Samsung HT-BD1150 Use and care manual

F/W Update Method by USB flash drive
How to prepare F/W Update file via USB flash drive
1. Download the newest firmware file onto your computer from
www.samsung.com.
2. If the firmware file is compressed (*.zip), the file should be
uncompressed to RUF file (*.ruf).
3. Connect a USB flash drive to your computer.
4. If there are previous versions of RUF file on USB flash drive,
delete them.
5. Copy the new RUF file to USB flash drive.
Warning
The following events may interrupt the upgrade process and
may result in permanent damage to the unit.
1. Unplugging the power cord
2. Power Outage
How to upgrade the BD-Home Theater
1. Remove any disc, the display should read “No Disc”.
2. Insert USB flash drive into the USB Host jack.
3. Please wait while verifying.
4. After sometime, you will see "Yes/No" menu.
5. Press the 'Enter' button to choose 'Yes' if the version is a later version
than the current one.
6. Wait about 3~6 minutes. When finished, the power will turn off
automatically.
7. Remove the USB flash drive.
8. Upgrade is COMPLETE.
Verifying Firmware Version.
New Firmware is available.
Do you want to update now?
> Current Version: BEvX.XX_yymmdd_model_XAA
Or (HTB-modelXXC_10XX)
> New Version: BEvx.xx_yymmdd_model_XAA
Or (HTB-modelXXC_10XX)
New Firmware Update
Now, Processing…
Please do not turn off the power.
The power will be off automatically
After update is finished