saco Hotpoint LST216 User manual
www.sacoapartments.com welcome
Detergent dispenser
A: Washing detergent compartment
B: Pre-wash detergent compartment
Open cover C by pressing button D. Pour in the detergent, for powder detergent use compartments A and B. For
detergent in tablet form place it in compartment A and close the cover.
Starting the dishwasher
1. Open the door and press the On/Off button, you will hear a short beep and the On/Off and wash cycle indicator
lights switch on for a few seconds.
2. Measure out the detergent
3. Load the dishwasher
4. Select the wash cycle in accordance with the type of crockery and its soil level by pressing the P button; the
indicator light corresponding to the selected wash cycle will switch on.
5. Start the wash cycle by shutting the door; after a few seconds have passed, a long beep signals the start of the
wash cycle.
6. Two short beeps and one long one indicate the end of the wash cycle and the indicator light corresponding to
the wash cycle flashes slowly. Open the door, switch off the appliance by pressing the On/Off button.
7. Wait a few minutes before removing the crockery in order to avoid burns.
Changing a wash cycle in progress
If a mistake was made in the wash cycle selection process it is possible to change the cycle provided that it has only
just begun: open the door, taking care to avoid the escaping steam, press and hold the On/Off button; the machine
will switch off with a long beep. Switch the machine back on using the On/Off button and select the new wash cycle
using the P button; start the cycle by closing the door.
Table of contents
Other saco Dishwasher manuals
