Riversong Motive C User manual
SW02说明书
66*92mm 5折页+对折
正 面
Before using this product, please read the instructions carefully.
Motive C
Stylish Smartwatch
1. Charging
Activate the device by charging it with the magnetic cable initially.
Keep charging cables PIN dry.
It is strongly advised to use DC 5V 1A USB charger for charging.
You can also use your laptop/notebook for charging.
Display Touch Button Heart Rate Sensor
Push the lever to quickly
release and change the strap
2
Figure A
PRODUCT OVERVIEW
LET’S GET STARTED
A. Open the “RS Motive” app and set up user profile. (Figure B)
B. Click on “Add Device” on the next interface (Figure C)
C. Select your MAC address from the list. (Figure D)
3. Binding
2. App Download
RS Motive
3
Note: Tap and hold touch button on time interface to check your
MAC address. (Figure E)
Download “RS Motive” from “Apple Store” or “Google Play Store”
or scan the QR code below.
Compatible with Android 4.4/ iOS 9.0 & above
The connection icon on the home screen indicates successful
connection of the smartwatch with your smartphone. (Figure F)
On the main interface of your smartwatch you can check the time,
date, daily steps, heart rate, the smartwatch's battery.
Main interface
4
Figure DFigure CFigure B
Figure E Figure F
FUNCTION & OPERATION
5
Figure G
Note: The main screen interface is customizable (elements,
wallpapers, fonts, colors...), you can choose from the predefined
interface or choose your own style from the "RS Motive" app.
(Figure G)
Interface Switch
Press and hold touch button to enter function interface
RIVERSONG TECHNOLOGY CO., LTD.
Address：No. 1108 Tower B, Tian’an HighTech
Plaza Phase 1, Futian District, Shenzhen, Guangdong
Official website：www.riversongtech.com
www.riversongtech.com
You can check step
count/calories burned on
Activity page.
ACTIVITY
Note:
1. Activity data will be reset to 0:00 on your smartwatch interface
at the end of the day, you can check previous day data from your
app interface.
2. History data will get cleared in case of app reset or app removal
your smartphone. Otherwise, it will remain saved on your “RS
Motive” app. (Figure H)
7
Figure H
This week has accumulated 632 MET-min
632
8241
SLEEP
You can check sleep data on
this interface.
Note:
Sleep data will be reset to 0:00 on
your watch interface at 8:00 PM
everyday, you can check previous
day data from your app interface.
2. History data will get cleared in case of app reset or removal of
app from your smartphone. Otherwise, it will remain saved on your
“RS Motive” app. (Figure I)
Sleep data will reflect only if you are using your smartwatch while
sleeping.
8
Figure I
5000
08
08
MEASURE HR
Tap and hold touch button for 3
seconds to measure your heart
rate, you can also check your
heart rate via the “RS Motive”
app.
Note
1. Remove the protective film from heart rate sensor before usage.
2. Ensure you have worn your smartwatch correctly while
measuring heart rate.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Heart rate data is for reference only and it cannot be counted
as medical diagnose.
5. Historical heart rate data will be cleared after reset or removal
of app from your mobile phone. Otherwise, it will remain saved on
your “RS Motive” app.
9
SPORTS
Choose your sport mode and start training. You can also check
your training data on the same page. (Figure J)
Press the touch button for 3 seconds to complete your training.
Your running data will be recorded on the “RS Motive” app after
entering "Running” interface.
1. On your "RS Motive" app, activate the "outdoor running“. mode,
and activate the GPS of your smartphone.
2. Activate the "Running" mode on your smartwatch. (Figure K)
Note: Your heart rate will be continuously tracked only once
“Running" interface is activated.
10
Figure K
Figure J
Main
Interface ACTIVITY
ACTIVITY SLEEP MEASURE
HR SPORTS
MEASURE
BP SPO2 WEATHER MESSAGE CAMERA
MUSIC OTHER
SW02说明书
66*92mm 5折页+对折
正 面
Before using this product, please read the instructions carefully.
Motive C
Stylish Smartwatch
1. Charging
Activate the device by charging it with the magnetic cable initially.
Keep charging cables PIN dry.
It is strongly advised to use DC 5V 1A USB charger for charging.
You can also use your laptop/notebook for charging.
Display Touch Button Heart Rate Sensor
Push the lever to quickly
release and change the strap
2
Figure A
PRODUCT OVERVIEW
LET’S GET STARTED
A. Open the “RS Motive” app and set up user profile. (Figure B)
B. Click on “Add Device” on the next interface (Figure C)
C. Select your MAC address from the list. (Figure D)
3. Binding
2. App Download
RS Motive
3
Note: Tap and hold touch button on time interface to check your
MAC address. (Figure E)
Download “RS Motive” from “Apple Store” or “Google Play Store”
or scan the QR code below.
Compatible with Android 4.4/ iOS 9.0 & above
The connection icon on the home screen indicates successful
connection of the smartwatch with your smartphone. (Figure F)
On the main interface of your smartwatch you can check the time,
date, daily steps, heart rate, the smartwatch's battery.
Main interface
4
Figure DFigure CFigure B
Figure E Figure F
FUNCTION & OPERATION
5
Figure G
Note: The main screen interface is customizable (elements,
wallpapers, fonts, colors...), you can choose from the predefined
interface or choose your own style from the "RS Motive" app.
(Figure G)
Interface Switch
Press and hold touch button to enter function interface
RIVERSONG TECHNOLOGY CO., LTD.
Address：No. 1108 Tower B, Tian’an HighTech
Plaza Phase 1, Futian District, Shenzhen, Guangdong
Official website：www.riversongtech.com
www.riversongtech.com
You can check step
count/calories burned on
Activity page.
ACTIVITY
Note:
1. Activity data will be reset to 0:00 on your smartwatch interface
at the end of the day, you can check previous day data from your
app interface.
2. History data will get cleared in case of app reset or app removal
your smartphone. Otherwise, it will remain saved on your “RS
Motive” app. (Figure H)
7
Figure H
This week has accumulated 632 MET-min
632
8241
SLEEP
You can check sleep data on
this interface.
Note:
Sleep data will be reset to 0:00 on
your watch interface at 8:00 PM
everyday, you can check previous
day data from your app interface.
2. History data will get cleared in case of app reset or removal of
app from your smartphone. Otherwise, it will remain saved on your
“RS Motive” app. (Figure I)
Sleep data will reflect only if you are using your smartwatch while
sleeping.
8
Figure I
5000
08
08
MEASURE HR
Tap and hold touch button for 3
seconds to measure your heart
rate, you can also check your
heart rate via the “RS Motive”
app.
Note
1. Remove the protective film from heart rate sensor before usage.
2. Ensure you have worn your smartwatch correctly while
measuring heart rate.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Heart rate data is for reference only and it cannot be counted
as medical diagnose.
5. Historical heart rate data will be cleared after reset or removal
of app from your mobile phone. Otherwise, it will remain saved on
your “RS Motive” app.
9
SPORTS
Choose your sport mode and start training. You can also check
your training data on the same page. (Figure J)
Press the touch button for 3 seconds to complete your training.
Your running data will be recorded on the “RS Motive” app after
entering "Running” interface.
1. On your "RS Motive" app, activate the "outdoor running“. mode,
and activate the GPS of your smartphone.
2. Activate the "Running" mode on your smartwatch. (Figure K)
Note: Your heart rate will be continuously tracked only once
“Running" interface is activated.
10
Figure K
Figure J
Main
Interface ACTIVITY
ACTIVITY SLEEP MEASURE
HR SPORTS
MEASURE
BP SPO2 WEATHER MESSAGE CAMERA
MUSIC OTHER
SW02说明书
66*92mm 5折页+对折
正 面
Before using this product, please read the instructions carefully.
Motive C
Stylish Smartwatch
1. Charging
Activate the device by charging it with the magnetic cable initially.
Keep charging cables PIN dry.
It is strongly advised to use DC 5V 1A USB charger for charging.
You can also use your laptop/notebook for charging.
Display Touch Button Heart Rate Sensor
Push the lever to quickly
release and change the strap
2
Figure A
PRODUCT OVERVIEW
LET’S GET STARTED
A. Open the “RS Motive” app and set up user profile. (Figure B)
B. Click on “Add Device” on the next interface (Figure C)
C. Select your MAC address from the list. (Figure D)
3. Binding
2. App Download
RS Motive
3
Note: Tap and hold touch button on time interface to check your
MAC address. (Figure E)
Download “RS Motive” from “Apple Store” or “Google Play Store”
or scan the QR code below.
Compatible with Android 4.4/ iOS 9.0 & above
The connection icon on the home screen indicates successful
connection of the smartwatch with your smartphone. (Figure F)
On the main interface of your smartwatch you can check the time,
date, daily steps, heart rate, the smartwatch's battery.
Main interface
4
Figure DFigure CFigure B
Figure E Figure F
FUNCTION & OPERATION
5
Figure G
Note: The main screen interface is customizable (elements,
wallpapers, fonts, colors...), you can choose from the predefined
interface or choose your own style from the "RS Motive" app.
(Figure G)
Interface Switch
Press and hold touch button to enter function interface
RIVERSONG TECHNOLOGY CO., LTD.
Address：No. 1108 Tower B, Tian’an HighTech
Plaza Phase 1, Futian District, Shenzhen, Guangdong
Official website：www.riversongtech.com
www.riversongtech.com
You can check step
count/calories burned on
Activity page.
ACTIVITY
Note:
1. Activity data will be reset to 0:00 on your smartwatch interface
at the end of the day, you can check previous day data from your
app interface.
2. History data will get cleared in case of app reset or app removal
your smartphone. Otherwise, it will remain saved on your “RS
Motive” app. (Figure H)
7
Figure H
This week has accumulated 632 MET-min
632
8241
SLEEP
You can check sleep data on
this interface.
Note:
Sleep data will be reset to 0:00 on
your watch interface at 8:00 PM
everyday, you can check previous
day data from your app interface.
2. History data will get cleared in case of app reset or removal of
app from your smartphone. Otherwise, it will remain saved on your
“RS Motive” app. (Figure I)
Sleep data will reflect only if you are using your smartwatch while
sleeping.
8
Figure I
5000
08
08
MEASURE HR
Tap and hold touch button for 3
seconds to measure your heart
rate, you can also check your
heart rate via the “RS Motive”
app.
Note
1. Remove the protective film from heart rate sensor before usage.
2. Ensure you have worn your smartwatch correctly while
measuring heart rate.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Heart rate data is for reference only and it cannot be counted
as medical diagnose.
5. Historical heart rate data will be cleared after reset or removal
of app from your mobile phone. Otherwise, it will remain saved on
your “RS Motive” app.
9
SPORTS
Choose your sport mode and start training. You can also check
your training data on the same page. (Figure J)
Press the touch button for 3 seconds to complete your training.
Your running data will be recorded on the “RS Motive” app after
entering "Running” interface.
1. On your "RS Motive" app, activate the "outdoor running“. mode,
and activate the GPS of your smartphone.
2. Activate the "Running" mode on your smartwatch. (Figure K)
Note: Your heart rate will be continuously tracked only once
“Running" interface is activated.
10
Figure K
Figure J
Main
Interface ACTIVITY
ACTIVITY SLEEP MEASURE
HR SPORTS
MEASURE
BP SPO2 WEATHER MESSAGE CAMERA
MUSIC OTHER
SW02说明书
66*92mm 5折页+对折
正 面
Before using this product, please read the instructions carefully.
Motive C
Stylish Smartwatch
1. Charging
Activate the device by charging it with the magnetic cable initially.
Keep charging cables PIN dry.
It is strongly advised to use DC 5V 1A USB charger for charging.
You can also use your laptop/notebook for charging.
Display Touch Button Heart Rate Sensor
Push the lever to quickly
release and change the strap
2
Figure A
PRODUCT OVERVIEW
LET’S GET STARTED
A. Open the “RS Motive” app and set up user profile. (Figure B)
B. Click on “Add Device” on the next interface (Figure C)
C. Select your MAC address from the list. (Figure D)
3. Binding
2. App Download
RS Motive
3
Note: Tap and hold touch button on time interface to check your
MAC address. (Figure E)
Download “RS Motive” from “Apple Store” or “Google Play Store”
or scan the QR code below.
Compatible with Android 4.4/ iOS 9.0 & above
The connection icon on the home screen indicates successful
connection of the smartwatch with your smartphone. (Figure F)
On the main interface of your smartwatch you can check the time,
date, daily steps, heart rate, the smartwatch's battery.
Main interface
4
Figure DFigure CFigure B
Figure E Figure F
FUNCTION & OPERATION
5
Figure G
Note: The main screen interface is customizable (elements,
wallpapers, fonts, colors...), you can choose from the predefined
interface or choose your own style from the "RS Motive" app.
(Figure G)
Interface Switch
Press and hold touch button to enter function interface
RIVERSONG TECHNOLOGY CO., LTD.
Address：No. 1108 Tower B, Tian’an HighTech
Plaza Phase 1, Futian District, Shenzhen, Guangdong
Official website：www.riversongtech.com
www.riversongtech.com
You can check step
count/calories burned on
Activity page.
ACTIVITY
Note:
1. Activity data will be reset to 0:00 on your smartwatch interface
at the end of the day, you can check previous day data from your
app interface.
2. History data will get cleared in case of app reset or app removal
your smartphone. Otherwise, it will remain saved on your “RS
Motive” app. (Figure H)
7
Figure H
This week has accumulated 632 MET-min
632
8241
SLEEP
You can check sleep data on
this interface.
Note:
Sleep data will be reset to 0:00 on
your watch interface at 8:00 PM
everyday, you can check previous
day data from your app interface.
2. History data will get cleared in case of app reset or removal of
app from your smartphone. Otherwise, it will remain saved on your
“RS Motive” app. (Figure I)
Sleep data will reflect only if you are using your smartwatch while
sleeping.
8
Figure I
5000
08
08
MEASURE HR
Tap and hold touch button for 3
seconds to measure your heart
rate, you can also check your
heart rate via the “RS Motive”
app.
Note
1. Remove the protective film from heart rate sensor before usage.
2. Ensure you have worn your smartwatch correctly while
measuring heart rate.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Heart rate data is for reference only and it cannot be counted
as medical diagnose.
5. Historical heart rate data will be cleared after reset or removal
of app from your mobile phone. Otherwise, it will remain saved on
your “RS Motive” app.
9
SPORTS
Choose your sport mode and start training. You can also check
your training data on the same page. (Figure J)
Press the touch button for 3 seconds to complete your training.
Your running data will be recorded on the “RS Motive” app after
entering "Running” interface.
1. On your "RS Motive" app, activate the "outdoor running“. mode,
and activate the GPS of your smartphone.
2. Activate the "Running" mode on your smartwatch. (Figure K)
Note: Your heart rate will be continuously tracked only once
“Running" interface is activated.
10
Figure K
Figure J
Main
Interface ACTIVITY
ACTIVITY SLEEP MEASURE
HR SPORTS
MEASURE
BP SPO2 WEATHER MESSAGE CAMERA
MUSIC OTHER
SW02说明书
66*92mm 5折页+对折
正 面
Before using this product, please read the instructions carefully.
Motive C
Stylish Smartwatch
1. Charging
Activate the device by charging it with the magnetic cable initially.
Keep charging cables PIN dry.
It is strongly advised to use DC 5V 1A USB charger for charging.
You can also use your laptop/notebook for charging.
Display Touch Button Heart Rate Sensor
Push the lever to quickly
release and change the strap
2
Figure A
PRODUCT OVERVIEW
LET’S GET STARTED
A. Open the “RS Motive” app and set up user profile. (Figure B)
B. Click on “Add Device” on the next interface (Figure C)
C. Select your MAC address from the list. (Figure D)
3. Binding
2. App Download
RS Motive
3
Note: Tap and hold touch button on time interface to check your
MAC address. (Figure E)
Download “RS Motive” from “Apple Store” or “Google Play Store”
or scan the QR code below.
Compatible with Android 4.4/ iOS 9.0 & above
The connection icon on the home screen indicates successful
connection of the smartwatch with your smartphone. (Figure F)
On the main interface of your smartwatch you can check the time,
date, daily steps, heart rate, the smartwatch's battery.
Main interface
4
Figure DFigure CFigure B
Figure E Figure F
FUNCTION & OPERATION
5
Figure G
Note: The main screen interface is customizable (elements,
wallpapers, fonts, colors...), you can choose from the predefined
interface or choose your own style from the "RS Motive" app.
(Figure G)
Interface Switch
Press and hold touch button to enter function interface
RIVERSONG TECHNOLOGY CO., LTD.
Address：No. 1108 Tower B, Tian’an HighTech
Plaza Phase 1, Futian District, Shenzhen, Guangdong
Official website：www.riversongtech.com
www.riversongtech.com
You can check step
count/calories burned on
Activity page.
ACTIVITY
Note:
1. Activity data will be reset to 0:00 on your smartwatch interface
at the end of the day, you can check previous day data from your
app interface.
2. History data will get cleared in case of app reset or app removal
your smartphone. Otherwise, it will remain saved on your “RS
Motive” app. (Figure H)
7
Figure H
This week has accumulated 632 MET-min
632
8241
SLEEP
You can check sleep data on
this interface.
Note:
Sleep data will be reset to 0:00 on
your watch interface at 8:00 PM
everyday, you can check previous
day data from your app interface.
2. History data will get cleared in case of app reset or removal of
app from your smartphone. Otherwise, it will remain saved on your
“RS Motive” app. (Figure I)
Sleep data will reflect only if you are using your smartwatch while
sleeping.
8
Figure I
5000
08
08
MEASURE HR
Tap and hold touch button for 3
seconds to measure your heart
rate, you can also check your
heart rate via the “RS Motive”
app.
Note
1. Remove the protective film from heart rate sensor before usage.
2. Ensure you have worn your smartwatch correctly while
measuring heart rate.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Heart rate data is for reference only and it cannot be counted
as medical diagnose.
5. Historical heart rate data will be cleared after reset or removal
of app from your mobile phone. Otherwise, it will remain saved on
your “RS Motive” app.
9
SPORTS
Choose your sport mode and start training. You can also check
your training data on the same page. (Figure J)
Press the touch button for 3 seconds to complete your training.
Your running data will be recorded on the “RS Motive” app after
entering "Running” interface.
1. On your "RS Motive" app, activate the "outdoor running“. mode,
and activate the GPS of your smartphone.
2. Activate the "Running" mode on your smartwatch. (Figure K)
Note: Your heart rate will be continuously tracked only once
“Running" interface is activated.
10
Figure K
Figure J
Main
Interface ACTIVITY
ACTIVITY SLEEP MEASURE
HR SPORTS
MEASURE
BP SPO2 WEATHER MESSAGE CAMERA
MUSIC OTHER
SW02说明书
66*92mm 5折页+对折
正 面
Before using this product, please read the instructions carefully.
Motive C
Stylish Smartwatch
1. Charging
Activate the device by charging it with the magnetic cable initially.
Keep charging cables PIN dry.
It is strongly advised to use DC 5V 1A USB charger for charging.
You can also use your laptop/notebook for charging.
Display Touch Button Heart Rate Sensor
Push the lever to quickly
release and change the strap
2
Figure A
PRODUCT OVERVIEW
LET’S GET STARTED
A. Open the “RS Motive” app and set up user profile. (Figure B)
B. Click on “Add Device” on the next interface (Figure C)
C. Select your MAC address from the list. (Figure D)
3. Binding
2. App Download
RS Motive
3
Note: Tap and hold touch button on time interface to check your
MAC address. (Figure E)
Download “RS Motive” from “Apple Store” or “Google Play Store”
or scan the QR code below.
Compatible with Android 4.4/ iOS 9.0 & above
The connection icon on the home screen indicates successful
connection of the smartwatch with your smartphone. (Figure F)
On the main interface of your smartwatch you can check the time,
date, daily steps, heart rate, the smartwatch's battery.
Main interface
4
Figure DFigure CFigure B
Figure E Figure F
FUNCTION & OPERATION
5
Figure G
Note: The main screen interface is customizable (elements,
wallpapers, fonts, colors...), you can choose from the predefined
interface or choose your own style from the "RS Motive" app.
(Figure G)
Interface Switch
Press and hold touch button to enter function interface
RIVERSONG TECHNOLOGY CO., LTD.
Address：No. 1108 Tower B, Tian’an HighTech
Plaza Phase 1, Futian District, Shenzhen, Guangdong
Official website：www.riversongtech.com
www.riversongtech.com
You can check step
count/calories burned on
Activity page.
ACTIVITY
Note:
1. Activity data will be reset to 0:00 on your smartwatch interface
at the end of the day, you can check previous day data from your
app interface.
2. History data will get cleared in case of app reset or app removal
your smartphone. Otherwise, it will remain saved on your “RS
Motive” app. (Figure H)
7
Figure H
This week has accumulated 632 MET-min
632
8241
SLEEP
You can check sleep data on
this interface.
Note:
Sleep data will be reset to 0:00 on
your watch interface at 8:00 PM
everyday, you can check previous
day data from your app interface.
2. History data will get cleared in case of app reset or removal of
app from your smartphone. Otherwise, it will remain saved on your
“RS Motive” app. (Figure I)
Sleep data will reflect only if you are using your smartwatch while
sleeping.
8
Figure I
5000
08
08
MEASURE HR
Tap and hold touch button for 3
seconds to measure your heart
rate, you can also check your
heart rate via the “RS Motive”
app.
Note
1. Remove the protective film from heart rate sensor before usage.
2. Ensure you have worn your smartwatch correctly while
measuring heart rate.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Heart rate data is for reference only and it cannot be counted
as medical diagnose.
5. Historical heart rate data will be cleared after reset or removal
of app from your mobile phone. Otherwise, it will remain saved on
your “RS Motive” app.
9
SPORTS
Choose your sport mode and start training. You can also check
your training data on the same page. (Figure J)
Press the touch button for 3 seconds to complete your training.
Your running data will be recorded on the “RS Motive” app after
entering "Running” interface.
1. On your "RS Motive" app, activate the "outdoor running“. mode,
and activate the GPS of your smartphone.
2. Activate the "Running" mode on your smartwatch. (Figure K)
Note: Your heart rate will be continuously tracked only once
“Running" interface is activated.
10
Figure K
Figure J
Main
Interface ACTIVITY
ACTIVITY SLEEP MEASURE
HR SPORTS
MEASURE
BP SPO2 WEATHER MESSAGE CAMERA
MUSIC OTHER
SW02说明书
66*92mm 5折页+对折
正 面
Before using this product, please read the instructions carefully.
Motive C
Stylish Smartwatch
1. Charging
Activate the device by charging it with the magnetic cable initially.
Keep charging cables PIN dry.
It is strongly advised to use DC 5V 1A USB charger for charging.
You can also use your laptop/notebook for charging.
Display Touch Button Heart Rate Sensor
Push the lever to quickly
release and change the strap
2
Figure A
PRODUCT OVERVIEW
LET’S GET STARTED
A. Open the “RS Motive” app and set up user profile. (Figure B)
B. Click on “Add Device” on the next interface (Figure C)
C. Select your MAC address from the list. (Figure D)
3. Binding
2. App Download
RS Motive
3
Note: Tap and hold touch button on time interface to check your
MAC address. (Figure E)
Download “RS Motive” from “Apple Store” or “Google Play Store”
or scan the QR code below.
Compatible with Android 4.4/ iOS 9.0 & above
The connection icon on the home screen indicates successful
connection of the smartwatch with your smartphone. (Figure F)
On the main interface of your smartwatch you can check the time,
date, daily steps, heart rate, the smartwatch's battery.
Main interface
4
Figure DFigure CFigure B
Figure E Figure F
FUNCTION & OPERATION
5
Figure G
Note: The main screen interface is customizable (elements,
wallpapers, fonts, colors...), you can choose from the predefined
interface or choose your own style from the "RS Motive" app.
(Figure G)
Interface Switch
Press and hold touch button to enter function interface
RIVERSONG TECHNOLOGY CO., LTD.
Address：No. 1108 Tower B, Tian’an HighTech
Plaza Phase 1, Futian District, Shenzhen, Guangdong
Official website：www.riversongtech.com
www.riversongtech.com
You can check step
count/calories burned on
Activity page.
ACTIVITY
Note:
1. Activity data will be reset to 0:00 on your smartwatch interface
at the end of the day, you can check previous day data from your
app interface.
2. History data will get cleared in case of app reset or app removal
your smartphone. Otherwise, it will remain saved on your “RS
Motive” app. (Figure H)
7
Figure H
This week has accumulated 632 MET-min
632
8241
SLEEP
You can check sleep data on
this interface.
Note:
Sleep data will be reset to 0:00 on
your watch interface at 8:00 PM
everyday, you can check previous
day data from your app interface.
2. History data will get cleared in case of app reset or removal of
app from your smartphone. Otherwise, it will remain saved on your
“RS Motive” app. (Figure I)
Sleep data will reflect only if you are using your smartwatch while
sleeping.
8
Figure I
5000
08
08
MEASURE HR
Tap and hold touch button for 3
seconds to measure your heart
rate, you can also check your
heart rate via the “RS Motive”
app.
Note
1. Remove the protective film from heart rate sensor before usage.
2. Ensure you have worn your smartwatch correctly while
measuring heart rate.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Heart rate data is for reference only and it cannot be counted
as medical diagnose.
5. Historical heart rate data will be cleared after reset or removal
of app from your mobile phone. Otherwise, it will remain saved on
your “RS Motive” app.
9
SPORTS
Choose your sport mode and start training. You can also check
your training data on the same page. (Figure J)
Press the touch button for 3 seconds to complete your training.
Your running data will be recorded on the “RS Motive” app after
entering "Running” interface.
1. On your "RS Motive" app, activate the "outdoor running“. mode,
and activate the GPS of your smartphone.
2. Activate the "Running" mode on your smartwatch. (Figure K)
Note: Your heart rate will be continuously tracked only once
“Running" interface is activated.
10
Figure K
Figure J
Main
Interface ACTIVITY
ACTIVITY SLEEP MEASURE
HR SPORTS
MEASURE
BP SPO2 WEATHER MESSAGE CAMERA
MUSIC OTHER
SW02说明书
66*92mm 5折页+对折
正 面
Before using this product, please read the instructions carefully.
Motive C
Stylish Smartwatch
1. Charging
Activate the device by charging it with the magnetic cable initially.
Keep charging cables PIN dry.
It is strongly advised to use DC 5V 1A USB charger for charging.
You can also use your laptop/notebook for charging.
Display Touch Button Heart Rate Sensor
Push the lever to quickly
release and change the strap
2
Figure A
PRODUCT OVERVIEW
LET’S GET STARTED
A. Open the “RS Motive” app and set up user profile. (Figure B)
B. Click on “Add Device” on the next interface (Figure C)
C. Select your MAC address from the list. (Figure D)
3. Binding
2. App Download
RS Motive
3
Note: Tap and hold touch button on time interface to check your
MAC address. (Figure E)
Download “RS Motive” from “Apple Store” or “Google Play Store”
or scan the QR code below.
Compatible with Android 4.4/ iOS 9.0 & above
The connection icon on the home screen indicates successful
connection of the smartwatch with your smartphone. (Figure F)
On the main interface of your smartwatch you can check the time,
date, daily steps, heart rate, the smartwatch's battery.
Main interface
4
Figure DFigure CFigure B
Figure E Figure F
FUNCTION & OPERATION
5
Figure G
Note: The main screen interface is customizable (elements,
wallpapers, fonts, colors...), you can choose from the predefined
interface or choose your own style from the "RS Motive" app.
(Figure G)
Interface Switch
Press and hold touch button to enter function interface
RIVERSONG TECHNOLOGY CO., LTD.
Address：No. 1108 Tower B, Tian’an HighTech
Plaza Phase 1, Futian District, Shenzhen, Guangdong
Official website：www.riversongtech.com
www.riversongtech.com
You can check step
count/calories burned on
Activity page.
ACTIVITY
Note:
1. Activity data will be reset to 0:00 on your smartwatch interface
at the end of the day, you can check previous day data from your
app interface.
2. History data will get cleared in case of app reset or app removal
your smartphone. Otherwise, it will remain saved on your “RS
Motive” app. (Figure H)
7
Figure H
This week has accumulated 632 MET-min
632
8241
SLEEP
You can check sleep data on
this interface.
Note:
Sleep data will be reset to 0:00 on
your watch interface at 8:00 PM
everyday, you can check previous
day data from your app interface.
2. History data will get cleared in case of app reset or removal of
app from your smartphone. Otherwise, it will remain saved on your
“RS Motive” app. (Figure I)
Sleep data will reflect only if you are using your smartwatch while
sleeping.
8
Figure I
5000
08
08
MEASURE HR
Tap and hold touch button for 3
seconds to measure your heart
rate, you can also check your
heart rate via the “RS Motive”
app.
Note
1. Remove the protective film from heart rate sensor before usage.
2. Ensure you have worn your smartwatch correctly while
measuring heart rate.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Heart rate data is for reference only and it cannot be counted
as medical diagnose.
5. Historical heart rate data will be cleared after reset or removal
of app from your mobile phone. Otherwise, it will remain saved on
your “RS Motive” app.
9
SPORTS
Choose your sport mode and start training. You can also check
your training data on the same page. (Figure J)
Press the touch button for 3 seconds to complete your training.
Your running data will be recorded on the “RS Motive” app after
entering "Running” interface.
1. On your "RS Motive" app, activate the "outdoor running“. mode,
and activate the GPS of your smartphone.
2. Activate the "Running" mode on your smartwatch. (Figure K)
Note: Your heart rate will be continuously tracked only once
“Running" interface is activated.
10
Figure K
Figure J
Main
Interface ACTIVITY
ACTIVITY SLEEP MEASURE
HR SPORTS
MEASURE
BP SPO2 WEATHER MESSAGE CAMERA
MUSIC OTHER
SW02说明书
66*92mm 5折页+对折
正 面
Before using this product, please read the instructions carefully.
Motive C
Stylish Smartwatch
1. Charging
Activate the device by charging it with the magnetic cable initially.
Keep charging cables PIN dry.
It is strongly advised to use DC 5V 1A USB charger for charging.
You can also use your laptop/notebook for charging.
Display Touch Button Heart Rate Sensor
Push the lever to quickly
release and change the strap
2
Figure A
PRODUCT OVERVIEW
LET’S GET STARTED
A. Open the “RS Motive” app and set up user profile. (Figure B)
B. Click on “Add Device” on the next interface (Figure C)
C. Select your MAC address from the list. (Figure D)
3. Binding
2. App Download
RS Motive
3
Note: Tap and hold touch button on time interface to check your
MAC address. (Figure E)
Download “RS Motive” from “Apple Store” or “Google Play Store”
or scan the QR code below.
Compatible with Android 4.4/ iOS 9.0 & above
The connection icon on the home screen indicates successful
connection of the smartwatch with your smartphone. (Figure F)
On the main interface of your smartwatch you can check the time,
date, daily steps, heart rate, the smartwatch's battery.
Main interface
4
Figure DFigure CFigure B
Figure E Figure F
FUNCTION & OPERATION
5
Figure G
Note: The main screen interface is customizable (elements,
wallpapers, fonts, colors...), you can choose from the predefined
interface or choose your own style from the "RS Motive" app.
(Figure G)
Interface Switch
Press and hold touch button to enter function interface
RIVERSONG TECHNOLOGY CO., LTD.
Address：No. 1108 Tower B, Tian’an HighTech
Plaza Phase 1, Futian District, Shenzhen, Guangdong
Official website：www.riversongtech.com
www.riversongtech.com
You can check step
count/calories burned on
Activity page.
ACTIVITY
Note:
1. Activity data will be reset to 0:00 on your smartwatch interface
at the end of the day, you can check previous day data from your
app interface.
2. History data will get cleared in case of app reset or app removal
your smartphone. Otherwise, it will remain saved on your “RS
Motive” app. (Figure H)
7
Figure H
This week has accumulated 632 MET-min
632
8241
SLEEP
You can check sleep data on
this interface.
Note:
Sleep data will be reset to 0:00 on
your watch interface at 8:00 PM
everyday, you can check previous
day data from your app interface.
2. History data will get cleared in case of app reset or removal of
app from your smartphone. Otherwise, it will remain saved on your
“RS Motive” app. (Figure I)
Sleep data will reflect only if you are using your smartwatch while
sleeping.
8
Figure I
5000
08
08
MEASURE HR
Tap and hold touch button for 3
seconds to measure your heart
rate, you can also check your
heart rate via the “RS Motive”
app.
Note
1. Remove the protective film from heart rate sensor before usage.
2. Ensure you have worn your smartwatch correctly while
measuring heart rate.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Heart rate data is for reference only and it cannot be counted
as medical diagnose.
5. Historical heart rate data will be cleared after reset or removal
of app from your mobile phone. Otherwise, it will remain saved on
your “RS Motive” app.
9
SPORTS
Choose your sport mode and start training. You can also check
your training data on the same page. (Figure J)
Press the touch button for 3 seconds to complete your training.
Your running data will be recorded on the “RS Motive” app after
entering "Running” interface.
1. On your "RS Motive" app, activate the "outdoor running“. mode,
and activate the GPS of your smartphone.
2. Activate the "Running" mode on your smartwatch. (Figure K)
Note: Your heart rate will be continuously tracked only once
“Running" interface is activated.
10
Figure K
Figure J
Main
Interface ACTIVITY
ACTIVITY SLEEP MEASURE
HR SPORTS
MEASURE
BP SPO2 WEATHER MESSAGE CAMERA
MUSIC OTHER
SW02说明书
66*92mm 5折页+对折
正 面
Before using this product, please read the instructions carefully.
Motive C
Stylish Smartwatch
1. Charging
Activate the device by charging it with the magnetic cable initially.
Keep charging cables PIN dry.
It is strongly advised to use DC 5V 1A USB charger for charging.
You can also use your laptop/notebook for charging.
Display Touch Button Heart Rate Sensor
Push the lever to quickly
release and change the strap
2
Figure A
PRODUCT OVERVIEW
LET’S GET STARTED
A. Open the “RS Motive” app and set up user profile. (Figure B)
B. Click on “Add Device” on the next interface (Figure C)
C. Select your MAC address from the list. (Figure D)
3. Binding
2. App Download
RS Motive
3
Note: Tap and hold touch button on time interface to check your
MAC address. (Figure E)
Download “RS Motive” from “Apple Store” or “Google Play Store”
or scan the QR code below.
Compatible with Android 4.4/ iOS 9.0 & above
The connection icon on the home screen indicates successful
connection of the smartwatch with your smartphone. (Figure F)
On the main interface of your smartwatch you can check the time,
date, daily steps, heart rate, the smartwatch's battery.
Main interface
4
Figure DFigure CFigure B
Figure E Figure F
FUNCTION & OPERATION
5
Figure G
Note: The main screen interface is customizable (elements,
wallpapers, fonts, colors...), you can choose from the predefined
interface or choose your own style from the "RS Motive" app.
(Figure G)
Interface Switch
Press and hold touch button to enter function interface
RIVERSONG TECHNOLOGY CO., LTD.
Address：No. 1108 Tower B, Tian’an HighTech
Plaza Phase 1, Futian District, Shenzhen, Guangdong
Official website：www.riversongtech.com
www.riversongtech.com
You can check step
count/calories burned on
Activity page.
ACTIVITY
Note:
1. Activity data will be reset to 0:00 on your smartwatch interface
at the end of the day, you can check previous day data from your
app interface.
2. History data will get cleared in case of app reset or app removal
your smartphone. Otherwise, it will remain saved on your “RS
Motive” app. (Figure H)
7
Figure H
This week has accumulated 632 MET-min
632
8241
SLEEP
You can check sleep data on
this interface.
Note:
Sleep data will be reset to 0:00 on
your watch interface at 8:00 PM
everyday, you can check previous
day data from your app interface.
2. History data will get cleared in case of app reset or removal of
app from your smartphone. Otherwise, it will remain saved on your
“RS Motive” app. (Figure I)
Sleep data will reflect only if you are using your smartwatch while
sleeping.
8
Figure I
5000
08
08
MEASURE HR
Tap and hold touch button for 3
seconds to measure your heart
rate, you can also check your
heart rate via the “RS Motive”
app.
Note
1. Remove the protective film from heart rate sensor before usage.
2. Ensure you have worn your smartwatch correctly while
measuring heart rate.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Heart rate data is for reference only and it cannot be counted
as medical diagnose.
5. Historical heart rate data will be cleared after reset or removal
of app from your mobile phone. Otherwise, it will remain saved on
your “RS Motive” app.
9
SPORTS
Choose your sport mode and start training. You can also check
your training data on the same page. (Figure J)
Press the touch button for 3 seconds to complete your training.
Your running data will be recorded on the “RS Motive” app after
entering "Running” interface.
1. On your "RS Motive" app, activate the "outdoor running“. mode,
and activate the GPS of your smartphone.
2. Activate the "Running" mode on your smartwatch. (Figure K)
Note: Your heart rate will be continuously tracked only once
“Running" interface is activated.
10
Figure K
Figure J
Main
Interface ACTIVITY
ACTIVITY SLEEP MEASURE
HR SPORTS
MEASURE
BP SPO2 WEATHER MESSAGE CAMERA
MUSIC OTHER
背 面
MEASURE BP
Tap and hold touch button for 3
seconds to measure your Blood
Pressure, you can also check your
Blood Pressure via the “RS Motive”
app. (Figure L)
Note :
1. Remove the protective film from the Blood Pressure sensor
before usage
2. Ensure you have worn your smartwatch correctly while
measuring Blood Pressure.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Blood Pressure data is for reference only and it cannot be
counted as medical diagnose.
3. Historical Blood Pressure data will be cleared after reset or
removal of app from your mobile phone.
11
Figure L
SPO2
Tap and hold touch button for 3
seconds to measure your SPO2
(Oxygen monitoring), you can also
check your oxygen level via app.
(Figure M)
Note :
1. Remove protective film from sensor before usage.
Ensure you have worn your smartwatch correctly while measuring
oxygen level.
2. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
3. Oxygen monitoring data is for reference only and it cannot be
counted as medical diagnose.
4. Historical oxygen monitoring data will be cleared after reset or
removal of app from your mobile phone.
12
Figure M
MESSAGE
Tap and hold touch button for 3
seconds to check your messages.
WEATHER
In order to display the Weather on
your smartwatch, you need to
install first the “RS Motive” app,
and set up the location you
desired to get the weather from.
Please make sure to bind your "RS
Motive" app with your
smartwatch.
Note:
1. Latest 3 messages will
be stored in your watch
memory
2. To receive message
notification on your
smartwatch enable
notification function on
your application.
(Figure N)
13
Figure N
CAMERA
Tap and hold touch button for 3
seconds on the “Camera" page
to remotely access your mobile
phone camera.
Note: It is recommended to keep
your mobile phone unlocked
while using the function.
MUSIC
Tap and hold touch button for 3
seconds on the “Music" page to
control the music player of your
mobile phone remotely.
Note:
1.Some thirdparty music player may not be controlled by the
smartwatch.
2. It is highly recommended to use original music players for this
operation.
14
OTHER
When you are on the Other
interface on your smartwatch,
Press and hold touch button
for 3 seconds to enter other
interface.
Back: to get back in the previous screen
Switch Style: to customize the face smartwatch with preinstalled
configuration
Stopwatch: to activate the stopwatch
Mute: turn on/off the notifications vibration
Reset: reset all the data previously saved by the smartwatch
Power off: to power off the smartwatch
Brightness: to control the brightness of the smartwatch display
15
FAQ
Why the device can’t be detected while pairing with phone
Bluetooth?
1. Please make sure, mobile Bluetooth is activated meanwhile
check your mobile and watch should be in BT range.
2. While pairing, please make sure distance between mobile
phone and watch should not be more than 50cm.
Why Bluetooth can’t be connected occasionally?
Bluetooth function of some cell phones become abnormal
occasionally upon activation. Bluetooth can be start working
properly after restarting cell phone or Bluetooth.
For iOS system, why the smartwatch’s data can’t be synchronized
to the “RS Motive” app or there is no incoming calls and messages
reminder from the smartwatch after resetting or upgrading the
device firmware?
1. Please check your smartphone "Settings” > “Bluetooth” > “My
devices“ to confirm whether the Bluetooth function has been
connected to the smartwatch. If the Bluetooth is connected, click
on the icon , located next to "Connected", this in order to forget
this device, and to cancel system Bluetooth pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
1716
connected, click on the icon , located next to "Connected", this
in order to forget this device, and to cancel system Bluetooth
pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
2. Make sure that “SMS” and “Incoming call” reminder alert are
turned on in the "RS Motive" app.
Why there is no incoming call / message reminder for android
system?
1. Please make sure that the application work in the background,
as sometimes Android system hamper app working, that’s why
Bluetooth connection icon is missing from your smartwatch
screen. Please also check if the notification alert is turned ON
under your application settings.
2. In case of no message reminder, please reconnect the
smartwatch after resetting and turn on the "RS Motive" app again.
18
Shall the Bluetooth be connected all the time? Will data in the
device be saved when the Bluetooth is disconnected?
Before synchronizing data, the activity and sleep data will be
saved in the smartwatch. When the smartwatch is connected to
the "RS Motive" app, the data will be uploaded to the app history
automatically.
Note: The Bluetooth connection is mandatory for receiving
incoming calls and messages alert.
We, at Riversong, take our social responsibility seriously and are
committed to the cause of saving our environment. It is in keeping
with these commitments that we are proud to state that Riversong
smartwatch has got RoHS and CE certification.
Please clean the smartwatch with clean wet wiper regularly.
The smartwatch is waterresistant for daily use. Please avoid
wearing it for swimming, showering, having a sauna or steam.
Do not attempt to disassemble your product.
Do not expose the device to extremely high or low temperature.
The operating temperature is from 14°F to 122°F (10°C to 50°C).
19
CE RoHS DECLARATION
SAFETY NOTICE
Case material: Metal (with 2.5D curved glass)
Screen: 1.33" TFT color display
Button: Single touch button
Waterproof certification: IP67
Battery: 180mAh
Charging requirement: 5V 1A
Charging time: about 2h
Battery life: 710 days
Standby time: 25 days
Please check our website for more information:
www.riversongtech.com
20
SPECIFICATION
背 面
MEASURE BP
Tap and hold touch button for 3
seconds to measure your Blood
Pressure, you can also check your
Blood Pressure via the “RS Motive”
app. (Figure L)
Note :
1. Remove the protective film from the Blood Pressure sensor
before usage
2. Ensure you have worn your smartwatch correctly while
measuring Blood Pressure.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Blood Pressure data is for reference only and it cannot be
counted as medical diagnose.
3. Historical Blood Pressure data will be cleared after reset or
removal of app from your mobile phone.
11
Figure L
SPO2
Tap and hold touch button for 3
seconds to measure your SPO2
(Oxygen monitoring), you can also
check your oxygen level via app.
(Figure M)
Note :
1. Remove protective film from sensor before usage.
Ensure you have worn your smartwatch correctly while measuring
oxygen level.
2. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
3. Oxygen monitoring data is for reference only and it cannot be
counted as medical diagnose.
4. Historical oxygen monitoring data will be cleared after reset or
removal of app from your mobile phone.
12
Figure M
MESSAGE
Tap and hold touch button for 3
seconds to check your messages.
WEATHER
In order to display the Weather on
your smartwatch, you need to
install first the “RS Motive” app,
and set up the location you
desired to get the weather from.
Please make sure to bind your "RS
Motive" app with your
smartwatch.
Note:
1. Latest 3 messages will
be stored in your watch
memory
2. To receive message
notification on your
smartwatch enable
notification function on
your application.
(Figure N)
13
Figure N
CAMERA
Tap and hold touch button for 3
seconds on the “Camera" page
to remotely access your mobile
phone camera.
Note: It is recommended to keep
your mobile phone unlocked
while using the function.
MUSIC
Tap and hold touch button for 3
seconds on the “Music" page to
control the music player of your
mobile phone remotely.
Note:
1.Some thirdparty music player may not be controlled by the
smartwatch.
2. It is highly recommended to use original music players for this
operation.
14
OTHER
When you are on the Other
interface on your smartwatch,
Press and hold touch button
for 3 seconds to enter other
interface.
Back: to get back in the previous screen
Switch Style: to customize the face smartwatch with preinstalled
configuration
Stopwatch: to activate the stopwatch
Mute: turn on/off the notifications vibration
Reset: reset all the data previously saved by the smartwatch
Power off: to power off the smartwatch
Brightness: to control the brightness of the smartwatch display
15
FAQ
Why the device can’t be detected while pairing with phone
Bluetooth?
1. Please make sure, mobile Bluetooth is activated meanwhile
check your mobile and watch should be in BT range.
2. While pairing, please make sure distance between mobile
phone and watch should not be more than 50cm.
Why Bluetooth can’t be connected occasionally?
Bluetooth function of some cell phones become abnormal
occasionally upon activation. Bluetooth can be start working
properly after restarting cell phone or Bluetooth.
For iOS system, why the smartwatch’s data can’t be synchronized
to the “RS Motive” app or there is no incoming calls and messages
reminder from the smartwatch after resetting or upgrading the
device firmware?
1. Please check your smartphone "Settings” > “Bluetooth” > “My
devices“ to confirm whether the Bluetooth function has been
connected to the smartwatch. If the Bluetooth is connected, click
on the icon , located next to "Connected", this in order to forget
this device, and to cancel system Bluetooth pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
1716
connected, click on the icon , located next to "Connected", this
in order to forget this device, and to cancel system Bluetooth
pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
2. Make sure that “SMS” and “Incoming call” reminder alert are
turned on in the "RS Motive" app.
Why there is no incoming call / message reminder for android
system?
1. Please make sure that the application work in the background,
as sometimes Android system hamper app working, that’s why
Bluetooth connection icon is missing from your smartwatch
screen. Please also check if the notification alert is turned ON
under your application settings.
2. In case of no message reminder, please reconnect the
smartwatch after resetting and turn on the "RS Motive" app again.
18
Shall the Bluetooth be connected all the time? Will data in the
device be saved when the Bluetooth is disconnected?
Before synchronizing data, the activity and sleep data will be
saved in the smartwatch. When the smartwatch is connected to
the "RS Motive" app, the data will be uploaded to the app history
automatically.
Note: The Bluetooth connection is mandatory for receiving
incoming calls and messages alert.
We, at Riversong, take our social responsibility seriously and are
committed to the cause of saving our environment. It is in keeping
with these commitments that we are proud to state that Riversong
smartwatch has got RoHS and CE certification.
Please clean the smartwatch with clean wet wiper regularly.
The smartwatch is waterresistant for daily use. Please avoid
wearing it for swimming, showering, having a sauna or steam.
Do not attempt to disassemble your product.
Do not expose the device to extremely high or low temperature.
The operating temperature is from 14°F to 122°F (10°C to 50°C).
19
CE RoHS DECLARATION
SAFETY NOTICE
Case material: Metal (with 2.5D curved glass)
Screen: 1.33" TFT color display
Button: Single touch button
Waterproof certification: IP67
Battery: 180mAh
Charging requirement: 5V 1A
Charging time: about 2h
Battery life: 710 days
Standby time: 25 days
Please check our website for more information:
www.riversongtech.com
20
SPECIFICATION
背 面
MEASURE BP
Tap and hold touch button for 3
seconds to measure your Blood
Pressure, you can also check your
Blood Pressure via the “RS Motive”
app. (Figure L)
Note :
1. Remove the protective film from the Blood Pressure sensor
before usage
2. Ensure you have worn your smartwatch correctly while
measuring Blood Pressure.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Blood Pressure data is for reference only and it cannot be
counted as medical diagnose.
3. Historical Blood Pressure data will be cleared after reset or
removal of app from your mobile phone.
11
Figure L
SPO2
Tap and hold touch button for 3
seconds to measure your SPO2
(Oxygen monitoring), you can also
check your oxygen level via app.
(Figure M)
Note :
1. Remove protective film from sensor before usage.
Ensure you have worn your smartwatch correctly while measuring
oxygen level.
2. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
3. Oxygen monitoring data is for reference only and it cannot be
counted as medical diagnose.
4. Historical oxygen monitoring data will be cleared after reset or
removal of app from your mobile phone.
12
Figure M
MESSAGE
Tap and hold touch button for 3
seconds to check your messages.
WEATHER
In order to display the Weather on
your smartwatch, you need to
install first the “RS Motive” app,
and set up the location you
desired to get the weather from.
Please make sure to bind your "RS
Motive" app with your
smartwatch.
Note:
1. Latest 3 messages will
be stored in your watch
memory
2. To receive message
notification on your
smartwatch enable
notification function on
your application.
(Figure N)
13
Figure N
CAMERA
Tap and hold touch button for 3
seconds on the “Camera" page
to remotely access your mobile
phone camera.
Note: It is recommended to keep
your mobile phone unlocked
while using the function.
MUSIC
Tap and hold touch button for 3
seconds on the “Music" page to
control the music player of your
mobile phone remotely.
Note:
1.Some thirdparty music player may not be controlled by the
smartwatch.
2. It is highly recommended to use original music players for this
operation.
14
OTHER
When you are on the Other
interface on your smartwatch,
Press and hold touch button
for 3 seconds to enter other
interface.
Back: to get back in the previous screen
Switch Style: to customize the face smartwatch with preinstalled
configuration
Stopwatch: to activate the stopwatch
Mute: turn on/off the notifications vibration
Reset: reset all the data previously saved by the smartwatch
Power off: to power off the smartwatch
Brightness: to control the brightness of the smartwatch display
15
FAQ
Why the device can’t be detected while pairing with phone
Bluetooth?
1. Please make sure, mobile Bluetooth is activated meanwhile
check your mobile and watch should be in BT range.
2. While pairing, please make sure distance between mobile
phone and watch should not be more than 50cm.
Why Bluetooth can’t be connected occasionally?
Bluetooth function of some cell phones become abnormal
occasionally upon activation. Bluetooth can be start working
properly after restarting cell phone or Bluetooth.
For iOS system, why the smartwatch’s data can’t be synchronized
to the “RS Motive” app or there is no incoming calls and messages
reminder from the smartwatch after resetting or upgrading the
device firmware?
1. Please check your smartphone "Settings” > “Bluetooth” > “My
devices“ to confirm whether the Bluetooth function has been
connected to the smartwatch. If the Bluetooth is connected, click
on the icon , located next to "Connected", this in order to forget
this device, and to cancel system Bluetooth pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
1716
connected, click on the icon , located next to "Connected", this
in order to forget this device, and to cancel system Bluetooth
pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
2. Make sure that “SMS” and “Incoming call” reminder alert are
turned on in the "RS Motive" app.
Why there is no incoming call / message reminder for android
system?
1. Please make sure that the application work in the background,
as sometimes Android system hamper app working, that’s why
Bluetooth connection icon is missing from your smartwatch
screen. Please also check if the notification alert is turned ON
under your application settings.
2. In case of no message reminder, please reconnect the
smartwatch after resetting and turn on the "RS Motive" app again.
18
Shall the Bluetooth be connected all the time? Will data in the
device be saved when the Bluetooth is disconnected?
Before synchronizing data, the activity and sleep data will be
saved in the smartwatch. When the smartwatch is connected to
the "RS Motive" app, the data will be uploaded to the app history
automatically.
Note: The Bluetooth connection is mandatory for receiving
incoming calls and messages alert.
We, at Riversong, take our social responsibility seriously and are
committed to the cause of saving our environment. It is in keeping
with these commitments that we are proud to state that Riversong
smartwatch has got RoHS and CE certification.
Please clean the smartwatch with clean wet wiper regularly.
The smartwatch is waterresistant for daily use. Please avoid
wearing it for swimming, showering, having a sauna or steam.
Do not attempt to disassemble your product.
Do not expose the device to extremely high or low temperature.
The operating temperature is from 14°F to 122°F (10°C to 50°C).
19
CE RoHS DECLARATION
SAFETY NOTICE
Case material: Metal (with 2.5D curved glass)
Screen: 1.33" TFT color display
Button: Single touch button
Waterproof certification: IP67
Battery: 180mAh
Charging requirement: 5V 1A
Charging time: about 2h
Battery life: 710 days
Standby time: 25 days
Please check our website for more information:
www.riversongtech.com
20
SPECIFICATION
背 面
MEASURE BP
Tap and hold touch button for 3
seconds to measure your Blood
Pressure, you can also check your
Blood Pressure via the “RS Motive”
app. (Figure L)
Note :
1. Remove the protective film from the Blood Pressure sensor
before usage
2. Ensure you have worn your smartwatch correctly while
measuring Blood Pressure.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Blood Pressure data is for reference only and it cannot be
counted as medical diagnose.
3. Historical Blood Pressure data will be cleared after reset or
removal of app from your mobile phone.
11
Figure L
SPO2
Tap and hold touch button for 3
seconds to measure your SPO2
(Oxygen monitoring), you can also
check your oxygen level via app.
(Figure M)
Note :
1. Remove protective film from sensor before usage.
Ensure you have worn your smartwatch correctly while measuring
oxygen level.
2. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
3. Oxygen monitoring data is for reference only and it cannot be
counted as medical diagnose.
4. Historical oxygen monitoring data will be cleared after reset or
removal of app from your mobile phone.
12
Figure M
MESSAGE
Tap and hold touch button for 3
seconds to check your messages.
WEATHER
In order to display the Weather on
your smartwatch, you need to
install first the “RS Motive” app,
and set up the location you
desired to get the weather from.
Please make sure to bind your "RS
Motive" app with your
smartwatch.
Note:
1. Latest 3 messages will
be stored in your watch
memory
2. To receive message
notification on your
smartwatch enable
notification function on
your application.
(Figure N)
13
Figure N
CAMERA
Tap and hold touch button for 3
seconds on the “Camera" page
to remotely access your mobile
phone camera.
Note: It is recommended to keep
your mobile phone unlocked
while using the function.
MUSIC
Tap and hold touch button for 3
seconds on the “Music" page to
control the music player of your
mobile phone remotely.
Note:
1.Some thirdparty music player may not be controlled by the
smartwatch.
2. It is highly recommended to use original music players for this
operation.
14
OTHER
When you are on the Other
interface on your smartwatch,
Press and hold touch button
for 3 seconds to enter other
interface.
Back: to get back in the previous screen
Switch Style: to customize the face smartwatch with preinstalled
configuration
Stopwatch: to activate the stopwatch
Mute: turn on/off the notifications vibration
Reset: reset all the data previously saved by the smartwatch
Power off: to power off the smartwatch
Brightness: to control the brightness of the smartwatch display
15
FAQ
Why the device can’t be detected while pairing with phone
Bluetooth?
1. Please make sure, mobile Bluetooth is activated meanwhile
check your mobile and watch should be in BT range.
2. While pairing, please make sure distance between mobile
phone and watch should not be more than 50cm.
Why Bluetooth can’t be connected occasionally?
Bluetooth function of some cell phones become abnormal
occasionally upon activation. Bluetooth can be start working
properly after restarting cell phone or Bluetooth.
For iOS system, why the smartwatch’s data can’t be synchronized
to the “RS Motive” app or there is no incoming calls and messages
reminder from the smartwatch after resetting or upgrading the
device firmware?
1. Please check your smartphone "Settings” > “Bluetooth” > “My
devices“ to confirm whether the Bluetooth function has been
connected to the smartwatch. If the Bluetooth is connected, click
on the icon , located next to "Connected", this in order to forget
this device, and to cancel system Bluetooth pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
1716
connected, click on the icon , located next to "Connected", this
in order to forget this device, and to cancel system Bluetooth
pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
2. Make sure that “SMS” and “Incoming call” reminder alert are
turned on in the "RS Motive" app.
Why there is no incoming call / message reminder for android
system?
1. Please make sure that the application work in the background,
as sometimes Android system hamper app working, that’s why
Bluetooth connection icon is missing from your smartwatch
screen. Please also check if the notification alert is turned ON
under your application settings.
2. In case of no message reminder, please reconnect the
smartwatch after resetting and turn on the "RS Motive" app again.
18
Shall the Bluetooth be connected all the time? Will data in the
device be saved when the Bluetooth is disconnected?
Before synchronizing data, the activity and sleep data will be
saved in the smartwatch. When the smartwatch is connected to
the "RS Motive" app, the data will be uploaded to the app history
automatically.
Note: The Bluetooth connection is mandatory for receiving
incoming calls and messages alert.
We, at Riversong, take our social responsibility seriously and are
committed to the cause of saving our environment. It is in keeping
with these commitments that we are proud to state that Riversong
smartwatch has got RoHS and CE certification.
Please clean the smartwatch with clean wet wiper regularly.
The smartwatch is waterresistant for daily use. Please avoid
wearing it for swimming, showering, having a sauna or steam.
Do not attempt to disassemble your product.
Do not expose the device to extremely high or low temperature.
The operating temperature is from 14°F to 122°F (10°C to 50°C).
19
CE RoHS DECLARATION
SAFETY NOTICE
Case material: Metal (with 2.5D curved glass)
Screen: 1.33" TFT color display
Button: Single touch button
Waterproof certification: IP67
Battery: 180mAh
Charging requirement: 5V 1A
Charging time: about 2h
Battery life: 710 days
Standby time: 25 days
Please check our website for more information:
www.riversongtech.com
20
SPECIFICATION
背 面
MEASURE BP
Tap and hold touch button for 3
seconds to measure your Blood
Pressure, you can also check your
Blood Pressure via the “RS Motive”
app. (Figure L)
Note :
1. Remove the protective film from the Blood Pressure sensor
before usage
2. Ensure you have worn your smartwatch correctly while
measuring Blood Pressure.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Blood Pressure data is for reference only and it cannot be
counted as medical diagnose.
3. Historical Blood Pressure data will be cleared after reset or
removal of app from your mobile phone.
11
Figure L
SPO2
Tap and hold touch button for 3
seconds to measure your SPO2
(Oxygen monitoring), you can also
check your oxygen level via app.
(Figure M)
Note :
1. Remove protective film from sensor before usage.
Ensure you have worn your smartwatch correctly while measuring
oxygen level.
2. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
3. Oxygen monitoring data is for reference only and it cannot be
counted as medical diagnose.
4. Historical oxygen monitoring data will be cleared after reset or
removal of app from your mobile phone.
12
Figure M
MESSAGE
Tap and hold touch button for 3
seconds to check your messages.
WEATHER
In order to display the Weather on
your smartwatch, you need to
install first the “RS Motive” app,
and set up the location you
desired to get the weather from.
Please make sure to bind your "RS
Motive" app with your
smartwatch.
Note:
1. Latest 3 messages will
be stored in your watch
memory
2. To receive message
notification on your
smartwatch enable
notification function on
your application.
(Figure N)
13
Figure N
CAMERA
Tap and hold touch button for 3
seconds on the “Camera" page
to remotely access your mobile
phone camera.
Note: It is recommended to keep
your mobile phone unlocked
while using the function.
MUSIC
Tap and hold touch button for 3
seconds on the “Music" page to
control the music player of your
mobile phone remotely.
Note:
1.Some thirdparty music player may not be controlled by the
smartwatch.
2. It is highly recommended to use original music players for this
operation.
14
OTHER
When you are on the Other
interface on your smartwatch,
Press and hold touch button
for 3 seconds to enter other
interface.
Back: to get back in the previous screen
Switch Style: to customize the face smartwatch with preinstalled
configuration
Stopwatch: to activate the stopwatch
Mute: turn on/off the notifications vibration
Reset: reset all the data previously saved by the smartwatch
Power off: to power off the smartwatch
Brightness: to control the brightness of the smartwatch display
15
FAQ
Why the device can’t be detected while pairing with phone
Bluetooth?
1. Please make sure, mobile Bluetooth is activated meanwhile
check your mobile and watch should be in BT range.
2. While pairing, please make sure distance between mobile
phone and watch should not be more than 50cm.
Why Bluetooth can’t be connected occasionally?
Bluetooth function of some cell phones become abnormal
occasionally upon activation. Bluetooth can be start working
properly after restarting cell phone or Bluetooth.
For iOS system, why the smartwatch’s data can’t be synchronized
to the “RS Motive” app or there is no incoming calls and messages
reminder from the smartwatch after resetting or upgrading the
device firmware?
1. Please check your smartphone "Settings” > “Bluetooth” > “My
devices“ to confirm whether the Bluetooth function has been
connected to the smartwatch. If the Bluetooth is connected, click
on the icon , located next to "Connected", this in order to forget
this device, and to cancel system Bluetooth pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
1716
connected, click on the icon , located next to "Connected", this
in order to forget this device, and to cancel system Bluetooth
pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
2. Make sure that “SMS” and “Incoming call” reminder alert are
turned on in the "RS Motive" app.
Why there is no incoming call / message reminder for android
system?
1. Please make sure that the application work in the background,
as sometimes Android system hamper app working, that’s why
Bluetooth connection icon is missing from your smartwatch
screen. Please also check if the notification alert is turned ON
under your application settings.
2. In case of no message reminder, please reconnect the
smartwatch after resetting and turn on the "RS Motive" app again.
18
Shall the Bluetooth be connected all the time? Will data in the
device be saved when the Bluetooth is disconnected?
Before synchronizing data, the activity and sleep data will be
saved in the smartwatch. When the smartwatch is connected to
the "RS Motive" app, the data will be uploaded to the app history
automatically.
Note: The Bluetooth connection is mandatory for receiving
incoming calls and messages alert.
We, at Riversong, take our social responsibility seriously and are
committed to the cause of saving our environment. It is in keeping
with these commitments that we are proud to state that Riversong
smartwatch has got RoHS and CE certification.
Please clean the smartwatch with clean wet wiper regularly.
The smartwatch is waterresistant for daily use. Please avoid
wearing it for swimming, showering, having a sauna or steam.
Do not attempt to disassemble your product.
Do not expose the device to extremely high or low temperature.
The operating temperature is from 14°F to 122°F (10°C to 50°C).
19
CE RoHS DECLARATION
SAFETY NOTICE
Case material: Metal (with 2.5D curved glass)
Screen: 1.33" TFT color display
Button: Single touch button
Waterproof certification: IP67
Battery: 180mAh
Charging requirement: 5V 1A
Charging time: about 2h
Battery life: 710 days
Standby time: 25 days
Please check our website for more information:
www.riversongtech.com
20
SPECIFICATION
背 面
MEASURE BP
Tap and hold touch button for 3
seconds to measure your Blood
Pressure, you can also check your
Blood Pressure via the “RS Motive”
app. (Figure L)
Note :
1. Remove the protective film from the Blood Pressure sensor
before usage
2. Ensure you have worn your smartwatch correctly while
measuring Blood Pressure.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Blood Pressure data is for reference only and it cannot be
counted as medical diagnose.
3. Historical Blood Pressure data will be cleared after reset or
removal of app from your mobile phone.
11
Figure L
SPO2
Tap and hold touch button for 3
seconds to measure your SPO2
(Oxygen monitoring), you can also
check your oxygen level via app.
(Figure M)
Note :
1. Remove protective film from sensor before usage.
Ensure you have worn your smartwatch correctly while measuring
oxygen level.
2. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
3. Oxygen monitoring data is for reference only and it cannot be
counted as medical diagnose.
4. Historical oxygen monitoring data will be cleared after reset or
removal of app from your mobile phone.
12
Figure M
MESSAGE
Tap and hold touch button for 3
seconds to check your messages.
WEATHER
In order to display the Weather on
your smartwatch, you need to
install first the “RS Motive” app,
and set up the location you
desired to get the weather from.
Please make sure to bind your "RS
Motive" app with your
smartwatch.
Note:
1. Latest 3 messages will
be stored in your watch
memory
2. To receive message
notification on your
smartwatch enable
notification function on
your application.
(Figure N)
13
Figure N
CAMERA
Tap and hold touch button for 3
seconds on the “Camera" page
to remotely access your mobile
phone camera.
Note: It is recommended to keep
your mobile phone unlocked
while using the function.
MUSIC
Tap and hold touch button for 3
seconds on the “Music" page to
control the music player of your
mobile phone remotely.
Note:
1.Some thirdparty music player may not be controlled by the
smartwatch.
2. It is highly recommended to use original music players for this
operation.
14
OTHER
When you are on the Other
interface on your smartwatch,
Press and hold touch button
for 3 seconds to enter other
interface.
Back: to get back in the previous screen
Switch Style: to customize the face smartwatch with preinstalled
configuration
Stopwatch: to activate the stopwatch
Mute: turn on/off the notifications vibration
Reset: reset all the data previously saved by the smartwatch
Power off: to power off the smartwatch
Brightness: to control the brightness of the smartwatch display
15
FAQ
Why the device can’t be detected while pairing with phone
Bluetooth?
1. Please make sure, mobile Bluetooth is activated meanwhile
check your mobile and watch should be in BT range.
2. While pairing, please make sure distance between mobile
phone and watch should not be more than 50cm.
Why Bluetooth can’t be connected occasionally?
Bluetooth function of some cell phones become abnormal
occasionally upon activation. Bluetooth can be start working
properly after restarting cell phone or Bluetooth.
For iOS system, why the smartwatch’s data can’t be synchronized
to the “RS Motive” app or there is no incoming calls and messages
reminder from the smartwatch after resetting or upgrading the
device firmware?
1. Please check your smartphone "Settings” > “Bluetooth” > “My
devices“ to confirm whether the Bluetooth function has been
connected to the smartwatch. If the Bluetooth is connected, click
on the icon , located next to "Connected", this in order to forget
this device, and to cancel system Bluetooth pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
1716
connected, click on the icon , located next to "Connected", this
in order to forget this device, and to cancel system Bluetooth
pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
2. Make sure that “SMS” and “Incoming call” reminder alert are
turned on in the "RS Motive" app.
Why there is no incoming call / message reminder for android
system?
1. Please make sure that the application work in the background,
as sometimes Android system hamper app working, that’s why
Bluetooth connection icon is missing from your smartwatch
screen. Please also check if the notification alert is turned ON
under your application settings.
2. In case of no message reminder, please reconnect the
smartwatch after resetting and turn on the "RS Motive" app again.
18
Shall the Bluetooth be connected all the time? Will data in the
device be saved when the Bluetooth is disconnected?
Before synchronizing data, the activity and sleep data will be
saved in the smartwatch. When the smartwatch is connected to
the "RS Motive" app, the data will be uploaded to the app history
automatically.
Note: The Bluetooth connection is mandatory for receiving
incoming calls and messages alert.
We, at Riversong, take our social responsibility seriously and are
committed to the cause of saving our environment. It is in keeping
with these commitments that we are proud to state that Riversong
smartwatch has got RoHS and CE certification.
Please clean the smartwatch with clean wet wiper regularly.
The smartwatch is waterresistant for daily use. Please avoid
wearing it for swimming, showering, having a sauna or steam.
Do not attempt to disassemble your product.
Do not expose the device to extremely high or low temperature.
The operating temperature is from 14°F to 122°F (10°C to 50°C).
19
CE RoHS DECLARATION
SAFETY NOTICE
Case material: Metal (with 2.5D curved glass)
Screen: 1.33" TFT color display
Button: Single touch button
Waterproof certification: IP67
Battery: 180mAh
Charging requirement: 5V 1A
Charging time: about 2h
Battery life: 710 days
Standby time: 25 days
Please check our website for more information:
www.riversongtech.com
20
SPECIFICATION
背 面
MEASURE BP
Tap and hold touch button for 3
seconds to measure your Blood
Pressure, you can also check your
Blood Pressure via the “RS Motive”
app. (Figure L)
Note :
1. Remove the protective film from the Blood Pressure sensor
before usage
2. Ensure you have worn your smartwatch correctly while
measuring Blood Pressure.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Blood Pressure data is for reference only and it cannot be
counted as medical diagnose.
3. Historical Blood Pressure data will be cleared after reset or
removal of app from your mobile phone.
11
Figure L
SPO2
Tap and hold touch button for 3
seconds to measure your SPO2
(Oxygen monitoring), you can also
check your oxygen level via app.
(Figure M)
Note :
1. Remove protective film from sensor before usage.
Ensure you have worn your smartwatch correctly while measuring
oxygen level.
2. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
3. Oxygen monitoring data is for reference only and it cannot be
counted as medical diagnose.
4. Historical oxygen monitoring data will be cleared after reset or
removal of app from your mobile phone.
12
Figure M
MESSAGE
Tap and hold touch button for 3
seconds to check your messages.
WEATHER
In order to display the Weather on
your smartwatch, you need to
install first the “RS Motive” app,
and set up the location you
desired to get the weather from.
Please make sure to bind your "RS
Motive" app with your
smartwatch.
Note:
1. Latest 3 messages will
be stored in your watch
memory
2. To receive message
notification on your
smartwatch enable
notification function on
your application.
(Figure N)
13
Figure N
CAMERA
Tap and hold touch button for 3
seconds on the “Camera" page
to remotely access your mobile
phone camera.
Note: It is recommended to keep
your mobile phone unlocked
while using the function.
MUSIC
Tap and hold touch button for 3
seconds on the “Music" page to
control the music player of your
mobile phone remotely.
Note:
1.Some thirdparty music player may not be controlled by the
smartwatch.
2. It is highly recommended to use original music players for this
operation.
14
OTHER
When you are on the Other
interface on your smartwatch,
Press and hold touch button
for 3 seconds to enter other
interface.
Back: to get back in the previous screen
Switch Style: to customize the face smartwatch with preinstalled
configuration
Stopwatch: to activate the stopwatch
Mute: turn on/off the notifications vibration
Reset: reset all the data previously saved by the smartwatch
Power off: to power off the smartwatch
Brightness: to control the brightness of the smartwatch display
15
FAQ
Why the device can’t be detected while pairing with phone
Bluetooth?
1. Please make sure, mobile Bluetooth is activated meanwhile
check your mobile and watch should be in BT range.
2. While pairing, please make sure distance between mobile
phone and watch should not be more than 50cm.
Why Bluetooth can’t be connected occasionally?
Bluetooth function of some cell phones become abnormal
occasionally upon activation. Bluetooth can be start working
properly after restarting cell phone or Bluetooth.
For iOS system, why the smartwatch’s data can’t be synchronized
to the “RS Motive” app or there is no incoming calls and messages
reminder from the smartwatch after resetting or upgrading the
device firmware?
1. Please check your smartphone "Settings” > “Bluetooth” > “My
devices“ to confirm whether the Bluetooth function has been
connected to the smartwatch. If the Bluetooth is connected, click
on the icon , located next to "Connected", this in order to forget
this device, and to cancel system Bluetooth pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
1716
connected, click on the icon , located next to "Connected", this
in order to forget this device, and to cancel system Bluetooth
pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
2. Make sure that “SMS” and “Incoming call” reminder alert are
turned on in the "RS Motive" app.
Why there is no incoming call / message reminder for android
system?
1. Please make sure that the application work in the background,
as sometimes Android system hamper app working, that’s why
Bluetooth connection icon is missing from your smartwatch
screen. Please also check if the notification alert is turned ON
under your application settings.
2. In case of no message reminder, please reconnect the
smartwatch after resetting and turn on the "RS Motive" app again.
18
Shall the Bluetooth be connected all the time? Will data in the
device be saved when the Bluetooth is disconnected?
Before synchronizing data, the activity and sleep data will be
saved in the smartwatch. When the smartwatch is connected to
the "RS Motive" app, the data will be uploaded to the app history
automatically.
Note: The Bluetooth connection is mandatory for receiving
incoming calls and messages alert.
We, at Riversong, take our social responsibility seriously and are
committed to the cause of saving our environment. It is in keeping
with these commitments that we are proud to state that Riversong
smartwatch has got RoHS and CE certification.
Please clean the smartwatch with clean wet wiper regularly.
The smartwatch is waterresistant for daily use. Please avoid
wearing it for swimming, showering, having a sauna or steam.
Do not attempt to disassemble your product.
Do not expose the device to extremely high or low temperature.
The operating temperature is from 14°F to 122°F (10°C to 50°C).
19
CE RoHS DECLARATION
SAFETY NOTICE
Case material: Metal (with 2.5D curved glass)
Screen: 1.33" TFT color display
Button: Single touch button
Waterproof certification: IP67
Battery: 180mAh
Charging requirement: 5V 1A
Charging time: about 2h
Battery life: 710 days
Standby time: 25 days
Please check our website for more information:
www.riversongtech.com
20
SPECIFICATION
背 面
MEASURE BP
Tap and hold touch button for 3
seconds to measure your Blood
Pressure, you can also check your
Blood Pressure via the “RS Motive”
app. (Figure L)
Note :
1. Remove the protective film from the Blood Pressure sensor
before usage
2. Ensure you have worn your smartwatch correctly while
measuring Blood Pressure.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Blood Pressure data is for reference only and it cannot be
counted as medical diagnose.
3. Historical Blood Pressure data will be cleared after reset or
removal of app from your mobile phone.
11
Figure L
SPO2
Tap and hold touch button for 3
seconds to measure your SPO2
(Oxygen monitoring), you can also
check your oxygen level via app.
(Figure M)
Note :
1. Remove protective film from sensor before usage.
Ensure you have worn your smartwatch correctly while measuring
oxygen level.
2. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
3. Oxygen monitoring data is for reference only and it cannot be
counted as medical diagnose.
4. Historical oxygen monitoring data will be cleared after reset or
removal of app from your mobile phone.
12
Figure M
MESSAGE
Tap and hold touch button for 3
seconds to check your messages.
WEATHER
In order to display the Weather on
your smartwatch, you need to
install first the “RS Motive” app,
and set up the location you
desired to get the weather from.
Please make sure to bind your "RS
Motive" app with your
smartwatch.
Note:
1. Latest 3 messages will
be stored in your watch
memory
2. To receive message
notification on your
smartwatch enable
notification function on
your application.
(Figure N)
13
Figure N
CAMERA
Tap and hold touch button for 3
seconds on the “Camera" page
to remotely access your mobile
phone camera.
Note: It is recommended to keep
your mobile phone unlocked
while using the function.
MUSIC
Tap and hold touch button for 3
seconds on the “Music" page to
control the music player of your
mobile phone remotely.
Note:
1.Some thirdparty music player may not be controlled by the
smartwatch.
2. It is highly recommended to use original music players for this
operation.
14
OTHER
When you are on the Other
interface on your smartwatch,
Press and hold touch button
for 3 seconds to enter other
interface.
Back: to get back in the previous screen
Switch Style: to customize the face smartwatch with preinstalled
configuration
Stopwatch: to activate the stopwatch
Mute: turn on/off the notifications vibration
Reset: reset all the data previously saved by the smartwatch
Power off: to power off the smartwatch
Brightness: to control the brightness of the smartwatch display
15
FAQ
Why the device can’t be detected while pairing with phone
Bluetooth?
1. Please make sure, mobile Bluetooth is activated meanwhile
check your mobile and watch should be in BT range.
2. While pairing, please make sure distance between mobile
phone and watch should not be more than 50cm.
Why Bluetooth can’t be connected occasionally?
Bluetooth function of some cell phones become abnormal
occasionally upon activation. Bluetooth can be start working
properly after restarting cell phone or Bluetooth.
For iOS system, why the smartwatch’s data can’t be synchronized
to the “RS Motive” app or there is no incoming calls and messages
reminder from the smartwatch after resetting or upgrading the
device firmware?
1. Please check your smartphone "Settings” > “Bluetooth” > “My
devices“ to confirm whether the Bluetooth function has been
connected to the smartwatch. If the Bluetooth is connected, click
on the icon , located next to "Connected", this in order to forget
this device, and to cancel system Bluetooth pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
1716
connected, click on the icon , located next to "Connected", this
in order to forget this device, and to cancel system Bluetooth
pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
2. Make sure that “SMS” and “Incoming call” reminder alert are
turned on in the "RS Motive" app.
Why there is no incoming call / message reminder for android
system?
1. Please make sure that the application work in the background,
as sometimes Android system hamper app working, that’s why
Bluetooth connection icon is missing from your smartwatch
screen. Please also check if the notification alert is turned ON
under your application settings.
2. In case of no message reminder, please reconnect the
smartwatch after resetting and turn on the "RS Motive" app again.
18
Shall the Bluetooth be connected all the time? Will data in the
device be saved when the Bluetooth is disconnected?
Before synchronizing data, the activity and sleep data will be
saved in the smartwatch. When the smartwatch is connected to
the "RS Motive" app, the data will be uploaded to the app history
automatically.
Note: The Bluetooth connection is mandatory for receiving
incoming calls and messages alert.
We, at Riversong, take our social responsibility seriously and are
committed to the cause of saving our environment. It is in keeping
with these commitments that we are proud to state that Riversong
smartwatch has got RoHS and CE certification.
Please clean the smartwatch with clean wet wiper regularly.
The smartwatch is waterresistant for daily use. Please avoid
wearing it for swimming, showering, having a sauna or steam.
Do not attempt to disassemble your product.
Do not expose the device to extremely high or low temperature.
The operating temperature is from 14°F to 122°F (10°C to 50°C).
19
CE RoHS DECLARATION
SAFETY NOTICE
Case material: Metal (with 2.5D curved glass)
Screen: 1.33" TFT color display
Button: Single touch button
Waterproof certification: IP67
Battery: 180mAh
Charging requirement: 5V 1A
Charging time: about 2h
Battery life: 710 days
Standby time: 25 days
Please check our website for more information:
www.riversongtech.com
20
SPECIFICATION
背 面
MEASURE BP
Tap and hold touch button for 3
seconds to measure your Blood
Pressure, you can also check your
Blood Pressure via the “RS Motive”
app. (Figure L)
Note :
1. Remove the protective film from the Blood Pressure sensor
before usage
2. Ensure you have worn your smartwatch correctly while
measuring Blood Pressure.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Blood Pressure data is for reference only and it cannot be
counted as medical diagnose.
3. Historical Blood Pressure data will be cleared after reset or
removal of app from your mobile phone.
11
Figure L
SPO2
Tap and hold touch button for 3
seconds to measure your SPO2
(Oxygen monitoring), you can also
check your oxygen level via app.
(Figure M)
Note :
1. Remove protective film from sensor before usage.
Ensure you have worn your smartwatch correctly while measuring
oxygen level.
2. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
3. Oxygen monitoring data is for reference only and it cannot be
counted as medical diagnose.
4. Historical oxygen monitoring data will be cleared after reset or
removal of app from your mobile phone.
12
Figure M
MESSAGE
Tap and hold touch button for 3
seconds to check your messages.
WEATHER
In order to display the Weather on
your smartwatch, you need to
install first the “RS Motive” app,
and set up the location you
desired to get the weather from.
Please make sure to bind your "RS
Motive" app with your
smartwatch.
Note:
1. Latest 3 messages will
be stored in your watch
memory
2. To receive message
notification on your
smartwatch enable
notification function on
your application.
(Figure N)
13
Figure N
CAMERA
Tap and hold touch button for 3
seconds on the “Camera" page
to remotely access your mobile
phone camera.
Note: It is recommended to keep
your mobile phone unlocked
while using the function.
MUSIC
Tap and hold touch button for 3
seconds on the “Music" page to
control the music player of your
mobile phone remotely.
Note:
1.Some thirdparty music player may not be controlled by the
smartwatch.
2. It is highly recommended to use original music players for this
operation.
14
OTHER
When you are on the Other
interface on your smartwatch,
Press and hold touch button
for 3 seconds to enter other
interface.
Back: to get back in the previous screen
Switch Style: to customize the face smartwatch with preinstalled
configuration
Stopwatch: to activate the stopwatch
Mute: turn on/off the notifications vibration
Reset: reset all the data previously saved by the smartwatch
Power off: to power off the smartwatch
Brightness: to control the brightness of the smartwatch display
15
FAQ
Why the device can’t be detected while pairing with phone
Bluetooth?
1. Please make sure, mobile Bluetooth is activated meanwhile
check your mobile and watch should be in BT range.
2. While pairing, please make sure distance between mobile
phone and watch should not be more than 50cm.
Why Bluetooth can’t be connected occasionally?
Bluetooth function of some cell phones become abnormal
occasionally upon activation. Bluetooth can be start working
properly after restarting cell phone or Bluetooth.
For iOS system, why the smartwatch’s data can’t be synchronized
to the “RS Motive” app or there is no incoming calls and messages
reminder from the smartwatch after resetting or upgrading the
device firmware?
1. Please check your smartphone "Settings” > “Bluetooth” > “My
devices“ to confirm whether the Bluetooth function has been
connected to the smartwatch. If the Bluetooth is connected, click
on the icon , located next to "Connected", this in order to forget
this device, and to cancel system Bluetooth pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
1716
connected, click on the icon , located next to "Connected", this
in order to forget this device, and to cancel system Bluetooth
pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
2. Make sure that “SMS” and “Incoming call” reminder alert are
turned on in the "RS Motive" app.
Why there is no incoming call / message reminder for android
system?
1. Please make sure that the application work in the background,
as sometimes Android system hamper app working, that’s why
Bluetooth connection icon is missing from your smartwatch
screen. Please also check if the notification alert is turned ON
under your application settings.
2. In case of no message reminder, please reconnect the
smartwatch after resetting and turn on the "RS Motive" app again.
18
Shall the Bluetooth be connected all the time? Will data in the
device be saved when the Bluetooth is disconnected?
Before synchronizing data, the activity and sleep data will be
saved in the smartwatch. When the smartwatch is connected to
the "RS Motive" app, the data will be uploaded to the app history
automatically.
Note: The Bluetooth connection is mandatory for receiving
incoming calls and messages alert.
We, at Riversong, take our social responsibility seriously and are
committed to the cause of saving our environment. It is in keeping
with these commitments that we are proud to state that Riversong
smartwatch has got RoHS and CE certification.
Please clean the smartwatch with clean wet wiper regularly.
The smartwatch is waterresistant for daily use. Please avoid
wearing it for swimming, showering, having a sauna or steam.
Do not attempt to disassemble your product.
Do not expose the device to extremely high or low temperature.
The operating temperature is from 14°F to 122°F (10°C to 50°C).
19
CE RoHS DECLARATION
SAFETY NOTICE
Case material: Metal (with 2.5D curved glass)
Screen: 1.33" TFT color display
Button: Single touch button
Waterproof certification: IP67
Battery: 180mAh
Charging requirement: 5V 1A
Charging time: about 2h
Battery life: 710 days
Standby time: 25 days
Please check our website for more information:
www.riversongtech.com
20
SPECIFICATION
背 面
MEASURE BP
Tap and hold touch button for 3
seconds to measure your Blood
Pressure, you can also check your
Blood Pressure via the “RS Motive”
app. (Figure L)
Note :
1. Remove the protective film from the Blood Pressure sensor
before usage
2. Ensure you have worn your smartwatch correctly while
measuring Blood Pressure.
3. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
4. Blood Pressure data is for reference only and it cannot be
counted as medical diagnose.
3. Historical Blood Pressure data will be cleared after reset or
removal of app from your mobile phone.
11
Figure L
SPO2
Tap and hold touch button for 3
seconds to measure your SPO2
(Oxygen monitoring), you can also
check your oxygen level via app.
(Figure M)
Note :
1. Remove protective film from sensor before usage.
Ensure you have worn your smartwatch correctly while measuring
oxygen level.
2. The data might be inaccurate for the first time as the system
needs some time around 2448 hours to build your personal data
model. Result will be more accurate later.
3. Oxygen monitoring data is for reference only and it cannot be
counted as medical diagnose.
4. Historical oxygen monitoring data will be cleared after reset or
removal of app from your mobile phone.
12
Figure M
MESSAGE
Tap and hold touch button for 3
seconds to check your messages.
WEATHER
In order to display the Weather on
your smartwatch, you need to
install first the “RS Motive” app,
and set up the location you
desired to get the weather from.
Please make sure to bind your "RS
Motive" app with your
smartwatch.
Note:
1. Latest 3 messages will
be stored in your watch
memory
2. To receive message
notification on your
smartwatch enable
notification function on
your application.
(Figure N)
13
Figure N
CAMERA
Tap and hold touch button for 3
seconds on the “Camera" page
to remotely access your mobile
phone camera.
Note: It is recommended to keep
your mobile phone unlocked
while using the function.
MUSIC
Tap and hold touch button for 3
seconds on the “Music" page to
control the music player of your
mobile phone remotely.
Note:
1.Some thirdparty music player may not be controlled by the
smartwatch.
2. It is highly recommended to use original music players for this
operation.
14
OTHER
When you are on the Other
interface on your smartwatch,
Press and hold touch button
for 3 seconds to enter other
interface.
Back: to get back in the previous screen
Switch Style: to customize the face smartwatch with preinstalled
configuration
Stopwatch: to activate the stopwatch
Mute: turn on/off the notifications vibration
Reset: reset all the data previously saved by the smartwatch
Power off: to power off the smartwatch
Brightness: to control the brightness of the smartwatch display
15
FAQ
Why the device can’t be detected while pairing with phone
Bluetooth?
1. Please make sure, mobile Bluetooth is activated meanwhile
check your mobile and watch should be in BT range.
2. While pairing, please make sure distance between mobile
phone and watch should not be more than 50cm.
Why Bluetooth can’t be connected occasionally?
Bluetooth function of some cell phones become abnormal
occasionally upon activation. Bluetooth can be start working
properly after restarting cell phone or Bluetooth.
For iOS system, why the smartwatch’s data can’t be synchronized
to the “RS Motive” app or there is no incoming calls and messages
reminder from the smartwatch after resetting or upgrading the
device firmware?
1. Please check your smartphone "Settings” > “Bluetooth” > “My
devices“ to confirm whether the Bluetooth function has been
connected to the smartwatch. If the Bluetooth is connected, click
on the icon , located next to "Connected", this in order to forget
this device, and to cancel system Bluetooth pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
1716
connected, click on the icon , located next to "Connected", this
in order to forget this device, and to cancel system Bluetooth
pairing immediately.
Open your "RS Motive" app, and search for the smartwatch again.
Once found, connect the smartwatch and click on "Pair" from the
popup pairing prompt dialog box.
2. Make sure that “SMS” and “Incoming call” reminder alert are
turned on in the "RS Motive" app.
Why there is no incoming call / message reminder for android
system?
1. Please make sure that the application work in the background,
as sometimes Android system hamper app working, that’s why
Bluetooth connection icon is missing from your smartwatch
screen. Please also check if the notification alert is turned ON
under your application settings.
2. In case of no message reminder, please reconnect the
smartwatch after resetting and turn on the "RS Motive" app again.
18
Shall the Bluetooth be connected all the time? Will data in the
device be saved when the Bluetooth is disconnected?
Before synchronizing data, the activity and sleep data will be
saved in the smartwatch. When the smartwatch is connected to
the "RS Motive" app, the data will be uploaded to the app history
automatically.
Note: The Bluetooth connection is mandatory for receiving
incoming calls and messages alert.
We, at Riversong, take our social responsibility seriously and are
committed to the cause of saving our environment. It is in keeping
with these commitments that we are proud to state that Riversong
smartwatch has got RoHS and CE certification.
Please clean the smartwatch with clean wet wiper regularly.
The smartwatch is waterresistant for daily use. Please avoid
wearing it for swimming, showering, having a sauna or steam.
Do not attempt to disassemble your product.
Do not expose the device to extremely high or low temperature.
The operating temperature is from 14°F to 122°F (10°C to 50°C).
19
CE RoHS DECLARATION
SAFETY NOTICE
Case material: Metal (with 2.5D curved glass)
Screen: 1.33" TFT color display
Button: Single touch button
Waterproof certification: IP67
Battery: 180mAh
Charging requirement: 5V 1A
Charging time: about 2h
Battery life: 710 days
Standby time: 25 days
Please check our website for more information:
www.riversongtech.com
20
SPECIFICATION
Table of contents
Other Riversong Watch manuals
