RichardSolo CK002 User manual

*Connectors are labeled and compatible as follows:
Thank you for purchasing the RichardSolo 18000 mAh Multi-Function Jump Starter. Please read these instructions before
operation and save for future reference.
18000 mAh Multi-Function Jump Starter
INSTRUCTION MANUAL
Dual voltage (100-240V) AC wall adapter
with round-pin cable
DC car adapter w/round-pin cable
Multi-device USB charge cable (Apple 30-pin; Apple
8-pin Lightning; micro-USB connectors)
Round-pin charge cable
8 interchangeable notebook connectors*
18000 mAh Multi-Function Jump Starter battery
Intelligent jump start cable with LED-safety module
Instructions
Jump start socket — connects with jump start cable
for starting 12V vehicles
USB output port: 1A — charge smartphones, music
players via USB cable
USB output port: 2.1A — charge tablets, smartphones,
music players via USB cable
Input port: 15V-1A — plug in AC wall or DC car adapter
for recharging Multi-Function battery
LED flashlight — with strobe / SOS functions
Output port: 19V-3.5A — charges/powers 19V
notebook computers using included connectors
Output port: 12V-10A — powers 12V vehicle products
or 12V electronics
Power button
4 LED charge capacity indicators
(25% - 50% - 75% - 100%)
1
1
5
2
6
3
7
4
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
A 6.0 x 4.5mm Sony, Samsung, Fujitsu
Item Connector Size Compatible Notebook Brands
D 5.5 x 2.1mm HP, Compaq, Acer, Toshiba, IBM, NEC, Benq
C 5.5 x 2.5mm Toshiba, Acer, HP, Compaq, IBM, Dell, Asus, Fujitsu, Delta, MSI, LITEON
E 5.5 x 1.7mm Acer, Sony
F 4.8 x 1.7mm Asus, HP, Compaq, NEC, Delta
H 5.0 x 1.0mm Samsung
I 7.4 x 0.4mm HP, Dell
K 7.9 x 0.9mm IBM, Lenovo
Parts Layout
Battery Layout
1
7
9 8
6
2 3 4 5

Charge smartphones, tablets, etc:
Plug Multi-device USB charge cable to USB 5V-2.1A port on
battery (3)
Choose appropriate connector and plug into your device
Press/release Multi-Function battery power button (8)
Monitor charge via charge icon or LED on device
When charge is complete, Multi-Function battery continues to
safely trickle charge devices
Remove charge cable — battery LEDs shut off in about 35 seconds
Note: Use 2.1A port for larger devices like tablets + smartphones, music players,
small tablets, etc. Use 1A port for smaller devices like smartphones, music
players & small tablets. Use included Multi-device USB charge cable or USB
cable included with your own device. Multi-device USB charge cable can charge
more than one device at a time via one USB port using either the Apple 30-pin,
8-pin, or micro-USB connectors. Charge times may take longer in this mode.
Notes for jump starting 12V vehicle batteries:
• For best performance when starting vehicles, use Multi-Function Jump Starter
at 75% charge capacity (3 LEDs) or higher.
• DO NOT connect jump start cable clamps to wrong +/- battery terminals —
RED = (+) positive / BLACK = (-) negative
• DO NOT connect jump starter RED/BLACK cable clamps together
• Make sure Multi-Function Jump Starter cable clamps are connected securely
to battery terminals
• Always remove clamps within 30 seconds after motor starts
• Check battery terminals for rust, dirt and corrosion before using Multi-Func-
tion Jump Starter — clean if necessary to avoid poor performance
• DO NOT jump start again after 3 attempts to avoid damaging Smart Jump
Starter / Check for other vehicle issues
1
2
3
4
5
6
Check remaining Multi-Function
battery capacity
Tap/release power button (8)
Battery LEDs illuminate showing remaining charge capacity
in 25% increments
LEDs shut off in about 35 seconds.
Charge Multi-Function Jump Starter:
Connect Dual voltage AC wall adapter to AC wall outlet, or
Connect DC car adapter to cigarette lighter port in vehicle
Connect round-pin cable to Multi-Function Jump Starter input port (4).
Four LEDs (9) flash in 25% increments and remain solid when corresponding
capacity is reached.
When fully charged, all 4 solid LEDs shut off - Remove charge cable.
Note: For optimum performance, make sure all LEDs have stopped flashing and remain solid
to ensure full charge capacity. Total recharge time (0% - 100%) = about 6 hours.
3
5
4
1
21
2
3
18000 mAh Multi-Function Jump Starter
INSTRUCTION MANUAL
page 2
Connect intelligent jump start cables to jump
start socket (1) on Multi-Function Battery
Blue connector plug must be secure and fully
seated within the socket
Be sure red/green LED indicators on jump start
cable module are OFF
Connect RED cable clamp to positive (+)
battery terminal on vehicle
Connect BLACK cable clamp to negative (-)
battery terminal on vehicle
When connected, check LED indicators on
module and proceed as follows:
Green LED ON - connection is correct /
circuit is working - OK to start vehicle
Green LED flashes with buzzing
- vehicle battery is low - press/hold
BOOST button on module until green LED
illuminates - release button - start vehicle
within 30 seconds
Red LED ON with buzzing – connection
error – remove clamps and replace as
mentioned in steps 4 & 5 – when green
LED is on, OK to start vehicle
No LEDs illuminating/No buzzing
– vehicle battery may be damaged –
confirm jump start clamps are connected
correctly - press/hold BOOST button on
module until green LED illuminates -
release button - start vehicle within 30
seconds
When motor starts, remove clamps immediately
from battery terminals - leave motor running
Jump start instructions:
16
A
B
C
2
3
4
5
D
7
Tandem charging:
Connect AC or DC car adapter to
Multi-Function battery charge port (4).
Connect electronic device(s) to either
USB port (2)(3) on Multi-Function battery.
Press/release Multi-Function battery
power button.
Device(s) begin recharging — when fully
charged, Multi-Function battery recharges.
Charge or power 19V notebook computers:
Plug round-pin charge cable to 19V-3.5A output port on Multi-Function battery (6).
Select notebook connector, connect to round-pin charge cable and plug into computer port.
Press/release Multi-Function battery power button (8).
Monitor charge/power via icon or LED on computer.
When finished, remove charge cable — battery LEDs shut off in about 35 seconds
Note: 8 interchangeable notebook connectors are included. See chart for computer compatibility. Some notebooks,
like Apple, use proprietary connectors and are not compatible. Connector sizes under same brand or same series may
also vary. Check your own connector size for compatibility.
3
3
4
5
4
1 1
2
2

Specifications:
Power 12V vehicle products
or 12V electronics:
Plug round-pin charge cable to 12V-10A
output port on Multi-Function battery (6).
Connect round-pin charge cable to 12V
vehicle product or 12V electronics port.
Press/release Multi-Function battery
power button (8).
When finished, remove charge cable
— battery LEDs shut off in about 35
seconds.
3-Function LED
flashlight -Strobe -
SOS:
Press/hold power button (8)
2 seconds – LED flashlight
illuminates.
Tap/release power button
(8) — LED strobe flashes.
Tap/release power button
(8) — LED SOS flashes.
Tap/release power button
(8) — LED flashlight shuts off.
Package Contents:
• 18000 mAh mult-function Lithium-ion battery w/
built-in LED flashlight
• Dual voltage (100-240V) AC wall charger with
round-pin cable
• DC car charger with round-pin cable
• USB charge cable with Apple 30-pin/Apple 8-pin
Lightning/micro-USB connectors
• Round-pin charge cable
• 8 interchangeable notebook connectors
• Intelligent jump start cables with built-in LED safety
module.
• Durable zip storage case
• Instructions
3
3
4
4
1
1
2
2
Capacity: 18000 mAh (66.6 Wh)
Input: DC 15V 1A
Output: USB 5V-1A / USB 5V-2.1A / 12V-10A port /
19V-3.5A port / 12V jump start port
Start current: 300A
Peak current: 600A
Battery dimensions: 8.82" x 3.42" x 1.15"
(22.4 x 8.7 x 2.9 cm)
Case dimensions: 9.75" x 10.25" x 2.0"
(24.77 x 26.0 x 5.1 cm)
Battery weight: 1.35 lb (610 g)
Case weight w/accessories: 2.94 lb (1.34 kg)
Operating temperature: -4~140 degrees F (-20~60C)
Car adapter charge cable length: 37" (94.0 cm)
Dual voltage AC wall adapter charge cable length: 52"
(132.1 c m)
USB Apple/micro-USB charge cable length:
8" (20.32 cm)
Round-pin charge cable length: 8" (20.32 cm)
Jump start cable length: 12" (30.5 cm)
Battery charging time: about 6 hours
18000 mAh Multi-Function Jump Starter
INSTRUCTION MANUAL
page 3
FAQ
Q: How to shut off Multi-Function Jump Starter?
A: Multi-Function battery shuts off automatically when no load is detected or
when it has recharged. When charging devices, remove charge cable from
device or Multi-Function battery to shut off battery.
Q: How long does it take to recharge Multi-Function Jump Starter?
A: About 6 hours through its 15V-1A charge input port (4).
Q: How many times can Multi-Function Jump Starter charge my
smartphone?
A: Total number varies depending upon smartphone battery capacity. For
example, a fully charged Multi-Function battery can charge iPhone 6
about 7-8 times before it needs charging.
Q: How long does it take to recharge a notebook computer from a fully
charged battery?
A: About 4-6 hours.
Q: How many times will Multi-Function battery jump start my car before
it needs charging?
A: Up to 40 times depending upon battery and starting conditions. For best
performance, jump start vehicles when Multi-Function battery reads 75%
charge capacity (3 solid LEDs) or higher.
Q: What is the lifetime for Multi-Function Jump Starter?
A: Up to 5 years.
Q: How often should Multi-Function Jump Starter be recharged?
A: A fully charged unit will hold its charge for 6-12 months. Recharge every 3
months in storage.
Note: It’s a good idea to top up the charge as often as you want — keeping it
fully charged is fine. No need to wait till depleted.
Troubleshooting
Problem: No response when Multi-Function power button
is pressed
Cause: Battery is low on power / low voltage protection
mode activated
Solution: Plug AC or Car charger into 15V 1A port (4) and
recharge the battery
Problem: Multi-Function Jump Starter feels
hot when charging a notebook computer
Cause: Charging current is high (3.5A)
Solution: Remove notebook battery and use
Multi-Function battery to supply power directly
or disconnect Multi-Finction battery and
reconnect when devices are cool.
Toxic and harmful
substances
Pb:0 Hg:0 Cd:0 Cr(Vi):0
PBB:0 PBDE:0
Note: 0 indicates all homogeneous
materials’ hazardous substances
content are below the MVC limit
specified in the Standard 2002/95/
EC(RoHs.

18000 mAh Multi-Function Jump Starter
INSTRUCTION MANUAL
page 4
Safety Instructions:
Read all instructions and notes prior to using this product. Failure to read and follow safety instructions could result in fire, explosion, electrical shock or other hazard
causing serious and/or fatal injury and/or property damage.
1. Do not modify, disassemble, open, drop, crush, puncture, or shred this product
2. No serviceable parts are inside
3. Do not expose this product to rain or water
4. Avoid excessive heat (open flame, sunlight, etc.)
5. Do not store in locations where temperature may exceed 158 degrees F (70C)
6. Charge Multi-Function Jump Starter only with included AC or DC car adapter
7. Charge Multi-Function Jump Starter in ambient temperatures between 32-104 degrees F (0-40C)
8. Do not use near flammable liquids, gasses, or dust
9. Keep product away from children
Questions? Please email us at: [e-mail] 2301 Kerner Blvd. Suite C, San Rafael, CA 94901 USA www.RichardSolo.com