Roverpet FSX48 User manual

Roverpet 20 Kiji Dava Circle Prescott, Arizona 86301 800-658-5925 [email protected]
Page 1 of 3 Freestanding 48” high Expandale Pet Gate
Roverpet #FSX48 48” high x 72” wide Freestanding Expandable Gate Assembly Instructions
Thank you for purchasing your new Roverpet Freestanding Expandable Pet Gate #FSX48. These
instructions will explain how to assemble this Roverpet Expandable Freestanding Pet Gate, of similar
height, to increase its variable potential width to 72”.
STEP1: The Roverpet Freestanding Expandable Pet Gate includes:
(3) #148 48” high panels (2) #FSL-B “Large Leg”
(8) #250 divider clips (4) #RGH gate clips (4) #180 stabilizers
STEP 2: Attach the (4) #RGH clips to your Roverpet panels as shown in the photo below;

Roverpet 20 Kiji Dava Circle Prescott, Arizona 86301 800-658-5925 [email protected]
Page 2 of 3 Freestanding 48” high Expandale Pet Gate
STEP 3: Once the #RGH is attached to the #FSL-B leg, then attach the panels to the #RGH by clipping
the panels into the #RGH.
STEP 4: Overlapping the Roverpet PVC Panels, use the below accessories:
-#250 divider clip (when adjusting panels to desired width, clip over 2 panels @ the top &
bottom… as seen in attached photo) of each panel

Roverpet 20 Kiji Dava Circle Prescott, Arizona 86301 800-658-5925 [email protected]
Page 3 of 3 Freestanding 48” high Expandale Pet Gate
Congratulations, you are now ready to use your Roverpet Freestanding Expandable Pet Gate #FSX48!
Property of Roverpet
www.roverpet.com