Rivers Edge Foreman XL Exteme User manual

TREE6TANOS
PACK-N-STACK
Model RE622
Operators Manual
One-Man
Ladder Stands
FOREMAN XL EXTREME

JUMBO JACK
Model RE604

Model RE628
INCLUDES MODEL #'s:
fl
RE604, 16' Foreman XL Extreme Ladder
D RE606, 17' Timbershot Extreme Ladder
RE622, 13' Pack-n-Stack Ladder
RE602, 15' Journeyman Ladder

RE603, 15' Journeyman Extreme Ladder
RE627, 17' Oasis Ladder
fl
RE628, 17' Jumbo Jack Ladder
RE628G, 17' Jumbo Jack Ladder (Outpost Edition)
raw
Certified to TIVIA
Standards by an
Independent
Testing Laboratory
Get parts online at
www.HuntRiversEdge.com
OMRELD001
Revised 02/16/11
©2011 RETI
All Rights Reserved.

WARRANTY
Rivers EdgeTreesta nds, Inc., offers a lifetime warranty to be free from defects in materials and workmanship.This warranty applies to the o iginal owner with a proof of purchase.
All items attached to our stands (seat, strap, rope, wood, etc.) that are degradable are warranted for a period of one year. There is no warranty on paint. This warranty applies
to products that are not modified, abused or misused in a manner that deviates from the products intended usage. Rivers Edge Treestands offers no other warranty expressed
or implied nor is to be held liable for any damage that may result from any defect in a treestand manufactured by them. Warranty work must be sent directly to Rivers Edge
Treestartds and performed by them. To obtain warranty service and/or replacement instructions, you must have prior approval from Rivers Edge Treestands before
shipping your package to us by calling our customer service department at 800-450-EDGE (3343) or by writing to: Rivers Edge Treestands, Inc.. P.O. Box 755, 1690
Elm Street Cumberland, WI S4829 for a return material authorization number (RMAF).
AB items must be shipped prepaid. Rivers Edge Treestands will at no charge. repair
or replace, at their discretion, any defective stand which falls under the conditions stated above. Rivers Edge Treestands retains the rIgh to change models, specifications and
price without notice.
NOTE: You must ohms use the provided lug body harness (fall arrest system)that meets TAM standards while using this product!
This equipment has been manufactured under strict quality guidelines. As with any equipment of this type, full understanding of the instructions and its use is mandatory for
the safety of its User. Rivers Edge Treestands, Inc., is not responsible for any damages or Injuries sustained due to improper use or modification of any of its products, or due to
any use which deviates from the products Intended usage. The manufacturer also is not responsible for any injuries sustained due to failure to adhere to the instructions for
use. Any misunderstanding of its operation should be directed to manufacturer prior to Its use.
ALL RIVERS EDGE TREESTANDS COME WITH A FULL BODY HARNESS (FALL ARREST SYSTEM)THAT MEETSTMA STANDARDS, It
is the owner's responsibility to inspect
the product regulady for damage that could Inhibit the ultimate safety of the product. Failure to use or improper use of the provided Full Body Harness (Fall Arrest System) that
meets TMA standards may result in serious injury or death. ALWAYS wear the provided Full Body Harness (Fall Arrest System) that meets t MA standards while using this product.
Owner is responsibleto checkproductReid rating and must never extted maximum weight rating stated. Rivers EdgeTreestands, Inc, ' Is not responsible for any malfunction
due to normal wear and tear and/or damage caused by improper use. Improper maintenance or accIdents.This product if used safely as Intended, will give you years of trouble
free service. We hope you will enjoy the quality of our products for years to come, and have a safe hunt.
For replacement parts, phone 800450-EDGE (3343) or go online to www.HuntRiveisEdge.cr .
i
rcramarg,
Operator's Manual
Rivers Edge One-Man Ladder Stands
Rivers Edge Treestands are engineered with you the hunter In mind. We appreciate your purchase of one of our world class treestands. Follow
these few simple instructions and your stand will provide you many years of trouble-free pleasure. Instructions should be kept in a safe place and
reviewed at least annually.
If for any reason you have a problem with your product, DO NOT return to the retailer, contact the Rivers Edge customer service department at
800450-EDGE (3343) for assistance.
CONTENTS
Introduction/Warranty  2
Warnings  3
Full Body Harness (Fall Arrest System)  4-9
Inspection and Maintenance  10
Assembly/Parts Explosion/Parts List (RE604) 
11-14
Assembly/Parts Explosion/Parts List (RE606)  15-18
Assembly/Parts Explosion/Parts List (RE622)  19-23
Assembly/Parts Explosion/Parts List (RE602)  24-26
Assembly/Parts Explosion/Parts List (RE603)  27-30
Assembly/Parts Explosion/Parts List (RE627)  31-37
Assembly/Parts Explosion/Parts List (RE628/RE628G)
 38-44
Set-Up and Use Instructions (All ladders in this manual)  45-46
Bolt Guide

47
2

Check for parts online at www.huntriversedgescom or call 800450-EDGE (3343) M-F 8-5

A
WARNING
REPLACE ANY AND ALL TREESTAND STRAPS EVERY TWO
YEARS OR WHEN ANY SIGNS OF DAMAGE OR WEAR EXIST
BEFORE.
SOME MODELS INCLUDE A FOOTREST, WHICH IS DESIGNED
AS A FOOTREST ONLY. NEVER STAND ON THE FOOTREST.
BE SURE TO RAISE AND LOWER YOUR WEAPON AND GEAR
WITH A HAUL LINE. GUN BARREL END AND ARROW TIPS
MUST BE POINTED DOWN- AWAY FROM YOU.
BE SURE SEAT PAD AND/OR BUCKLES ARE SECURELY AND
CORRECTLY ATTACHED TO PREVENT ACCIDENTAL REMOVAL.
A WARNING
ALL ASSEMBLY MUST BE DONE BY THREE PEOPLE IN THIS OR-
DER AT GROUND LEVEL BEFORE UPRIGHTING.
NEVER EXCEED THE MAXIMUM STATED USE HEIGHT.
CHECK THE GROUND UNDER STAND TO MAKE SURE IT IS
FIRM AND LEVEL. SLOPED GROUND OR UNEVEN SURFACE
(ONE SIDE ON A ROCK) CAN CAUSE YOUR LADDER TO TILT
OR SHIFT OFF THE TREE AS YOU CLIMB.
CHECK EVERY LADDER SECTION CONNECTION EVERY TIME
YOU USE THE STAND BEFORE YOU LEAVE THE GROUND.
IF LADDER SECTIONS ARE SEPARATING, DO NOT USE THE
STAND.
LUBRICATION IS HIGHLY RECOMMENDED AT SLIDE TO-
GETHER POINTS OF EACH SECTION TO PREVENT BINDING.
SECTIONS ARE STACKED TOGETHER BY SLIDING SECTIONS
TOGETHER, INSIDE OF EACH OTHER. SECTIONS ARE THEN
SECURED WITH SPRING LOCK PINS.
BE SURE ALL LADDER SECTIONS ARE SEATED COMPLETELY
TOGETHER ON SWEDGED OR POCKETED ENDS OF PIPE.
STABILIZER BAR MUST ALWAYS BE CORRECTLY AND SECURELY
ATTACHED TO LADDER AND TREE BEFORE CLIMBING LADDER.
SOME MODELS INCLUDE A MULTI-PIECE STABILIZER BAR
SYSTEM. BE
SURE SPRING LOCK PIN GOES THROUGH BOTH
THE EXTENSION TUBE AND THE STABILIZER BAR.
BE CERTAIN SPRING LOCK PINS ARE LATCHED SECURELY TO
PREVENT ACCIDENTAL REMOVAL.
BE SURE YOUR DOUBLE KNOTS ARE ALL SECURE ON ALL
ROPE CONNECTIONS.
NEVER ASCEND OR DESCEND LADDER WITHOUT TIE-OFF
ROPES SECURELY HOLDING LADDER TO TREE AND STABI-
LIZER BAR SECURELY ATTACHED.
Operator's Manual
Rivers Edge One-Man Ladder Stands
st - CAN'lairc.-S
WARNINGS
A
WARNING
DO NOT USE THIS PRODUCT UNTIL YOU HAVE WATCHED
THE INCLUDED TREESTAND SAFETY DVD, UNDERSTAND IT
AND PRACTICED THE TECHNIQUES FOR SAFE HUNTING DIS-
CUSSED IN THIS DVD.
YOU MUST ALWAYS USE THE PROVIDED FULL BODY HAR-
NESS (FALL ARREST SYSTEM) THAT MEETS TMA STAN-
DARDS WHILE USING THIS PRODUCT. SINGLE SAFETY BELTS
AND CHEST HARNESSES ARE NO LONGER ALLOWED AND
SHOULD NEVER BE USED.
IF YOU ARE NOT WEARING A FULL BODY HARNESS THAT
IS PROTECTING YOU FROM A FALL, DO NOT LEAVE THE
GROUND.
FAILURE TO USE OR IMPROPER USE OF THE PROVIDED FULL
BODY HARNESS (FALL ARREST SYSTEM) THAT MEETS TMA
STANDARDS MAY RESULT IN SERIOUS INJURY OR DEATH1READ,
UNDERSTAND AND FOLLOW ALL INSTRUCTIONS. IF ANY IN-
STRUCTIONS ARE NOT UNDERSTOOD OR IF YOU HAVE A PARTS
ISSUE CALL 800-450-EDGE (3343) BEFORE USING.
READ, UNDERSTAND AND FOLLOW ALL ASSEMBLY, INSPEC-
TION, MAINTENANCE, FULL BODY HARNESS (FALL ARREST
SYSTEM) & USE INSTRUCTIONS PROVIDED BEFORE EACH
USE. FAILURE TO FOLLOW ALL WARNINGS AND INSTRUC-
TIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
READ AND PERFORM ALL INSPECTION AND MAINTENANCE
TASKS BEFORE EACH AND EVERY USE (REPLACE ANY QUES-
TIONABLE COMPONENTS IMMEDIATELY WITH RIVERS EDGE
ORIGINAL REPLACEMENT PARTS). DO NOT LEAVE YOUR
STAND OUTDOORS - REMOVE AFTER EACH USE AND STORE
INDOORS!
INSTRUCTIONS SHOULD BE KEPT IN A SAFE PLACE AND RE
VIEWED AT LEAST ANNUALLY.
DOUBLE CHECK ASSEMBLY STEPS TO BE CERTAIN YOU HAVE
CORRECTLY ASSEMBLED THIS PRODUCT.
DO NOT CRUSH TUBING WHEN TIGHTENING BOLT ASSEM-
BLIES! IDENTIFY AND FAMILIARIZE YOURSELF WITH ALL
PARTS BEFORE YOU START. A BOLT IDENTIFICATION CHART
CAN BE FOUND IN THE BACK.
DO NOT EXCEED THE TOTAL FIELD RATING- 300 LBS.
NEVER USE ANY PRODUCT THAT HAS NOT BEEN MAIN-
TAINED OR INSPECTED PROPERLY - YOUR LIFE DEPENDS
ON IT!
WHEN HUNTING FROM A TREESTAND, FALLS CAN OCCUR
ANY TIME AFTER LEAVING THE GROUND CAUSING INJURY
OR DEATH.
NEVER ATTACH TO A DEAD, ODD-SHAPED, LEANING, DIS-
EASED, LOOSE-BARKED TREE OR UTILITY POLES.
Check for parts online at www.huntriversedge.com
or call 800-450-EDGE (3343) M-F 8-5

3

Operator's Manual
Rivers Edge One-Man Ladder Stands
FULL BODY HARNESS (FALL ARREST SYSTEM)
ALL LADDER STYLE TREESTANDS INCLUDE A TREE BELT THAT MUST BE USED IN ACCORDANCE WITH THE FULL BODY HARNESS (FAS) SUP-
PLIED.
For safety reasons, take time to read each section of these instructions for proper attachment, use and maintenance of this Full Body Harness
(FM).
To ensure your personal safety, you must read these instructions before using this product. Failure to do so could result in serious personal injury
or death.This product Is certified to TMA Standards by an IndependentTesting Laboratory. It is the responsibility of the user to follow all instruc-
tions provided, warnings listed, installation, set up, and use of this product.
If you have any questions or do not understand any instructions or warnings listed please call 800-450-EDGE (3343) before attempting to use.
A
WARNING
YOU MUST READ, UNDERSTAND, AND FOLLOW ALL IN-
STRUCTIONS PROVIDED, AND WARNINGS LISTED AT ALL
TIMES. FAILURE TO DO SO COULD RESULT IN SERIOUS IN-
JURY OR DEATH.
THE PROVIDED FULL BODY HARNESS (FAS) IS DESIGNED
TO STOP YOUR FALL BUT DOES NOT REMOVE THE RISK OF
SERIOUS PERSONAL INJURY OR DEATH. IF YOU DO NOT UN-
DERSTAND ANY INSTRUCTIONS OR WARNINGS PROVIDED
IN THIS BOOK, YOU MUST CALL RIVERS EDGE TREESTANDS,
INC., AT 800-450-EDGE (3343) BEFORE USING.
ALWAYS WEAR THIS FULL BODY HARNESS (FAS) WHILE
USING THE RIVERS EDGE TREESTAND THAT IT WAS PUR-
CHASED WITH. FAILURE TO DO SO COULD RESULT IN SERI-
OUS INJURY OR DEATH
INSPECT THIS PRODUCT BEFORE EACH USE FOR SIGNS OF
WEAR AND/OR DAMAGE. NEVER USE A DAMAGED PROD-
UCT.
THIS PRODUCT IS DESIGNED FOR ADULT USE ONLY. ADULTS
MUST BE BETWEEN 120 LBS (MINIMUM) AND 300 LBS (MAX-
IMUM) TO USE THIS PRODUCT.
BEFORE ATTEMPTING TO USE THIS HARNESS, PRACTICE IN-
STALLING, SET UP, AND USE AT GROUND LEVEL. ONCE YOU
BECOME COMFORTABLE WITH ITS SET UP AND USE, YOU
MAY PROCEED AND USE IT AT HEIGHTS ABOVE GROUND.
DO NOT USE THIS PRODUCT OR ANY RIVERS EDGE PROD-
UCT ON UTILITY POLES, TELEPHONE POLES, OR ANY OTHER
MAN MADE STRUCTURES. USE ON STRONG, STRAIGHT, LIVE
TREES ONLY. NEVER USE IN A COMMERCIAL OR INDUSTRIAL
SETTING. USE ONLY AS A FULL BODY HARNESS (FAS) WHILE
HUNTING.
FAILURE TO DISCARD AND REMOVE THIS FULL BODY HAR-
NESS (FAS) DEVICE FROM SERVICE AFTER FIVE (5) YEARS
FROM MANUFACTURE DATE, WHEN ANY SIGNS OF DAMAGE
OR WEAR EXIST, OR AFTER ARRESTING A FALL, COU LD RESULT
IN SERIOUS INJURY OR DEATH.
A
WARNING
DO NOT USE THIS OR ANY OTHER RIVERS EDGE PRODUCT
IF YOU HAVE A HISTORY OF HEALTH PROBLEMS SUCH AS
HEART PROBLEMS, BACK PROBLEMS, VISION PROBLEMS,
HIGH BLOOD PRESSURE, OR ANY OTHER PHYSICAL OR MEN-
TAL IMPAIRMENT. DO NOT USE IF YOU ARE ON ANY TYPE OF
MEDICATION OR ANY OTHER SUBSTANCE SUCH AS ALCO-
HOL THAT MAY ALTER YOUR ABILITY TO USE THIS PRODUCT
PROPERLY AND SAFELY.
DO NOT USE IN SLIPPERY OR STORMY CONDITIONS. SNOW,
ICE, FREEZING RAIN, WIND, AND LIGHTNING POSE VERY
DANGEROUS THREATS TO YOUR SAFETY. END YOUR HUNT
AND RETURN TO THE GROUND IF, INCLEMENT CONDITIONS
ARISE.
po NOT ATTEMPT TO REMOVE, MODIFY, AND/OR EXCLUDE
ANY PORTION OF THIS PRODUCT. MODIFICATION, MISUSE,
AND/OR PART SUBSTITUTION COULD RESULT IN SERIOUS
INJURY OR DEATH. IF YOU SUSPECT PARTS ARE MISSING OR
DAMAGED, IMMEDIATELY CONTACT RIVERS EDGE TREES-
TANDS, INC., AT 800-450-EDGE (3343) BEFORE USING.
THIS RIVERS EDGE FULL BODY HARNESS (FAS) WAS DE-
SIGNED AS A FALL-ARREST ONLY! po NOT UNDER ANY CIR-
CUMSTANCES USE IT TO LEAN OUT OF YOUR TREESTAND.
USING THIS PRODUCT IN SUCH A MANNER COULD RESULT IN
SERIOUS INJURY OR DEATH!
PRACTICE THE USE OF A FULL BODY HARNESS AT GROUND
LEVEL IN THE PRESENCE OF A RESPONSIBLE ADULT TO EX-
PERIENCE THE FEELING OF WEARING THIS HARNESS BE-
FORE USING IN A HUNTING ENVIRONMENT.
4

Check for parts online at wynv.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5

tree belt
left shoulder
strap
right shoulder strap
waist strap
adjustment slides
tether
Operator's Manual
Rivers Edge One-Man Ladder Stands
leg loops
USING YOUR FULL BODY HARNESS
(FALL ARREST SYSTEM)
PUTTING ON YOUR FULL BODY HARNESS
With the Full Body Harness (FAS) lying on the ground, familiarize yourself
with all of its design and features. SEE FIGURE 1.
Loosen both leg straps to the maximum position and unthread the waist
belt completely. Doing both of these actions will allow you to put the Full
Body Harness (FAS) on easier.
Now holding the harness, locate the (2) shoulder straps labeled "LEFT
SHOULDER" and "RIGHT SHOULDER", and spread them apart to make sure
there are no twists or tangles in the harness. SEE FIGURE 2.
Position yourself in front of the harness and proceed to step through each
leg loop as if you were putting on a pair of pants. SEE FIGURE 3.
Pull harness up your body to chest height where you will slide your left arm
through the"LEFTSHOULDER"strap and your right arm through theRIGHT
SHOULDER"strap as if you were putting on a jacket. SEE FIGURE 4.
NOTE: Be sure there are no twists in leg or shoulder straps. The "LEFT
SHOULDER" and "RIGHT SHOULDER"printing should be away from your
bodysoyou can reodthe words while wearing the Full BodyNarness (FAS).
If not, the harness is on inside out and must be switched.
Figure 1
Figure 2
Figure 3
right shoulder
left shoulder
Figure 4
Check for parts online at
www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 
5

Operator's Manual
Rivers Edge One-Man Ladder Stands
Tighten and adjust each leg strap so they are tight to your legs, but not
uncomfortably tight.
SEE FIGURES.
Feed waist strap through waist strap adjustment slide. Tighten and adjust
the waist strap so it is tight fit to your body, but not uncomfortably tight.
SEE FIGURE 6.
You should now have the Full Body Harness (FAS) configured with the waist
strap on your front side, shoulder straps over the proper shoulders and the
tether strap positioned on your back side.
SEE FIGURES 7 & 8.
The entire
Full Body Harness (FAS) should have a snug, tight fit to your body.
NOTE: Tether strap should not be tangled, twisted or looped around any
portion of the harness. Excess leg and waist strap can be tucked away.
Figures
Figure 6
A
WARNING
BE SURE THAT YOU ARE WEARING YOUR FULL BODY HARNESS
(FAS) CORRECTLY.
Figure?
Figure 8
pull strap up to
tighten
6 
Check for parts online at
www.huntriversedge.com
or call 800-450-EDGE (3343) M-F 8-5

Operator's Manual
Riven Edge One-Man Ladder Stands
FULL BODY HARNESS (FAS) USED WITH TREE BELT SUPPLIED WITH ALL LADDER STYLE TREESTANDS
This is the primary attachment method when using a Full Body Harness
(FAS). This method must be used while in your final hunting position
with any type of treestand. This method must be done immediately
upon reaching the foot platform of your ladder stand.
While wearing your Full Body Harness (FAS) correctly, wrap the
tree belt through the loop end of the tether and around tree. Take
the tail end of the tree belt and feed it through the (2) adjustment
slides on tree belt. SEE FIGURE 9. Pull the tail of tree belt tight.
NOTE: Be sure the (2) adjustment slides are facing away from
tree, preventing any obstruction. Do not position tether on or be-
tween the (2)tree belt adjustment slides. SEE FIGURE 9.
Once you have reached your desired hunting height, you must
slide the tree belt up the tree as high as possible. Tighten the tree
belt to the tree by pulling the tree belt tail tight. The tether strap
accommodates your freedom of movement, however, the distance
should be as short as possible to reduce the dynamic load on your
body in case of a fall.There should be no slack in tether strap while
in a sitting position.
Reverse these procedures to descend from your treestand.
A WARNING
NEVER POSITION YOURSELF IN A WAY THAT ALLOWS THE
TETHER TO BE UNDER YOUR CHIN OR AROUND YOUR NECK.
TETHER STRAP SHOULD NOT BE TANGLED, TWISTED OR LOOPED
AROUND ANY PORTION OF THE HARNESS. EXCESS LEG AND WAIST
STRAP CAN BE TUCKED AWAY.
Figure 9
Check for parts online at
www.huntriversedge.com
or call 800-450-EDGE (3343) M-F. 8-5

7

Figure 1B
Figure 2A
Figure 26
Figure IA
A
WARNING
THE SUSPENSION RELIEF DEVICE (SRD) STRAP MUST BE
ON YOUR PERSON AND ALWAYS BE READILY ACCESSI-
BLE TO YOU WHILE WEARING THE FULL BODY HARNESS
(FALL ARREST SYSTEM)! EVEN IF YOU HAVE ENCOUN-
TERED A FALL AND ARE SUSPENDED BY YOUR HARNESS
TETHER, YOU MUST HAVE ACCESS TO THE SUSPENSION
RELIEF DEVICE. ALWAYS HAVE THE SRD STRAP STORED
IN THE STORAGE POUCH SO YOU HAVE ACCESS TO IT!
1
1
Figure 3

Figure 4

Figures
Operator's Manual
Rivers Edge One-Man Ladder Stands
A WARNING
IN CASE OF A FALL...
DO NOT PANIC!
This Full Body Harness (Fall Arrest System) is designed
to prevent a fall to the ground. It will suspend you until you are able to
return to your treestand or until help arrives. Using the included Sus-
pension Relief Device (SRD) will help to maintain circulation in the legs
and help mitigate the effects of hanging suspended with your weight
resting on the leg straps of the Full Body Harness. The effects of pro-
longed suspension without using the Suspension Relief Device may
result in unconsciousness and death may occur.
Retrieve the Suspension Relief Device (SRD) strap from the storage pouch on
harness.
Insert the looped end of SRD strap through either of the climbing belt loops
sewn on harness, near the waist belt.Take the opposite end of SRD strap and
feed it through the looped end and pull tight, forming a cinch knot.
SEE FIG-
URES lA & 1B.
Take the opposite end of SRD strap and feed it through the other climbing
belt loop located on other side of harness. Once SRD strap is fed through
climbing belt loop, feed the SRD strap back through the adjustment slide.
SEE
FIGURES 2A & 2B.
Adjust SRD snap length so it forms a large loop that Is slightly shorter then the
length of your legs.
Put both feet in the loop and stand up to relieve the pressure from the harness
leg straps. SEE FIGURES 3 & 4.1f
pressure Is still felt on the leg straps while
standing on the Suspension Relief Device (SRD) strap, you must readjust the
length of the SRD map to relieve pressure off the leg straps.
You can also adjust the SRD snap to a shorter length and place your knees on
the SRD map to relieve the pressure from the harness leg straps.
SEE FIGURES.
Alternating between the standing method on feet and the kneeling method on
knees, comfort and better blood circulation are maintained.
8

Check for parts online at
www.huntriversedge.corn
or call 800-450-EDGE (3343) M-F 8-5

1 - 4.11`van.L.
Operator's Manual
Rivers Edge One-Man Ladder Stands
ALWAYS...
Be physically fit, mentally alert, and well rested before using this
product.
Read and understand all instructions provided and warnings listed
before each use and save for future reference.
Practice using at ground level first before using above ground.
For adult use only, Weight Range: Min-120 lbs. Max-300 lbs.
Inspect before each use for signs of wear and/or damage- never use
a damaged product. Replace with new.
Store in a cool, dry place. Never put away damp to avoid mildew.
NEVER...
Sleep while using this product.
Use in slippery or stormy conditions.
Exceed the Weight Range: Minimum-120 lbs. Maximum-300 lbs.
Alter the original design of your Full Body Harness (FAS).
Use to lean out from stand.
Use if history of health problems persist.
Use while intoxicated or using medication.
Loan your Full Body Harness (FAS) to someone else.
Use a damaged product, replace with new.
Use in a commercial or industrial setting.
Leave product outdoors.
A WARNING
INFORM SOMEONE OF THE HUNTING LOCATION, WHERE
THE TREESTAND WILL BE LOCATED AND THE EXPECTED DU-
RATION OF THE HUNT.
CARRY A SIGNAL DEVICE SUCH AS A MOBILE PHONE, RADIO,
WHISTLE, SIGNAL FLARE OR PERSONAL LOCATOR DEVICE (PLO)
AND IT MUST BE READILY AVAILABLE AT ALL TIMES.
FAILURE TO FOLLOW HARNESS INSTRUCTIONS COULD
RESULT IN NOT BEING ABLE TO RETURN TO THE STAND AND
BEING SUSPENDED IN A HARNESS AFTER A FALL.
IF THE HUNTING LOCATION IS UNKNOWN BY ANYONE AND
COMMUNICATION EFFORTS ARE UNSUCCESSFUL YOU
MUST HAVE A PERSONAL PLAN FOR RECOVERY/ESCAPE BE-
CAUSE PROLONGED SUSPENSION IN A HARNESS WITHOUT
THE USE OF THE SUSPENSION RELIEF DEVISE (SRD) CAN BE
FATAL. IT IS IMPORTANT TO EXERCISE THE LEGS BY PUSH-
ING AGAINST THE TREE OR DOING OTHER FORMS OF CON-
TINUOUS LEG EXERCISES TO MITIGATE SUSPENSION TRAU-
MA (BLOOD POOLING) WHILE BEING SUSPENDED.
SEVERAL OPTIONAL PRODUCTS/SYSTEMS ARE AVAILABLE
THAT OFFER SELF-RECOVERY OR SELF-EXTRACTION FROM
A FALL WHEN SUSPENDED IN A HARNESS. SOME SYSTEMS
AUTOMATICALLY DESCEND THE USER WHILE OTHERS ALLOW
USER CONTROL ONE OF THESE PRODUCTS/SYSTEMS CAN BE
CONSIDERED FOR USE AS AN ADDITIONAL SAFETY PRECAU-
TION AGAINST PROLONGED SUSPENSION AND SUSPENSION
TRAUMA. BE
SURE TO FOLLOWTHE MANUFACTURERS' DIREC-
TIONS ON THE SAFE USE OF THESE PRODUCTS/SYSTEMS.
A WARNING
EXTREME WARNING( IF FALL OCCURS WHILE USING THIS
FULL BODY HARNESS (FALL ARREST SYSTEM) YOU MUST
ALWAYS REMEMBER TO REMAIN CALM. REGAIN YOUR
THOUGHTS AND COMPOSURE AND TRY TO RECOVER AS
QUICKLY AS POSSIBLE. SOME OPTIONS YOU MAY HAVE,
BUT NOT ALL VARIABLES INCLUDE USING YOUR CLIMBING
STICKS, TREE STEPS, ETC. AS FOOTING TO RAISE YOURSELF
TO RELIEVE PRESSURE OFF THE LEG &WAIST STRAPS OR TO
RECOVER, CLIMB BACK ONTO YOUR STAND PLATFORM AND
STAY PUT UNTIL YOUR THOUGHTS AND JUDGEMENT ARE
CLEAR. IF RAISING YOURSELF IS NOT AN OPTION, CARRY A
SIGNAL DEVICE SUCH AS A MOBILE PHONE, RADIO, WHISTLE, SIG-
NAL FLARE OR PERSONAL LOCATOR DEVICE (PLD) TO CALL OR
ALERT SOMEONE TO HELP RESCUE YOU.
WHILE YOU ARE DOING ONE OR MORE OF THESE OPTIONS,
YOU MUST KEEP MOVING ALL OF YOUR LIMBS INCLUD-
ING BENDING YOUR KNEES AND LIFTING YOUR LEGS UP TO
PROMOTE CIRCULATION THROUGHOUT YOUR BODY.
THE SUSPENSION RELIEF DEVICE (SRD) STRAP MUST BE ON
YOUR PERSON AND ALWAYS BE READILY ACCESSIBLE TO
YOU WHILE WEARING THE FULL BODY HARNESS (FALL AR-
REST SYSTEM)! EVEN IF YOU HAVE ENCOUNTERED A FALL
AND ARE SUSPENDED BY YOUR HARNESS TETHER, YOU
MUST HAVE ACCESS TO THE SUSPENSION RELIEF DEVICE.
ALWAYS HAVE THE SRD STRAP STORED IN THE STORAGE
POUCH SO YOU HAVE ACCESS TO
THE SUSPENSION RELIEF DEVICE IS DESIGNED FOR PRO-
VIDING IMMEDIATE RELIEF FROM PROLONGED SUSPEN-
SION TRAUMA. IF YOU ARE NOT PHYSICALLY ABLE TO PER-
FORM THE STEPS INVOLVED IN THE CORRECT USE OF THIS
SUSPENSION RELIEF DEVICE (SRD) STRAP, YOU SHOULD
HUNT FROM GROUND LEVEL ONLY.
HUNTERS WITH VARYING DEGREES OF PHYSICAL FITNESS
MAY REQUIRE DIFFERENT PLANS TO RECOVER/ESCAPE THE
EFFECTS OF PROLONGED SUSPENSION. IF YOU DO NOT RE-
COVER QUICKLY, OR KEEP MOVING TO . PROMOTE BLOOD
CIRCULATION, UNCONSCIOUSNESS AND DEATH MAY OC-
CUR. HAVE A PERSONAL PLAN AND PRACTICE IT IN THE
PRESENCE OF A RESPONSIBLE ADULT BEFORE LEAVING THE
GROUND. NO ONE ESCAPE/RESCUE PLAN WILL WORK FOR
EVERY HUNTER ON EVERY TREE IN EVERY CIRCUMSTANCE.
ONLY YOU CAN DETERMINE THE BEST RECOVERY/ESCAPE
PLAN FOR YOUR HUNTING SITUATION BEFORE LEAVING
THE GROUND. HUNT FROM THE GROUND WHEN SELF-
RECOVERY/ESCAPE ABILITY IS ABSENT. THERE IS TIME TO
MAKE A CORRECT DECISION ON WHAT ACTION TO TAKE IF
A FALL OCCURS WHILE WEARING A FULL BODY HARNESS.
IT IS IMPORTANT TO REMEMBER, "DO NOT PANIC: REMAIN
CALM AND IMPLEMENT YOUR PRACTICED RESCUE, RELIEF
AND RECOVERY PLAN.
9
Check for parts online at
www.huntriversedge.com
or call 800-450-EDGE (3343) M-F 8-5

Operator's Manual
Rivers Edge One-Man Ladder Stands
ALWAYS...
Be physically fit, mentally alert, and well rested before using this product.
Read, understand and follow all warnings and instructions before use and
save for future reference.
Use the provided Full Body Harness (Fall Arrest System) that meets TMA
standards immediately upon reaching foot platform.
Be fully aware of foot placement.
Recommended for adult use only.
Inspect ladder for missing parts, all hardware condition, and damage
before every application, replace if necessary.
Pull up a bow, backpack, firearm or other equipment only after being
secure in the treestand and a fire arm must be pulled up with it unloaded,
chamber open and muzzle down.
Remove ladder after every use, store product indoors.
Use only Rivers Edge original replacement parts.
Lean forward, towards tree, when ascending and descending ladder.
Place ladder on dry, level ground.
Lubricate all slide together points to prevent binding, wear, rust & noise.
Avoid all electrical power lines.
Always inform someone of the hunting location, where the treestand will
be located and the expected duration of the hunt
Carry a signal device such as a mobile phone, radio, whistle, signal flare or
personal locator device (PLD) and it must be readily available at all times.
Inspect the treestand and all safety devices each time before use and do
not store a treestand outdoors when not in use.
NEVER...
Sleep in a treestand
Use on wet, soft, or unstable ground.
Exceed the total field rating of 300 lbs.
Attach to a dead, odd-shaped, leaning, diseased, loose barked trees or
utility poles.
Use on trees with a diameter smaller than 12 inches or no larger than 20 inches.
Use a treestand during inclement weather such as rain, lightning,
windstorms or icy conditions and end your hunt and return to the ground
if inclement conditions arise.
Alter the original design of your stand.
Jump on or use in a careless manner.
Lean out over edge of device.
Use when intoxicated or using over-the-counter medication or prescription
drugs.
Use a damaged product, replace with new.
Loan your stand to someone else.
Use without stabilizer bar, spring lock pins & tie-off ropes securely attached.
Stand on the seat, it is designed for sitting only.
Use a treestand when feeling ill, nauseous or dizzy, or if you have a prior
medical condition that could cause a problem i.e., heart condition, joints
that lock-up, spinal fusion, etc or if you are not well rested.
Rely on a tree branch for support.
Jump or bounce on a treestand to seat it to the tree
INSPECTION AND MAINTENANCE SCHEDULE
FOR ALL RIVERS EDGE PRODUCTS
Inspect all webbing, rope, cord, and strap assemblies for wear or damage.
Inspect cables and cable ends for damage or kinking.
Inspect all hardware and chain components for damage.
Inspect for any structural damage to product. (Return to factory for repair or
discard product if any damage is found.)
Inspect all nut and bolt assemblies to be certain none are loose.
Inspect for any missing parts.
lubricate all pivot and slide together points withipowder graphite to prevent noise,
wear, and rust.
Inspect entire product for any rust, corrosion! cracks, freezing, excessive heat,
or rotting damage that may effect the safety of your product. Discard any
questionable product.
Inspect entire product for any structural damage - pay close attention to all
weld locations. (Return to factory for repair or discard product if any damage
is found.)
Using correct wrenches inspect all nut & bolt assembly locations and snug up
any that may be loose. Be careful not to crush tubing when tightening!
Inspect and check operation of all cables, cable ends, cord, rope, webbing, and
strap or chain assemblies. Replace with factory new any item or assembly that
shows signs of wear, damage, kinking, or functions incorrectly.
Inspect seat. Replace any seat with factory new that shows signs of structural
damage or wear.
Inspect all hardware for wear or damage, also be sure you have no missing parts.
Never modify your stand in anywaybymaking repairs, replacing parts, or altering
adding or attaching anything to it except if explicitly authorized in writing by
the manufacturer.
10  Check for parts online at www.huntriversedge.com
or call 800-450-EDGE (3343) M-F 8-5

locknuts
\ 1 11
1/4-20x 1-1/2" bolts
foot platform flat bars
foot platform
flared rails - - " r
locknuts
1/4-20 x 2-1/e bolts
1/4-20 x 3" bolts
steel washers
armrests
side rails
seat frame
locknuts
1/4-20 x 2-1/4 bolts
1/4-20x 1-3/4" bolts
steel washers
tree blade
side rails
seat frame
locknuts .
shooting rail mounts
tree blade extension tubes
V:704ChEE
-
MECST,\NDa
Operator's Manual
Rivers Edge One-Man Ladder Stands
ASSEMBLY INSTRUCTIONS (RE604)
Tools needed - two 7/16" wrenches
IMPORTANT ASSEMBLY TIP.
Do not tighten any nut and bolt combinations
completely until all parts are assembled together! Finger tighten plus one
turn of a wrench only! This will temporarily hold the lock nut on the bolt while
helping alignment of all parts! Altera!, parts are assembled together, all nut
& bolt combinations must be completely tightened.
Attach the foot platform (112ML51) to the inside of flared rails (112ML61)
using (2) provided 1/420 x 2-1/4" bolts and locknuts.
SEE FIGURE 1. DO
NOT tighten all nut &bolt assemblies completely!
NOTE:Mesh surface should be on top with squared ends of platform dos-
est to flared rails.
Attach the foot platform flat bars (AL7) to the inside of flared rails and the
outside of foot platform using (4) provided 1/4-20x 1-1/2" bolts and locknuts.
SEE FIGURE 1.
Attach the seat frame (112ML63) in between the side rails (112ML60), and
the armrests (LFX5) to outside of side rails using (4) provided 1/4-20 x 3"
bolts, locknuts and steel washers.
SEE FIGURE 2.
NOTE: Mesh surface should be on top with squared ends of seat frame
closest to ends of side rails..
Attach the (2) tree blade extension tubes (112ML62) to the bottom side of
seat frame using (4) provided 1/4-20 x 2-1/4" bolts, locknuts and steel
washers.
SEE FIGURE 3.
Attachthetreeblade (2ML130)tothetopsideoftree bladeextensiontubes using
(2) provided 1/4-20 x 2-1/4" bolts, locknuts and steel washers. SEE
FIGURE 3.
Attach the (2) shooting rail mounts (112ML53) to the side rails using (2)
provided 1/4-20 x 1-3/4" bolts and locknuts.
SEE FIGURE 3. You must now
tighten all nut & bolt assemblies. Be sure not to over tighten or crush
tubing when tightening!
Figure 2
Figure 3
Figure I
Check for parts online at
www.huntriversedge.com
or call 80p-450-EDGE (3343) M-F
. 8-5 
11

seat cushion
9" camo sleeves
24" camo sleeve
shooting rail --- ----a
shooting rail mounts
spring lock pins
stabilizer bar extension tube
stabilizer bar
spring lock pins
Figure 6
TA C€BTANDa
Operator's Manual
Rivers Edge One-Man Ladder Stands
a. Attach the shooting rail (112ML21) by setting rail down over rail studs.SEE
FIGURE 4. Lubrication is recommended to prevent binding and noise.
b. Attach the (2) provided 9" and (1) 24" camo foam pads to the armrests
and shooting rail by wrapping around tubing and attaching Velcro together.
Attach the removable seat cushion (48016) to the top of seat frame. Wrap
the velcro seat straps or buckle straps around seat frame and secure
together. Snap the side release buckles together for buckle style seats. Pull
straps tight so seat is not loose.
Sections are assembled on the ground in the following order: bottom
section (51_44 ladder); second section (SL43 ladder); third section (SL60
ladder); fourth section (112ML61 flared rails with foot platform attached);
top section (assembled top sitting section).
SEE FINISHED 16' FOREMAN
XL EXTREME LADDER.
With all sectionsassembled together on ground, secure all sections together
using (8) provided spring lock pins. Handle of spring lock pin must be put
to the outside of ladder side rails.
SEE FIGURE 4.
Figure 4
A
WARNING
FOOT PLATFORM AND SITTING SECTION MUST ALWAYS
FACE THE SAME DIRECTION, TOWARDS THE TREE.
11 . a. Attach the stabilizer bar extension tube (1ML23) to the second ladder
section mounting bracket using (1) provided spring lock pin.
SEE FIGURE
5.
b. Slide the stabilizer bar (Li 7) into the extension tube and attach the two
pieces together using (1) provided spring lock pin. Spring lock pin must go
through both the extension tube and the stabilizer bar at appropriate hole
to achieve desired distance from tree. Adjustment in length may be needed
when ladder is uprighted later in instructions.
SEE FIGURE 5.
12. a.Tie one end of the provided 9' rope to the link welded onto the
stabilizer bar, just in front of the tree hugger.
Be sure your double knot
is secure. SEE FIGURE 6.
b.Tie one end of each of the provided 15'ropes to the tree blade extension
tubes, just in front of the bolt-on tree blade.
Be sure your double knots
are secure. SEE FIGURE 6.
Figures
12
Check for parts online at
www.huntriversedge.com
or call 800-450-EDGE (3343) M-F 8-5

Operator's Manual
Rivers Edge One-Man Ladder Stands
FINISHED 16' FOREMAN XL EXTREME LADDER
ratchet strap
top section
fourth section
5 tie-off ropes
9 stabilizer bar rope
stabilizer bar
stabilizer bar extension tube
spring lock pins
bottom section
third section
second section --a-
Check for parts online at www.huntriversedge.tom'or
call 800-450-EDGE (3343) M-F 8-5

13

LADDER PARTS (RE604)
15
12
dperator's Manual
Rivers Edge One-Man Ladder Stands
LADDER PARTS LIST (RE604)
NO EXTENSIONS AVAILABLE FOR THIS MODEL,
TESTED FOR 16 MAXIMUM HEIGHT!
KEY # PART #
DESCRIPTION
QTY.
1 4824013
BOLT, HHCS, GAS BLK 1/4-20 X 1-1/2"
4
2 482508
BOLT, HHCS, GAS BLK 1/4-20 X 1-3/4"
2
3 482618
WASHER, BLK 1/4"
10
4 4827113
BOLT 1 / 4 -20 X 2
ZN
1/4 HHCS GR5 BLK
8
5
482808 BOLT, HHCS, GR5 BLK 1/4-20 X 3"
4
6
4875213
NUT, FLANGED, NYLOCK 1/4-20
18
7
63281 SPRING LOCK PIN,
TAINER 1/4 X 1-3/4"
ROUNDED RE-
10
8
1ML23 STABILIZER SUPPORT TUBE
1
9
2ML130 TREE BLADE
 1 1
10 112ML21
SHOOTING RAII I _
11
112ML51
FOOT PLATFORM
1
12 112ML53
SHOOTING RAIL MOUNT
2
13
112ML60 SIDE RAIL, J-PIPE
2
14 112ML61 FLARED RAIL
2
15 112ML62
[
EXTENSION TUBE, TREE BLADE
2
16 112ML63 SEAT FRAME
1
17 AL7
SIDE SUPPORT, FOOT PLATFORM
2
18
L17
STABILIZER BAR
1
19 LFX5
ARM REST, BOLT
-ON 2
20
SL43
3-STEP LADDER WNAM, PIN STYLE
1
21 SL44
4-STEP LADDEFI, PIN STYLE
1
22 SL60
3-STEP LADDER,
HOLE
PIN STYLE, NO 1
ITEMS BELOW NOT SHOWN
48016
SEAT, XL LADDER 1W /BACKREST
1
48738
CAMO SLEEVE WITHFOAM 24"
48736
CAMO SLEEVE I WITH FOAM 9"
2
48415 RATCHET STRAP
1
48155
FULL BODY HARNESS (FAS)
1
48691
ROPE, 9' (SOLD IN ROPE KIT ONLY)
1
48691
TIE
- OFF ROPE,
ONLY)
15' (SOLD IN ROPE KIT
2
Maximum Height -16'
Maximum Field Rating -300 lbs.
Tree Diameter Range - 12" to 20'
14 
Check for parts online at
www.huntriversedge.com
or call 800-450-EDGE (3343) M-F 8-5

armrests
shooting rail mounts
side rails
A y tree blade frame
steel washers
1/4-20 x 3-1/4" bolts
nylon washers
locknuts
bolts
locknuts
side rails
/
//
cutout view
of foot platform
1/4-20 x 2-114"
Operator's Manual
Rivers Edge One-Man Ladder Stands
ASSEMBLY INSTRUCTIONS (RE606)
Tools needed - two 7/16" wrenches
IMPORTANT ASSEMBLY TIP: Do not tighten any nut and bolt combinations
completely until all parts are assembled together! Finger tighten plus one
turn of a wrench only! This will temporarily hold the lock nut on the bolt while
helping alignment of all parts! After all parts are assemble . d together, al nut
& bolt combinations must be completely tightened.
Attach thefoot platform (48045) to the inside of side rails (1ML24) using (2)
provided 1/4-20 x 2-1/4"bolts and locknuts.SEE FIGURE 1. DO NOTtighten
all nut & bolt assemblies completely!
NOTE: Mesh surface should be on top with squared ends of platform
closest to side rails.
Attach the tree blade frame (1ML34) to the inside of side rails, and the (2)
shooting rail mounts (112ML43) and (2) armrests (LFX5) to the outside of
side rails using (4) provided 1/4-20x 3-1/4" bolts, locknuts and steel washers.

Figure 2A
SEE FIGURE 2A.
Attach seat frame (1ML15) to the tabs on the tree blade frame using (2)
provided 1/4-20x 1-1/2"bolts, locknuts, nylon washers and (4) steel washers.
SEE FIGURE 2B. Attach the (2) provided rubber bumper stops to top side
of tree blade frame by pressing in to provided holes. SEE FIGURE 2B.
NOTE: Mesh surface of seat frame should be on top.
NOTE: Nylon washers should be placed between tabs and seat frame
to
eliminate noise.
steel washers
seat frame
tabs
rubber bumpers
steel washers
1/4-20 x 1-1/2" bolts
Figure 28
tree blade frame
Figure?
Check for parts online at
www.huntriversedge.com
or call 800-450-EDGE (3343) M-F 8-5 
15

seat cushion
9" camo shelves
18" camo sleeve
shooting rail
1/4-20 x 3-1/4" bolts
steel washers
shooting rail mounts
1/4-20 x 3" bolts
support braces
locknuts
top platform section
spring lock pins
locknuts Z
ir
1/4-20 x 2-1/4" bolts
4-step ladder section
Figure 3

w/ mounting holes
stabilizer bar
Nia
/.. 6 E 2 2
Operator's Manual
Rivers Edge One-Man Ladder Stands
Insert the assembled top platform section into the top ladder section with
mounting holes (5L54). Attach the (2)support braces (48064)to the outside
of side rails, foot platform and 4-step ladder section with mounting holes
using (2) provided 1/4-20 x 3-1/4" bolts, (2) 1/4-20 x 3" bolts, (2) 1/4-20 x
2-1/4" bolts, (4) steel washers and (6) locknuts. SEE FIGURE 3. You must
now tighten all nut & bolt assemblies. Be sure not to over tighten or
crush tubing when tightening!
Attach the shooting rail (SRI 0) by setting rail down over studs on shooting
rail mounts. SEE FIGURE 3. Lubrication is recommended to prevent
binding and noise.
a. Attach theremovableseatcushion(48819)to thetopof seatframeWrapseat
straps or buckle straps around seat frame and secure together. Snap the side
releasebucklestogetherforbucklestyleseats.Pullstrapstightsoseat is notloose.
b. Attach the(2)provided 9"camosleevestothearmrestsand (1)18" camo sleeve
totheshootng rail bywrappingaroundmetaltubingandattachingVelcrotogether
The remaining (2) ladder sections are assembled to the top ladder assembly
on the ground in the following order; bottom section (SL51 ladder); second
section (SL52 ladder); third section (SLS4 ladder); top section (assembled top
platform section). SEE FINISHED 17' TIMBERSHOT EXTREME LADDER.
With all 'sections assembled together on ground, secureall sectionstogether
using (6) provided spring lock pins. Handle of spring lock pin must be put
to the outside of ladder side rails. SEE FIGURE 3.
a. Attach the stabilizer bar extension tube (1ML23) to the second ladder
section mounting bracket using (1) provided spring lock pin.
SEE FIGURE 4.
b. Slide the stabilizer bar (L17) into the extension tube and attach the two
pieces together using (1) provided spring lock pin. Spring lock pin must go
through both the extension tube and stabilizer bar at appropriate hole to
achieve desired distance from tree. Adjustment in length may be needed
when ladder is uprighted later in instruct ons. SEE FIGURE 4.
a.Tie one end of the provided 9' rope to the link welded onto the stabilizer
bar, just in front of the tree hugger. Be sore your double knot is secure.
SEE FIGURES.
brie one end of each of the provided 15' ropes to the square tube side
rails, just in front of the welded on tree blades. Be sure your double knots
are secure. SEE FIGURE 5.
Figure 4
-*•••••••
Figure 5
16

Check for parts online at www.huritriversedge.com
or call 800-450-EDGE (3343) M-F 8-5

ratchet strap
15' tie-off ropes
9' stabilizer bar rope
stabilizer bar
extension tube
spring lock pins
top section
third section
second section
bottom section
Operator's Manual
Rivers Edge One-Man Ladder Stands
FINISHED 17TIMBERSHOT EXTREME LADDER
Check for parts online at
www.huntriversedge.com
or call 800-450-EDGE (3343) M-F 8-5

17

Operators Manual
Rivers Edge One-Man Ladder Stands
LADDER PARTS
(1E606)
NO EXTENSIONS AVAILABLE FOR THIS MODEL,
TESTED FOR 17' MAXIMUM HEIGHT!
KEY # PART #
DESCRIPTION
on .
1
1ML15 SEAT PLATFORM FRAME
1
1ML23 SUPPORT TUBE, STABILIZER 1
3
1ML24 SIDE RAIL
2
4 1ML34 SEAT PLATFORM 1
5
772ML43 MOUNT, SHOOTING RAIL
2
6 48045 FOOT PLATFORM  • 1
7 48064 SUPPORT BRACE
2
8 4824013 BOLT, LIFICS GR5 BLK
1/4-20 X 1-1/2" 2
9 48261B
WASHER, BLK 1/4"
12
10
482716 BOLT, HHCS GR5 BLK 1/4-20 X 2-1/4" 4
11 482738 BOLT, HHCS GR5 BLK 1/4-20 X 3-1/4"
4
12 48280B BOLT, HHCS GRS BLK 1/4-20 X 3" 4
.  13
48679 RUBBER BUMPER STOP
2
14
63281
SPRING LOCK PIN, RO
I UNDED
RETAINER 1/4X 1-3/4"
8
15 48752B NUT, FLANGED NYLOCK 1/4-20" 14
16
L17
STABILIZER BAR  I 1
17 LFX5 ARMREST, BOLT-ON I 2
18 SL51 4-STEP LADDER, POCKET/PIN STYLE 1
19
SL52 4-STEP LADDER WNAM, POCKET/PIN STYLE
1
20 SL54 4-STEP LADDER W/MOUNTING HOLES,
POCKET/PIN STYLE I
1
21
51310 SHOOTING RAIL
1
22 •
, WN516 WASHER, NYLON BLC 5/16" 2
ITEMS BELOW NOT SHOWN
SEAT, 1" W/ BACKR ST (48819) 1
CAMO SLEEVE, 18" 48737)
CAMO SLEEVE, 9" (4736)
RATCHET STRAP (4415)
FULL BODY HARNESS (FAS) (48155)
ROPE, 9' (SOLD IN FIOPE KIT ONLY) (48691)
TIE-OFF ROPE, 15' (SOLD
ONLY) (48691)
IN ROPE KIT
Maximum Height- 17'
Maximum Field Rating -300 lbs.
Tree Diameter Range - 12" to 20"
18 
Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5

foot platform flat bars
1/4-20 x 1-1 f2" bolts
1/4-20 x 2-1/4" bolts
2-step ladder
w/stabilizer
bar mount
mesh foot platform
A
WARNING
FOOT PLATFORM AND SITTING SECTION MUST ALWAYS
FACE THE SAME DIRECTION, TOWARDS THE TREE.
, t e's
1/4-20 x 2-1/4'
tree blade frame
locknuts
steel washers
side rails
1,R,t94. 1 r
Operator's Manual
Rivers Edge One-Man Ladder Stands
ASSEMBLY INSTRUCTIONS (RE622)
Tools needed - two 7/16" wrenches
IMPORTANT ASSEMBLY TIP. DO NOT TIGHTEN NUT& BOLT COMBINATIONS
COMPLETELY UNTIL ALL PARTS ARE ASSEMBLED TOGETHER! FINGER TIGHT-
EN PLUS ONE TURN OF A WRENCH ONLY! THIS WILL TEMPORARILY HOLD THE
LOCK NUT ON THE BOLT WHILE HELPING ALIGNMENT OF ALL PARTS! AFTER
ALL PARTS ARE ASSEMBLED TOGETHER, ALL NUT & BOLT COMBINAITONS
MUST BE COMPLETELY TIGHTENED.
Attach the foot platform (1ML61), mesh side up, to the 2-step ladder section
w/ stabilizer bar mount (5L64) using (2) provided 1/4-20 x 2-1/4" bolts and
locknuts.
SEE FIGURE 1. DO NOT tighten all nut & bolt assemblies
completely!
NOTE: Mesh surface should be on top with squared ends of platform
closest to ladder.
Attach the foot platform flat bars (AL7)tothefoot platform and to the inside
of top ladder section side rails using (4) provided 1/4-20 x 1-1/2" bolts and
locknuts.
SEE FIGURE 1.
Attach sling seat (48066) to assembled top sitting section by sliding each
side rail through webbing loops of seat (3 on each side of seat). Seat should
be orientated with seat straps on bottom side of seat for comfort.
NOTE: Always have all three seat loops on each side of seat at-
tached to the side rails of assembled top sitting section.
Attach the tree blade frame (5L67)tothe side rails (SL69) using (4) provided
1/4-20 x 2-1/4"bolts, locknuts and steel washers.
SEE FIGURE 2. You must
now tighten all nut & bolt assemblies. Be sure not to over tighten or
crush tubing when tightening!
 •
S.

Sections are assembled on theground in thefollowing order bottom section
(SL62 ladder); second section (SL62 ladder); third section (5L63 ladder with
stabilizer bar mount); fourth section (assembled SL64 ladder with foot
platform); top section (assembled top sitting section).
SEE FINISHED 13'
PACK-N-STACK LADDER LINE ART.
locknuts
Figure I
Figure 2
Check for parts online at
www.huntriversedge.com
or call 800-450-EDGE (3343) M-F 8-5

19

spring lock pins
Figure 4
TRtCUTA
Hoe
Operator's Manual
Rivers Edge One-Man Ladder Stands
With all sections assembled together on ground, secureall sections together
using (8) provided spring lock pins. Handle of spring lock pin must be put
to the outside of ladder side rails. SEE FIGURE 3.
a. Attach the stabilizer bar extension tube (1ML23)tothethird ladder section
mounting bracket using (1) provided spring lock pin. SEE FIGURE 4.
b. Slide the stabilizer bar (L29) into the extension tube and attach the two
pieces together using (1) provided spring lock pin. Spring lock pin must go
through both the extension tube and the stabilizer bar at appropriate hole
to achieve desired distancefrom tree. Adjustment in length may be needed
when ladder is uprighted later in instructions. SEE FIGURE 4.
a. Tie one end of the provided 9' rope to the link welded onto the stabilizer
bar, just in front of the tree hugger. Be sure your double knot is secure.
SEE FIGURES.
b.Tie one end of each of the provided 15'ropes to the square tube side rails
and tree blade frame, just in front of the welded on tree blade.
Be sure your
double knots are secure. SEE FIGURES.
stabilizer Jr
extension tbbe
stabilizer bar
1
là

spring lock pins
Figure 3
20

Check for parts online at www.huntriversedge.com
or call 300-450-EDGE (3343) M-F 8-5