1. Features 2. Standard Accessories 4. Specications 6. Product Structure
7. Operation Steps
Bluetooth Speaker
E10
Bluetooth 3.0 - Connect to any
Bluetooth device
Built-in microphone for hands-free
phone calls
Rechargeable lithium battery
FM Radio
Supports Micro SD Cards with MP3 les
Connects with Apple iPhone, iPad, iPod,
Smartphone, Computer, Laptop,
MP3/MP4 Player
Connect with non-Bluetooth devices via
line in audio jack
What’s in the box?
Portable Bluetooth Speaker
USB Charging Cable
User Manual
Speaker System:
Output: 3W
Frequency Range: 90-20KHz
SNR: 80db
Resistance: 4
Ports:
3.5mm Standard Port
USB-Micro Port (5V)
User Manual
Play/Pause
Answer Phone
Mode
Power Switch
Microphone
Volume Down/
Previous Track
Volume Up/
Next Track
LED Indicator
Charging port
Line In Line Out
MicroSD Card Slot
Basic functions:
Power Button: Slide to turn the
speaker on or o.
Play/Pause Button: Press to start, pause
or resume audio playback.
Adjust Volume: Hold the‘+’ button to
increase volume. Hold the‘-’ button to
lower volume.
Change Tracks: Press the ‘+’ button to
skip track forward. Press the‘-’ button
to skip the track back.
Pairing Your Bluetooth Speaker:
Slide the power button to the‘ON’
position (make sure no MicroSD card is
inside the speaker). The Blue LED indicator
will ash continuously to show the speaker
is ready for pairing.
Enable the Bluetooth function on your
mobile device and search for the speaker,
the name ‘Rokono E10’ should appear.
Select the ‘Rokono E10’ speaker.
If necessary, enter the PIN‘0000’ (4 Zeros)
to connect.
Play your music.
Advanced Functions:
Phone Function
To answer a call: Press the Play/Pause
button to answer an incoming call.
5 6 7 8
3 421
To end a call: Press the Play/Pause
button to end a phone call.
Redial: Hold the Play/Pause button to
redial the last outgoing number (only
when the speaker is not playing music).
Note - The maximum eective distance of the
built-in microphone is 20cm
FM Radio Function
Press the Mode‘M’ button to switch the
speaker to FM mode. Hold the Play/Pause
button, the LED indicator will ash as the
speaker searches for FM radio stations.
Any stations found will be saved
automatically.
When the search is complete press the‘+’
or ‘-’ buttons to change stations.
Press the Play/Pause button to mute or
unmute sound.
Note - The FM signal may be aected by the operating
environment. Plug in the supplied cable to improve
radio signal.
1.
2.
3.
4.
1.
2.
3.
1.
2.
3.
Line In (for non-Bluetooth devices)
Insert the Micro USB end of the supplied
AUX cable into the In Line jack of your
speaker and the 3.5mm audio plug into
your audio device.
Press the Mode‘M’ button to enter
Line In mode.
MicroSD Card Function
Insert a MicroSD card that contains MP3
les. The speaker will begin playing them
automatically. You can also begin playing
them manually by pressing the
Mode ‘M’ button.
Press the‘+’ button to skip to the next
track or the ‘-’button to go back to the
previous track.
Hold the ‘+’ button to turn the volume up
or the ‘-’ button to lower the volume.
Press the Pause/Play button to start,
pause or resume audio playback.
1.
2.
3. Charging Your Speaker
If your speaker is low on battery,
please insert the Micro USB end of
the supplied AUX cable into the
Line In port of the speaker. Connect
the other end of the cable into a
USB port on a Laptop or Computer. 5. Contact Us
If breakage, distortion, overheating or
other abnormal situations occur, please
stop usage and contact us:
1.
2.
3.
English