Rivers Edge CLASSIC XT RE660 User manual

Get parts online at
www.HuntRiversEdge.com
GAS/OIL
RATIO
50:1
PARTICIPATING MEMBER
PRODUCT MEETS
INDUSTRY STANDARDS
RECOGNIZED BY
P/N: 29349
REV2: 07/27/18
Maximum Height
16' 6" to armrests
© 2018 RETI
All Rights Reserved
Wear Your Harness!
Operator's Manual
MODEL RE660
CLASSIC XT
1-MAN
Ladder Stand
WE ARE HUNTERS
Maximum Field Rating
300 lbs
Tree Diameter Range
12" to 20"

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
2
Operator's Manual
CLASSIC XT 1-Man Ladder Stand
WARRANTY
RETI oers a one year warranty for all components of the treestand. These warranties apply to the original owner with a proof of purchase. These warranties
begin on the date of purchase by the rst retail consumer and continue for the period specied above. These warranties apply to products that are not modied,
abused or used in a manner that deviates from the product’s intended usage. Minor fading in color is normal and is not covered by warranty. Any corrosion
of painted surfaces that occurs as a result of paint being removed or damaged is also not covered by warranty. RETI oers no other warranty expressed or
implied. Products for which warranty work has been approved must be sent directly to RETI and performed by RETI. To obtain warranty service and/or
replacement instructions, you must obtain prior approval from RETI before shipping your package to us by calling our customer service department
at 800-450-3343 or by writing to: RETI, P.O. Box 755, 1160 Eighth Avenue, Cumberland,WI 54829 for a return material authorization number (RMA#).
All items must be shipped prepaid. RETI will, at no charge, repair or replace, in RETI’s sole discretion, any product that satises the conditions stated above.
RETI retains the right to change models, specications and price without notice.
This equipment has been manufactured under strict quality and safety guidelines. As with any equipment of this type, full understanding of the instructions and
its use is mandatory and imperative for the safety of its user. RETI is not responsible for any damages or injuries sustained due to improper use or modication
of any of its products, or resulting from any use which deviates from the product’s intended usage. RETI is not responsible for any injuries sustained due to
failure to read and adhere to the instructions for use. Any misunderstanding or questions regarding the products of their use should be directed to RETI prior
to any use. All RETI treestands are sold with a full body harness (“Fall Arrest System”) that meets standards set by the Treestand Manufacturer’s
Association (“TMA”). It is the owner’s sole responsibility to inspect the product regularly for damage, improper installation, or conditions that could jeopardize
the ultimate safety of the product. Failure to use or improper use of the provided Fall Arrest System may result in serious injury or death. ALWAYS wear the
provided Fall Arrest System while using this product. Owner is responsible to understand and follow product eld weight rating and must never
exceed maximum weight rating. RETI is not responsible for any malfunction or injury resulting from normal wear and tear, damage caused by improper use,
improper maintenance, negligence or accidents. This product, if used safely as intended, will provide trouble free service for the useful life of the product. We
hope you will enjoy the quality of our products for years to come, and have a safe hunt.
INTRODUCTION
Rivers Edge® Treestands are engineered with you the hunter in mind. We appreciate your purchase of one of our world
class treestands. Follow these few simple instructions and your stand will provide you many years of trouble-free
pleasure. Instructions should be kept in a safe place and reviewed at least annually.
If for any reason you have a problem with your product, DO NOT return to the retailer, contact the Rivers Edge®
customer service department at 800-450-EDGE (3343) for assistance.
CONTENTS
Introduction/Warranty ..................................................................................................................................................................................................................2
Warnings.........................................................................................................................................................................................................................................3-4
Inspection and Maintenance ......................................................................................................................................................................................................4
Assembly Instructions ...............................................................................................................................................................................................................5-8
Warnings.............................................................................................................................................................................................................................................9
Setup and Use Instructions.................................................................................................................................................................................................10-11
Finished Ladder............................................................................................................................................................................................................................. 12
Illustrated Parts Breakdown................................................................................................................................................................................................14-15

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5 3
Operator's Manual
CLASSIC XT 1-Man Ladder Stand
MODEL RE660
MAXIMUM USE HEIGHT  16' 6" TO ARMRESTS
MAXIMUM OCCUPANCY  ONE 1 PERSON
TOTAL WEIGHT LIMIT  300 LB
TREE DIAMETER RANGE  12”TO 20”
WARNING
This product carries strict height and weight restrictions.
Do Not use this product if you exceed the total weight
limit. Please note that the total weight limit includes the
user(s) and their equipment.
WARNING
When hunting from a treestand falls can occur any
time after leaving the ground causing injury or death.
Always wear a Fall Arrest System (FAS) comprising a full
body harness at all times after leaving the ground. You
must stay connected at all times after leaving the ground
while using climbing and hang-on treestands. Single
safety belts and chest harnesses are no longer allowed
and shall never be used. If you are not wearing a full body
harness properly attached to the tree that is protecting
you from a fall, do not leave the ground.
Read and understand all of the manufacturer’s Warnings
and Instructions and use all safety devices provided by
the manufacturer. Contact the manufacturer for any
questions. Failure to do so could result in injury or death.
Never exceed the total weight limit of the treestand.
Never use a treestand during inclement weather such as
rain, lightning, windstorms or icy conditions and end your
hunt and return to the ground if inclement conditions arise.
Never use a treestand while using drugs (even
prescription drugs) or alcohol.
Never use a treestand while feeling ill, nauseous or dizzy,
or if you have a prior medical condition that could cause
a problem, that is, heart condition, joints that lock-up,
spinal fusions, etc., or if you are not well rested. Never
sleep in stand.
Never use a treestand on a dead, leaning, diseased or
loose barked tree, or a utility pole. Always avoid electrical
power lines.
Never rely on a tree branch for support.
WARNING
Never jump or bounce on a treestand to seat it to the tree.
Pull up a bow, backpack, or rearm or other equipment
only after being secure in the treestand and a rearm
must be pulled up with it unloaded, chamber open, and
muzzle down.
Always inform someone of the hunting location, where
the treestand will be located and the expected duration
of the hunt.
A signal device such as a mobile phone, radio, whistle,
signal are or personal locator device (PLD) must be on
your person and readily available at all times.
Inspect the treestand and all safety devices each time
before use and Do Not store a treestand outdoors when
not in use.
Never modify your treestand in any way by making
repairs, replacing parts, or altering it except if explicitly
authorized in writing by the manufacturer.
Practice installing, adjusting and using your treestand at
ground level prior to using it at elevated positions. Study
your new stand to become familiar with all of its features
and design. Doing so will conrm that the product is
manufactured, assembled and installed correctly.
Instructions (written and video) shall be kept in a safe place
and reviewed at least annually. It is the responsibility of
the treestand owner to furnish the complete instructions
to any person who borrows or purchases the treestand.
Use at least three (3) people to install or take down a
ladder treestand.
The criss-cross straps/ropes and stabilization devices
must be attached before climbing to the platform.
When installing a ladder stand, always bounce on the
rst rung to set the ladder into the ground according to
manufacturer’s instructions before proceeding to climb
any higher.
Check every ladder section connection every time you
use the stand before you leave the ground. If ladder
sections are separating, do not use the stand.
Check the ground under the stand to make sure it is rm
and level. Sloping ground or uneven surface (one side on
a rock) can cause your ladder to tilt or shift o the tree as
you climb.
Always maintain three (3) points of contact when
climbing a ladder treestand. Proper three-point contact
means having either two feet with one hand or one foot
with two hands on the step portion of the ladder or
climbing aid at all times.
READ AND UNDERSTAND THE FOLLOWING WARNINGS BEFORE ASSEMBLY
STOP

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
4
Operator's Manual
CLASSIC XT 1-Man Ladder Stand
WARNING
BEFORE EACH USE PERFORM THE FOLLOWING:
• Inspect all webbing, rope, cord, and strap assemblies for
wear or damage.
• Inspect cables and/or cable ends for damage or kinking.
• Inspect all hardware and chain components for damage or
wear.
• Inspect for any structural damage to product. (If any exists
stop use immediately and call RETI Customer Service.)
• Inspect all nut and bolt assemblies to be certain none are
loose.
• Inspect for any missing parts.
• Lubricate all pivot and slide together points with powder
graphite, petroleum jelly or silicone spray to prevent noise,
wear and rust.
• Inspect entire product for any rust, corrosion, cracks,
freezing, excessive heat or rotting damage that may eect
the safety of your product. Discard any questionable
product.
• Inspect entire product for any structural damage - pay
close attention to all weld locations. (Discard product if any
damage is found.)
• Using correct wrenches inspect all nut & bolt assembly
locations and snug up any that may be loose. Be careful not
to crush tubing when tightening!
• Inspect and check operation of all cables, cable ends, cord,
rope, webbing, and strap or chain assemblies. Replace
with RETI original replacement parts any item or assembly
that shows signs of wear, damage, kinking, or functions
incorrectly.
• Inspect seat for damage or wear. Replace any seat with
factory new that shows signs of structural damage or wear.
• Never modify your stand in any way by making repairs,
replacing parts, or altering by adding or attaching anything
to it except if explicitly authorized in writing by the
manufacturer.
WARNING
INSPECTION AND MAINTENANCE
Always lean forward as you climb and attach your harness
to the tree before securing the platform to the tree and
stepping onto the platform.
Never exceed the stated maximum use height.
Do Not use this product until you have watched the
included treestand safety DVD, understand it, and prac-
ticed the techniques for safe hunting discussed in this DVD.
Read and perform all inspection and maintenance tasks
before each and every use. Replace any questionable
components immediately with RETI original replacement
parts.
Do Not crush tubing when tightening bolt assemblies!
Identify and familiarize yourself with all parts before you
start. Bolt identication chart can be found on the follow-
ing page of the manual.
Double check assembly steps to be certain you have
correctly assembled this product.
Never use any product that has not been maintained or
inspected properly - Your life depends on it!
Replace any and all treestand straps every two years or
when any signs of damage or wear exist before.
Always wear the appropriate footwear when using a
ladder treestand. A good non-slip safety boot is import-
ant to your personal safety. Be especially careful that
boot laces do not get hooked on the stand or any of its
components (tuck shoelaces into boots before climbing).
Only use approved RETI parts. Failure to do so may result
in serious injury or death!

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5 5
Operator's Manual
CLASSIC XT 1-Man Ladder Stand
IMPORTANT ASSEMBLY TIP:
Do not tighten any nut and bolt combinations completely until all
parts are assembled together! Finger tighten plus one turn of a wrench
only! This will temporarily hold the lock- nut on the bolt while helping
alignment of all parts! After all parts are assembled together, all nut
and bolt combinations must be completely tightened.
ASSEMBLY INSTRUCTIONS
All assembly must be done in this order at ground level before
uprighting.
Do not remove labels/warnings from product, they are there
for your safety.
Recommended for adult use only.
FIGURE 1
FIGURE 2
NOTE: When selecting a tree to install the treestand in, never use
a treestand on a dead, leaning, diseased or loose barked tree, or
a utility pole. Always avoid electrical power lines.
1. Slide the seat assembly (11) over the two seat side rails (3) in the
direction as demonstrated in FIGURE 1.
2. Connect the seat side rails (3) to the tree blade (4) using four
1/4-20 x 2-1/4 IN bolts (19) and four 1/4-20 nuts (15). SEE FIGURE 2.
11
3
3
19
4
15
TOOLS NEEDED: two 7/16 IN wrenches.

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
6
Operator's Manual
CLASSIC XT 1-Man Ladder Stand
FIGURE 3
FIGURE 4
3. Attach the spreader bar (5) and both armrests (8) to the outer
edge of the seat side rails (3) using four 1/4-20 X 2-1/4 IN bolts
(19), four yellow washers (16), and four 1/4-20 nuts (15).
SEE FIGURE 3.
NOTE: The spreader bar tabs should be seated between
the armrests and the seat side rail.
19
16 15
8
16
15
19
3
5
6
18
14
2
3
15
4. Locate the two ared platform rails (2) and insert them into the
seat side rails (3). Line up the holes from each support bar (6) with
the hole from the ared platform rail (2) and seat side rail (3)
connection. Connect all three components together using two
1/4-20 X 1-1/2 IN bolts (18), two washers (14) and two 1/4-20 nuts (15).
SEE FIGURE 4.

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5 7
Operator's Manual
CLASSIC XT 1-Man Ladder Stand
FIGURE 5
FIGURE 5
15
2
16 19
18
14
6
5. Take the foot platform (1) and align holes in the outer edges with
holes in free end of support bars (6), and ared platform rails (2) as
shown in FIGURE 5. Secure the support bars (6) to the rear of the
foot platform (1) with two 1/4-20 X 1-1/2 IN bolts (18), two washers
(14), and two 1/4-20 nuts (15).
6. Two 1/4-20 X 2-1/4 IN bolts (19), two yellow washers (16), and two
1/4-20 nuts (15) will be used on the front of the foot platform (1)
to secure it to the ared platform rails (2). SEE FIGURE 5.
ground
7. Sections are assembled on the ground in the following order:
bottom ladder section (10), middle ladder section (12), top ladder
section (9) and the top section (assembled top platform section).
Connect all parts together using six lockpins (17). SEE FIGURE 5.
10
17
12
9
1

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
8
Operator's Manual
CLASSIC XT 1-Man Ladder Stand
FIGURE 7A FIGURE 7B
FIGURE 7
10. Attach the two provided 9 IN foam pads (9) to the armrests (8) by
wrapping around tubing and attaching hook and loop together.
11. Preassemble the 16' criss-cross straps (23) and 6' ratchet strap
(21) as follows:
a. Attach the two long ends of the 16’ criss-cross straps (23) to
each side of the rear frame tube on each side of the seat
platform tree blade (4). These long stabilizer straps should be
attached by pulling the free end of the strap through the loop
end of the strap to create a cinch knot around the frame tube.
SEE FIGURE 7A AND 7B.
b. To aid in the ease of installation, pre-attach each end of the 6'
ratchet strap (21) to each side of the rear frame tube, just inside
of the 16' criss-cross strap (23) on both sides of the seat platform
tree blade (4). Use the same method as listed in step a. This way
each end of the main ratchet strap is pre-attached before the
stand is lifted from teh ground. SEE FIGURE 7B showing all
four ends attached.
FIGURE 6
8. Attach the stabilizer bar extension tube (7) to the middle
ladder section (12) through the mounting bracket with one
lockpin (17). SEE FIGURE 6.
9. Slide the stabilizer bar (13) into the extension tube (7) and attach
the two pieces together using one lockpin (17). The lockpin must go
through both the extension tube (7) and stabilizer bar (13) at
appropriate hole to achieve desired distance from tree. Adjustment
in length may be needed when ladder is uprighted later in Setup
and Use Instructions. SEE FIGURE 6.
NOTE: Treestand should ALWAYS be fully assembled on
the ground prior to mounting it in the tree.
13
717
17
12
4
4
21
23
23

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5 9
Operator's Manual
CLASSIC XT 1-Man Ladder Stand
READ AND UNDERSTAND THE FOLLOWING WARNINGS BEFORE SETUP AND USE
STOP
WARNING
Double check assembly steps to be certain you have
correctly assembled this product.
Study your new stand to become familiar with all of its
features and design. At ground level, following provided
use instructions, practice attaching stand to tree and
removing stand from tree. Practice sitting, standing, and
using this product before attaching overhead. Save these
instructions for future reference. You must always use the
provided Fall Arrest System (FAS) while using this product.
Always use at least three (3) people to install or take down
a ladder treestand. Always have two people stabilize the
ladder before climbing to the platform the rst time after
every set-up.
Be absolutely sure the tree blade(s) on stand and the
stabilizer bar are contacting tree before climbing ladder.
Stabilizer bar must always be correctly and securely
attached to ladder and tree before climbing ladder.
Make sure ladder bottom is rmly seated on dry, level
ground. Attach your harness tether to the tree before
securing the platform to the tree and stepping onto
platform. Refer to the Full Body Harness instructions.
Never ascend or descend ladder without criss-cross
straps/ropes securely holding ladder to tree and stabilizer
bar securely attached. Failure to correctly perform these
steps can cause the ladder to collapse/buckle-over
backwards during the initial ascent to attach ratchet strap
resulting in serious injury or death.
Always lean forward as you climb and attach your harness
to the tree before securing the platform to the tree and
stepping onto the platform.
WARNING
Always maintain three (3) points of contact when
climbing a ladder treestand. Proper three-point contact
means having either two feet with one hand or one foot
with two hands on the step portion of the ladder or
climbing aid at all times.
Always wear the appropriate footwear when using a
ladder treestand. A good non-slip safety boot is important
to your personal safety. Be especially careful that boot laces
do not get hooked on the stand or any of its components
(tuck shoelaces into boots before climbing).
Never stand on seat, it is designed for sitting only.
Do Not allow excessive strap buildup in ratchet as this
will prevent the ratchet teeth from engaging causing
slippage.
Always attach ratchet straps securely while using this
product!
If seat is removable, be certain it is securely attached
when in use.
Some models include a shooting rail. Never lean against,
lean over, or sit on shooting rail. It is designed as a
shooting rest only. Always be aware that the shooting rail
can swing to one side or pivot up and down.
Some models include a footrest, which is designed as a
footrest only. Never stand on footrest! Always be fully
aware of foot placement.
Some models include a multi-piece stabilizer bar system.
Be sure attachment hardware goes through both the
extension tube and the stabilizer bar.

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
10
Operator's Manual
CLASSIC XT 1-Man Ladder Stand
1. Select a straight, healthy tree. Do Not attempt to install on a tree
that is not healthy.
2. With assembled product lying on the ground, position one person
at bottom end of ladder lying on the ground. This person has to
prevent the ladder end from tilting up when platform end is lifted
and prevent the ladder from skidding across ground.
3. a. Position two people at the platform end of the ladder, lift the
platform end and continue uprighting by walking toward bottom
end of ladder and moving hands along ladder legs. Stand ladder
up against chosen straight tree on dry, level ground. Use
caution when ladder comes over center against the tree. SEE
FIGURES 8(A).
b. Step back and look at the ladder top to see that it is level. Adjust
as needed to achieve a level platform top. Make sure tree blade is
contacting tree. SEE FIGURES 8(B).
c. Step down hard on bottom step to push ladder legs into the
ground. SEE FIGURES 8(C).
4. While two people hold the stand in place, the third person should
connect the horizontal stabilizer bar to the tree. Adjust the length
of the stabilizer bar as need so it contacts the tree and is level to
the ground. Then secure it to the tree with the 6' cam strap (24)
by forming a cinch knot with both ends of the strap and running
the long end of the strap through the cam buckle. SEE FIGURES 9
and 10.
SETUP AND USE INSTRUCTIONS
During installation and removal of ladder treestands, you
must always and properly use the included Full Body Harness
(Fall Arrest System). Refer to the Full Body Harness instructions
included with this product for proper use.
WARNING
Never use a treestand on a dead, leaning, diseased or
loose barked tree, or a utility pole. Always avoid electrical
power lines.
A
A
B
C
FIGURE 8
FIGURE 9
FIGURE 10
B
A
C
D
E
FIGURE 11

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5 11
Operator's Manual
CLASSIC XT 1-Man Ladder Stand
5. a. Loop the D-loop end of the two 16' criss cross straps (23)
through the loop end to form a cinch knot around the ladder
rail tube. Secure beneath step rung, at the stabilizer bar height
location. SEE FIGURE 11A.
b. With the stand level and being held in place by two people,
the third person must cross one of the 16' criss cross straps (23)
behind the tree and feed the free end through the opposite
D-loop. SEE FIGURES 11B-E.
c. Criss cross the other 16' stabilizer strap (23), forming an "X"
pattern on the of the tree and feed the free end through the
opposite D-loop. SEE FIGURES 11B-E.
6. Make sure the criss cross straps and stabilizer bar strap are snug
and the tree blade is still contacting the tree.
NOTE: This ground level ladder-to-tree attachment will prevent
the ladder from pulling away from the tree while ascending to the
top for nal 6' ratchet strap (21) attachment. The same holds true
when the ladder is removed.
7. With two people securely holding the ladder, use the three point
contact climbing method to slowly climb the ladder and carefully
keep a constant hand grip on the ladder at all times. Always lean
forward, toward tree, to keep top section tree blades against the
tree. Be certain ladder bottom is rmly seated on dry, level
ground. Attach your harness tether to the tree before securing
the platform to the tree and stepping onto platform. Refer to
the Full Body Harness instructions included with this product.
8. Standing on ladder step, lean toward tree with previously installed
6' ratchet strap (21) now in hand.
a. Wrap the previously installed end of the long strap around the
tree and feed through the slot in the ratchet mechanism. SEE
FIGURE 12A.
NOTE: Be sure to feed the long strap correctly so there are no
twists in the strap.
b. Pull tail of long strap until most of the slack is taken out. Be
sure entire strap is even and at the same level all around tree.
SEE FIGURE 12B.
c. Use the ratchet to tighten the strap to tree. The tightened
strap will stabilize the stand to tree and prevent movement.
SEE FIGURE 12C.
NOTE: Make sure there is at least two full revolutions of
strap on the ratchet spool before the strap tightens. Proper
tension will ensure the stand is secured to the tree. Do not
allow excessive strap to build up in the ratchet as this will
prevent the ratchet teeth from engaging and can cause
slippage.
To release ratchet, simply pull the release lever and open
tightening lever wide open (at). SEE FIGURE 12D.
9. If necessary, re-check and adjust the 6' ratchet strap (21), 16' criss
cross straps (23) and horizontal stabilizer bar assembly to securely
attach the treestand to the tree. The tree blade must be touching
the tree. SEE FIGURE 13.
10. You are now ready to use your ladder stand.
FIGURE 12A FIGURE 12B
FIGURE 12C FIGURE 12D
IMPORTANT
Reverse the Set-Up and Use Instructions to take the
ladder stand down.
FIGURE 13
Criss Cross
Straps
Ratchet Strap

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
12
Operator's Manual
CLASSIC XT 1-Man Ladder Stand
FINISHED LADDER
top ladder
section
stabilizer bar extension tube
spring lock pins
stabilizer bar
6' cam strap
16' criss cross straps
ratchet strap
stabilizer bar
platform
middle ladder
section
bottom ladder
section

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5 13
Operator's Manual
CLASSIC XT 1-Man Ladder Stand
NOTES

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5
14
Operator's Manual
CLASSIC XT 1-Man Ladder Stand
ILLUSTRATED PARTS BREAKDOWN
9
12
10
17
7
13
17
16
19
21
15
18 14 6
14 18
3
19
16
15
8
20
19
19
5
11
4

Check for parts online at www.HuntRiversEdge.com or call 800-450-EDGE (3343) M-F 8-5 15
Operator's Manual
CLASSIC XT 1-Man Ladder Stand
PARTS LIST
ITEM # PART # DESCRIPTION QT Y.
1 29191 PLATFORM 1
2 29194 FLARED PLATFORM RAIL 2
3 29236 SEAT SIDE RAIL 2
4 29198 TREE BLADE 1
5 29213 SEAT SPREADER BAR 1
6 23701 SUPPORT BAR 2
7 1ML23 STABILIZER BAR EXTENSION 1
8 15398 ARMREST 2
9 25585 TOP LADDER SECTION 1
10 25724 BOTTOM LADDER SECTION 1
11 29398 SEWN SEAT 1
12 29386 MIDDLE LADDER SECTION W/
STABILIZER SLOT 1
13 27755 STABILIZER BAR 1
14 48261B WASHER 1/4 IN 4
15 48752B NUT 1/4-20 15
ITEM # PART # DESCRIPTION QT Y.
16 23572 YELLOW WASHER M6 6
17 19847 LOCKPIN M6 X 50.8 MM 8
18 48240B BOLT 1/420 X 11/2 IN 4
19 48271B BOLT 1/420 X 21/4 IN 10
20 48736 FOAM SLEEVE 9 IN 2
ITEMS BELOW ARE NOT SHOWN
21 MK011-1601 RATCHET STRAP 1
22 10531 FULL BODY HARNESS FAS 1
23 MK034-4511 CRISS CROSS STRAP 3/4 X 16
FT ASSEMBLY 2
24 MK021-1401 CAM STRAP W/LOOPS 1 IN X
6 FT ASSEMBLY 1
25 29336 PARTS BAG HARDWARE 1
26 48800 DVD TREESTAND SAFETY 1
NO EXTENSIONS AVAILABLE FOR THIS MODEL.
NEVER MODIFY OR EXCEED ORIGINAL STATED USE HEIGHT!

*All weights, specications and features are approximate and are subject to change without notice. Due to continuous product improvements, product images may not be exact. Warning labels in some product
images may have been removed for photography purposes only. Props shown in photos not included. Some assembly may be required.
Rivers Edge® Treestands, Inc.
1160 Eighth Avenue, PO Box 755
Cumberland, WI 54829
Phone: 800-450-EDGE (3343)
Fax: [phone]
www.HuntRiversEdge.com
WE ARE HUNTERS