Rohl U.4891LS-2 User manual

www.rohlhome.com
ROHL Perrin & Rowe®Kitchen
COLORS/FINISHES
• Polished Chrome
• Polished Nickel
• Satin Nickel
• English Bronze
WARRANTY
• Limited Lifetime
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
FEATURES
• 1⁄2”M NPSM supplies
• 1⁄4-turn ceramic disc valves
• Insulated brass sidespray
• 14 1⁄2” spout height
• 9” reach swivel spout
• Brass construction
• Inca Brass not available
• 1.8 GPM
CONTEMPORARY 4-HOLE “C” SPOUT KITCHEN FAUCET WITH
SIDESPRAY
U.4891LS-2
5 7/8" - 16" Centers
14 1/2"
9"
8 1/4"
5"
Ø1 1/8"
HOLE
Ø1 1/8"
HOLE
Ø1 3/8"
HOLE
1/2" NPT
Ø1 3/4"
Ø2 3/8"
1 3/4
"
MA
X
3 1/8"
2 1/2"
Ø2"
47 1/4” Hose L
ength

www.rohlhome.com
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
INSTALLATION INSTRUCTIONS
Contemporary 3 & 4 Hole Mixers
Perrin & Rowe is a registered trademark. 9004885U Issue 5
Temp Range:
Min 1°C/34°F
Max 85°C/185°F
Recommended
Working Pressure:
Max5bar/75psi
Min 1bar/15psi
Ideal performance obtained with equal hot & cold pressures.
• U.4892X U-Spout W/Rinse
• U.4893LS U-Spout W/Rinse
* Where indicated please specify color
SPARES
1.3/4"
MAX
1.1/8"
HOLE
1.1/8"
HOLE
1.3/8"
HOLE
1.3/4"
MAX
1.3/8"
HOLE
1.1/8" HOLE
RINSE SERVICE KIT
9.54755
9.19776
9.28426*
9.26400
9.28512
9.17862*
9.250150
9.285113
9.13363
NON-RINSE
9.13362
RINSE
9.18381*
MIXER SERVICE KIT
9.54885
9.03700
9.14700
9.12054*
9.18056*
9.13195 R
9.13196 L
9.13196
9.12055*
6-15" CNTRS
6-15" CNTRS
ROHLWARRANTY POLICY
All products supplied by ROHL carry warranties against manufacturing defects.
Perrin & Rowe products carry a Limited Lifetime Warranty.
ROHL LLC will provide free of charge, as its options, replacement part(s) or product (or a comparable alternative
product) to replace those which have proven defective in materials or workmanship.
For full ROHL LLC WARRANTY please contact ROHL or visit www.rohlhome.com
SPARE PARTS & SERVICE
3 Parker
Irvine
CA 92618
[phone]
www.rohlhome.com
The Contemporary Kitchen Collection
Installation & User Guide
Perrin & Rowe products are manufactured in the UK, using the latest
technology and built to the highest quality standards.
We would like to thank you for purchasing a Perrin & Rowe product and
take this opportunity to invite you to look at other luxury products by us.
Please contact us to recieve our latest catalogue.
9.20868*
9.12861*
9.12861*
9.17862*
9.250150
9.20867*
47.1/4"
HOSE
LENGTH
9" CNTRS
9.1/4" CNTRS
HOT IN
1/2"
NPT
COLD IN
1/2"
NPT
HOT IN
1/2"
COLD IN
1/2"
9.01875*
9.13201
9.01057*
9.01056*
• U.4890X C-Spout W/Rinse
• U.4891LS C-Spout W/Rinse
2.1/2"
14. 1/2" 2.1/2"
14. 1/4"
5"

www.rohlhome.com
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
INSTALLATION INSTRUCTIONS
Contemporary 3 & 4 Hole Mixers
Perrin & Rowe is a registered trademark. 9004885U Issue 5
Temp Range:
Min 1°C/34°F
Max 85°C/185°F
Recommended
Working Pressure:
Max5bar/75psi
Min 1bar/15psi
Ideal performance obtained with equal hot & cold pressures.
• U.4892X U-Spout W/Rinse
• U.4893LS U-Spout W/Rinse
* Where indicated please specify color
SPARES
1.3/4"
MAX
1.1/8"
HOLE
1.1/8"
HOLE
1.3/8"
HOLE
1.3/4"
MAX
1.3/8"
HOLE
1.1/8" HOLE
RINSE SERVICE KIT
9.54755
9.19776
9.28426*
9.26400
9.28512
9.17862*
9.250150
9.285113
9.13363
NON-RINSE
9.13362
RINSE
9.18381*
MIXER SERVICE KIT
9.54885
9.03700
9.14700
9.12054*
9.18056*
9.13195 R
9.13196 L
9.13196
9.12055*
6-15" CNTRS
6-15" CNTRS
ROHLWARRANTY POLICY
All products supplied by ROHL carry warranties against manufacturing defects.
Perrin & Rowe products carry a Limited Lifetime Warranty.
ROHL LLC will provide free of charge, as its options, replacement part(s) or product (or a comparable alternative
product) to replace those which have proven defective in materials or workmanship.
For full ROHL LLC WARRANTY please contact ROHL or visit www.rohlhome.com
SPARE PARTS & SERVICE
3 Parker
Irvine
CA 92618
[phone]
www.rohlhome.com
The Contemporary Kitchen Collection
Installation & User Guide
Perrin & Rowe products are manufactured in the UK, using the latest
technology and built to the highest quality standards.
We would like to thank you for purchasing a Perrin & Rowe product and
take this opportunity to invite you to look at other luxury products by us.
Please contact us to recieve our latest catalogue.
9.20868*
9.12861*
9.12861*
9.17862*
9.250150
9.20867*
47.1/4"
HOSE
LENGTH
9" CNTRS
9.1/4" CNTRS
HOT IN
1/2"
NPT
COLD IN
1/2"
NPT
HOT IN
1/2"
COLD IN
1/2"
9.01875*
9.13201
9.01057*
9.01056*
• U.4890X C-Spout W/Rinse
• U.4891LS C-Spout W/Rinse
2.1/2"
14. 1/2" 2.1/2"
14. 1/4"
5"

www.rohlhome.com
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
INSTALLATION INSTRUCTIONS
Please Note: Ceramic disc valves are fitted as standard
to this mixer. Flow from FULLY OFF to FULLY ON is
achieved by rotating the handles a quarter turn.
CARE & MAINTENANCE
Wipe down after use to avoid water spotting and mineralbuild up.
Occasional cleaning with warm soapy water, followed by a polish with a soft cloth is all that is required to keep the
plated finish in good condition.
Do not use proprietary abrasive liquids, powders, or pads to clean the shower. Do not use any
products with ammonia bleach or limescale remover. You will damage the plated finish andvoidyour
guarantee.
BEFORE USE
• Carefully check the installation for leaks.
• If further building work is to be carried out in the vicinity, cover the tap with a plastic bag to avoid damaging
the finish.
• Please ensure that the installation complies with the water supply bye-laws.
If your mixer has a side spray please follow steps 3
& 4 to install correctly, otherwise please connect
Hot & Cold water supplies.
Secure side spray unit socket in a suitable position
using a faucet wrench or a 36mm AF (1 7/16")
wrench.
Place flexible hose through top of side spray unit
socket as shown in diagram.
Screw flexible hose onto the end of side spray hose.
Ensure connections arefirmly tightened.
Ensure black rubber washer is in place before securing
side spray to flexible hose.
Holding the side spray, screw the flexible hose onto the
end of side spray and place into side spray unit socket.
Make sure orientation of side spray is correct.
Connect Hot & Cold water supplies to shanks.
Ensure all connections arefirmly tightened.
1
2
SPOUT
BASE RING
CLAMP BOLT
LARGE BASE
SEAL
SECURING NUTS BOX WRENCH
Secure spout with supplied Box Wrench.
Ensure all connections arefirmly tightened
HOOD & LEVER
ROSETTE
FIXING NUT
SMALL BASE SEAL
VERNIER INSERT
WASHER
BACKNUT
FLEXIBLE HOSE
Sidevalve to be installed from underside of work surface as shown.
Leave backnut & washer at the bottom of valve body and place the
valve body up through the work surface hole.
Assemble small base seal and fixing nut from the topside of work
surface. For correct alignment ensure that top of fixing nut is level
with top of valve body (See enlarged image).
Screw backnut up to the underside of the work surface using a
faucet wrench or a 28mm AF (1 1/8") wrench. Ensure connection
for the flexible hose is facing towards spout.
Before screwing down the hood & lever please make sure
orientation of levers is correct. Slide the hood & lever over the top
of valve body just enough to see if it is correctly orientated.
Correct orientation can be achieved by removing and turning the
vernier insert.
Connect flexible hose as shown.
Repeat the above procedure for the cold sidevalve.
BASE SEAL
SIDE SPRAY UNIT
SOCKET
FIBRE WASHER
BACKNUT
FLEXIBLE HOSE
3G /8"
SIDE SPRAY HOSE
BLACK RUBBER
WASHER
SIDE SPRAY
SIDE SPRAY
UNIT SOCKET
FLEXIBLE HOSE
INSTALLED SIDEVALVE
Congratulations on the purchase of your Perrin & Rowe Kitchen Product. Correctly installed and with sensible care,
this product will give you many years of trouble free service.
The Contemporary Kitchen Collection
Installation & User Guide
IMPORTANT INFORMATION
The following instructions arefor therinse andnon-rinse version of the model you are installing.
Please read carefully to ensurecorrect installation.
Beforeyou proceed... Werecommendyou engage the servicesof aregistered plumber to install
this product.
For ease of possible future servicing, we also recommendthefittingof conveniently placed
isolatingvalves.
In addition to the guide below it is essential that thewritten information overleaf is carefully read
andunderstood.
Preparation Check Boxfor Installer
Flush the plumbing system before
installing the kitchen product.
Once unpacked remove large & small base seals,
rosette, hood & lever, fixing nut, securing nut
and clamp plate ready for installation.
CLAMP PLATE
1/2" NPT
VALVE BODY
4
3
WORK SURFAC E
WORK SURFAC E
WORK SURFAC E
WORK SURFACE
WORK SURFACE

www.rohlhome.com
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
INSTALLATION INSTRUCTIONS
Please Note: Ceramic disc valves are fitted as standard
to this mixer. Flow from FULLY OFF to FULLY ON is
achieved by rotating the handles a quarter turn.
CARE & MAINTENANCE
Wipe down after use to avoid water spotting and mineralbuild up.
Occasional cleaning with warm soapy water, followed by a polish with a soft cloth is all that is required to keep the
plated finish in good condition.
Do not use proprietary abrasive liquids, powders, or pads to clean the shower. Do not use any
products with ammonia bleach or limescale remover. You will damage the plated finish andvoidyour
guarantee.
BEFORE USE
• Carefully check the installation for leaks.
• If further building work is to be carried out in the vicinity, cover the tap with a plastic bag to avoid damaging
the finish.
• Please ensure that the installation complies with the water supply bye-laws.
If your mixer has a side spray please follow steps 3
& 4 to install correctly, otherwise please connect
Hot & Cold water supplies.
Secure side spray unit socket in a suitable position
using a faucet wrench or a 36mm AF (1 7/16")
wrench.
Place flexible hose through top of side spray unit
socket as shown in diagram.
Screw flexible hose onto the end of side spray hose.
Ensure connections arefirmly tightened.
Ensure black rubber washer is in place before securing
side spray to flexible hose.
Holding the side spray, screw the flexible hose onto the
end of side spray and place into side spray unit socket.
Make sure orientation of side spray is correct.
Connect Hot & Cold water supplies to shanks.
Ensure all connections arefirmly tightened.
1
2
SPOUT
BASE RING
CLAMP BOLT
LARGE BASE
SEAL
SECURING NUTS BOX WRENCH
Secure spout with supplied Box Wrench.
Ensure all connections arefirmly tightened
HOOD & LEVER
ROSETTE
FIXING NUT
SMALL BASE SEAL
VERNIER INSERT
WASHER
BACKNUT
FLEXIBLE HOSE
Sidevalve to be installed from underside of work surface as shown.
Leave backnut & washer at the bottom of valve body and place the
valve body up through the work surface hole.
Assemble small base seal and fixing nut from the topside of work
surface. For correct alignment ensure that top of fixing nut is level
with top of valve body (See enlarged image).
Screw backnut up to the underside of the work surface using a
faucet wrench or a 28mm AF (1 1/8") wrench. Ensure connection
for the flexible hose is facing towards spout.
Before screwing down the hood & lever please make sure
orientation of levers is correct. Slide the hood & lever over the top
of valve body just enough to see if it is correctly orientated.
Correct orientation can be achieved by removing and turning the
vernier insert.
Connect flexible hose as shown.
Repeat the above procedure for the cold sidevalve.
BASE SEAL
SIDE SPRAY UNIT
SOCKET
FIBRE WASHER
BACKNUT
FLEXIBLE HOSE
3G /8"
SIDE SPRAY HOSE
BLACK RUBBER
WASHER
SIDE SPRAY
SIDE SPRAY
UNIT SOCKET
FLEXIBLE HOSE
INSTALLED SIDEVALVE
Congratulations on the purchase of your Perrin & Rowe Kitchen Product. Correctly installed and with sensible care,
this product will give you many years of trouble free service.
The Contemporary Kitchen Collection
Installation & User Guide
IMPORTANT INFORMATION
The following instructions arefor therinse andnon-rinse version of the model you are installing.
Please read carefully to ensurecorrect installation.
Beforeyou proceed... Werecommendyou engage the servicesof aregistered plumber to install
this product.
For ease of possible future servicing, we also recommendthefittingof conveniently placed
isolatingvalves.
In addition to the guide below it is essential that thewritten information overleaf is carefully read
andunderstood.
Preparation Check Boxfor Installer
Flush the plumbing system before
installing the kitchen product.
Once unpacked remove large & small base seals,
rosette, hood & lever, fixing nut, securing nut
and clamp plate ready for installation.
CLAMP PLATE
1/2" NPT
VALVE BODY
4
3
WORK SURFAC E
WORK SURFAC E
WORK SURFAC E
WORK SURFACE
WORK SURFACE