SAGEMCOM F@ST 2804v2 User manual

253 329 475-A
Edition of may 2010
Reference Manual
F@ST™ 2804v2

F@st™ 2804v2 Reference Manual - 253329475-A
Sagemcom document. Reproduction and disclosure prohibited Page 0-1
Sagemcom assiduously monitors technical developments and is constantly seeking to improve
its products in order to let its clients take full advantage of them. It therefore reserves the right to
modify its documentation accordingly without notice.
All brands mentioned in this guide are registered by their respective owners:
-F@st™ is a registered trademark.
-WindowsTM and Internet ExplorerTM are registered brands of Microsoft Corporation.
The purpose of this reference manual is to give users the functions for operating and managing
the equipment. The only access level required (Administrator) is protected by a password and
allows one to access these functions in read and write mode for all the user and network
parameters (Login: admin; password: admin).
Configuration of the router by HTTP is described in detail (cf. section 5).
To ease legibility of the reference manual, the term "router" will be used throughout the
document to designate F@stTM 2804v2 equipment.
Guide to symbols used in this manual
Warns you not to do an action, or commit a serious omission.
Gives you important information which you must take into account

F@st™ 2804v2 Reference Manual - 253329475-A
Page 0-2 Sagemcom document. Reproduction and disclosure prohibited
How should the document be used?
This reference manual is organised into sections and annexes. These sections and annexes
cover the following subjects.
Section 1 Presentation of F@stTM 2804v2 equipment
Section 2 Description of F@stTM 2804v2 equipment
Section 3 Installation of F@stTM 2804v2 equipment
Section 4 Configuration of network parameters
Section 5 Configuration of the router by HTTP
Section 6 Description of Internet access service
Section 7 Description of TV over ADSL service
Section 8 Updating the application
Annex A Troubleshooting
Annex B CE compliance declaration
Annex C Environment
Annex D Technical Characteristics
Annex E Default configuration
Annex F Glossary
Annex G Connection technology

F@st™ 2804v2 Reference Manual - 253329475-A
Sagemcom document. Reproduction and disclosure prohibited Page 0-3
Contents
Pages
Guide to symbols used in this manual 0-1
How should the document be used? 0-2
Contents 0-3 to 0-6
List of figures 0-7
1. Introduction 1-1
1.1Presentation 1-2
1.2Composition of router pack 1-4
1.3(Minimum) prerequisites 1-5
2. Description and connection of your router 2-1
2.1Description 2-2
2.1.1 Connectors 2-3
2.1.2 LEDs 2-4
2.2Connecting the ports of your router 2-5
2.3Installing your F@stTM 2804v2 2-6
2.3.1 Powering up 2-6
2.3.2 Connecting the ADSL cable 2-6
2.3.3 Connecting to your computer 2-8
2.3.3.1 Connecting the Ethernet interface of your router to your computer 2-8
2.3.3.2 Connecting the Wi-Fi interface of your router to your computer 2-9
2.3.4 Connecting the Ethernet interface of your router to your TV decoder 2-10
2.4Installation instructions 2-11
3. Installing and configuring the F@stTM 2804v2 router 3-1
4. Configuration of network parameters 4-1
5. Information / Configuration 5-1
5.1Accessing the welcome screen 5-2
5.2Recommendations 5-4
5.3ADSL connection status 5-5
5.4Display frame 5-5

F@st™ 2804v2 Reference Manual - 253329475-A
Page 0-4 Sagemcom document. Reproduction and disclosure prohibited
5.5Status 5-6
5.5.1 Summary 5-6
5.5.2 Diagnostics 5-7
5.6Internet Connection 5-9
5.7Wireless 5-10
5.7.1 Basic 5-10
5.7.1.1 Wireless - Basic 5-11
5.7.1.2 Quick Wireless - Security - Configuration 5-12
5.7.2 Security 5-15
5.7.2.1 Network Authentication 5-17
5.7.3 MAC Filter 5-33
5.7.4 Advanced 5-35
5.7.5 Quality of Service 5-39
5.8NAT 5-42
5.8.1 Port forwarding 5-42
5.8.2 Port Triggering 5-47
5.8.3 DMZ Host 5-50
5.8.4 ALG 5-51
5.9Advanced Setup 5-52
5.9.1 WAN 5-52
5.9.2 LAN 5-78
5.9.2.1 Advanced 5-80
5.9.3 Security 5-83
5.9.3.1 IP Filtering 5-83
5.9.3.2 Block Sites 5-87
5.9.4 Quality of Service 5-89
5.9.4.1 Queue Config 5-91
5.9.4.2 QoS Classification 5-93
5.9.5 Routing 5-98
5.9.5.1 Default Gateway 5-98
5.9.5.2 Static Route 5-99
5.9.5.3 RIP 5-101
5.9.6 DNS 5-103
5.9.6.1 DNS Server 5-103
5.9.6.2 Dynamic DNS 5-104
5.9.7 DSL 5-107
5.9.8 Port Mapping 5-110
5.9.9 Certificate 5-115
5.9.9.1 Local 5-115
5.9.9.2 Trusted CA 5-118
5.10 Advanced Status 5-120
5.10.1 WAN 5-120
5.10.2 Statistics 5-121
5.10.2.1 LAN 5-121
5.10.2.2 WAN 5-122
5.10.2.3 ATM 5-123
5.10.2.4 ADSL 5-124
5.10.3 Route 5-126
5.10.4 ARP 5-127
5.10.5 DHCP 5-128
5.10.6 Station Info 5-129

F@st™ 2804v2 Reference Manual - 253329475-A
Sagemcom document. Reproduction and disclosure prohibited Page 0-5
5.11 Management 5-130
5.11.1 Settings 5-130
5.11.1.1 Backup 5-131
5.11.1.2 Update 5-133
5.11.1.3 Restore Default 5-134
5.11.2 System Log 5-135
5.11.3 SNMP Agent 5-140
5.11.4 TR-069 Client 5-142
5.11.5 Internet Time 5-144
5.11.6 Access Control 5-146
5.11.6.1 Services 5-146
5.11.6.2 IP Address 5-147
5.11.6.3 Passwords 5-149
5.11.7 Update Software 5-150
5.11.8 System Info 5-151
5.11.9 Save/Reboot 5-153
6. Internet access service 6-1
7. TV over ADSL service 7-1
7.1Introduction 7-2
7.2Access to the optional TV over ADSL service 7-2
8. Updating the firmware 8-1
A. Annex A - Troubleshooting A-1
A.1 Checking the assignment of an IP address A-2
A.2 Front panel LEDs A-3
A.3 Supervising your router A-4
A.4 "Diagnostics" tool A-5
A.5 Interpreting the LEDs A-7
A.5.1 The "ADSL" LED blinks slowly A-7
A.5.2 "Wi-Fi" LED off A-7
A.5.3 All LEDs are off A-7
A.6 Restarting your router A-8
A.7 Returning to the factory configuration A-8
A.8 Offline mode A-9
B. Annex B - Warnings for safety B-1
B.1 Warnings for safety B-2
B.1.1 Safety levels in relation to the case B-2
B.2 EC compliance declaration B-2

F@st™ 2804v2 Reference Manual - 253329475-A
Page 0-6 Sagemcom document. Reproduction and disclosure prohibited
C. Annex C - Environment C-1
C.1 Directive E 2002/96/CE C-2
D. Annex D - Technical Characteristics D-1
D.1 Mechanics; Display D-2
D.2 Characteristics of the different interfaces D-3
D.3 Environmental characteristics D-5
D.4 Application and protocols D-6
E. Annex E - Default configuration E-1
E.1 Default username and password E-2
E.2 Default configuration for the local network (LAN) E-2
E.3 Default configuration for the local wireless network (WLAN) E-3
F. Annex F - Glossary F-1
G. Annex G - Connector Technology G-1
G.1 Pinouts of the " ADSL" connector G-2
G.2 Pinouts of the "PWR" connector G-2
G.3 Pinouts of the "ETH1", "ETH2", "ETH3" and "ETH4" connectors G-3
G.4 Pinouts of the "USB" connector G-4

F@st™ 2804v2 Reference Manual - 253329475-A
Sagemcom document. Reproduction and disclosure prohibited Page 0-7
List of figures
Figure 1.1 - Supervising your router.......................................................................................................... 1-2
Figure 2.1 - Overview of case.................................................................................................................... 2-2
Figure 2.2 - Interconnection of ports of F@stTM 2804v2............................................................................ 2-5
Figure 2.3 - ADSL line / Power Supply Connection................................................................................... 2-7

F@st™ 2804v2 Reference Manual - 253329475-A
Page 0-8 Sagemcom document. Reproduction and disclosure prohibited

F@st™ 2804v2 Reference Manual - 253329475-A
Sagemcom document. Reproduction and disclosure prohibited Page 1-1
1. Introduction
This section covers ¾presentation of the F@st™ 2804v2 range § 1.1
¾composition of the packaging § 1.2
¾required hardware and software § 1.3

1 - Introduction
F@st™ 2804v2 Reference Manual - 253329475-A
Page 1-2 Sagemcom document. Reproduction and disclosure prohibited
1.1 Presentation
This reference manual is dedicated to the F@st™ 2804v2 product range. These products are
routers which give users, broadband Internet access from their computer or their games
console by various Ethernet (10 or 100 BASE-T) or Wi-Fi (IEEE 802.11b/g/n) interfaces via an
ADSL/ADSL2/ ADSL2+ network.
Using these interfaces, this router enables you both to surf the Internet and to watch television.
It also lets you telephone over the Internet from an IP SIP telephone linked by Wi-Fi to your
router.
F@st™ 2804v2 products adapt the ADSL function for POTS (UIT G.992.1/3/5 -
Annex A).
Figure 1.1 - Supervising your router

1 - Introduction
F@st™ 2804v2 Reference Manual - 253329475-A
Sagemcom document. Reproduction and disclosure prohibited Page 1-3
Its principal characteristics and functions are as follows:
¾High-performance secure Bridge/Router with ADSL/ADSL2/ADSL2+ interface,
¾User access:
•4 x 10/100BT Ethernet ports,
•1 Wi-Fi port (802.11b/g/n) by mini-PCI,
•1 USB “Master” port.
¾DHCP Client/Server/Relay,
¾DNS Server/ Relay,
¾Access control (FTP/TELNET/HTTP/SSH Client),
¾NAT/PAT router - FTP Compatibility, IRC, Net2Phone, Netbios, DNS, Netmeeting, VPN
passthrough (IPSec, IKE, PPTP, L2TP), CUSeeMe, RealAudio, Microsoft IM and others,
¾Security,
¾Firewall,
¾Spanning tree,
¾Multi-VC ATM and ATM Quality of service (CBR, UBR, VBR),
¾UpnP,
¾TR069,
¾QoS,
¾Upgrade Firmware (Local and Remote),
¾Backup/Restore and Upgrade configuration file (Local and Remote).

1 - Introduction
F@st™ 2804v2 Reference Manual - 253329475-A
Page 1-4 Sagemcom document. Reproduction and disclosure prohibited
1.2 Composition of router pack
The router is supplied in a pack described below:
¾1 F@st™ 2804v2,
¾1 mains adapter unit,
¾1 Gray ADSL RJ11/RJ11 FDT line cord (length = 3 m),
¾1 Yellow Ethernet RJ45/RJ45 linking cord (length = 1.75 m),
¾1 Quick Installation Guide,
¾1 Installation CD-ROM,
¾1 USB Wi-Fi key (optional),
¾1 USB Type A male/Type A female cable (length = 1.5 m) (optional),
¾microfilter(s) (optional),
¾1 filter/splitter (optional).

1 - Introduction
F@st™ 2804v2 Reference Manual - 253329475-A
Sagemcom document. Reproduction and disclosure prohibited Page 1-5
The CD ROM contains:
•the Reference Manual (F@st™ 2804v2) in PDF format file.
•the CE declaration.
Incomplete or damaged supply. If on its receipt the equipment is damaged or
incomplete, contact your supplier.
1.3 (Minimum) prerequisites
Using a router requires a minimum of:
¾a computer equipped with:
•a Wi-Fi 802.11b/g/n interface,
or
•an Ethernet interface (10BASE-T or 10/100BASE-T).
¾a WEB browser (Internet Explorer version 5 or higher recommended).
The minimum configuration of your computer must be:
¾for Windows: Pentium II, 400 MHz, RAM: 128 MB,
¾a monitor of minimum resolution: 1024 x 768.
If you wish to use the Wi-Fi function (standard IEEE 802.11b/g/n), you must have the Wi-Fi
Standard pack (see annex G for use of Wi-Fi).
Before installing the router, we advise you to uninstall any modem or other router
(for example, an ADSL router).

1 - Introduction
F@st™ 2804v2 Reference Manual - 253329475-A
Page 1-6 Sagemcom document. Reproduction and disclosure prohibited

F@st™ 2804v2 Reference Manual - 2533329475-A
Sagemcom document. Reproduction and disclosure prohibited Page 2-1
2. Description and connection
of your router
This section covers ¾the description of your router § 2.1
¾connecting the ports of your router § 2.2
¾installing your router § 2.3
¾installation instructions § 2.4

2 - Description and connection of your router
F@st™ 2804v2 Reference Manual - 2533329475-A
Page 2-2 Sagemcom document. Reproduction and disclosure prohibited
2.1 Description
Figure 2.1 gives an overview of the router (F@stTM 2804v2).
Figure 2.1 - Overview of case
This case consists principally of a lid and a base. Inside is a printed circuit equipped with
electronic components.
The front face of the lid has five display LEDs (see § 2.1.2).
The base has the LED ideograms, manufacturer's logo or the operator's logo.
Below the base is a label on which the product's identification code, series number and barcode
are shown.

2 - Description and connection of your router
F@st™ 2804v2 Reference Manual - 253329475-A
Sagemcom document. Reproduction and disclosure prohibited Page 2-3
2.1.1 Connectors
Marking Meaning
ADSL RJ11 connector - 6 pts. This connector is identified by a grey line on the
base (F@stTM 2804v2).
It is used for the connection to an ADSL line (WAN interface).
ETH1 to ETH4 RJ45 connectors - 8 pts (10/100BASE-T Ethernet Interface). These
connectors are identified by a yellow and a red line on the base.
They are used to connect to a computer or a television set (via a TV/Video
Decoder).
USB “Master” USB type A female connector (USB Interface) used to “Memory
Sharing” and “Printer Sharing”. This connector is identified by a green line
on the base.
RST This button allows the router to be reset to the factory configuration
(see § A.7).
Note: It is in shift compare to the other elements, to prevent an
accidental loss of configuration.
ON On/Off switch.
PWR Miniature jack fixed connector.
This connector enables the router to be supplied with direct current from a
mains adapter unit.

2 - Description and connection of your router
F@st™ 2804v2 Reference Manual - 2533329475-A
Page 2-4 Sagemcom document. Reproduction and disclosure prohibited
2.1.2 LEDs
The different LEDs of the figure above are described in the following table:
LED Status Meaning
Off Power Off
Green Power On - Normal operation
Power
Red Boot failure - Recovery Mode active
Off ADSL function off
Green steady ADSL Showtime
Green blinking Slow ADSL Line not detected
DSL
Green blinking Fast ADSL Training in progress
Off - Power Off
or
- The Internet account must be configured
Green steady The Internet account is configured
Green blinking Tx/Rx traffic
Internet
Red Invalid or unauthorised Internet account
Off Wi-Fi deactivated
Green steady WI-Fi activated
WLAN
Green blinking Wi-Fi Tx/Rx traffic
Off No link detected on the Ethernet port
Green steady Ethernet port has detected a link with a device
ETH
Green blinking Tx/Rx traffic detected on the Ethernet port