Rogers Athletic Iso Sled User manual

0
Product Information Packet
Product Name: Iso Sled
Product Part Number: 410471 & 410472

1
Table of Contents
Introduction………………………………………………………………………………..………………………
General Safety Rules..............................................................................................................................
Symbols..................................................................................................................................................
Technical Specifications………………………………………………………………….....………………….
Assembly Instructions……………………………………………………………………….…………………..
Maintenance………………………………………………………..………………………..……………………
Customer Service Information………………………………………..………………….……………………..
Introduction
The Rogers Athletic Iso Sled has been designed and manufactured with safety, performance and dependability
as top priorities, making it easy to operate and maintain.
The care you give your Iso Sled will greatly determine your satisfaction with its performance and service life.
Careful study of this manual is encouraged to obtain a thorough understanding of your new Iso Sled and its
functions and maintenance.
If your manual becomes lost or destroyed, Rogers Athletic will gladly provide you with a new copy. Should you
require additional information or assistance, please feel free to contact us at 1-800-457-5337.
BECAUSE ROGERS ATHLETIC MAINTAINS AN ONGOING PROGRAM OF
PRODUCT DEVELOPMENT AND IMPROVEMENT, WE RESERVE THE RIGHT
TO MAKE IMPROVEMENTS IN DESIGN OR CHANGES IN SPECIFICATIONS
WITHOUT INCURRING ANY OBLIGATIONS TO INSTALL THEM ON UNITS
PREVIOUSLY SOLD.
1
2
3
4
5
7
7

2
General Safety Rules
SAVE THESE INSTRUCTIONS
Read the Product Information Packet. Failure to read the information packet is considered a misuse
of this equipment.
Inspect equipment prior to use. DO NOT use if it appears damaged or inoperable.
Obtain a medical exam prior to beginning any new physical activity. Use equipment only if
properly fit to engage in physical activity.
Stop physical activity if you feel faint, dizzy, or experience pain at any time and consult your
physician.
Use field equipment in a supervised environment.
Keep body and clothing clear of all moving parts.
Stay clear of all pinch points.
Become familiar with all caution and warning decals affixed to the field equipment before use.
Never cover or deface caution/warning labels.
Remove pads after use. Store pads in dry safe place.
Save these instructions. Refer to them frequently and use them to instruct others who may use the
Iso Sled. If you loan someone your Iso Sled, loan them these instructions also.
Always wear a helmet when using the Iso Sled.
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below may result in serious personal injury

3
Symbols
Read the Operator’s Manual: To reduce risk of injury, user must
read and understand operator’s manual before using this product.
Do Not Climb Warning Label: To reduce risk of injury, do not
climb on field equipment.
Safety Alert: Precautions that involve your safety.
Pinch Point Symbol: Failure to keep hands away from
pinch points may result in personal injury.

4
Rogers Athletic Iso Sledtm Specifications
Iso Sled (Part # 410471 & 410472)
Iso Sled Construction, Finish, and Hardware
- Constructed of ASTM specified steel.
- Baked-on powder coat finish.
- Pads covered with durable weather-resistant vinyl.
- Zinc-plated hardware.
Weight & Width:
1-Man Iso Sled 335 lbs and 44” W
2-Man Iso Sled 509 lbs and 61 11/32” W without
pads; with Shock pad 74 7/32”; with Surge 86 3/16”
Height: 40” without pad, with pads 59”
Length: 93 5/8” without pad, with pads 102”
- For linebackers, defensive backs and other
defensive players that have to defeat
blocks at a different angle than down
linemen.
- The Iso Sled has the Lev Sled head but it
is parallel to the ground providing a better
angle for defensive players.
- Unique release mechanism allows pad to
be raised only after the ram has been
compressed at least five inches, helping
develop proper drive technique.
- Choose from Surge or Shock Pad.
- Comes in 1- or 2-man sled.
H
W L

5
Note: For 2 man Iso Sled setups skip to step 5.
Lay Iso Runner Sub Assembly on its side. Line up
holes from the Iso Outrigger with holes on the runner
and use (2) 5/8” x 6” bolts and (2) 5/8” washers to
hold it in place. Then flip runner right side up so
outrigger lays on the ground. Push bolts the rest of
the way through. Fit second outrigger over the bolts and secure with
(2) more 5/8” washers and (2) 5/8” nuts.
The Lev Ram Unit comes with (3) nuts on the
threaded rod at the end of the spring. Remove (2)
to use later. Install the Lev Ram Unit by inserting it
spring side first into the Lev Head Unit. The
threaded rod on the end of the spring fits through a
hole at the back of the head unit. Use the (2) nuts
you removed earlier to secure the ram in place. Attach the Surge or Shock pad to the ram unit by
sliding pad over ram and inserting fas-pin.
1 2
3 4

6
Maintenance
Frequently check to see that all bolts are securely fastened.
Touch up paint may be used to cover scratches or blemishes sustained through use.
Field equipment should be washed periodically with soapy water to maintain original surface
finish.
A silicone based lubricant may be used on moving parts to maintain proper function.
Replace any damaged equipment with genuine Rogers Athletic parts. Failure to do so may result
in unsafe equipment and/or personal injury.
For 2 man sleds: Lay Iso Runner Sub Assembly on its side. Connect the runner to the connection link
and then stand runner upright to connect the next sled runner. See steps 3 & 4 for ram unit and pad
installation. Hardware used for the Connection Links is (4) 5/8” x 6” bolts, (4) 5/8” nuts, and (8) 5/8”
washers per Iso Runner Sub Assembly.
5
WARNING!
READ AND UNDERSTAND ALL MAINTENANCE PROCEDURES.
Failure to follow all procedures listed below may cause serious injury and/or a
decrease in equipment functionality.

7
Customer Service
For parts or service contact Rogers Athletic Company. When ordering parts be sure to provide all relevant
information available including the name and part number of the equipment purchased. This information is
located on the cover of this product information package. Customer service hours are Monday through Friday
from 8:00 a.m. to 5:00 p.m. Eastern Standard Time. Customers can phone [phone] or toll free at (800)
457-5337. Fax toll free at [phone] or mail to:
Rogers Athletic Company
3760 W. Ludington Drive
Farwell, MI 48622
Rogers Athletic Company
3760 N. Ludington Drive
Farwell, MI 48622
www.rogersathletic.com
[phone]
[phone]
Fax toll free [phone]