10.4” Digital Photo FrameRDF-104 User Manual
4. Specifications
Resolution 640x480
Colors 262,144
Brightness 350cd/m2max.
Contrast angle 300:1
Viewing angle 70/70 (l/r),70/40(u/d)
Input voltage:AC110—240V(50HZ—60HZ)
Operation Temperature 32℉~12 12 22℉
2
222
Net Weight 3.3lbs
Media MPEG1/2/4, MP3/JPEG
Card CF /MS/SD/MMC/XD/USB
Auto Start Mode Auto Slide Show JPEG
Photo Playback Mode
1. Loop, Zoom In
2. Auto Slide Show
3. Slide Show with background MP3 music
4. File name, File size, Resolution,
Date Display
5. Interval Time Setup
6. Transition Setup
7. Play/Stop/Pause
Music Playback Mode
1. Play/Stop/Pause
2. Volume Adjust
3. Mute Function
4. Repeat Model Setup
5. File Type, Total Time, Date, Display
Video Playback Mode
1. Play/Stop/Pause
2. Volume Adjust
3. Mute Function
4. Zoom in
5. File information, Time and Date Display
Accessories
1. Remote Control
2. Decorative Frame
3. AC Adapter
4. Operation Manual
10.4” Digital Photo FrameRDF-104 User Manual
5. Control and Slots
Display
DecorativeFrame DesktopStand
USB Menu Power
CF
MS/XD/MMC/SD
6. Setting up the Digital Picture Frame
·Open the package and remove the protective foam. Remove the protective
sleeve from the unit.
· Plug-in the AC power adapter into wall power outlet. Plug the other end
of AC power adapter into round DC Power Jack located at the bottom left
side of the unit.
·Activating the remote control. An activation tab protects the remote
control’s battery during shipment. Pull out the tab to start using the
remote. There is no need to open the battery compartment or remove the
battery.
·After the content is stored on the supported flash memory card, insert the
memory card into the proper memory card slot located at the right of the
unit. Note: Do NOT force the memory card into the slot as the
memorycard should easily slide into proper slot. Damage can be caused
by forcing memory card improperly into unit.
·Power ON the unit by pressing the “power” button located at the top of the
unit or by pressing the“power”button located on the remote control.
4
3