ROAMER TREKK MASTER User manual

I N S T R U C T I O N M A N UA L
I N T E R N AT I O N A L WA R R A N T Y
R OA M E R O F S W IT ZE R L A N D AG – G I B E LI N S TR A SS E 2 7
P. O . B O X – C H - 4 5 0 3 S O L O T H U R N
T E L + 4 1 3 2 6 2 5 5 1 1 1 – FA X + 41 3 2 6 2 2 09 0 3
W W W. R O A M E R .C H

Table of contents
General information....................................5
Functional overview...................................6
How to change mode................................7
Model overview.............................................8
Synchronizing hands...............................10
Low battery ................................................... 11
Water resistance .........................................12
Backlight..........................................................12
Settings ......................................13
Time-1.........................................14
Date ............................................15
Parameter ..................................16
Time-2.........................................17
Alarm ..........................................18
Chronograph .............................19
Thermometer.............................20
Barometer ..................................21
Compass .....................................22
Head setting .................................................23
Declination and calibration.................24
Altimeter....................................25
Interval setting............................................26
Altitude calibration...................................27
International Warranty ..........133
!"#$%&#&'
()%*!++
(,')-)
#,&'%)%&#&'
.!')%&#&'
"$/,#
!"!'%
!" #$ %&'( &$&)

Congratulations on the purchase of a Roamer TrekkMaster. Your TrekkMaster is a highly
advanced electronic device. Therefore we recommend that you carefully read the in-
structions before use to familiarize yourself with its functions. Please note that a piece
of precision electronics like the TrekkMaster will only work as it should if you know
how to use it. Improper use and maintenance of this device may void the warranty and
place you in unnecessary danger.
WARNING:
Please remember that you are always responsible for your own safety. The TrekkMaster in
no way reduces the need for the security precautions associated with your activities. Do not
use this device for activities which require professional or industrial measuring accuracy. Do
not use the TrekkMaster for measurements during the following types of sports: Skydiving,
hang-gliding, paragliding or ying with a gyrocopter, sailplane, motorized sport plane, etc.
Professional measuring devices are required for these activities.
General information
!"#$%&#&'
()%*!++
(,')-)
#,&'%)%&#&'
.!')%&#&'
"$/,#
!"!'%
5
!" #$ %&'( &$&)

N
S
EW
+
20°
-
4478m
A
C
B
Functional overview
Pusher A
Date
Pusher C
LCD Display
Pusher B
Light
Weather
Indicator
Sensor
Rotating
Bezel
Push C and move
between the modes
by pushing A(counter-
clockwise) or B(clock-
wise).
Conrm your selected
mode by pushing C
again (or wait for 30 sec).
Barometer
Altimeter Alarm
Chronometer
Compass
Time-1 Time-2
Thermometer How to change mode
76
!" #$ %&'( &$&)

Model overview Model overview
770990 40 05 07770990 40 55 07770990 41 55 07 770990 41 15 07770990 49 55 07770990 41 45 07
98
!" #$ %&'( &$&)

A
C
B
A
C
B
Synchronizing hands
Following a battery change, a violent impact or exposure to a strong magnetic eld,
hands may fail to revert to their original position. From each mode, push Cfor at least
3 sec. Use A(h) and B(min) to synchronize hands. Push Cto exit.
When Low Battery is detected, all functions are disabled and hands are placed at
12h00. If Alarm was ON it will not be disabled until it goes o.
Note: Backlight or running chrono in the background reduces battery life.
Low Battery
1110
!" #$ %&'( &$&)

Settings
To set Time-1, Date and parameters,
press at least 1 second on Bfrom Time-1
mode (or pull Cfrom each mode), hands
are placed at 10h10.
Push Bto jump between Time-1, Date
and parameters.
To edit one of them, push Ato conrm
mode and Aagain to adjust ashing
display then push Bto set and conrm
edited mode. To exit settings mode,
push Cfrom any step.
The TrekkMaster has an electro-
luminescent backlight which is
activated by pushing the «Light»
button. The backlight will remain
on for 5-seconds. Pressing the
«Light» button during this time
will restart the 5 second period,
continuing the backlight feature.
Water Resistance
This product is water resistant.
Water resistance is tested to 50m.
Make always sure that crown Cis
always in the pushed-in position
in order to ensure the water
resistance of the watch.
Backlight
A
C
B
1312
!" #$ %&'( &$&)

Date
To edit Date, push Ato conrm mode Date and Aagain to adjust ashing display then
push Bto set and conrm year, month and day. Push Bto jump to Parameter setting or
push Cto exit settings mode.
To edit Time-1, push Ato conrm mode Time-1 and Aagain to adjust ashing display
then push Bto set and conrm hours, minutes and seconds. Push Bto jump to Date
setting or push Cto exit settings mode.
hours
minutes
seconds
A
C
B
Time-1
A
C
B
year
month
day
1514
!" #$ %&'( &$&)

To adjust Time-2, push Bin Time-2 mode at least 1 second, hands are placed at 10h10
and hours are ashing. To change hours/minutes use A button, to set and conrm
push B. Note: Time-2 is always in 30min intervals relative to Time-1.
A
C
B
hours
minutes
Time-2Parameter
To edit Param, push Ato conrm mode Param and Aagain to adjust ashing display
followed by pushing Bto set and conrm 12h/24h, m/ft and chime --/on. Push Bto
jump to Time-1 setting or push Cto exit settings mode.
A
C
Bchime --/on
unit m/ft
unit °C/°F
1716
!" #$ %&'( &$&)

Push Ato start/stop the chrono in chrono mode. Push Bto freeze/unfreeze or reset
the chrono. Note: As long the pictograms are blinking, the chrono is running. You can
switch to another operation while chrono is running.
To set the Alarm (o/on) push Ain Alarm mode. To adjust Alarm time push Bat least
1 second, hands are placed at 10h10. To change hours/minutes/status use A button, to
set and conrm push B. To exit settings mode quickly push C.
A
C
B
hours
minutes
status --/on
A
C
B
start/stop
reset
freeze/unfreeze
Each action place hands
at 10h10 for 20 seconds.
ChronographAlarm
1918
!" #$ %&'( &$&)

A
C
B
Restart measure for 20s,
hands are placed at 10h10
Precise “outside” tempera-
ture is shown on the display
in unit selected (°C or °F)
>chapter settings
Hands are placed at 10h10
for 20 seconds
Thermometer Barometer
Note: For the best reading of the temperature, remove the watch from your wrist and
wait for approximately 15-30 minutes. When Thermometer is in standby mode hands
are placed at Time-1.
The Barometer function shows the weather changes via the relative
atmospheric pressure on the digital display in hPa – it indicates a trend.
When Barometer is in standby mode hands are placed at Time-1.
A
C
B
Restart measures
for 20 seconds
Hands are placed at 10h10
for 20 seconds, measure
is updated
17 last measures
made every 30 minutes
Atmospheric pressure
in hPa
2120
!" #$ %&'( &$&)

A
C
B
Restart measure for 20
seconds
1 sec: Head setting
1 sec: Compass declina-
tion and calibration
North
Head
Angle between
North and 12h
To exit settings mode
Compass Head setting – Compass
Indicates geographic North using magnetic North and the adjustable East and West
declination. When Compass is in standby mode hands are placed at Time-1.
To adjust Head push Aat least 1 second, hands are placed at 10h10. Push on Aor Bto
change Head. To exit settings mode push the crown, or wait for 5 sec.
A
C
B
+
-
To exit settings mode
2322
!" #$ %&'( &$&)

A
C
B
Compass – Declination and Calibration
Declination can be set from 40° East to 40° West. To calibrate Compass
Hands will run, turn the watch to keep hand in front of you. When calibration is
nished the compass get out of settings mode.
A
B
Restart measures for 20 sec
and erases old graph
1 sec: Interval setting
Hands are placed at 10h10 for
20 sec and Altitude is updated
1 sec: Altitude calibration
17 measures made
at the interval selected
Altitude
To exit settings mode
Altimeter
Adjustable display of the altitude above sea level in m/ft. The calculation depends
on the atmospheric pressure. For correct use of the altimeter, calibrate it as frequently
as possible. When Altimeter is in standby mode hands are placed at Time-1. 2524
!" #$ %&'( &$&)

Altimeter – Interval setting
To adjust Interval measure push Afor at least 1 sec, hands are placed at 10h10. Push A
again to choose interval: 1s, 5s, 20s, 1min, 5min, 15min or 30min. To exit settings mode
push the crown C, or wait for 5 sec.
A
C
B
A
B
+
-
To exit settings mode
To calibrate Altimeter push Bfor at least 1 second, hands are placed at 10h10. Push A
to add or Bto subtract metres/feet. To exit settings mode push the crown C, or wait
for 5 sec.
Altitude calibration – Altimeter
Choose Interval – Measuring time
1 s – 0h00’17
5 s – 0h01’25
20 s – 0h05’40
1 min – 0h17’00
5 min – 1h25’00
15 min – 4h15’00
30 min – 8h30’00
Beep signal indicates end of new measurement
2726
!" #$ %&'( &$&)