Rockville HP4S User manual

RockvilleAudio.com
OWNER’S MANUAL
Mounting
HP4S/HP4S-8
HP4S BK/HP4S-8 BK
© 2019 ROCKVILLE // Features and specifications are subject to change and or improvement without notice
1. Remove the bracket knobs and the bracket from the speakers.
2. Hold the bracket up to the mounting surface. These speakers can be mounted
horizontally or vertically. Use a level to ensure that the bracket is square with its
surroundings.
3. Once the bracket is level, mark the location of the three screw holes. Be sure
to use all the screw holes as this will ensure that the bracket is securely attached
to the mounting surface.
4. Remove the bracket and drill holes were your marks are.
5. Gently pull the speaker wire through the large circular hole in the middle of the
bracket. Now place the bracket against the mounting surface so that the holes
all line up.
6. Use the included hardware to attach the bracket to the mounting surface.
7. Mount the speaker to the bracket and tighten the moutning knobs. Do not
tighten completely.
8. Check to make sure the speaker is in phase and functioning correctly. Angle
the speaker to desired position.
9. Hand tighten the bracket knobs. Do not use power tools as they may over
tighten the knobs and strip the threads of the insert.
10. Double check that the installation is safe and secure.
4˝ 360 Watt Outdoor/Indoor Home Theater
Speakers w/Swivel Brackets
max ±66°

Features/Specifications
Dimensions
Connecting your Speakers
HP4S/HP4S-8/HP4S BK/HP4S-8 BK
• Peak Power Handling: 360 Watts (per pair)
• RMS Power Handling: 120 Watts (per pair)
• Polypropylene Cone
• Rubber Surrounds
• 1˝ Aluminum Voice Coils
• 4˝ Woofer
• ½˝ Mylar Dome Tweeters
• 8 oz. Ferrite Magnet
• Gold Plated Spring Loaded Push Terminals
• Completely Waterproof
• Tough ABS Construction
• Swiveling Metal Mounting Brackets
• Removable Metal Rustproof Grills
• Built-in Capacitor Crossover Network
• Frequency Response: 80Hz – 20KHz
• Sensitivity: 90dB @ 1w / 1m
• Impedance: Available in 4 Ohm or 8 Ohm
• Dimensions (H*W*D): 8.11˝ x 5.51˝ x 4.72˝ (206 x 140 x 120mm）
• Color: Available in White or Black (w/paintable grills)
The Rockville HP-S series outdoor/indoor home theater speakers feature heavy
duty ABS construction and can literally be thrown off your roof without getting
damaged. These are also completely waterproof. You can keep them outdoors in
the rain and moisture and they will not get damaged. These speakers are perfect
for patios, large backyards, and indoor applications. These are also perfect for
use in commercial spaces like gyms, hotels, and more. Rubber surrounds elimi-
nate unwanted distortion while our forward-facing bass reex port adds a
deeper, more powerful bass response. Each pair puts out 120 watts RMS and
360 watts peak power. These speakers are extremely loud! We upgraded our
model with gold-plated spring loaded push button terminals for easy and secure
wiring.
Please read this guide carefully for proper use of your Rockville HP-S series
outdoor/indoor home theater speakers. Should you need technical assistance
please call our technical help line at 1-646-758-0144, Monday through Friday,
9am to 5pm EST.
Connecting the speakers to your amplier
or receiver.
• First turn your amplier off to avoid
damage which may result from accidental
shorting of the speaker leads.
• Correct phase polarity is critical for
proper stereo imagingand bass perfor-
mance. The red (+) terminal on your
amplier or receiver must be connected to
the red (+) terminal on your speaker, the
same applies for the balck (-) terminal.
• Connect one loudspeaker at a time to
ensure proper connection of left and right
channels. Make sure all wires are rmly
fastened.
• If you notice a high level of bass or
central image focus, double check your
connections for proper polarity.
120mm
(4.7 2˝ )
140mm
(5.51˝ )
206mm
(8.11˝ )
NEGATIVE TERMINAL
(BLACK)
POSITIVE TERMINAL
(RED)
CONNECT POSITIVE WIRE
TO POSITIVE TERMINAL OF
YOUR AMP OR RECEIVER.
CONNECT NEGATIVE WIRE
TO NEGATIVE TERMINAL OF
YOUR AMP OR RECEIVER.