Polanik PP-176 User manual

TECHNICAL SPECIFICATION
ASSEMBLY MANUAL
Aluminium training hurdles
PP- 76
PP- 77
File: 2012-06-05
PRODUCT SUPPORT
Pawel Ciechanowski
p.ciechano[email protected]

Technical specification / Asse bly anual PP-176 PP-177 2/6
Contents
Chapter Page
I. General description and use 2
II. Technical specification 2
III. Parts list 3
IV. Asse bly 3
V. Operation and aintenance 4
VI. Packing and transport 4
VII. Product i ages 5
VIII. Declaration 6
I. General description and use
Alu iniu training hurdles(PP-176 i PP-177) are pieces of athletics equip ent and are designed for training hurdle
races for juniors and seniors in sports schools and clubs. The collapsible construction lowers the transport costs.
II. Technical specification
Code PP- 76 PP- 77
Hurdle type training, collapsible
(A) Top board
plastic, with inside ribbing
(B)Telescope tube
alu iniu , powder painted,
syste of push button height
adjust ent
(C) Frame
alu iniu , anodized
(D) Foot with per anently fixed
counterweights
Heights[mm]
- 600
686 686
762 762
838 838
914 914
991 -
1067 -
(E) Top board’s
length [mm] 1150 1150
(F) Feet’s length
[mm] 610 610
Net weight [kg] 3,6 3,4
A
B
C
D
E
F

Technical specification / Asse bly anual PP-176 PP-177 3/6
III. Parts list (part sets)
The hurdle is delivered in parts and one co plete hurdle contains:
No. Part\set description Q-ty
pcs
Sketch
1 Hurdle fra e 1
2 Hurdle foot 2
3 Washer 2
4 Foot screw 2
IV. Assembly
Foot screws (ite 4) are te porarily screwed into hurdle feet for transport (or they can be found in a separate box
when big quantities of the hurdles are delivered). A etric wrench no. 13 is needed to perfor the asse bly.
Although one person can prepare the hurdle for use, a convenient and fast asse bly process requires two persons.
To asse ble the hurdle do the following:
a) slide carefully one hurdle foot (ite 2) into
one socket of the fra e (ite 1),
b) ake sure the foot (ite 2) is properly
placed in the socket, if it is not straight, please
correct its position,
c) screw the foot (ite 2) to the hurdle fra e
(ite 1) by eans of the foot screw (ite 4)
and the washer (ite 3),
d) install the other foot in the sa e way.

Technical specification / Asse bly anual PP-176 PP-177 4/6
The ain goal of the hurdle collapsible construction is to assure easy and cheap transport. Please note that once you
screw the feet down, the hurdle is practically non-dis ountable. Therefore we do not reco end unscrewing the
hurdle feet during idle periods. Re oving the feet without proper tools can cause serious hurdle da ages.
V. Operation and maintenance
During an idle periods the hurdles ust be stored in a roofed and dry place. For opti al perfor ance they should be
stored and transported on Polanik hurdle cart: S-259. After every athletics season the hurdle ust be cleaned fro
sand ( ud, dust and etc).
VI. Packing and transport
Hurdles are put on pallets In parts (fra es and feet separately) and
wrapped with foil.
Package type Foiled pallet
Di ensions
[c ]
contents 30 pcs.
Length 120
Width 80
height 90
Volu e[ 3] 0,86
Gross weight [kg] ~190
Box with
hurdle feet
Box with foot
screws
Fra es with telescope tubes and
top boards

Technical specification / Asse bly anual PP-176 PP-177 5/6
VII. Product images
PP-176 PP-177 © 2012 Polanik Sp. z o. o.
The producer reserves the right to introduce without warning changes in product constructions and colours.

Technical specification / Asse bly anual PP-176 PP-177 6/6
VIII. Declaration
1)No. 2012-06-05
2)Issuer’s na e: POLANIK Sp. z o. o.
Issuer’s address: Życzliwa 11, 97-300 Piotrków Tryb.
3)Object of declaration:
4)The object of declaration described above is in confor ity with the require ents of the following docu ents:
Articles Docu ent title Issuer
Rule 168
points 2, 4
Co petition Rules 2010-2011
International Association of Athletics Federations
IAAF
17, rue Princesse Florestine
BP 359 – MC 98007 Monaco Cedex
Tel. [phone]
Faks [phone]
www.iaaf.org
5)Declaration for:
Buyer/Distributor/User
Signed for and in behalf of:
POLANIK Sp. z o.o.
2012-06-05 Piotrków Tryb.
(Date and place of issue)
6)Pawel Ciechanowski
Product Manager
…………………….………………….. ……………………………………………………………………………
(Na e, function) (Signature or equivalent authorized by the issuer)
No. Na e Code
1 Training alu iniu hurdle, collapsible PP- 76
2 Training alu iniu hurdle, collapsible PP- 77