Center Divider, Deck and Fixed Shelf to the
Desk Modesty.
7Attach Desk Left End to the Desk Modesty. Then
attach Desk Right End to
the Desk Modesty, Fixed
Shelf and Deck.

American Made
Model: WSD-BCUB-2042 8
8 With a person on each end, carefully stand the desk upright.
Screw in the Large Cam Pins
to the holes on the Desk Top.
Attach the Desk Top.
9
Insert small Cam Locks into
large holes on Drawer Left
End, Drawer Right End and
Drawer Back.
Use a screwdriver to attach
Drawer Guides (DL and
DR) to Drawer Left End and
Drawer Right End using Slide
Screws (x4) on each side.
10 Flip Drawer Left and Right Ends over. Screw in Small Cam
Pins into Drawer Left and Right
Ends and Drawer Front.

American Made
Model: WSD-BCUB-2042 9
11 Attach Drawer Left and Right Ends to Drawer Back and tighten Cam Locks.
12 Slide Drawer Bottom into slot.
13 Attach Drawer Front making sure Drawer Bottom is in slot before
tightening Cam Locks.
Use screwdriver to attach Drawer Pull
with Drawer Pull Screws.
14 Tilt drawer up and insert rollers into
cabinet slides.
Ensure all Cam Locks
are snug and cover
exposed with Fast Caps.