Royalcraft 739200 User manual

Product size:
W50*D50*H5cm x 4
The intended use of this product is for domestic use only.
Important, please retain for future reference.
Read carefully .
 .a-mir.co.uk
 
  

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 2 / 3
www.a-mir.co.uk
Before you start
Warnings
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Do not stand or climb onto this product.
This product is intended for domestic use only.
Ensure the base is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Please take care when handling or moving the base as careless
handling may cause damage or injury.
A competent person should carry out assembly. No liability will be
accepted for damage or injury caused by incorrectly installed or
assembled product.
This product is HEAVY after filling with the water or sand or both, it
should be assembled as near as possible to the point of use.
TAKE CARE WHEN LIFTING to avoid personal injury and (or)
damage to the product.
Dos
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on
suitable surface to prevent scratching your product.
Check the pack and make sure you have all of the parts listed.
Please check the pack contents before attempting to assemble
this product. A full checklist of components is given in this leaflet.
If any components are missing, please contact the retailer from
whom you bought this product.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, dry cloth.
Please take care during use to avoid the possibility of pinching or
trapping fingers.
To maintain the look of the base, clean periodically with a damp
lint-free cloth and a little mildly soapy water.
Regularly check the stability of your parasol. Take care when
lifting the base due to the heavy nature of this item.
Don’ts
Do not stand or climb onto the product.
Do not use power tools to construct this product.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaner.
Never drag furniture when moving it, always lift it.
Do not drop it at any time as this may cause it to shatter.
Do not use parasol in high winds.
Number of people required for assembly
One person
Time to assemble
No need of assembly.
Tools required
No need
® Water Fillable Cantilever Parasol Base
Assembly Instructions

Produced in China for A Mir & Co., Ltd.
© A Mir & Co., Ltd. 3 / 3
www.a-mir.co.uk
Recommended method of using this parasol base
(Metal parts are not included)
Open the lid and fill in the water or sand or both of them. Tighten the lid reasonably.
In order to safely stabilize your cantilever parasol, it is recommended to use Fourpieces of
bases for each cantilever parasol. Please select suitable bases as per the actual metal base.
Evenly and carefully place four pieces bases on the metal base which supports the parasol.
The metal base is provided together with your parasol. Please check with your parasol
provider.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Assembly Instructions
® Water Fillable Cantilever Parasol Base