Samsung HT-F5500W User manual

TO REDUCE THE RISKOF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTSARE INSDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lighting flash and
arrowhead within the triangle
are warning signs alerting you
to dangerous voltage inside
the product.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER (OR
BACK). NO USERSERVICEABLE PARTS INSIDE.
REFERSERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within
the triangle is a warning sign
alerting you to important
instructions accompanying the
product.
WARNING
Toreduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
FCC NOTES (for U.S.A)
This equipment has been tested and found to comply
with the Ihnits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on.
If interference is present, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiveK
Connect this equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
This class B digital product meets all requirements
of the Canadian Interference - Causing Equipment
Regulations.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
1 LASER product. Use of controls, adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Complies with 21CFR 1040.10 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007.
DANGER :
VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA
21 CFR)
CAUTION :
CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE TO THE
BEAM (lEO60825-1)
THIS PRODUCT UTILIZES A LASER, USE OF
CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE, DO NOT OPEN COVER AND DO
NOT REPAIRYOURSELE REFER SERVICING TO
QUALIFIED PERSONNEL,
2 English

Important Safety Instructions
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future
reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including AV receivers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety, if the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where itexits the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only wittq the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold wittq the apparatus.
Wtqena cart is used, use
caution wtqen moving the cart/
apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as when the power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
Holding Discs
- Fhqgerprints or scratches on _¢._.
a disc may reduce sound and picture :::"!t " ;'_:_.b
quality or cause skipping.
- Avoid touching the surface of a disc where data has
been recorded.
- Hold the disc by the edges so that fingerprints will
not get on the surface.
- Do not stick paper or tape on the disc.
Cleaning Discs
- If you get fingerprints or dirt on a disc,
clean it with a mild detergent diluted in
water and wipe with a soft cloth.
- When cleaning, wipe gently from the
inside to the outside of the disc.
- Disc Storage
,, Do not keep in direct sunlight.
,, Keep in a cool ventilated area.
,, Keep in a clean protection jacket and store
vertically.
Do not expose this apparatus to dripping or splashing.
Do not put objects filled with liquids, such as vases, on
the apparatus.
Toturn this apparatus off completely, you must pull the
power plug out of the wall socket. Consequently, the
power plug must be easily and readily accessible at all
times.
• Do not touch the power plug with a wet hand.
It can cause an electric shock.
• Do not plug multiple electric devices into the same wall
socket. Overloading a socket can cause itto overheat,
resulting in a fire.
• Bdore connecting other components to this product,
be sure to turn them off.
• If you move your product suddenly from a cold place
to a warm place, condensation may occur on the
operating parts and lens and cause abnormal disc
playback. Ifthis occurs, unplug the product, wait for
two hours, and then connect the plug to the power
outlet. Then, insert the disc, and try to play back again.
English 3

Iftheproductmakesanabnormalnoiseorproduces
aburningsmellorsmoke,turnoffthepowerswitch
immediatelyanddisconnectthepowerplugfrom
thewalloutlet.Then,contactthenearestcustomer
servicecenterfortechnicalassistance.Donotusethe
product.Usingtheproductasitismaycauseafireor
anelectricshock.
I][] DOLBY Ms_,nufs_,cturedunder license
from Dolby Laboratories.
Ddby, Pro Logic, and
DIGITAL PLUS 1 the doubb-D symbol are
trademarks of Dolby Laboratories.
dt nn #
MasterAudioJEssential I Ne0:Fusion
Manufactured under a license from U.S. Patent
No's: 5,956,674, 5,974,380, 5,978,762, 6,487,535,
6,226,616, 7,212,872, 7,003,467, 7,272,567,
7,668,723, 7,392,195, 7,930,184, 7,333,929 and
7,548,853. DTS, DTS-HD, the Symbol, and DTS
or DTS-HD and the Symbol together are registered
trademarks & DTS Neo:Fusion is a trademark of DTS,
Inc. @2012 DTS, Inc. AllRights Reserved.
The terms HDMI and HDMI
I=llii:::::llrrllll Nigh-DefinitionMultimedia
Interface, and the HDMI
Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries.
(_ Oracle and Java are registered trademarks
of Oracle and/or its affiliates. Other names
may be trademarks of their respective
Java" owners.
POWEREO
This item incorporates copy protection technology
that is protected by U.S. patents and other intelbctual
properb/rights of Rovi Corporation. Reverse engineering
and disassembly are prohibited.
Blu-ray DiscTM, Blu-ray TM, and the Iogos are trademarks
of Blu-ray Disc Association.
This product uses Cinavia technology to limit the
use of unauthorized copies of some commercially-
produced film and videos and their soundtracks. When
a prohibited use of an unauthorized copy is detected, a
message will be displayed and playback or copying will
be interrupted.
More information about Cinavia technology is provided
at the Cinavia Online Consumer information Center
at http://www.cinavia.com. To request additional
information about Cinavia by mail, send a postcard with
your mailing address to: Cinavia Consumer Information
Center, RO. Box 86851, San Diego, CA, 92138, USA."
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark of
Verance Corporation. Copyright 2004-2010 Verance
Corporation. All rights reserved by Verance. Reverse
engineering or disassembly is prohibited.
- Open Source Ucense Notice
Inthe case of using open source software, Open
Source Licenses are available on the product menu.
IMPORTANT HEALTH AND SAFETY INFORMATION FOR
3D PICTURES.
Read and understand the following safety information
before using the 3D function.
• Some viewers may experience discomfort while viewing
3D TV such as dizziness, nausea, and headaches.
Ifyou experience any such symptom, stop viewing 3D
T_, remove the 3D Active Glasses, and rest.
• Watching 3D images for an extended period of thne
may cause eye strain. Ifyou feel eye strain, stop
viewing 3D T_, remove your 3D Active Glasses, and
rest.
• A responsible adult should frequently check on children
who are using the 3D function.
Ifthere are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing 3D
TV and rest.
• Do not use the 3D Active Glasses for other purposes
(such as general eyeglasses, sunglasses, protective
goggles, etc.)
• Do not usethe 3D function or 3D Active Glasses while
walking or moving around. Using the 3D function or 3D
Active Glasses while moving around may cause you to
bump into objects, trip, and/or fall, and cause serious
injury.
4 English

Ifyou want to enjoy 3D content, connect a 3D device
(3D compliant AV receiver or TV) to the product's HDMI
OUT port using a high-speed HDMI cable. Put on 3D
glasses before playing the 3D content.
The product outputs 3D signals only through HDMI
cable connected to the HDMI OUT port.
As the video resolution in 3D play mode isfixed
according to the resolution of the original 3D video, you
can not change the resolution to your preference.
Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not operate
properly in 3D play mode.
You must use a high-speed HDMI cable for proper
output of the 3D signal.
Stay at bast three times the width of the screen from
the TV when watching 3D hnages. For exampb, if you
have a 46 inch screen, stay 138 inches (11.5 feet) from
the screen.
Place the 3D video screen at eye level for the best 3D
picture.
When the product is connected to some 3D devices,
the 3D effect may not function properly.
This product does not convert 2D content into 3D.
"Blu-ray 3D" and "Blu-ray 3D" logo are trademarks of
the Blu-ray Disc Association.
@2013 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user's manual
may be reproduced or copied without the prior written
permission of Samsung Electronics Co.,Ltd.
ilil
2 Warning
3 Precautions
3 Disc Storage & Management
3 Handling Cautions
4 License
4 Using the 3D Function
5 Copyright
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii:i_i_ili_!i_i_i_i_!!_!_i_i!_@_@_@_@_@_@_i
6 Disk and Format Compatibility
7 Logos of Discs the Product can Play
10 Accessories
11 Front Panel
11 Rear Panel
12 Remote Control
14 Connecting tt_eSpeakers
16 Attaching the Toroidal Ferrite Core to the Power
Cord of the Wireless Receiver Module (SWA-6000)
17 Connecting to TV/Extemal Devices
18 Connecting to a Network Router
19 The Initial Settings Procedure
19 The Holne Screen
19 Accessing the Settings Screen
20 Settings Menu Functions
24 Networks and the Internet
27 Upgrading Software
29 The All Content Screen
29 Playing Commercial Discs
29 Playing Fibs on a USB Device
30 Playing a Disc with User Recorded Content
30 Using the AIIShare Network Function
31 Controlling Video Playback
34 Controlling Music Playback
38 Playing Photo Contents
39 Listening to Radio
39 Using the Special Effects Remote Control Buttons
8
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!_
41 Logging h_to Your Samsung Account
41 Before Using Movies &TV Shows or Apps
42 Using Movies & TV Shows
42 Using Apps
46 Screen Mirroring
46 Using the Web Browser
49 Linking your Intemet Service Accounts to the Product
49 BD-LIVE T_
50 Additional h_formation
53 Troublest]ooting
56 Specifications
English 5

Disc types and content your Product can Play
I NOTES I
_, The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
_, If a DVD-RW/-R disc has not been recorded properly in DVD video format, itwill not be playable.
_, Your product will not play content that has been recorded on a DVD-R at a bitrate that exceeds 10 Mbps.
Your product will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 30
Mbps.
_, Playback may not work for some types of discs, or when you use specific operations, such as angle change
and aspect ratio adiustment, information about the discs is written in detail on the disc box. Please refer to this if
necessary.
_, When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Disc Types your Product cannot Play
HD DVD * DVD-RAM * DVD-RW(VR mode) * 3.9 GB DVD-R Disc for
DVD-ROM/PD/MV-Disc, * Super Audio CD * CVD/CD-ROM/CDV/ Authoring.
etc (except CD layer) CD-G/CD-I/LD
(CD-Gs play audio only,
not graphics.)
I NOTES I
_, This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow
specific or limited operation and provide only certain features during playback.
Please note that this is not a defect in the product.
_, Samsung cannot guarantee that this product wifl play even/disc bearing the Blu-ray Disc, DVD or CD logo because
disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software
and/or the manufacture of discs.
_, Please contact the SAMSUNG Customer Care Center at 1-800-726-7864 ifyou have questions or encounter
difficulty when playing Blu-ray Disc, DVD, or CD discs in this product. Also, refer to rest of this user manual for
additional information on playback restrictions.
_, Some commercial discs and DVD discs purchased outside your region may not play on this product.
6 English

Reg ooCoae.........................................................................................................................................................
Both products and discs are coded by region. These
regional codes must match for a disc to play. Ifthe codes
do not matctq, the disc wiUnot play.
The Region Number for ttqisproduct is displayed on the
rear panel of the product.
Norttl America, Central
rl_-],__ America, South America,
_L.ua_a,_g.jKorea, Japan, Taiwan, Hong
Kong and South EastAsia.
Blu-ray Disc I.... I
h,.,,-4
DVD-VIDEO
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
India, China, Russia, Central
and South Asia.
The U.S., U.S. territories and
Canada
Europe, ,Japan, the Middle
East, Egypt, South Africa,
Greenland
Taiwan, Korea, the PhiUppines,
Indonesia, Hong Kong
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
China
I NOTES I
_, Ifthe Region number of a Blu--ray Diso/DVDs
does not correspond to the Region number of this
product, the product cannot play the disc.
BDO
C.uw M
Maste[AudioiEssential Ne0:Fusion
English ?)

Supported Formats
Video File Support
*.avi MPEG4 SP/ASP
*.inky H,264 BP/
*,asf AVl MP/HP
*.wmv MKV
*.rap4 ASF Motion JPEG
*.3gp MP4
*.vro 3GP Microsoft
*.mpg MOV MPEG-4 v3
*.mpeg FLV Window Media
*.ts VRO Video v7, v8, v9
*.tp
*.trp VOB MPEG2
*.mov PS
*,fly TS MPEG1
*.vob SVAF
*.svi VP6
*.m2ts MVC
*.webm WebM VP8
1920x1080
(WMVv7,v8,
MSMPEG4 v3:
1280x720)
640x480
1920x1080
6-30 3O
4
24/25/30 60
6-30 20
Dolby Digital
LPCM
ADPCM
(IMA, MS)
AAC
HE-AAC
WMA
Dolby Digital
Plus
MPEG(MP3)
DTS
Vorbis
. Limitations
- Even when a file is encoded by a supported codec
listed above, the file might not be played if its content
is defective or corrupted.
- Normal playback is not guaranteed if the file's container
information is wrong or the file itself is corrupted.
- Files having higher bit or frame rates than standard
may stutter when played back.
- The seek (skip) function is not available ifthe file's
index table is damaged.
- When you playback a file remotely through a network
connection, video playback may stutter depending on
the network speed.
- Some USB/Digital camera devices may not be
compatible with the product.
. Video decoder
- Supports up to H.264 Level 4.1 (except for FMO/ASO/
RS)
- Does not support VC1 AP L4
- Except for WMV v7, v8, MSMPEG4 v3, MVC, VP6
Below 1280 X 720:60 frame max
Above 1280 X 720:30 frame max
- Does not support GMC 2 or higher
- Supports SVAF Top/Bottom, Side by Side Only
- Supports BD MVC Spec Only
Audio decoder
Supports WMA 10 Pro (Up to 5.1)
Does not support WMA Iossless audio.
Supported ADPCM IMA, MS.
Does not support ADPCM (A-Law, p-Low)
Does not support QCELP, AMR NB/WB
Supports vorbis (Up to 2ch),
Supports Dolby Digital Plus (Up to 7.lch)
. Comments
- MPEG4 : Supports up to GMC 1-Warping Point.
- H.264 : Supports up to BP/MP/HP Level 4.1.
- WMV: Supports V9, VC1 SP/MP/AP L3.
- MPEG1 : Does not support D-picture.
- MPEG2 : Supports up to Hight Profile High Level.
I NOTES I
Some MKV and MP4 format discs may not play,
depending on their video resolution and frame rate.
8 English

Music File Support
MPEG1
*.mp3 MP3 Audio
Layer 3
*.m4a
*.mpa
*.aac
MPEG4 AAC
*.flac FLAC FLAC Supports up to
2ch
Supports up to
*.egg OGG Vorbis 2ctl
*.wma WMA WMA
*.way
*,mid
*.midi
*.ape
Supports WMA 10
Pro (Up to 5.1)
Does not support
WMA Iossbss
audio
Supports up to M2
profile
Does not
support LBR mode
way way
midi rnidi type 0 and type 1
ape Does not support
ape X13, NVT
Picture File Support
*.jpg JPEG 15360x8640
*.jpeg
*.png PNG 4096x4096
*.bmp BMP 4096x4096
*.rope MPO 15360x8640
Notes on the USB connection
• Your product supports USB storage media, MP3
players, digital cameras, and USB card readers.
• The product does not support folder or file names
longer than 128 characters.
• Some USB/digital camera devices may not be
compatible with the product.
• Your product supports the FAT 16, FAT32, and NTFS
file systems.
• Connect USB devices directly to the product's USB
port. Connecting through a USB cable may cause
compatibility problems.
• Inserting more than one memory device into a
multi-card reader may cause the reader to operate
improperly.
• The product does not support the PTP protocol.
• Do not disconnect a USB device during a "loading"
process.
• The bigger the image resolution, the longer the image
takes to display.
• This product cannot play MP3 files with DRM (Digital
Rights Management) downloaded from commercial
sites.
• Your product only supports video that is under 30fps
(frame rate).
• Your product only supports USB Mass Storage Class
(MSC) devices such as thumb drives and USB HDD.
(HUB is not supported.)
• Certain USB HDD Devices, multi-card readers and
thumb drives may not be cornpatibb with this product.
• If some USB devices require excessive power, they
may be limited by the circuit safety device.
• If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a wall
socket. If the problem continues, contact the USB
HDD manufacturer.
• SAMSUNG is not responsible for any data file damage
or data loss.
AVCHD
(Advanced Video Codec High Definition)
• This product can play back AVCHD format discs.
These discs are normally recorded and used in
camcorders.
• The AVCHD format is a high definition digital video
camera format.
• The MPEG-4 AVC/H,264 format compresses images
with greater efficiency than the conventional image
compressing format.
• Some AVCHD discs use the "x.v.Oolor" format. This
product can play back AVCHD discs that use the
"x,v,Oolor" format,
English 9

'x.v.Color" is a trademark of Sony Corporation.
"AVCHD" and the AVCHD logo are trademarks of
Matsushita Electronic Industrial Co., Ltd. and Sony
Corporation.
I NOTES I
_, Some AVCHD format discs may not play, depending
on the recording conditions.
_, AVCHD format discs need to be finalized.
_, "x.v.Color" offers a wider color range than normal DVD
camcorder discs.
_, Some MKV and MP4 format discs may not play,
depending on their video resolution and frame rate.
Check for the supplied accessories below.
10 English

VOLUME CONTROL
OPEN/CLOSE
PLAY/PAUSE
STOP
FUNCTION JZ1
DISC TRAY DISPLAY _ -_/
s.Msu._ _ [ :Z_t _i_ j
[ ";:':i-'
L----J
_ t J
REMOTE CONTROL SENSOR USB POWER
I NOTES I
_, When the product is on, do not let children touch the product's surface. It will be hot.
_, To upgrade the product's software through the USB jack, you must use a USB flash drive.
_, When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the D button on the
product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the
button.
_, Ifyou use the Intemet service or play the USB device contents on the T_, you cannot select the BD/DVD mode with
the FUNCTION button. Stop the playing contents on the TV first to select the BD/DVD mode.
* FM ANTENNAf r
I I
POWER CORD SPEAKER OUTPUT
CONNECTORS
* Connecting the FM Antenna
HDMI OUT HDMI IN
EXTERNAL DIGITAL LAN TERMINAL
AUDIO IN (OPTICAL)
1. Connect the FM antenna supplied to the FM ANT ,Jack.
2. Slowly move the antenna wire around until you find a locationwhere reception isgood, then fasten it to a wall or
other rigid surface.
INOTESI
1, Maintain a minimum of 4 inches of clear space on all sides of the home theater to ensure adequate ventilation.
Do not obstruct the cooling fan or ventilation holes.
1, This product does not receive AM broadcasts.
English 11

Tour of the Remote Control
Turn the product on and
Tochange to Television mode
and control the TX4,pressbutton.
To change to Home Theater mode
and control the Home Theater,
press the BD button.
Press numeric buttons to operate
options.
Press to
Press to skip backwards or
forwards.
Press to stop/play
Cut off the sound ter¢
Press to move to the
Press to see the full screen
on aT_
Press to use the Tools menu.
Select on-screen menu items and
change
Return to the previous menu.
These buttons are used both for
menus on the product
several Blu-ray Disc functions.
Press to use Smart Hub.
Pressto select MANUAL/
PRESETin the Tuner function.
Press to search contents.
Selects the disc Audio language.
Press to select the home theater's
mode (HDMI, AUX, BD/DVD, etc.).
or
Press to select TV's video mode.
Set a Sleep time to shut off the
product.
Press to open and close the disc
tray.
Use to enter the Popup menu/Titb
menu.
Press to search backwards or
forwards.
Press to pause a disc.
Search for active FM stations and
to change channels.
Press to output the audio signal to
the home theater speakers or the TV
speaker. (See page 40)
Allows you to repeat a title,
chapter, track or disc.
Use to display the playback
information when playing
a Blu-ray/DVD disc.
Press to exit the menu.
Use to set a preset radio frequency.
Select MONOorSTEREOfor radio
broadcasts.
Press to apply the 3D sound effect.
Press to apply sound effects.
Use to adjust the level of the
subwoofer.
Selects the disc subtitle language.
12 English

Installing batteries in the Remote Control
I NOTES I
_, Make sure to match the "+" and '-" ends of the
batteries with the diagram inside the compartment.
_, Assuming typical TV usage, the batteries last for about
one year.
_, The remote contrd can be used up to approximately
23 feet (7 meters) from the product in a straight line.
Setting up the Remote Control
You can control certain functions of your TV with this
remote control.
To operate a TV with the Remote Control
1. Press the TV button to set the remote control to TV
mode.
2. Turn on your T_
3. Wtqib holding down the POWER button, enter the
code corresponding to your brand of T_ Daytron
If there is more than one code listed for your TV in Dynasty
the table, enter one at a time to deterlnine wtqictq Emerson
code works. Fisher
Example : For a Samsung TV
Whib holding down the POWER button, use Funai
the number buttons to enter OO. If that does not Futuretech
work, try 15, then 16, etc. GeneralElectric
(GE)
4. If ttqe TV turns off, the setting is complete. HallMark
You can use the TV POWER, VOLUME, Hitachi
CHANNEL, and Numeric buttons (0-9). Inkel
I NOTES I dCPenny
_, The remote may not be able to control some JVC
functions, depending on your brand of T_ Also, the KTV
remote control may not work on some brands of TVs. KEC
The remote control will work with Samsung TVs by KMC
default. LG(G01dstar)
Luxman
LXl(Sears)
TV Control Codes
8a_ :
Admiral MitsublshliMGA
56,57.53
(M.Wards) MTC
AMark 01.15 NEC
01,02,08,04,05,06,07, Nikel
Anam 08,09,10,11.12.13.14 Onking
AOC 01.18.40,48 Onwa
Bell&Ho_ell
(M.Wards) 57,58.81 Panasonlc
Br0csenic 59.60 Penney
Candle 18 Philco
Cetrenic 03
Citizen 08,18.25 Phllips
Cinema 97 Pioneer
Classic 03 Portland
Concerto 18 Proton
C0ntec 46 Quasar
Coronado 15 RadioShack
Crag 03.05.61.82,83,84 RO£/Proscan
Cr0slex 62
@oven 03 Realistic
CurtisMates 59,61.63 Sanpo
CXO 08
02,03,04,15.16,17,18, Sa//isurlg
19,20.21,22.23,24.25,
Daew00 26,27.28,29.30,32,34, Sanyo
35.36,48.59,90 Scott
40 Sears
08 Sharp
03,15,40,46,59,61,64,
82.83.84,85 Signature2000
(M.Wards)
19.65
08
08
06,40,56,59.66.67.68
40
15,18,50.59.69
45
56.59.67,86
70
59.61.87,88
08,15.40
15
01,15,16,17,37,38,39,
40,41,42.43.44
18
19,54,56,59,60,62,63,
65.71
15,17,18,48,54,59,60,
62,72.89
40.54
54
18.40
Magnav0x
Maran_z
Matsui
MGA
Sony
Soundesign
Spectricon
SSS
Sylvania
Symphonic
Tatung
Techwood
Teknika
TMK
Toshiba
Mdtech
Videch
Wards
Yamaha
York
Yupiteru
Zenith
Zonda
Dongyang
18.40.59.60.75
18
18.19.20.40.59.60
03
03
03
06.07.08.09.54.66.
67.73.74
18
03.15.17.18,48,54.
59.62.69.90
15.17.18.40,48.54.
62.72
63.66.80.91
15.18.59
40
06.66.67
17.48.56.60.61.75
18.59.67.76,77.78.
92.93.94
03.19
40
00.15.16.17,40.43.
46.47.48.49.
59.60.98
19.61.65
03.40.60.61
15.18.19
15.57.64
57.58
50.51.52.53.55
03.40
01
18
18.40.48.54.59.60.
62
61.95.96
06
18
03.15.18.25
18.40
19.57.63.71
18
59.60.69
15.17.18.40.48.54.
60.64
18
40
03
58.79
01
03.54
English 13

Thissectiondescribesvariousmethodsofconnectingtheproducttootherexternalcomponents.
Beforemovingorinstallingtheproduct,besuretoturnofftilepoweranddisconnectthepowercord.
Positionoftheproduct
Placeitonastandorcabinetshelf,or
undertheTVstand.
SelectingtheListeningPosition
Thelisteningpositionshouldbelocated
about2.5to3thnestheTV'sscreen
sizeawayfromtheT_Forexample,if
youhavea46inchscreen,locatethe
listeningposition115to138inches(9.6
to11.5feet)fromthescreen.
Placethesespeakersinfrontofyourlisteningposition,facinginwards(about450)towardyou.
Placethefrontspeakerssothattheirtweeterswillbeatthesameheightasyourear.Alignthe
frontfaceofthefrontspeakerswiththefrontfaceofthecenterspeakerorplacethemslightly
infrontofthecenterspeakers.
ItisbesttoinstalltheCenterSpeakeratthesameheightasthefrontspeakers.Youcanalso
installitdirectlyoverorundertheT_
Placethesespeakerstothesideofyourlisteningposition.Ifthereisn'tenoughroom,place
thesespeakerssotheyfaceeachother.Positionthemabout2to3feet(60to90cm)above
yourear,facingslightlydownward.
*Unlikethefrontandcenterspeakers,thesurroundspeakersareusedmainlyforsound
effects.Soundwillnotcomefromthemallthetime.
Thepositionofthesubwooferisnotsocritical.Placeitanywhereyoulike.
*Surroundspeakersmustbeconnectedtothewirelessreceivermodule.
14 English

Speaker Components
Connecting The Speakers
1. Match each speaker cabb bundle to ttqecorrect speaker by matching the color coded
plug on eaetqbundle to the colored sticker on the bottom of each speaker.
2. Toattach speaker wire to each speaker:
a. Press down the red tab on ttqeback of the speaker, insert ttqered wire, and then
release the tab.
b. Press down the black tab on ttqeback of the speaker, insert ttqeblack wire, and then
release the tab.
3. Connect the speaker wire plugs from eaetqspeaker to the back of the product by
matching ttqecolors of the speaker plugs to ttqecolors of the speaker jacks.
4. Connect the left and rigtqtsurround speakers to the wirebss receiver modub.
Again, match the color of the plugs to the jacks on the wirebss receiver modub.
5. Plug the power cord of the wirebss receiver modub into a wall outbt.
6. Turn on the product. Ttqeproduct and wireless receiver modub will now communicate with each other and you will
hear sound from the Surround speakers.
English 15

ICAUTION I
_,Ifyou want toinstallthespeakerson thewall,fastenscrews ornails(notprovided)firmlytothewallwhereveryou
wanttohang a speaker,and then,usingthe holeintherearofeachspeaker,carefullyhang eachspeakeron a screw
ornail.
_,Do notletchildrenplaywithornearthespeakers.They couldget hurtifa speakerfalls.
_,When connectingthespeakerwirestothespeakers,make surethatthe polarity(+/-}iscorrect.
_,Keep thesubwooferspeakeroutofreachofchildrentopreventchildrenfrominsertingtheirhands oralien
substancesintotheduct(hole)ofthesubwooferspeaker.
_,Do nothang thesubwooferon thewallusingtheduct(hole}.
_,The wirelessreceivingantennaisbuiltintothewirelessreceivermodule.Keep itaway fromwaterand moisture.
_,Foroptimallisteningperformance,make surethattheareaaroundthewirelessreceivermodule locationisclearof
any obstructions.
_,Ifyou hearno sound fromthewirelesssurroundspeakers,switchthe mode toDolbyPro LogicII.
_,In2-OH mode, you willhearnosound fromthewirelesssurroundspeakers.
1NOTES1
_,Ifyou placea speakernearyourTV set,thescreencolormay bedistortedbecauseofthemagneticfield.
_,Placethewirelessreceivermodule attherearofthelisteningposition.Ifthewirelessreceivermodule istoocloseto
theproduct,sound fromthespeakersmay be disruptedbecauseofinterference.
_,Ifyou use a devicesuch asa microwaveoven,wirelessLAN Card,Bluetoothequipmentorany otherdevicethatuses
the2.4/5.8GHzfrequenciesneartheproduct,sound fromthespeakersmay be disruptedbecauseofinterference.
_,The maximum transmissiondistancefromtheproducttothewirebssreceivermodule isabout33 feet(10m},but
may varydependingon youroperatingenvironment.Ifa steel-concretewallormetallicwallisbetween theproduct
and thewirelessreceivermodule,thesystemmay notoperateatall,becausetheradiowave cannotpenetratemetal.
_,Iftheproductdoesn'tmake a wirelessconnection,you need torunan IDSetbetweenthe productand wireless
receiver modub. With the product turned off, press "0"->"1 "->"3"->"5" on the remote control. Turn on the wireless
receiver module. Then, press and hold the "ID SET" button on the back of the wireless receiver module for 5
seconds, and then turn the product on.
If you attach a Toroidal ferrite core to the power cord of the wireless receiver
module, it will help to prevent RF interference from radio signals.
1,
2.
3.
Pull the fixing tab of the Toroidal fernte core to open it.
Make a loop twice in the wireless receiver module power cord.
Attach the Toroidal fernte core to the wireless receiver module power
cord as the figure shows and press it until it clicks.
Insert the fernte core as close to the Wireless Receiver Module as
possible.
16 English

Connecting to a TV
Connect an HDMI cable (not supplied) from tile HDMI OUT jack on the back of the product to the HDMI INjack oil your
T_ If you have set the product's remote contrd to operate your TV,press tile "IV SOURCE button on tile remote control
and select HDMI as the external source of the T_
Connecting to External Devices
To select tile correct mode for all external device, press the FUNCTION button. Eactl time you press the button, the
mode changes in this order : BD/DVD --*D. IN - AUX --*HDMI - FM - BT
AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO Injack on the product to the AUDIO Out jack on the
external analog component. =>Select the AUX mode.
• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
OPTICAL : Connecting an External Digital Audio Component
Use to connect tile digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-
Top-Boxes). Using a digital optical cable (not supplied), connect the Optical Digital Audio hi jack on the product to the
Digital Optical Out iack of the external digital device.
=>Select the D. IN mode.
HDMI IN : Connecting to an External Component with an HDMI Cable
Connect an HDMI cable (not supplied) from the HDMI INjack on the back of the product to the HDMI OUT jack on your
digital device. =_Select the HDMI mode.
I NOTES I
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your T_
This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported
English 17

Youcanconnectyourproducttoyournetworkrouter
usingoneofthemethodsillustratedbelow.
Wired Network
Wireless Network
I NOTES I
_, Your router or your Internet Service Provider's policies
may prevent the product from accessing Samsung's
software update server. Ifthis occurs, contact your
Internet Service Provider (ISP)for more information.
_, DSL users, please use a router to make a network
connection.
_, To use the AlIShare function, you must connect your
PC to your network as shown in the illustrations on the
above.
The connection can be wired or wireless.
I NOTES I
_, Ifyour wireless IP router supports DHCP, this product
can use a DHCP or static IP address to connect to the
wireless network.
_, Set your wireless IP router to Infrastructure mode. Ad-
hoc mode is not supported.
_, The product supports only the following wireless
security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
_, Select a channel on the wireless IP router that is not
currently being used. If the channel set for the wireless
IP router is currently being used by another device
nearby, it will result in interference and communication
failure.
Incompliance with the newest Wi-Fi certification
specifications, Samsung home theaters do not
support WEP, TKIP, or TKIP-AES (WPS2 Mixed)
security encryption in networks running in the 802.11 n
inode.
_, Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (AP
performance, distance, obstacles, interference by
other radio devices, etc).
18 English

TheInitialSettingsProcedureletsyousettheOSDand
menulanguages,configuretheconnectiontoyourhome
network,choosetheaspectratiooutput(screensizeand
fomlat)thatiscorrectforyourT_,andapplyanupgrade
toyourproduct'ssoftware,ifoneisavailable.
ForcompleteInitialSettingsinstructions,seetheQuick
StartGuide.
INOTESI
_,IfyouwanttodisplaytheInitialSettingsscreenagain
andmakechanges,selectSettings>System>
SetupintheHomescreenorselecttheResetoption.
(Seepage22)
@
Movies & TV Shows : Download movies and
TV Shows from the Internet.
IN©TES 1
_, Depending on your country, this menu
function may not be supported.
Recommended Apps : A list of useful and
popular apps we recommend you download.
Web Browser: You can access ttqehqtemet
using the Web Browser application.
Apps:Download/Accessw riousforpayor
free-of-charge applications.
Photos, Videos & Music : Play photos, videos
or music content from Disc, USB, PC or mobile
devices.
Settings : Set various functions to suit your
personal preferences.
RED (A) : Press the RED (A) button on your
remote to create and/or log in to your personal
Samsung account.
BLUE (D) : Set up the wireless mirroring
function between the home theater and a smart
phone or tablet.
,, Selecting an Option on the Home Screen
1. To select an option on the Home screen, move the
cursor using the A T _t_. buttons until it highlights
ttqeoption of your choice, and then press the r_
button.
I NOTES I
If you leave the product in the stop mode for more
than 5 minutes without using it, a screen saver will
appear on your T_ If the product is left in the screen
saver mode for more than 20 minutes, the power will
automatically turn off.
1. Select Settings on the Home screen, and then
press _. The Settings screen appears.
To access the menus, sub-menus, and options
on the Settings screen, please refer to the remote
control illustration on the next page.
English _9

Buttons on the Remote Control Used
for the Settings Menu
O
m
O HOME Button : Press to move _o _neHome
screen.
RETURN Button : Return to the prewous menu
(Enter)/DIRECTION Button:
• Press A_' 4 _- to move the cursor or selec-c
an item.
• Press the _ button _o acwa_e _necurreml,
selected item or confirm a setting.
EXiT Button Dressto exit the current enu
Detailed Function Information
Each Settings function, menu item, ana inolvlqu80D_lon
is explained in detail on-screen. To view an e_olana_lon
use the A T _ _ buttons to select the functior men
item, or option. The explanation will usually ap_ear on _ne
right of the screen.
A short description of each Settings function starts or
this page. Additional information on some of the functions
is also in the Appendix of this manual.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_iil¸i!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii@ii_i_!_ii!_i_
i i i
3D Settings
TV Aspect Lets you adiust the output of the
Ratio product to the screen size of your
T_ See page 50.
BD Wise
Resolution
Movie Frame
(24Fs}
DVD 24Fs
Conversion
Smart Hub
Screen Size
Set uF ttqe3D related functions
v" 3D Blu-ray Playback Mode HDMI Color
Select whether to Dlava Blu-rav Format
}isc with 3D contents in 3[ Mode
If you move to the Home or Smart
Hub Home menu wine in 3D
mode, riseproduct will swl_cnto 2E
automatically. HDMI Deep
v" Screen Size: Enterthe size of the Color
TV attached to the product. Ttqe
proaucTwlll au_omaNcs aqus_Tne
3D out_ UTTOTnescreen size of the
T_
BD Wise is Samsung's latest inter-
connectivity feature.
When you connect a Samsung
product and a Samsung TV with BD
Wise to each other via HDMI, and
BD Wise is on in both the product
and TX4,the product outputs video at
the video resolution and frame rate
of the Blu-ray/DVD Disc.
Lets you set the output resolution of
the HDMI video signal to
BD Wise, Auto, 1080p, 1080i,
720p, 480p. The number indicates
the number of lines of video per
frame. The i and p indicate interlaced
and progressive scan, respectively.
The more lines, the higher quality.
Setting the Movie Frame (24Fs)
feature to Auto lets the product
adiust its HDMI output to 24 frames
per second automatically for
improved picture quality if attached
to a 24Fs compatible T_
•You can enioy the Movie Frame
(24Fs)feature only on a TV
supporting this frame rate.
• Movie Frame is only available
when the product is in the HDMI
1080p output resolution modes.
Converts DVD playback to 24
frames per second and outputs it via
HDMk This option is only available
when Movie Frame (24Fs) is set to
on.
Lets you select the optimal size for
ttqeSmart Hub Screen.
Lets you set the color space format
for the HDMI output to match the
capabilities of the connected device
(TV, monitor, etc).
Lets you set the product to output
video from the HDMI OUT jack with
Deep Color. Deep Color provides
more accurate color reproduction
with greater color depth.
2_ English