Rohl G1655LM User manual

www.rohlhome.com
COLORS/FINISHES WARRANTY
Consult your local ROHL showroom for additional information and specications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
FEATURES
• Hot water faucet only
• Unique Anti-Scald lock: innovative push mechanism
with exclusive spring-back valve
• Long lasting brass construction
• Swivel spout for ease of lling containers
• For use with U.1998 high performance hot water tank
and U.1106 lter
ITALIAN KITCHEN TRADITIONAL C-SPOUT HOT WATER FAUCET
G1655LM
2 23/32”
2 29/64”
G1/2”
G3/8”
Ø15/32”
5 9/16”
6 41/64”
2 7/8”
19”
2”
10”
3 51/64”
Ø1 31/32”
• 5-year Limited Warranty on Faucet
*5-year Limited Warranty in Italian Brass
and Matte Black
** No Warranty on Tuscan Brass and
Unlacquered Brass
ROHL — Italian Kitchen Filtered Hot Water Dispensers
• Polished Chrome
• Polished Nickel
• Satin Nickel
• Matte Black*
• Italian Brass*
• Tuscan Brass**
• Unlacquered Brass**

www.rohlhome.com
Consult your local ROHL showroom for additional information and specications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
INSTALLATION INSTRUCTIONS

www.rohlhome.com
Consult your local ROHL showroom for additional information and specications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
INSTALLATION INSTRUCTIONS
HOT WATER DISPENSER COLLECTION
FOR USE ONLY WITH PERRIN AND ROWE HOT WATER TANK
SCALDING HAZARD: The tap dispenses water up to
208.4°F (98°C), which can instantly cause scalds or
burns. Use care when operating this appliance.
RECOMMENDED WORKING PRESSURE
Min 1.5bar / 22psi | Max 5bar / 75psi
9.2”
5.5”
1.2/8”
HOLE
1/4”
2MAX
10”
5.5”
1.2/8”
HOLE
1/4”
2MAX
10”
5.5”
1.2/8”
HOLE
1/4”
2MAX
10”
5.5”
1.2/8”
HOLE
1/4”
2MAX
G1445
G7545 MB7945
G1655

www.rohlhome.com
Consult your local ROHL showroom for additional information and specications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
INSTALLATION INSTRUCTIONS
The Hot Water Dispenser Collection
2
Installation & User Guide
Congratulations on the purchace pf your ROHL product. Correctly installed and with sensible care, this product
will give you many years of trouble free service.
IMPORTANT INFORMATION
Before you proceed... We recommend you engage the services of a registered plumber / builder to
install this product.
Ensure you also read and understand the instruction manual that accompanies your Perrin and Rowe
heater tank unit.
To avoid perminent damage to the heater tank it is important not to plug the unit until indicated in
heater tank installation manual. Only operate the tank after it is lled with water.
In addition to the guide below it is essential that the written information is carefully read and
understood.
Preparation Check Box for Installer
Flush the plumbing system before installing
the kitchen product
Once unpacked, remove nut and clamping
plate ready for installation.
1. Unpack the hot water dispenser on a rm
at surface.
2. Carefully straighten the tubing from the
bottom of the dispenser.
3. Ensure the base ring and the O seal are
in place.
Attach to the tank inlet
Attach silicone tube using the clip
Mains water inlet from lter if aplicate

www.rohlhome.com
Consult your local ROHL showroom for additional information and specications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
INSTALLATION INSTRUCTIONS
3
The Hot Water Dispenser Collection
Installation & User Guide
base ring
base seal
work surpace
clamp plate
nut
threaded stud
water inlet
silicone tube
seal
1. Feed the tubes down through the hole.
In the work surface until the base seal
and base ring are at rest.
2. From under the sink, place the semi-
circular clamping plate and xing nuts
onto the threaded stud.
3. Ensure the tap is the desired angle Insert
a screw driver into the hole in the hex
tool (creating a T), and use to tighten
and secure the faucet.
NOTICE
AN ASSISTANT MAY BE NEEDED TO HOLD
THE TAP IN PLACE WHILE SECURING.
TO EASE FEEDING OF THE TUBES THROUGH
THE HOLE, FIRST INSERT THE BLUE TUBE
WITH QUICK-CONNECT ATTACHMENT AND
THEN INSERT THE REMAINING TUBES.
PLEASE ENSURE YOU HAVE READ & UNDERSTOOD THE
PERRIN AND ROWE TANK GUIDE BEFORE USE.
BEFORE USE
• If further building work is to be carried out in the vicinity, cover the faucet to avoid damaging the nish.
• Please ensure that the installation complies with local plumbing codes.
CARE & MAINTENANCE
Wipe down after use to avoid water spotting and mineral build up.
Occasional cleaning with warm soapy water, followed by a polish with a soft cloth is all that is required to keep the plated
nish in good condition.
Don’t use abrasive liquids, powders, or pads to clean the shower. Don’t use any products with ammonia, bleach, or
limescale remover. You will damage the plated nish and void your guarantee.

www.rohlhome.com
Consult your local ROHL showroom for additional information and specications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
INSTALLATION INSTRUCTIONS
SPARE PARTS & SERVICE
3 Parker Irvine, California 92618-1605
Ph. 800 777 9762
Fax [phone]
We would like to thank you for purchasing a ROHL product and take this
opportunity to invite you to look at other luxury products.
Please contact us to recieve our latest catalogue.
[e-mail] - www.rohlhome.com
ROHL WARRANTY POLICY
Please contact the local retailer or showroom where you purchased this product for all warranty related claims.