Samsung DIGIMAX A6 User manual

6806-2249
SAMSUNG TECHWIN CO., LTD.
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,
SUNGNAM-CITY, KYUNGKI-DO, KOREA
462-121
TEL : [phone],8088, 8090, 8092, 8099
FAX : [phone], 8111
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
HEADQUARTERS
40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A.
TEL : [phone]
FAX : [phone]
WESTERN REGIONAL OFFICE
18600 BROADWICK ST.,
RANCHO DOMINGUEZ, CA 90220, U.S.A.
TEL : [phone]
FAX : [phone]
SAMSUNG OPTO-ELECTRONICS UK LIMITED
SAMSUNG HOUSE
1000 HILLSWOOD DRIVE
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : [phone]
FAX : [phone]
SAMSUNG OPTO-ELECTRONICS GMBH
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS., GERMANY
TEL : [phone]
FAX : [phone]
SAMSUNG FRANCE S.A.S.
BP 51 TOUR MAINE MONTPARNASSE
33, AV .DU MAINE
75755, PARIS CEDEX 15, FRANCE
HOTLINE PHOTO NUMÉRIQUE :
00 800 22 26 37 27(Numéro Vert-Appel Gratuit)
TEL : [phone]
FAX : [phone]
SAMSUNG TECHWIN MOSCOW OFFICE
RUSSIA, 125167, MOSCOW LENNINGRADSKY,
PR-KT, 37-A, KORP14
TEL : [phone]
FAX : [phone]
http://www.samsungcamera.ru
TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.
7 PINGCHANG ROAD NANKAI DIST., TIANJIN
P.R CHINA
POST CODE:300190
TEL : [phone]
FAX : [phone]
Internet address - http : //www.samsungcamera.com/
The CE Mark is a Directive conformity
mark of the European Community (EC)
Thank you for buying a Samsung Camera.
This manual will guide you through using the camera, including capturing images, downloading images and
using the application software. Please read this manual carefully before using your new camera.
Figures (Images) used for the manual are based on model Digimax A6.
ENGLISH
Digimax A63
User's Manual

2
Instructions
Use this camera in the following order
Insert the
USB cable
Set up the
camera driver
Before connecting the camera to a PC, via the
USB cable, you will need to set up the camera
driver. Install the camera driver that is contained in
the Application S/W CD-ROM.(p.97)
Take a picture (p.21)
Insert the supplied USB cable into the PC’s USB
port and the camera’s USB connection
terminal.(p.105)
Check the camera’s power. If the power is turned
off, press the camera button to turn on.
Take a picture
Check the
camera’s power
Check
[Removable Disk]
Open Window s EXPLORER and search for
[Removable Disk].(p.106)
If you use a card reader to copy the images on the memory card to your PC, the images
could be damaged. When transferring the images taken with the camera to your PC, be sure
to use the supplied USB cable to connect the camera to your PC. Please note that the
manufacturer holds no responsibility for loss or damage of images on the memory card due
to the use of a card reader.

3
Contents
Getting to know your camera 5
About the icons 5
Danger 6
Warning 6
Caution 7
An FCC warning 7
This digital camera can be used for 8
Manufacturer's contents 10
Identification of features 11
Front & Top 11
Back & Bottom 11
Side/ 5-function button 12
Mode dial 12
Connecting to a Power Source 15
Using the AC power adapter (3.3V 2.0A) 15
Using the batteries 16
Instructions on how to use the
memory card 17
Maintenance of the memory card 17
Preserving the memory card data 17
Inserting the memory card 19
Removing the memory card 19
LCD monitor indicator 20
Starting the recording mode 21
How to use the AUTO mode 21
How to use the PROGRAM mode 22
How to use the AS mode 22
How to use the M mode 23
How to use the VOICE RECORDING
mode 23
How to use the MOVIE CLIP mode 24
Pausing while recording a movie clip
(Successive Recording) 24
NIGHT SCENE mode 25
How to use the SCENE mode 25
Things to Watch Out for When Taking
Pictures 26
Using the camera buttons to adjust the
camera 27
POWER button 27
SHUTTER button 27
ZOOM W/T button 27
Voice memo/ UP button 29
Macro/ Down button (Focusing) 30
Focus lock 31
FLASH/ LEFT button 32
Self-timer/ Right button 34
MENU/ OK button 35
+/- button 36
ASM button(Manual &
Scene mode button) 39
LCD button 41
Using the LCD monitor to adjust the camera
settings 42
How to use the menu 44
Size 44
Quality 45
Metering 46
Continuous shot 46
Effect 47
Sharpness 48
Save / Load the camera configuration
(MYSET) 49
Scene 50
Starting play mode 51
Playing back a still image 51
Playing back a movie clip 52
Playing back a recorded voice 52
READY
RECORDING
PLAY

4
Contents
LCD monitor indicator 53
Using the camera buttons to adjust the
camera 54
Thumbnail/ Enlargement button 54
Voice memo / Up button 55
Play & Pause/ Down button 56
LEFT/ RIGHT/ MENU/ OK button 57
LCD button 57
Delete button 58
Setting up the play back function using the
LCD monitor 59
Starting the slide show 62
Rotating an image 63
Resize 64
Protecting images 65
Deleting all images 66
DPOF 66
DPOF : STANDARD 67
DPOF : INDEX 67
DPOF : PRINT SIZE 68
DPOF : CANCEL 68
COPY TO CARD 69
PictBridge 70
PictBridge: Picture Selection 71
PictBridge: Printing 72
PictBridge: Print Setting 73
PictBridge : RESET 74
Setup menu 75
File name 76
Auto power off 77
Language 78
Formatting a memory card 79
Setting up the Date/ Time 80
Date type 80
Imprinting the recording date 81
Function lamp 81
Sound 82
Selecting an External Device (USB) 83
LCD brightness 83
Quick view 84
Initialization(RESET ALL) 84
Setting up the MYCAM menu 85
Start up image 85
Shutter sound 86
Start up sound 86
Important notes 87
Warning indicator 89
Before contacting a service center 90
Specifications 93
Software Notes 95
System Requirements 95
About the software 96
Setting up the application software 97
Starting PC Mode 105
Removing the USB Driver for
Windows 98SE 108
Removable Disk 109
Removing the removable disk 110
Setting up the USB Driver for MAC 111
Using the USB Driver for MAC 111
Digimax Viewer 2.1 112
Using PhotoImpression 113
Digimax Reader 114
FAQ 116
SOFTWARE
SETUP

5
Getting to know your camera
Thank you for buying a Samsung Digital Camera.
Prior to using this camera, please read the user manual thoroughly.
When you require After Sales service, please bring the camera and the cause of the camera
malfunction (such as Batteries, Memory card etc.) to the A/S center.
Please check that the camera is operating properly prior to when you intend to use it
(e.g. for a trip or an important event) to avoid disappointment. Samsung camera takes no
responsibility for any loss or damages that may result from camera malfunction.
Keep the manual in a safe place.
Microsoft, Windows and Windows logo are registered trademarks of Microsoft Corporation
incorporated in the United States and/or other countries.
All brand and product names appearing in this manual are registered trademarks of their
respective companies.
This manual contains instructions on using this camera that will help you to use this camera
safely and correctly. This will help prevent danger and injury to others.
About the icons
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation, which, if not avoided, may
result in a minor or moderate injury.

6
Danger
Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock
or severe damage to you or your camera. Internal inspection, maintenance and repairs
should be carried out by your dealer or Samsung Camera Service Center.
Please do not use this product in close proximity to flammable or explosive gases, as this
could increase the risk of explosion.
Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the
camera, and then disconnect the power source (batteries or AC Power Adapter).
You must contact your dealer or Samsung Camera Service Center.
Do not continue to use the camera as this may cause a fire or electric shock.
Do not insert or drop metallic or inflammable foreign objects into the camera through access
points e.g. the memory card slot and battery chamber.
This may cause a fire or electric shock.
Do not operate this camera with wet hands. This could pose a risk of electric shock.
Do not use the flash in close proximity to people or animals.
Positioning the flash too close to your subject’s eyes, may cause eyesight damage.
When taking photographs, never point the lens of the camera directly into very strong light.
This may result in permanent damage to your eyesight.
For safety reasons keep this product and accessories out of reach of children or animals to
prevent accidents e.g.:
Swallowing batteries or small camera accessories. If an accident should occur, please
consult a doctor immediately.
There is the possibility of injury from the camera’s moving parts.
Batteries and camera may become hot during prolonged use and it may result in camera
malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it
time to cool.
Do not recharge non rechargeable batteries. This may cause an explosion.
Do not leave this camera in places subject to extremely high temperatures, such as a sealed
vehicle, direct sunlight or other places of extreme variances in temperature.
Exposure to extreme temperatures may adversely affect the camera s internal components
and could cause a fire.
When in use, do not cover the camera or AC Power Adapter.
This may cause heat to build up and distort the camera body or cause a fire.
Always use the camera and its accessories in a well-ventilated area.
Warning

7
Caution
Leaking, overheating, or burst batteries could result in fire or injury.
Use batteries with the correct specification for the camera.
Do not short circuit, heat or dispose of batteries in fire.
Do not insert the batteries with the reverse polarities.
Remove the batteries when not planning to use the camera for a long period of time.
Batteries may leak corrosive electrolyte and irreparably damage the camera's components.
Do not fire the flash while it is in contact with hands or objects.
Do not touch the flash after using it continuously. It may cause burns.
Do not move the camera while it is switched on, if you are using the AC Power Adapter.
After use, always switch off the camera before unplugging the adapter from the wall socket.
Then make sure that any connector cords or cables to other devices are disconnected before
moving the camera. Failure to do so may damage the cords or cables and cause a fire or
electric shock.
An FCC warning
This device has been tested in accordance with the limits of a class B digital device
under item 15 of the FCC rules. These limits are designed to provide protection
against harmful interference in commercial installation. This equipment generates,
absorbs and can emit radio frequency energy. If it is not installed and used in
accordance with the instructions, it may cause harmful interference to radio
communication.
There is however, no guarantee that interference will not occur in some situations.
Should any interference occur when this device is in operation, please try one or
more of the following measures.
Change the location and direction of any aerial.
Increase distance between the camera and the affected device.
Use a different socket away from the affected device.
Please contact a Samsung agent or a radio/TV engineer.
This device complies with part 15 of the FCC Rules.
Changes or modifications not expressly approved by the party responsible for
compliance could void user's authority to operate the equipment.

8
This digital camera can be used for
Printing images using a dedicated
printer, DPOF and PictBridge compatible
printer or a DPOF-equipped photo lab.
(refer to page 66~74)
Down loading image files
from camera to computer.
(refer to page 106)
Editing images on a PC.
(refer to page 113)
Taking a picture.
(refer to page 21)

9
This digital camera can be used for
Inserting images directly into any
electronic document.
Taking a favourite image and creating
your own personalized calendar with it.
You can even create your own unique gift wrap
paper by using your digital images.
Creation of a digital photo album.
Recording your voice.
(refer to page 23)
Recording a movie clip.
(refer to page 24)

10
Manufacturer's contents
Please check that you have the correct contents before using this product.
marked contents are optional.
Digital Camera Camera strapUSB cablePouch
User manual SD memory cardSoftware CDProduct warranty
2 AA Alkaline
Batteries
AC adapter
(SAC-32, 3.3V)
Battery
charger
Rechargeable
battery AC cord
Battery
charger
Rechargeable
battery AC cord
Digimax Battery I-Pack : SNB-2312 KIT Digimax Battery I-Pack : SBP-1303 KIT

11
Identification of features
Front & Top
Back & Bottom
* When using the digital zoom to take a picture, the composition of the picture may be different
depending on whether you are using the LCD monitor or the viewfinder. The picture will be
taken in the composition of the picture as it appears on the LCD monitor.
Viewfinder
Flash indicator lamp(Red)
Mode dial
Autofocus indicator lamp(Green)
Zoom W button
(Thumbnail)
LCD button
Zoom T button
(Digital zoom)
5-function button
Tripod socket ASM (Manual & Scene mode) button
Play mode button
DC input connection port
USB connection
port
LCD monitor
+/-, DELETE
button
Shutter button Power button
Microphone
Mirror for self
portrait
Speaker
Lens
Mode dial
Viewfinder
Flash
Function lamp

12
Identification of features
PROGRAM mode
Please select this mode for quick and easy picture taking
with minimal user interaction.
Selecting the automatic mode will configure the camera with
optimal settings. You can still manually configure all
functions except the iris and shutter speed.
AUTO mode
You can select the desired working mode by using the mode dial located on the top of the
camera. This digital camera has 8 recording modes. These are listed below.
Side/ 5-function button
Mode dial
Battery chamber
Memory card slot
Battery chamber cover
FLASH/
LEFT button
MENU/
OK button
MACRO / DOWN button
SELF-
TIMER/
RIGHT
button
Voice memo/ UP button

13
Identification of features
Aperture priority/ Shutter priority mode
The Aperture and Shutter can be set manually in the AS
mode.
AS mode
Manual mode
The Aperture value, Shutter speed and various functions can
be set manually in this mode.
M mode
A voice recording can be recorded for as long as the available
recording time of the memory capacity allows.(Max : 1 hour)
- Voice recording file type : *.wav
VOICE RECORDING mode
A movie clip can be recorded for as long as the available
recording time of the memory capacity allows.
- Image size : 640X480, 320X240, 160X120(user selectable)
- Movie clip file type : *.avi
MOVIE CLIP mode
Use the menu to easily configure optimal settings for a variety
of shooting situations including portrait, children, landscape,
text recognition, close-up, sunset, dawn, backlight, fireworks,
beach scenes, and snowscape.
SCENE mode
This mode is used at night or against a dark background.
NIGHT SCENE mode

14
Identification of features
Function lamp& Self-timer lamp
Function Description
For the first 7 seconds, the lamp blinks at 1 second intervals.
For the final 3 seconds, the lamp blinks quickly at 0.25-second intervals.
*The lamp will function while using the self-timer even if the configuration
is set to off the lamp.(Based on 10-second Self-timer; see p. 34)
Function lamp blinks and then turns off when the camera is ready to take
a picture
Function lamp blinks once
Function lamp blinks at a 1-second interval
MODE
Icon
Icon
MODE
SCENE
AUTO
PROGRAM AS
M
VOICE RECORDING
MOVIE CLIP
NIGHT SCENE
PLAY
CHILDREN
Mode icons
LANDSCAPE CLOSE UP TEXT PORTRAIT SUNSET DAWN BACKLIGHT
FIREWORKS
BEACH&
SNOW
Color Status Camera Status
Blinking
Recording Mode (lightly press the shutter button): Not focused
PC Mode: Transmitting Data
Recording Mode (lightly press the shutter button): Focused.
On
Green
Color Status Camera Status
Blinking
Flash in the process of charging
Flash ready
On
Red
Auto focus indicator lamp
Flash indicator lamp
Color Status Camera Status
On
Turned off the LCD with the LCD button.
PC Mode: When the USB cable is inserted.
Green
Mode dial lamp
While the self timer is
functioning
Power on
After taking a picture
While movie recording
While voice recording.

15
Connecting to a Power Source
Important information about battery usage
It is easy to buy alkaline batteries. However, the duration for using batteries varies in
accordance with the battery manufacturer or the photographic conditions.
When the camera is not used, turn off the camera power.
Do not recharge the non rechargeable batteries. It may cause an explosion.
Please remove the batteries if the camera will not be used for long periods. Batteries can
lose power over time and are prone to leaking if kept inside the camera.
We recommend high capacity ALKALINE batteries as manganese batteries cannot
deliver sufficient power.
Low temperatures (below 0 ) can affect the performance of the batteries and you may
experience reduced battery life.
Batteries will usually recover at normal temperatures.
Do not use old and new batteries at the same time.
During extended use of the camera, the camera body may become warm.
This is perfectly normal.
INFORMATION
If you have access to a mains supply, using an AC
Adapter (3.3V 2.0A) allows the camera to be used for
long periods of time.
Plug the adapter into the connection point (DC IN
3.3V) on the camera.
Remove the batteries from the camera when using an
AC adapter.
Using the AC power adapter (3.3V 2.0A)
There are two ways in which to provide the camera with power. You can use batteries or
alternatively, you can use an AC(100 ~ 250V) Adapter (DC 3.3V 2.0A).
We recommend using batteries for a digital camera (Within a year from the date of
manufacture). The batteries are listed below.
Non rechargeable batteries : AA type - Alkaline, Ni-Mn, Ni-Zn, Lithium
CR-V3 type - Lithium
Rechargeable batteries : AA type - Ni-MH(Samsung SNB-2312 recommended)
Ni-Cd(over 1000mAh)
CR-V3 type - Samsung SBP-1303(Lithium Ion battery)

16
Connecting to a Power Source
Battery status
Battery indicator
The batteries are fully
charged. Prepare new batteries.
There is no battery capacity.
Replace with new batteries.
There are 3 indicators for battery condition that are displayed on the LCD monitor.
3. To close the battery chamber cover, push it until it clicks.
2. Insert the batteries taking note of the
polarity (+ / -).
1. Open the battery chamber cover by pushing in the direction of the
arrow.
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity(+/-).
Using the batteries
[Inserting the AA type battery] [ Inserting the CR-V3 type battery ]
Always turn off the power before taking the AC adapter out of the mains supply.
As with all mains powered devices, safety is important. Ensure that neither the camera
nor adapter comes into contact with water or metallic materials.
Please ensure that you use an AC adapter (3.3V 2.0A) with the correct specification for
the camera. Failure to do so may affect your warranty.
DANGER

17
Instructions on how to use the memory card
Be sure to format the memory card (see p. 79) if you are using a newly purchased memory
for the first time, if it contains data that the camera cannot recognize, or if it contains images
captured with a different camera.
Turn off the camera power whenever the memory card is being inserted or removed.
Repeated use of the memory card will eventually reduce the memory card’s performance.
Should this be the case, you will need to purchase a new memory card.
Wear and tear on the memory card is not covered by the Samsung warranty.
The memory card is an electronic precision device.
Do not bend, drop or subject the memory card to any heavy impact.
Do not store the memory card in an environment with strong electronic or magnetic fields,
e.g. near loud speakers or TV receivers.
Please do not use or store in an environment where there are extremes in temperature.
Do not allow the memory card to become dirty or to come into contact with any liquid.
Should this happen, clean the memory card with a soft cloth.
Please keep the memory card in its case when not in use.
During and after periods of extended use, you may notice that the memory card is warm.
This is perfectly normal.
Do not use a memory card that is used in another digital camera or memory card reader.
Do not use a memory card formatted by another digital camera or memory card reader.
Maintenance of the memory card
If the memory card is subjected to any of the following, the recorded data may become
corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording, deleting
(formatting) or reading.
Samsung cannot be held responsible for lost data.
It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard
disks, CD etc.
If there is insufficient memory available : If you press the shutter button for the shot, a [CARD
FULL !] message will appear and the camera will not operate. To optimize the amount of
memory in the camera, replace the memory card or delete unnecessary images stored on
the memory.
Preserving the memory card data

18
Instructions on how to use the memory card
If you open the battery chamber cover when the camera power is turned on, the power
will turn off automatically.
Don’t remove the memory card when the Auto focus lamp(Green) is blinking as this may
cause damage to data in the memory card.
INFORMATION
[ SD(Secure Digital) memory card ]
Write
protect
switch
Label
Card
pins
The camera can use SD Memory Cards and MMC (Multi Media Card).
The SD memory card has a write protect switch
that prevents image files from being deleted or
formatted.
By sliding the switch to the bottom of the SD
memory card, the data will be protected.
By sliding the switch to the top of the SD memory
card, the data protection will be canceled.
Slide the switch to the top of the SD memory
card before taking a picture.
When using a 32MB internal memory, the specified shooting capacity will be as follows.
These figures are approximate as image capacities can be affected by variables such as
subject matter.
Mode
Quality/Size 2816 2272 2048 1600 1024 640 640 320 160
SUPER FINE 813162664162 - - -
FINE 16 26 32 52 95 205 - - -
NORMAL 25 39 48 65 127 244 - - -
30FPS ---- --44SEC 1MIN 37SEC 5 MIN
15FPS ------ 1MIN 13SEC 3MIN 8MIN 50SEC
STILL IMAGE mode MOVIE CLIP mode

19
Inserting the memory card
1. Turn the power off using the power button.
Open the battery chamber cover and press the memory
card as shown in the image and release.
2. Remove the memory card and close the battery chamber
cover.
3. To close, push the battery chamber cover until you hear a
click.
If the memory card does not slide in smoothly, do not
attempt to insert it by force. Check the direction of insertion,
and then insert it correctly. Do not insert the memory card
the wrong way round. Doing so may damage the memory
card slot.
2. Have the front of the memory card facing toward the back of
the camera (LCD monitor) and the card pins toward the front
of the camera (lens), and then push the memory card into
the card slot until you hear a click.
1. Turn off the camera’s power and pull the battery chamber
cover in the direction of the arrow to open.
Removing the memory card

20
LCD monitor indicator
[ Image & Full Status ]
No. Description Icons Page
1Battery p.16
3Continuous shot p.46
4Flash p.32
5Self-timer p.34
6 Macro p.30
7 Metering p.46
8 Card inserted indicator
9 Auto focus frame
10 Camera shake warning p.26
11 Date/ Time 2004.08.01 01:00 PM
12 Exposure compensation p.38
13 White Balance p.38
The LCD monitor displays information about the shooting functions and selections.
Recording mode
2
p.12~13
p.49
AEB