Right On RBM-2401D User manual

24" 3G Waveform Monitor
RBM-2401D User Manual
Ver : 2.0

- 2 -
Contents
Caution ------------------------------------------------------------ 3
Warranty ---------------------------------------------------------- 4
Specification ----------------------------------------------------- 5
Formats ------------------------------------------------------------ 6
External Control ------------------------------------------------------- 19
Dimension ----------------------------------------------------------- 28
Accessory ---------------------------------------------------------------- 29
Controls ------------------------------------------------------------ 8
Front Panel
--------------------------------------------------------------- 8
Menu Function --------------------------------------------------------- 7
Shortcuts
---------------------------------------------------------------- 10
Rear Panel
-------------------------------------------------------------- 11
Auxiliary Function ---------------------------------------------------- 13
RS-232 Remote Control -----------------------------------------
19
RJ-45 Remote Control -------------
--------------------------------22
Tally Control -------------------------
---------------------------27
Standard Accessory ----------------------------------------
-------29
Optional Accessory -------------------
-------------------------30

- 3 -
●All operating instructions must be read and understood before the product is operated.
●These safety and operating instructions must be kept in a safe place for future reference.
●All operating instructions must be followed.
●Do not use this unit in or near water.
●Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious
damage.
●This product must be operated on a power source specified on the specification label.
●This product should only be operate d from the type of power source indicated on the marking
label of theAC adapter. If you are not sure of the type of power available, consult your dealer
or your local power company.
●In case of using other 12V DC adapters instead of the standard adapter provided by the
manufacturer, please check the proper load capacity (or current capacity) and use an adapter
with stable voltage.
●The power cords must be routed properly to prevent people from stepping on them or objects
from resting on them. Check the cords at the plugs and product.
●Do not overload DC outlets or extension cords. Over loading can cause or electric shock.
●Except as specifically explained elsewhere in this manual, do not attempt to service this product
yourself. may expose you to dangerous voltage points or other risks, and will void your warranty.
Refer all service issues to qualified service personnel.
●Unplug this product from the wall outlet and refer to qualified service personnel under the
following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions. Adjust only
those controls that are covered by the operating instructions in this manual; improper
adjustment of other.
controls may result in damage to the unit and may often require extensive work by a qualified
technician to restore the unit to normal operation;
e. When the product has been dropped or the cabinet has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for service.
Caution

- 4 -
●Equipment is guaranteed against any manufacturing defects for one year from the date of
purchase.
●Certain parts with limited lifetime expectancy such as LCD Panels for one year
●The original purchase invoice or other documentary evidence should be supplied at the time of
any request for repair under warranty.
●Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered by
this warranty.
●All mail or transportation costs including insurance are at the expense of the owner.
●All other claims of any nature are not covered.
●Cables & batteries are not covered under warranty.
●Warranty only valid within the country or region of purchase.
●Your statutory rights are not affected.
Warranty

- 5 -
Specification

- 6 -
Compatible Resolutions and Formats
Formats

- 7 -
Menu Function

- 8 -
Front Panel
Tally Lamp
Tally lamp can be switched to a green light display. The 9 PIN D-SUB Port must be
connected.
Power On/Off Button
Press this POWER button to power on the monitor ( the indicator turns blue), press
the button again to turn off the monitor.
HV Daly Button /Zoom Knobs
Button: Shows Horizontal and Vertical blank area of input source.
Knobs: Zoom in the picture to see picture details more clearly.
Controls
1
2
3

- 9 -
Safe Area Button /CON Knobs
Button: Safe Area size includes 70/ 75/ 80/ 85/ 90/ 93/ 96 %.
Knobs: Adjusts CONTRAST of image ( 0~100 indication ).
ESC Button /BRI Knobs
Button: Exit MENU options.
Knobs: Adjusts BRIGHTNESS of image ( 0~100 indication ).
MENU Button /VOL Knobs
Button: Enter MENU options; Rotate left and right to select any function.
Knobs: Adjusts volume level ( 0~100 indication ).
Scopes Button
Choose a variety of graphic analysis with Vector, Y/RGB Histogram,
Meters and Audio (dBFS), W.F/P (Luminance, RGB/YUV Parade), All.
Use ALL button display 5 types analysis such as Vector, Y/RGB Histogram, Luminance,
RGB/YUV Parade and Audio Meter on screen.
Source Button
Select the input signal source ( SDI 1/SDI 2, HDMI, CVBS, VGA ), when feed input
source the LED light turns blue.
Shortcuts Button
Select the desired function setting F1 ~ F4, how to configure those functions ?
Please view the follow instruction (on page 10 ).
Phone
3.5mm headphone Socket; internal speaker circuit will automatically mute when
headphone is connected.
Speaker
2W speaker Left/Right, audio signal by the input select button.
4
5
6
7
8
9
10
11

- 10 -
Shortcuts
●The function can be set via the "Shortcuts menu".
●Open the "Shortcuts menu"after the first time, the selected function will remain.
●Use "Shortcuts menu"to assign F1~F4. You can assign the function from among:
Check Field, Zebra Switch, Focus Assist, False Color, Pixel To Pixel, Mirror, Freeze,
Pattern, Marker Type, Center Marker, Nine Grid, Mute, Scan Mode, Time Code,
Anamorphic Format.
OPERATION:
●Press NENU knob to display the function menu list in the top left of the screen.
●Rotate NENU knob to Shortcuts F1~F4 change the value related to this function.
●After the setting is completed, operate the F1 ~ F4 buttons on the bottom of the monitor.

- 11 -
Rear Panel
SDI 1 IN/OUT (BNC)
IN: SDI Signal input terminal that provides SDI 1 signal. (Support 3G/HD/SD)
OUT:active through-out is only outputted when SDI 1 is using the input select.
SDI 2 IN/OUT (BNC)
IN: SDI Signal input terminal that provides SDI 2 signal. (Support 3G/HD/SD)
OUT:active through-out is only outputted when SDI 2 is using the input select.
AUDIO IN (RCA)
IN: Common audio input terminal for CVBS input terminal.
CVBS IN/OUT (BNC)
IN: CVBS Signal input terminal that provides CVBS signal.
OUT:active through-out is only outputted when CVBS is using the input select.
1
2
3
4

- 12 -
HDMI IN
IN: HDMI Signal input terminal that provides HDMI signal. (Support HDMI 1.3)
VGA IN
IN: VGA Signal input terminal that provides VGA signal.
TALLY
Tally light information can be supplied.
Control 1 /2
Control (1): External control is possible by using a RS-232 signal.
Control (2): External control is possible by using a RJ-45 signal.
POWER
Attach the power cord to the monitor unit.
5
6
7
8
9

- 13 -
Auxiliary Function

- 14 -
Scopes
Time code
Luminance (16~235 Level)
RGB Parade(0~100 %)
YUV Parade (16~235 Level)
Vector
Y Histogram
RGB Histogram
Audio
Meter

- 15 -
Zebra Exposure
Focus Assist
False Color
Exposure 50
Exposure 0
low
high

- 16 -
Check Field
Pattern
Gray only
Blue only
Red only
Green only

- 17 -
Marker Display
H/V Delay
Original
H Delay
V Delay
HV Delay

- 18 -
Mirror
Nine Grids
Original
hor
ver
hor & ver

- 19 -
RS-232 Remote Control Pin Define
RS-232 Remote Control Connection
External Control

- 20 -
RS-232 Remote Control Client
Operating
1. Open the "AccessPort.exe " file.
(Please download the file from http://www.righton.com.tw)
2. Open"Tools"select "Configuration". Enter the options "Custom Baud Rate"check
"Enable"to "Serial Port Settings"confirm the COM port.
3. Choose a file to "Load ": CommandData.txt
(Please download the file from http://www.righton.com.tw)
4. Select the need to send a serial command, press the "Step Next" to send instructions.