8 / BT pairing
When speaker is power on,The blue LED will blink, Find”V5”on your device and
select to pair.
9 / Warning
RS-1040 is IPX7 waterproof.
IMPORTANT: To ensure that the RS-1040 is waterproof, please remove all cable
connections and tightly close the cap; exposing the RS-1040 to liquids without doing
so may result in permanent damage to the speaker. And do not expose RS-1040 to
water while charging, as doing so may result in permanent damage to the speaker or
power source.
IPX67 waterproof is directly subjected to water injection in any direction will not enter
the interior.
10/ What is TWS?
TWS means true wireless stereo. Let's say two Bluetooth speaker are able to be
paired and playing music synchronously.
How to pair your device?
1: Please make sure these two speakers to be paired disconnect from your Bluetooth
device before you turn them on. Then please turn on two speakers.
2: Select either of the speaker. Double click "power" button to enter TWS status.
3: When successfully paired, The LED indication light on either speaker will stay
yellow, and the other speaker will flash blue.
4: Find RS-1040 on your device, select it and connect.
5: Once the speakers are well paired at the first time, they will be automatically
paired next time without the above pairing operation.
6: If the speaker used to be paired, it is suggested to press "M" button for 8 seconds
to forcibly cut off the power. Then restart and have same speaker re-paired with
required new speaker according to the above instruction item 1- item 4.
7: When speakers are paired, only the "master" speaker will answer the phone.
8: EQ (M button) sound effects can be used when TWS mode.