RHINO SR15M User manual

SR10M/SR15M
Published 02-12-03 Part No. 00759799C
FLEX-WING MECHANICAL LEVEL
LIFT ROTARY CUTTER/SHREDDER
OPERATOR'S MANUAL
This Operator's Manual is an integral part of the safe operation
of this machine and must be maintained with the unit at all times.
READ, UNDERSTAND, and FOLLOW the Safety and Operation
Instructions contained in this manual before operating the
equipment.
© 2004Alamo Group Inc.
RHINO®
1020 S. SangamonAve.
Gibson City, IL60936
800-446-5158
Email: [email protected] $0.00

TO THE OWNER/OPERATOR/DEALER
All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded
operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has
designed this implement to be used with all its safety equipment properly attached to minimize the chance of
accidents.
BEFORE YOU START!! Read the safety messages on the implement and shown in your manual.
Observe the rules of safety and common sense!
WARRANTY INFORMATION:
ReadandunderstandthecompleteWarrantyStatementfoundinthisManual. FillouttheWarrantyRegistrationForm
infulland return it within 30 Days. Makecertainthe Serial Number of the Machineisrecorded on the Warranty Card
andontheWarrantyFormthatyouretain.Theuseof"will-fit"partswillvoidyourwarrantyandcancausecatastrophic
failure with possible injury or death.

In order to reduce accidents and enhance the safe operation of mowers, Alamo Group Ag Division,in
cooperationwith other industry manufacturershasdevelopedtheAEM/FEMAIndustrialandAgricultural
MowerSafety Practices videoand guide book.
Thevideo willfamiliarizeandinstructmower-tractoroperatorsin safepracticeswhenusing industrialand
agriculturalmowingequipment. ItisimportantthatEveryMowerOperatorbeeducatedintheoperationof
theirmowing equipment and be able to recognize the potential hazards that can occurwhile operatinga
mower. Thisvideo,alongwiththemoweroperator’smanualandthewarningmessagesonthemower,will
significantlyassistinthisimportanteducation.
YourAuthorizedAlamoAgDealermayhaveshownthisvideoandpresentedyouaDVDVideowhenyou
purchasedyour mower. Ifyouor anymower operator havenot seen thisvideo,Watchthe Video,Read
thisOperator’sManual, andCompletetheVideoGuidebookbeforeoperatingyournewmower.If you
do not understand any of the instructions included in the video or operator’s manual or if you have any
questionsconcerning safety ofoperation, contact yoursupervisor,dealer or Alamo GroupAg.
IfyouwouldlikeaVHSvideotapeofthevideo,please emailAEMV[email protected]orFaxAEM
VHSVideoat [phone] or mail in a completed copy of theform on the back of this page toAEM
VHSVideo 1502 EWalnutStreet,Seguin,TX78155.and request theVHS videoversion. Pleaseinclude
yourname, mailing address,mowermodelandserialnumber.
Everyoperatorshouldbetrainedforeachpieceofequipment(TractorandMower),understandtheintended
use,andthepotentialhazardsbeforeoperatingthe equipment.
Safety Training
MakestheDifference


BE SAFE!


BEALERT!
 
 
 BE ALIVE!


BE TRAINED
beforeoperating
theMower!

Alamo Group Ag. Division is willing to provide
one (1) AEM Mower Safety Practices Video
Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety Video
DVD Format – AEM/FEMA Mower Operator Safety Video
Mower Operator’s Manual
AEM Mower Operator’s Safety Manual
RequesterName: Phone:
RequesterAddress:
City
State
Zip Code
MowerModel: Serial Number:
Date Purchased: DealerSalesperson:
DealershipName: Dealership Location:
Mailto: AEM Video Services
1502 E Walnut street
Seguin, TX 78155
Or Fax to: [phone]
OrEmail to: AEMV[email protected]

TABLE OF CONTENTS
SAFETY SECTION ................................................................................................................................1-1
Safety Information .....................................................................................................................1-2
DecalLocation ...........................................................................................................................1-13
FederalLaws &Regulations ....................................................................................................... 1-18
INTRODUCTION SECTION ................................................................................................................... 2-1
ASSEMBLY SECTION ..........................................................................................................................3-1
Blade Carrier Attachment ..........................................................................................................3-2
Tongue Attachment ................................................................................................................... 3-3
Center Axle Attachment............................................................................................................. 3-3
Level Rod Attachment ............................................................................................................... 3-4
Wing Section Attachment .......................................................................................................... 3-5
Wing Axle Attachment ...............................................................................................................3-5
Axle Adjustment Rod Attachment ..............................................................................................3-6
Wheel Attachment .....................................................................................................................3-6
Spring Assembly Attachment.....................................................................................................3-8
Center Axle Cylinder Attachment...............................................................................................3-8
Wing Section Cylinder Attachment ............................................................................................3-9
Hose Bracket Attachment .......................................................................................................... 3-10
Deflector Attachment .................................................................................................................3-10
Driveline Attachment .................................................................................................................3-11
EqualAngleJackshaft................................................................................................................3-12
Winch Assembly........................................................................................................................ 3-13
Three Spool Control Valve Installation.......................................................................................3-13
OPERATION SECTION ......................................................................................................................... 4-1
Servis Rhino®is a registered trademark of Alamo Group Inc.
MAINTENANCE SECTION ....................................................................................................................5-1
Lubrication Information .............................................................................................................. 5-2
Tongue ......................................................................................................................................5-3
Center & Wing Gearbox.............................................................................................................5-3
Divider Gearbox.........................................................................................................................5-4
Drivelines....................................................................................................................................5-4
ProtectiveShields ......................................................................................................................5-5
Blades .......................................................................................................................................5-7
Slip Clutches..............................................................................................................................5-9
HydraulicHoses.........................................................................................................................5-10
Skid Shoes ................................................................................................................................5-10
TorqueChart ..............................................................................................................................5-11
Disassembly & Assembly of Gearbox ........................................................................................5-12

SAFETY
SECTION
Safety Section 1-1

Safety Section 1-2
SR15 10-01
SAFETY
© 2004 Alamo Group Inc.
SAFETY
A safe and careful operator is the best operator. Safety is of primary importance to the
manufacturer and should be to the owner/operator. Most accidents can be avoided by being
aware of your equipment, your surroundings, and observing certain precautions. The first
section of this manual includes a list of Safety Messages that, if followed, will help protect the
operator and bystanders from injury or death. Read and understand these Safety Messages
before assembling, operating or servicing this mower. This equipment should only be oper-
ated by those persons who have read the Manual, who are responsible and trained, and who
know how to do so safely and responsibly.
TheSafety Alert Symbol combined with aSignalWord, as seen below, is usedthroughout this
manual and on decals which are attached to the equipment. The Safety Alert Symbol means:
“ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!” The Symbol and Signal
Word are intended to warn the owner/operator of impending hazards and the degree of
possible injury faced when operating this equipment..
CAUTION! The lowest level of Safety Message; warns of possible injury. Decals
located on the Equipment with this Signal Word are Black and Yellow.
WARNING! Serious injury or possible death! Decals are Black and Orange.
DANGER! Imminent death/critical injury. Decals are Red and White. (SG-1)
Practice all usual and customary safe working precautions and
above all---remember safety is up to YOU. Only YOU can prevent
serious injury or death from unsafe practices.

Safety Section 1-3
SR15 10/01
SAFETY
© 2004 Alamo Group Inc.
SAFETY
WARNING! Always maintain the safety decals in good readable condition. If the
decalsaremissing,damaged,orunreadable,obtainandinstallreplace-
ment decals immediately. (SG-5)
READ, UNDERSTAND, and FOLLOW the following Safety
Messages. Serious injury or death may occur unless care is
taken to follow the warnings and instructions stated in the Safety
Messages. Always use good common sense to avoid hazards.
(SG-2)
Si no lee Ingles, pida ayuda a alguien que si lo lea
para que le traduzca las medidas de seguridad. (SG-3)
PELIGRO! ¡LEA EL
INSTRUCTIVO!
DANGER! Never operate the Tractor or Implement until you have read and
completelyunderstandthis Manual, the Tractor Operator’s Manual,
and each of the Safety Messages found in the Manual or on the
Tractor and Implement. Learn how to stop the tractor engine
suddenlyin an emergency. Never allow inexperiencedor untrained
personneltoooperatetheTractorandImplementwithoutsupervision.
Make sure the operator has fully read and understood the manuals
prior to operation. (SG-4)
WARNING! Make certain that the “Slow Moving Vehicle” (SMV) sign is installed in
such a way as to be clearly visible and legible. When transporting the
Equipment use the Tractor flashing warning lights and follow all local
traffic regulations. (SG-6)
WARNING! OperatethisEquipmentonlywithaTractorequippedwithanapproved
roll-over-protectivesystem(ROPS). Alwayswearseatbelts. Serious
injuryorevendeathcouldresultfromfallingoffthetractor--particularly
during a turnover when the operator could be pinned under the
ROPS. (SG-7)
WARNING! DonotmodifyoralterthisImplement. DonotpermitanyonetomodifyoralterthisImplement,
any of its components or any Implement function. (SG-8)
DANGER! BEFORE leaving the tractor seat, always engage the brake and/or set
the tractor transmission in parking gear, disengage the PTO, stop the
engine,remove the key, andwait for all movingparts to stop. Place the
tractor shift lever into a low range or parking gear to prevent the tractor
fromrolling. NeverdismountaTractorthatismovingorwhiletheengine
is running. Operate the Tractor controls from the tractor seat only.
(SG-9)

Safety Section 1-4
SR15 10-01
SAFETY
© 2004 Alamo Group Inc.
SAFETY
DANGER! Do not operate this Equipment with hydraulic oil leaking. Oil is
expensiveanditspresencecouldpresentahazard. Donotcheckfor
leaks with your hand! Use a piece of heavy paper or cardboard.
High-pressureoilstreamsfrombreaksinthelinecouldpenetratethe
skin and cause tissue damage including gangrene. If oil does
penetrate the skin, have the injury treated immediately by a physi-
cian knowledgeable and skilled in this procedure. (SG-15)
DANGER! NeverallowchildrenorotherpersonstorideontheTractororImplement.
Falling off can result in serious injury or death. (SG-10)
DANGER! Never allow children to operate or ride on the Tractor or Implement.
(SGM-11)
WARNING! Do not mount the Tractor while the tractor is moving. Mount the
Tractor only when the Tractor and all moving parts are completely
stopped. (SG-12)
DANGER! Start tractor only when properly seated in the Tractor seat. Starting a
tractor in gear can result in injury or death. Read the Tractor operators
manual for proper starting instructions. (SG-13)
DANGER! Never work under the Implement, the framework, or any lifted
component unless the Implement is securely supported or blocked
up to prevent sudden or inadvertent falling which could cause
serious injury or even death. (SG-14)