Samsung CS34A10 User manual

COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PICTURE IN PICTURE (PIP)
TELETEXT / TELEWEB (OPTION)
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 1

2
ENG
Safety Instructions
◆Do not expose the television to extreme temperature conditions or to extreme humidity conditions.
◆Do not expose the television to direct sunlight and other sources of heat.
◆Do not expose the television to any liquids.
◆Never put objects of any kind into the television, and do not place a water-containing vessel on the
television.
◆During a storm conditions (especially when there is lightning) unplug the television from the mains
socket and aerial.
◆Do not step on or twist the power cord.
◆Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.
◆Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
◆If the television is broken, do not try to repair it yourself. Contact qualified service personnel.
◆If the remote control is not used for a long period of time, remove the batteries and store it in a
cool, dry place.
◆Do not drop the remote control.
This device is not for use in industrial environments.
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 2

3
ENG
Caution
WARNING: TO PREVENT DAMAGE WHICH MAY RESULT
IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRICAL SHOCK,
DO NOT REMOVE REAR COVER, NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lightning flash and arrow head
within the triangle is a warning sign
alerting you of “dangerous voltage”
inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
☛The main voltage is indicated on the
rear of the TV set and the frequency is
50 or 60Hz.
☛EUROPEAN NOTICE
Products with the CE marking comply with the EMC Directive
(89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage
Directive (73/23/EEC) issued by the Commission of the
European Community. Compliance with these directives
implies conformity to the following European Norms:
■EN55022:1998+A1:2000
Radio Frequency Interference
■EN55024:1998
Electromagnetic Immunity
■EN55013:1990
Radio Frequency Interference
■EN55020:1994
Electromagnetic Immunity
■EN61000-3-2:1995
Power Line Harmonics
■EN61000-3-3:1995
Voltage Fluctuations
■EN60065:1997 or EN60095:1998
Product Safety
S58A_UK(02796A-01) 11/5/03 2:20 PM Page 3

4
ENG
Contents
◆FOREWORD
■Safety Instructions ......................................................................................... 2
■Caution .......................................................................................................... 3
◆CONNECTING AND PREPARING YOUR TELEVISION
■Control Panel of Your Television ................................................................... 6
■Connection Panel of Your Television (depending on the model) .................. 7
■Infrared Remote Control (Television Functions)............................................ 8
■Infrared Remote Control (All Functions Except Television Functions) .......... 9
■Inserting the Batteries in the Remote Control................................................ 10
■Connecting to an Aerial or Cable Television Network ................................... 10
■Switching Your Television On and Off........................................................... 11
■Placing Your Television in Standby Mode..................................................... 12
■Becoming Familiar with the Remote Control ................................................. 13
■Plug and Play Feature................................................................................... 14~15
■Choosing Your Language.............................................................................. 15
◆SETTING THE CHANNELS
■Storing Channels Automatically..................................................................... 16
■Storing Channels Manually............................................................................ 17~18
■Skipping Unwanted Channels ....................................................................... 19
■Sorting the Stored Channels ......................................................................... 20
■Assigning Names to Channels ...................................................................... 21
■Using the LNA (Low Noise Amplifier) Feature .............................................. 22
■Activating the Child Lock ............................................................................... 23
■Fine Tuning Channel Reception.................................................................... 24
■Displaying Information ................................................................................... 24
◆USING YOUR TELEVISION
■Changing the Picture Standard ..................................................................... 25
■Adjusting the Picture Settings........................................................................ 25
■Viewing the Picture In Picture (PIP) .............................................................. 26~27
■Selecting the Picture Size (depending on the model).................................... 28
■Extra Picture Settings .................................................................................... 29
-
Scan Mode
- Digital NR
- DNIe (Digital Natural Image engine)
-
Blue Screen
- Tilt
■Changing the Sound Standard ...................................................................... 30
■Adjusting the Sound Settings ........................................................................ 30
■Adjusting Your Headphone Preferences ....................................................... 31
■Setting the Dolby Digital ................................................................................ 32~33
■Setting the Dolby Prologic II.......................................................................... 34~35
■Setting the External Digital Sound................................................................. 36
■Selecting the Sound Mode (depending on the model) .................................. 37
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 4

5
ENG
Contents (continued)
◆USING YOUR TELEVISION (continued)
■Setting the Current Date and Time................................................................ 38
■Setting the Sleep Timer ................................................................................. 39
■Switching the Television On and Off Automatically ....................................... 40
■Redirecting an Input to the External Output .................................................. 41
■Viewing Pictures From External Sources ...................................................... 41
◆USING THE TELEWEB FEATURE (depending on the model)
■TeleWeb Feature(depending on the model).................................................. 42~43
■Using the TeleWeb Menu after Displaying the TeleWeb
(depending on the model).............................................................................. 44
■Easy Accessing the TeleWeb Service via the Remote Control
(depending on the model).............................................................................. 45
◆USING THE DVR FEATURE(depending on the model)
■DVR (Digital Video Recorder) Feature(depending on the model) ................. 46~47
■Setting up the DVR(depending on the model)............................................... 48
■Easy Accessing the DVR Feature via the Remote Control
(depending on the model).............................................................................. 49
◆USING THE TELETEXT FEATURE
■Teletext Feature ............................................................................................ 50
■Displaying the Teletext Information ............................................................... 51
■Selecting Display Options.............................................................................. 52
■Selecting the Teletext Source(depending on the model)............................. 53
■Selecting a Teletext Page.............................................................................. 54
◆ADDITIONAL INFORMATION ON CONNECTIONS
■Connecting to the External Input/Outputs...................................................... 55
■Connecting to the DVD Input......................................................................... 55
■Connecting to the Audio Outputs................................................................... 56
■Connecting to the Digital Audio Inputs .......................................................... 56
■Connecting Headphones............................................................................... 57
■Connecting Additional Speakers ................................................................... 57
■Connecting to the Audio/Video Input............................................................. 58
■Connecting to the S-Video Input.................................................................... 58
■Connecting to the PC Input ........................................................................... 59
◆RECOMMENDATIONS FOR USE
■Programming the Remote Control for Other Components ............................ 60
-VCR Remote Control Codes ...................................................................... 61
-Cable Box (CATV) Remote Control Codes ................................................ 62
-DVD Remote Control Codes ...................................................................... 62
■SCART Connector Wiring (EXT1, EXT2 or EXT3) ........................................ 63
■Wiring the Mains Power Supply Plug (UK Only)............................................ 63
■Troubleshooting: Before Contacting Service Personnel................................ 64
☛➢
Press Important Note
Symbols
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 5

6
ENG
Control Panel of Your Television
2
3
4
5
6
9
87
2
13456
9
9
8
8
7
2
1
1
3
4
5
6
➢Using the Buttons on the Panel
If the remote control no longer works or you have lost it, you can use controls on the panel of
the TV to:
◆Switch on the TV when it is in Standby mode and select channels ( ▲C/P. ▼ )
◆Adjust the volume ( +
- )
◆Access the menu ( MENU )
◆Switch among Video input modes ( TV/VIDEO ) and access to the selected option on
the menu system ( ENTER )
➢
The actual configuration on your TV may be different, depending on
your model.
WS32Z10
CS34A10
WS32Z7
!!
Input Source Selection/
Accessing to the Selected Option on the
Menu System
@@
Menu Display
##
Volume Decrease
$$
Volume Increase
%%
Previous Channel
^^
Next Channel
&&Standby & Timer Indicator
**
Remote Control Sensor
((Power On/Off
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 6

7
ENG
Connection Panel of Your Television (depending on the model)
Audio Input (R, L)
Video Input
S-Video Input
Headphone connector
PC Input
Rear of the TV
Side of the TV
➢For further details about connection, refer to pages 55~59.
☛Whenever you connect an audio or video system to your television, ensure that all
elements are switched off.
Refer to the documentation supplied with your equipment for detailed connection
instructions and associated safety precautions.
➢
The actual configuration on your TV may be different, depending on
your model.
S58A_UK(02796A-01) 11/5/03 1:23 PM Page 7

8
ENG
Infrared Remote Control (Television Functions)
➢The performance of the remote control may be affected by bright light.
TELEVISION STAND-BY
MAKE THE REMOTE CONTROL WORK FOR
TV, VCR, CATV, DVD, STB.
➢The remote control might not be
compatible with the TV manufactured by
another company.
NEXT CHANNEL
EXTERNAL INPUT SELECTION
PREVIOUS CHANNEL
INFORMATION DISPLAY
EXIT FROM MENU DISPLAY/
TUNER/CABLE NETWORK
SELECTION
CHANGE CONFIRMATION
PICTURE EFFECT SELECTION
SOUND MODE SELECTION
DNIe ON/OFF
INITIALIZE THE REMOTE CONTROL
SETTINGS WHEN IT HAS SOME
PROBLEMS OR DOESN'T WORK WELL
➢Please take off the batteries while
resetting. If not so, the remote control
will get damaged
AUTOMATIC SWITCH-OFF
DOLBY PROLOGIC MODE
SELECTION
DIRECT CHANNEL SELECTION
PICTURE FREEZE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
MENU DISPLAY
CONTROL THE CURSOR IN THE
MENU
SOUND EFFECT SELECTION
PICTURE SIZE SELECTION
SET THE MBR CODE OF REMOTE
CONTROL FOR THE PRODUCTS
EXCEPT SAMSUNG PRODUCT
(REFER TO PAGES 60~62)
VOLUME INCREASE
S58A_UK(02796A-01) 11/4/03 5:24 PM Page 8

9
Infrared Remote Control (All Functions Except Television Functions)
ENG
SUB PICTURE (PIP) FREEZE
SUB PICTURE (PIP) NEXT CHANNEL
TELETEXT INDEX
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION AND
THE NORMAL BROADCAST
SUB PICTURE (PIP) LOCATION
SELECTION
TELEWEB DISPLAY
DVR SETUP MENU DISPLAY
TELETEXT SUB PAGE/
TELEWEB HOME PAGE
VCR, DVD, DVR OR STB FUNCTIONS:
- REWIND
- STOP
- PLAY/PAUSE
- FAST FORWARD
TELETEXT SIZE SELECTION
PIP ON/OFF
TELETEXT NEXT PAGE/
TELEWEB FORWARD
TELETEXT PREVIOUS PAGE/
TELEWEB BACKWARD
TELETEXT REVEAL
SUB PICTURE (PIP) SIZE SELECTION
SUB PICTURE (PIP) PREVIOUS
CHANNEL
FASTEXT TOPIC SELECTION
TELETEXT CANCEL
DVR FUNCTIONS;
(REFER TO PAGES 46~49)
S58A_UK(02796A-01) 11/4/03 5:24 PM Page 9

10
ENG
You must insert or replace the batteries in the remote control when
you:
◆Purchase the television
◆Find that the remote control is no longer operating
correctly
1Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆
+ on the battery against + on the remote control
◆
- on the battery against - on the remote control
3Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆An outdoor aerial
◆A cable television network
◆A satellite network
1In the first three cases, connect the aerial or network input cable to
the 75Ωcoaxial socket on the rear of the television.
2If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆“Storing Channels Automatically” on page 16
◆“Storing Channels Manually” on page 17
Inserting the Batteries in the Remote Control
Rear of the TV
Cable Television
Network
or
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 10

11
The mains lead is attached to the rear of your television.
☛If you have purchased this television in the United
Kingdom, refer to page 63 for further instructions on
plug wiring.
1Plug the mains lead into an appropriate socket.
➢The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2Press the “ ” button (On/Off) on the front of the television.
Result:The Standby indicator on the front of the television
lights up.
3Press the POWER ( ) button on the remote control to switch the
television on.
Result:The programme that you were watching last is re-
selected automatically.
➢If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
16 or “Storing Channels Manually” on page 17.
4To switch your television off, press again the “ ” button (On/Off)
on the front of the television.
➢If your television isn’t turned on when the “ ” button
(On/Off) is pressed, press the SELECT button to check if
the “TV” mode has been chosen.
Switching Your Television On and Off
ENG
Front of the TV
TV
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 11

12
ENG
Your television can be placed in Standby mode, in order to reduce
the power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1Press the POWER ( ) button on the remote control.
Result:The screen is turned off and the Standby indicator on
the front of the television lights up.
2To switch the television back on, simply press again the
POWER ( ) button on the remote control.
☛Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ ”
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
Placing Your Television in Standby Mode
TV
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 12

13
The remote control is used mainly to:
◆Change channels and adjust the volume
◆Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
Used to display the next -
stored channel.
Used to display the
-
previous stored channel.
to Used to display the corresponding channels.
Used to increase the -
volume.
Used to decrease the
-
volume.
MUTE Used to switch the sound off temporarily.
➢To turn the sound back on, press this button again,
or press the or button.
MENU Used to display the Used to return to the
on-screen menu system. previous menu or normal
viewing.
- Used to...
◆Display a submenu
containing selections for
the current menu option.
◆Increase/reduce a menu
option value.
- Used to confirm your
choice.
EXIT/TV Used to switch the Used to exit from the menu
television on when it is system and return to
in Standby mode. normal viewing directly.
Becoming Familiar with the Remote Control
ENG
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 13

14
ENG
When the television is initially powered on, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
1If the television is in Standby mode, press the POWER ( ) button
on the remote control.
Result:The Plug & Play is displayed.
2To start the Plug & Play, press the ENTER( ) button.
Result:The Language menu is displayed.
3Select the appropriate language by pressing the †or …button.
Press the ENTER( ) button to confirm your choice.
Result:The message Antenna input check is displayed.
4Make sure that the antenna is connected to the TV.
Result:After a little while, the Country menu is displayed.
5Select your country by pressing the ▲or ▼button. Press the
ENTER( ) button to confirm your choice.
Result:The ATM menu is displayed.
6To start the channel store, press the ENTER( ) button.
Result:The search will end automatically. Channels are sorted
and stored in an order which reflects their position in the
frequency range (with lowest first and hialghest last).
➢To stop the search before it has finished or return to normal
viewing, select the Exit and press the ENTER( ) button.
7When the setting has finished all, the message Enjoy viewing
your new TV is displayed, and then the channel which has been
stored will be activated.
Plug and Play Feature
Plug & Play
Start Exit
Press ENTER to start
Plug & Play.
English
ЬА
Hrvatski
Čeština
Netherland
Français
Language
Move Enter
Austria
Belgium
Croatia
Denmark
Finland
France
Germany
Country
Move Enter
Plug & Play
Antenna input check
Sort
Enjoy viewing your new TV
Press ENTER to start
channel store. P
-----
ATM
Start Exit
Channel store
in process. P
-----
108MHz
ATM
Stop Exit
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 14

15
If you want to reset this feature...
1Press the MENU( ) button.
Result:The main menu is displayed.
2Press the †or …button to select Setup.
Result:The options available in the Setup group are
displayed.
3Press the ENTER( ) button.
Result:The Plug & Play is selected.
4Press the ENTER( ) button again.
Result:This feature starts with the message Plug & Play is
displayed.
Plug and Play Feature
ENG
Plug & Play √√
Language : English √√
Time √√
Teletext Source : Main √√
AV Setup √√
Setup
Move Enter Return
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1Press the MENU( ) button.
Result:The main menu is displayed.
2Press the †or …button to select Setup.
Result:The options available in the Setup group are
displayed.
3Press the ENTER( ) button. †
4Press the †or …button to select Language. Press the
ENTER( ) button.
Result:The languages available are listed.
5Press the †or …button to select the appropriate language.
Plug & Play √√
Language : English √√
Time √√
Teletext Source : Main √√
AV Setup √√
Setup
Move Enter Return
English
ЬА
Hrvatski
Čeština
Nederland
Français
†
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 15

16
ENG
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
1Press the MENU( ) button.
Result:The main menu is displayed.
2Press the †or …button to select Channel.
Result:The options available in the Channel group are
displayed.
3Press the ENTER( ) button.
Result:The Country is selected.
4Press the ENTER( ) button again. Select your country by
pressing the †or …button.
The countries are displayed in the following order:
Austria
- Belgium - Croatia - Denmark - Finland - France -
Germany - Iceland - Ireland - Italy - Netherlands - Norway
- Poland - Spain - Sweden - Swizerland - Turkey - United
Kingdom
- Others - East europe.
➢If you have selected the Others option but do not wish to
scan the PAL frequency range, store the channels manually
(see page 17).
5Press the ENTER( ) button to confirm your country selected.
6Press the †or …button to select ATM. Press the ENTER( )
button.
7Press the ENTER( ) button again to start the search.
Result:The channels are stored in an order which reflects
their positions in the frequency range. Finally, the
search will end automatically.
➢To stop the search before it has finished or return to normal
viewing, select the Exit and press the ENTER( ) button.
8When the channels have been stored, you can:
◆ Clear a channel (refer to page 19)
◆ Sort them in the order required (refer to page 20)
◆ Assign a name to the stored channels (refer to page 21)
◆ Fine tune channel reception if necessary (refer to page 24)
Storing Channels Automatically
Country : Austria √√
ATM √√
Manual Store √√
Channel Edit √√
Fine tune √√
Channel
Move Enter Return
Country : Austria √√
ATM √√
Manual Store √√
Channel Edit √√
Fine tune √√
Channel
Move Enter Return
Austria
Belgium
Croatia
Denmark
Finland
France
†
Press ENTER to start
channel store. P
----
-
ATM
Start Exit
Channel store
in process. P
-----
108MHz
ATM
Stop Exit
Channel store
is not completed. P
-----
108MHz
ATM
Continue Exit
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 16

17
You can store the television channels, including those received via
cable networks.
When storing channels manually, you can choose:
◆Whether or not to store each of the channels found
◆The programme number of each stored channel which
you wish to identify
1Press the MENU( ) button.
Result:The main menu is displayed.
2Press the †or …button to select Channel.
Result:The options available in the Channel group are
displayed.
3Press the ENTER( ) button.
4Press the †or …button to select Manual Store. Press the
ENTER( ) button.
Result:The
current channels are displayed.
5Select required channel by pressing the †or …button. Press the
ENTER( ) button.
Result:The Manual Store menu is displayed with the
Prog.No is selected.
6To assign a programme number to a channel, press the †or …
button to find the correct number.
7If necessary, select the broadcasting standard required. Press the
œor √button to select Color. Press the †or …button
repeatedly.
Result:The color standards are displayed in the following
order (depending on the model).
◆AUTO
- PAL - SECAM
◆AUTO
- NTSC3.58 - NTSC4.43 - PAL60
8Press the œor √button to select Sound. Press the †or …button
repeatedly.
Result:The sound standards are displayed in the following
order (depending on the model).
◆BG
- DK - I - M
◆BG
- DK - I - L
Storing Channels Manually
ENG
Country : Austria √√
ATM √√
Manual Store √√
Channel Edit √√
Fine tune √√
Channel
Move Enter Return
Manual Store
Move Adjust Return
Prog. No Color Sound
--
AUTO BG
Channel Search Store
C
--
887MHz ?
Manual Store
Move Adjust Return
Prog. No Color Sound
--
AUTO BG
Channel Search Store
C
--
887MHz ?
Manual Store
Move Adjust Return
Prog. No Color Sound
--
AUTO BG
Channel Search Store
C
--
887MHz ?
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 17

18
ENG
9If you know the number of the channel to be stored, see the
following steps.
◆ Press the œor √button to select Channel.
◆ Press the †or …button to select C(Air channel) or S(Cable
channel).
◆ Press the √button
◆ Press the numeric buttons (0~9) to select the required
number. (The input range for numeric buttons may vary within
different regions.)
➢If no sound or abnormal sound, re-select the sound
standard required.
10 If you do not know the channel numbers, select Search by
pressing the œor √button. Press the †or …button to start the
search.
Result:The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
11 To store the channel and associated programme number, select
Store by pressing the œor √button. Set to OK by pressing the †
or …button.
12 Repeat Steps 9to 11 for each channel to be stored.
☛Channel mode
◆P(Programme mode):
When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
◆C(Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
◆S(Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
Storing Channels Manually (continued)
Manual Store
Move Adjust Return
Prog. No Color Sound
--
AUTO BG
Channel Search Store
C
--
887MHz ?
Manual Store
Move Adjust Return
Prog. No Color Sound
--
AUTO BG
Channel Search Store
C
--
887MHz ?
Manual Store
Move Adjust Return
Prog. No Color Sound
--
AUTO BG
Channel Search Store
C
--
887MHz ?
Manual Store
Move Adjust Return
Prog. No Color Sound
--
AUTO BG
Channel Search Store
C
--
887MHz OK
0 .. 9
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 18

19
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those that
you have chosen to skip are thus not displayed. All channels that
you do not specifically choose to skip are displayed during
scanning.
1Press the MENU( ) button.
Result:The main menu is displayed.
2Press the †or …button to select Channel.
Result:The options available in the Channel group are
displayed.
3Press the ENTER( ) button.
4Press the †or …button to select Channel Edit. Press the
ENTER( ) button.
Result:The Channel Edit menu is displayed with the
Add/Delete selected.
5Press the ENTER( ) button again.
Result:The current channels are displayed.
6Select the channel that you wish to delete by pressing the †or …
button. Press the ENTER( ) button.
7Select Erased or Added by pressing the †or …button. Press
the ENTER( ) button.
Skipping Unwanted Channels
ENG
Country : Austria √√
ATM √√
Manual Store √√
Channel Edit √√
Fine tune √√
Channel
Move Enter Return
Add/Delete √√
Sort √√
Name √√
LNA √√
Child Lock √√
Channel Edit
Move Enter Return
Add/Delete
Move Enter Return
1 ✽
2 ✽
3 ✽ Added
4
✽
5 ✽
Prog. No
Add/Delete
Move Enter Return
1 ✽
2 ✽
3 ✽ Erased
4
✽
5 ✽
Prog. No
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 19

20
ENG
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
1Press the MENU( ) button.
Result:The main menu is displayed.
2Press the †or …button to select Channel.
Result:The options available in the Channel group are
displayed.
3Press the ENTER( ) button.
4Press the †or …button to select Channel Edit. Press the
ENTER( ) button.
Result:The Channel Edit menu is displayed.
5Press the †or …button to select Sort. Press the ENTER( )
button.
Result:The current channels are displayed.
6Select the channel that you wish to move by pressing the †or …
button. Press the ENTER( ) button.
7Select the number of the programme to which the channel is to be
moved by pressing the †or …button. Press the ENTER( )
button.
Result:The channel is moved to its new position and all other
channels are shifted accordingly.
8Repeat Steps 6to 7until you have moved all the channels to the
required programme numbers.
Sorting the Stored Channels
Country : Austria √√
ATM √√
Manual Store √√
Channel Edit √√
Fine tune √√
Channel
Move Enter Return
Add/Delete √√
Sort √√
Name √√
LNA √√
Child Lock √√
Channel Edit
Move Enter Return
Sort
Move Enter Return
1 ✽
2 ✽
3 ✽
4 ✽
5 ✽
Prog. No
Sort
Move Enter Return
1 ✽
2 ✽
3 ✽
4 ✽
5 ✽
Prog. No
S58A_UK(02796A-01) 10/30/03 10:16 PM Page 20