Right On HD-5070 User manual

View Finder HD Monitor
HD-5070
User Guide
V1.001

INDEX
1.Electronic Specification….…………….…. …..01
2. On Screen Control Function…. …...…………03
3. OSD Function & Setting….…….………….…04
4. Rear view of connectors……..……………….05
5.Tally Control ..……………..………………....06
6.Accessories …..………………………….…...06
7.Assemble instruction of accessories………….07
8. Mechanical Dimension……………………….08

1. Electronic Specification
Input
1 x D-SUB
VGA IN
1 x BNC
HD/SD SDI Auto-switch
3 x BNC
YPbPr
1 x RCA
Analog Input
1 x Mini-Din
S-Video
1 x D-SUB( 9 pin)
Tally Input
Output
1 x BNC
SDI Channel (Active Through Out)
Input Signal
Analog
Composite (CVBS) / S-Video 0.8Vpp
SD-SDI
270Mbps, 525i (60/ 59.94) / 625i (50)
HD-SDI
1080P/30Hz, 1080P/29.97Hz,
10801080P/25Hz
1080P/25Hz,1080P/24Hz, 1080P/23.98Hz
1080i/60Hz, 1080i/59.94Hz, 1080i/50Hz
1035i/60Hz,1035i/59.94Hz
720P/60Hz, 720P/59.94Hz, 720P/50Hz
VGA
640 X 350 (70/ 85)
720 X 350 (70/ 85)
640 X 400 (56/ 70/ 85)
720 X 400 (70/ 85)
640 X 480 (60/ 66/ 72/ 75/ 85)
800 X 600 (56/ 60/ 70/ 72 / 75/ 85)
1024 X 768 (60/ 70/ 72/ 75/ 85)
01

LCD
Size
7"
Display Area
153 x 90 mm
Resolution
1024 x 600 (16:9)
Dot Pitch
0.297 mm
Color
262K colors
Luminance of White
250cd/㎡
Contrast
400:1
Response time
20 msec
ViewingAngle
(Typical)
H: 140 degrees ; V: 110 degrees
Power
AC 100 - 240V (50 / 60Hz)
Power Consumption (Approx.)
20 Watts
Operating Temperature
0 °C to 50 °C
Storage Temperature
-10 °C to 60 °C
Dimensions (W x H x D)
187 x 171 x 122 mm
Accessory
Power supply /AC Power Cord
Gross Weight
2 Kg + 200 g
02

2. On Screen Control Function
03
1. Power On/Off button: When you push this bottom, it will Power On or
Off of LCD.
2. V1: Select Video 1 ( Composite Video ) input.
3. V2: Select Video 2 ( S-Video ) input.
4. YPbPr: Select YPbPr ( Component ) input.
5. SDI: Select HD or SD input ( auto-switch).
6. : Increase the degree of the function that you selected.
7. : Decrease the degree of the function that you selected.
8. MENU: Show function menu list, when you push this key.
9. RESET: Save your personal setting and exit to menu mode.
TALLY indicator

3. Menu Functions
Display Mode
4:3 and 16:9 video mode for user selection.
Brightness
Adjust the brightness of screen.
Adjustment range 0~15.
Contrast
Adjust the contrast of screen.
Adjustment range 0~127.
Color Mode
Adjust independent R.G..B Color level.
Color- R
Color- G
Color- B
Saturation
Adjust the Saturation of screen :
Adjustment range 0~255.
Sharpness
Adjust the Sharpness of screen :
Adjustment range 0~15.
Blue Only
Select only Blue channel for display of image.
H/V delay
Used for displaying Sync and Blanking timing.
Marker
Used for safe area .
Reset: Save your personal setting and exit to menu mode.
04

4. Rear View of connectors
05
Pb
Pb
Y
S-Video
Composite
POWER
TALLY
SDI-IN
SDI-OUT
Power On/Off

5.Accessories
6.1 Power supply
6.2 Battery
6.3 Battery install kit and screws
6. Tally Control Pin define
Please use Dub 9 pin cable as above Pin 1 and Pin 6 circuit.
06

7. Assemble Instruction of Accessories
Step 1:
Install the screw into middle hole of stand and fixed to camcorder, there
is a top hole of camcorder which is for light position, you can use it
easily. Monitor can be tilted up/down 15 degree C.
Step 2:
If request additional Battery, battery set will be assembled in rear side
Of screen and it can be rechargeable by 12V, 4mA power supply.
07

7. Mechanical Dimension
08
Unit：mm