Sage the Vac Q SBL002 User manual

the Vac Q™
SBL002
EN QUICK GUIDE

10
A. Vacuum Pump Housing
B. Power Button
C. Battery Compartment
D. Vacuum Pump Base
E. 4 x AA Batteries
F. Inner Cap with Vacuum Valve
A
D
B
C
E F
Components

EN
11
Functions
BEFORE FIRST USE
Remove and safely discard any packaging
material or promotional labels before using
the attachment for the rst time.
1. Open the battery compartment cover
by twisting the Vacuum Pump housing
to the right side while holding the
Vacuum Pump Base.
2. Insert the batteries correctly
and press rmly to click into position.
3. Replace the Vacuum Pump Housing.

12
USING THE VACUUM PUMP
Applying a vacuum pressure within the blender jug before
blending green smoothies and vegetable dips can enhance
avours, change the texture and improves the overall taste
experience.
We do not recommend using the Vacuum Pump for all blending
processes. For example, dairy based mixes taste better with
air bubbles.
Also, if your food doesn’t have a liquid
element – herbs, spices, or nuts, for
example - vacuum blending will not
have a noticeable impact.
1. To get started, ll the blender
with ingredients and close
the lid rmly.
2. Replace the inner cap of the
blender lid with the inner cap
of the vacuum pump.
3. Place the Vacuum Pump
on top of the Inner Cap
with Vacuum Valve.

EN
13
4. Press the POWER Button to turn
on the Vacuum Pump.The Vacuum
Pump will automatically stop once
a vacuum pressure is reached.
5. Remove the Vacuum Pump from
the blender lid.
6. Operate blender as per manual.
7. Press the Vacuum Valve
to release vacuum pressure
from the blender jug.
8. Remove the Inner Cap with
Vacuum Valve for easy
removal of the blender lid.

14
WARNING
• Always wait until the Vacuum Pump has stopped before
turning on the blender. Do not blend any ingredients
while the Vacuum Pump is operating, as this could
cause damage to the pump.
• Do not use the Inner Cap with Vacuum Valve for
non-vacuum blending.
LIGHTS AROUND POWER BUTTON
A white LED ring will be visible around the Power Button
when the Vacuum Pump is in operation.
If the battery becomes low, the LED ring will ash red
for 5 seconds after vacuuming. In this case the Vacuum
Pump won't be able to achieve vacuum pressure anymore.
Please change all 4 batteries and dispose of the old ones.

EN
15
Care & Cleaning
INNER CAP WITH VACUUM VALVE
• Can be cleaned in dishwasher.
• For thorough cleaning remove the Vacuum Valve
from Inner Cap for hand-cleaning.
VACUUM PUMP
• Always ensure the Vacuum Pump is kept clean after each use.
• Wipe the Vacuum Pump with a clean, damp cloth after
each use. Do not use harsh abrasives or caustic cleaning
products when cleaning this attachment.
• Ensure the Vacuum Pump is thoroughly dry after cleaning.
NOTE
Never immerse the Vacuum Pump in water or any other
liquid. Do not place the Vacuum Pump in the dishwasher.

16
STORAGE
Store the Vacuum Pump on a at, dry surface.
Always remove the batteries if the Vacuum Pump will
not be used for six months or longer.
WARNING
KEEP BATTERIES OUT OF REACH
OF CHILDREN
Dispose of used batteries immediately and safely.
If swallowed, they can be life-threatening. If a battery
has been swallowed, immediately seek medical help.