Panel CSC TS 7” - Manual of installation and use
From firmware version 0.31 the external temperature via external sensor is also supported. If no
external sensor is present, the temperature continues to take information from the internet. In the
absence of an internet connection, if the sensor is present, it will read the temperature.
3.1.5 General Settings
The general settings are accessed by pressing the icon , then press "settings" to configure all
aspects of the control panel functionality.
3.1.6 Season setting
To set the operating mode of the temperature control system in heating or cooling mode, access the
settings from the icon , then press "Season" and select winter or summer.
3.1.7 Hourly scheduling
To edit and manage hourly temperature schedules for all zones, access the hourly temperature
schedule from the icon , from the Schedule item.
Once the hourly programming is accessed, the set point temperatures are displayed for the different
time slots of each day of the week, which can be programmed separately for each controlled zone:
●Press on per modificare il valore della temperatura di set.
●Press on to delete the time slot.
●Slide your finger along the dividing line between two successive time slots to change the time
that marks the transition from one time slot to the next.
●Press on to save your changes.
●Press on the arrows to switch to time programming of other zones, or on to return to the
Home screen.
Panel CSC TS 7”
_EN_1.00 Pag. 8 di 16
Rossato Group Srl
