Samsung Series 4+ 430 User manual

Contact SAMSUNG WORLDWIDE
if you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
iii_i_!_ii_!!i!!i!!i!!i!!i!iiiiiiiiiiiiiiiiiiii!i!i!i!ii_
CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga, Ontario
L5R 4B2 Canada
U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us Samsung Electronics America, Inc.
85 Challenger Road
Ridgefield Park, NJ 07660-2112
© 2011 Samsung Electronics Co., Ltd. All rights reserved. I II
BN68-03325D-01
imag ne the possibilities
Thankyoufor purchasingths Samsungproduct.
To receive "-nore complete service, please register
youroroouctat
www.samsung.com/register
Mode Serial No.
if you nave any quesuons, please call us at 1-800-SAMSUNG ,1-800-726-7864 for assistance.

/
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. |
Product design and specifications may be changed without notice. J
_ See the warranty card for more information oil warranty terms.
Wide screenformat PDP Displays (16:9, the aspect ratio of the screen width to height) areprimarily designed to view wide screen format full-motionvideo.
The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fi[[the screen if your model offersthis feature and
the images are constantly moving. Displayingstationary graphics and images on screen, such as the dark side bars on non-expanded standard format
televisionvideo and programming, should be limited to nomore than 5% of the total televisionviewing per week.
Additionally, viewingother stationary images andtext such as stock market reports, video game displays, station [ogos,web sitesor computer graphics
and patterns, should be limited as described above for a[[televisions. Displayingstationary imagesthat exceed the above guidelinescan cause uneven
aging ofPDP Displays that leave subtle, but permanentburneddn ghost images in the PDP picture. Toavoid this,vary the programming and images, and
primarily display fuji screen moving images, not stationary patterns or dark bars.
On PDP models that offer picturesizing features, use these controls toview different formats as a full screen picture.
Be careful in the selection and duration of televisionformats you use for viewing. Uneven PDPaging as a result of format selection and use, as well as
burned in images, are not covered byyour Samsung limitedwarranty.
• SAMSUNG ELECTRONICSNORTH AMERICAN LIMITEDWARRANTYSTATEMENT
Subject to the requirements, conditions, exclusionsand limitationsof the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)
products, and the requirements, conditions, exclusionsand [imitationscontained herein,SAMSUNG will additionally provideWarranty Repair Service
in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the
warranty period originallyspecified, andto the Original Purchaseronly.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service(}enter. Along with this Statement, the Original Limited
Warranty Statement and a dated BillofSale as Proof of Purchase must be presented to the ServiceCenter. Transportation to and from the Service
Center is the responsibilityof the purchaser. Conditions covered are limitedonly to manufacturing defects in materialor workmanship, and onlythose
eneeuntered in normal use of the product.
Excluded, but not limitedto, are any originally specified provisionsfor, in-home or on-site services, minimum or maximum repairtimes, exchanges or
replacements, accessories, options, upgrades, or consumables.
For the location ofa SAMSUNG Authorized ServiceCenter, pleasecalltoil-free:
- Inthe United States : 1-800-SAMSUNG (1-800-726-7864)
- InCanada : 1-800-SAMSUNG
• Screen image retention
Do not display a stillimage (such as on a video game)on the plasma display pane[for more thanseveral minutes as itcan cause screenimage
retention, This image retention isalso known as 'screen burn', To avoid such image retention, referto page 15 ofthis manual to reduce the degree of
brightness and contrast of the screen when displaying a stillimage.
• Heat on the top of the P[asma'rV
The top sideof the product may be hot after [0% periodsof useas heat dissipatesfrom the panelthrough the vent hole in the upper part of the
product.
This is normal and does not indicate any defect or operation failure ofthe product.
However, children should be prevented from touching the upper part ofthe product.
• The product is making a 'cracking' noise.
A 'cracking' noise may occur when the product contracts or expands dueto achange in the surrounding environment such as temperature or
humidity. This is normal and not a defect ofthe unit.
• Cell Defects
The PDP usesa panel consisting of 2,360,000(HDdevel) to 6,221,000(FHDdevel) pixelswhich require sophisticated technology to produce. However,
there may bea few bright or dark pixels on the screen. These pixels will haveno impact on the performance of the product.
• Avoid operating the rv at temperatures below 41°F (5°0)
• A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the PlasmaTV in 4:3 format for a long period oftime may [eevetraces of borders displayed on the [eft,right and center
of the screen caused by the difference of lightemission on the screen. Playing a DVD or a game console may cause similar effects
to the screen.
Damages caused by the above effect are not covered by the Warranty.
• After-images on the Screen.
Displaying still images from Video games and PC forlonger than a certain period oftime may produce partialafterdmages.
Toprevent this effect, reduce the 'brightness' and 'contrast' when displayingstill images for a long time.
• Warranty
Warranty does not cover any damage caused by image retention.
Burndn is not covered W the warranty.
• Caution The glass screen of your PDPTV can breakif you accidently drop the T_ Handle the TV with care.
Wtlen moving the TV,always have two or more people pick it up and carry it as a safety precaution. Do not lay tile TV fiaton its face
or back.
2
(Your)Samsung PlasmaTV is a high qualitytelevisionthat has been carefullypackaged to protect the integrityof its glasspaneland component parts
during shipment. It is, nonetheless,a fragile piece of electronics that requires carefulhandling. Refrain from putting undue stress on any part of the
packaging when shipping or unpacking the T_ Use care when installingthe T_ Avoid placing the TV ina location where it maybe struck, exposed to
sharp impacts, or fail. Panelbreakage caused by a fall or impact strike is not covered under the manufacturer's warranty.
English

Contents
o
• List of Features ......................................................... 4
• Accessories .............................................................. 4
• Installthe Stand ........................................................ 5
• Viewing the Control Panel ......................................... 6
• Remote Control Buttons ........................................... 7
• Connecting to an Antenna or Cable Connection ....... 8 •
• Plug & Play (InitialSetup) ........................................... 8
• Connecting to an AV Device ...................................... 9
• Connecting to an Audio Device ............................... 10
• Connecting to a PC ................................................ 11
• Changing the Input Source .......................................
• How to Navigate Menus .......................................... 12
• Channel Menu ........................................................ 13
SeeingChannels 13
Using FavoriteChanneb 13
Memorizing Channels 13
Editing Channels 14
Other Features 14
• Picture Menu .......................................................... 15
Changingthe PresetPicture Mode 15
Adjusting PictureSettings 15
Changingthe PictureOptions 15
• Sound Menu ........................................................... 17
Changingthe PresetSound Mode 17
AdjustingSound Settings 17
Sound Settings 17
Setup Menu ............................................................ 18
Settingthe Time 18
Usingthe SleepTimer 19
Settingthe On /Off Timer 19
Locking Programs 19
Economical Solutions 21
Other Features 21
Suppo_ Menu ......................................................... 22
• Media Play.............................................................. 23
Connecting a USB Device 23
• Anynet+ .................................................................. 26
Setting UpAnynet+ 27
Switching between Anynet+ Devices 28
Recording 28
Listeningthrough a Receiver 28
Troubleshootingfor Anynet+ 29
• Installing theWall Mount ......................................... 30
• Securing the Installation Space ............................... 31
• Securing the TV to the Wall..................................... 32
• Troubleshooting ...................................................... 33
Storage and Maintenance 35
• License ................................................................... 36
• Specifications ......................................................... 36
• Dimensions ............................................................. 37
• Index ...................................................................... 38
Thisfunctioncanbeusedbypressingtile
TOOLSbuttonontheremotecontrok
Check the Symbol!
Note
indicatesadditionalinformation.
®
Step by Step Guide
Checkhereforinstructionsonhowtoopen
therebvantsubmenuwithintheOSD(on
screendisplay).
English 3

Getting Started
• Excellent Digital interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed
without a cable box /STB (Set-Top-Box) satellite receiver.
• SRS TruSurround HD provides a virtual surround system (p. 17).
• Media Play: Allows you to play music files, pictures saved on a USB device (p. 28),
• Self Diagnosis: You can check to make sure picture and sound operate normally (p. 22).
Please make sure the following items are included with your PDP TV. If any items are missing, contact your dealer.
The items' colors and shapes may vary depending on the model.
Check that there is no accessory hidden behind packing materials when you open the box.
iiiiiFerrite Core for Power Cord: The ferrite cores are used to shield the cables from interference.
When connecting the ferrite core to a cable, open the ferrite core and clip it around the cable
near the plug as shown in the figure, z B
* A One ferrite core should be no more than 8 inches from the end of the cord that is
inserted into the TV.
* B If your TV came with a second ferrite core (the 43 inch model), the second core should be
no more than 3/4 inches from the end of the cord that is inserted into the AC outlet.
Ferrite Core :The ferrite cores are used to shield the cables from interference. When
connecting a cable, open the ferrite core and clip it around the cable near the plug as shown
in the figure. (51inch model only)
Power Cord
Antenna Cable/
Component Cable
(sold separately)
Input Cables (Sold Separately)
Check the cable before plug-in
Warning
English
Do not plug cable upside down.
Be sure to check before plug-in. 1

See separate guide for installing the stand,
x4 (M4X L12)
x4 (M4X L8)
Fellow the steps below to connect the TV to the stand.
(M4 X L12)
TopView
t,Front ATTENTION
®®o
Rear DONOTUSE DONOTUSE DONOTUSE
CHEMICALS GREASE OIL
Connect the Guide Stand to the Stand using four screws (M4 X L12) asshown.
(Correct assembly) (Incorret assembly)
2. With your TV upright, connect the TV to the Stand. 3. Fasten four screws (M4 X L8) at position.
NOTE
* Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
* Make sure that at least two people lift and move the PDP TV.
Z_ Do not insert your fingers into the stand base slot of the TV when installing the stand base.
English 5

Getting Started
The product color and shape may vary depending on the model.
Power Indicator --
Remotecontrol sensor
Speakers
Power Indicator
Remote control sensor
d) IPower}
SOURCE
tIENU/CONTENT
--VOL+
VCHA
Blinks and turns off when the power ison and lights up in standby mode.
Aim the remote control towards this spot on the TV.
Turns the TV on or off.
Toggles between all the available input sources, Inthe on-screen menu, use this
button as you would use the ENTERIZ_ button on the remote control.
Displays an on-screen menu, the OSD (on screen display) of your TV's features.
Adjusts the volume. In the OSD, use the --VOL+ buttons as you would use the
_1and I_ buttons on the remote control.
Changes the channels. Inthe OSD, use the V CH A buttons as you would use the
T and A buttons on the remote control.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe
and to decrease power consumption, do not leave your TV in standby mode for long periods oftime (when you are away on a
holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to
unplug the power cord.
English

Turns the TV on and off.
Pressto directlyaccess channels.
Pressto select additional digital channels
(digital) being broadcasted by the same
station. Forexample, to select channel
"54-3", press "54", then press "-" and
"3".
Adjusts the volume.
Bringsup tile OSD.
Displays Media Play (USB) (p. 23).
Quickly select frequently usedfunctions.
Returnsto tile previous menu.
Displaysand selects the availablevideo
sources (p. 12).
Cuts off the sound temporarily.
Changes channels.
II
I the channel list the
Displays on screen
(p.is).
II
i Automatically shuts off the TVat a preset
time (p. 19).
Displays information on the TV screen.
Selects tlqeon-screen menu kems and
changes the values seenon the menu.
Exitsthe menu.
Buttons used in tlqeChannel list,
Media Play (USB) menu, etc.
\/
MTS: Press to choose stereo, mono,
or SeparateAud# Program (SAP
broadcast) (p. 18).
RSIZE: Lets you choose the picture
size (p.16).
CC: Controls the caption decoder (p. 21).
Installing batteries (Battery size: AAA)
NOTE
*Use the remote control within 23 feet from the TV.
*Bright light may affect the performance of the remote
control. Avoid using when near fluorescent lights or neon
signs,
*The color and shape may vary depending on the model.
English 7

Getting Started
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and an antenna or cable connection.
The PDP device may interfere with an amateur radio or AM radio.
When you move or swivel the TV with Antenna cable tightly connected, there is high risk antenna jack on TVwill be broken
off.
VHF/UHFAntenna
I
_ Powerinput
When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn on
the _ Press the POWER (b button. Plug & Play is available onlywhen the input source is set to TV.
Plug & Play is available only when the Source is set to TV.
To return to the previous step, in the Plug & Play sequence, press the red button on your remote.
Selecting the OSD
Language
Selecting Store Demo
or Home Use
Selecting an antenlqa
Press the 4 or _ button, and then press the A or T button to
select a _anguage.Press ENTERE_ when done. POWER
Press the _ or I_ button, then press the ENTERE_ button.
• Select the Home Use mode. Store Demo mode is for retail
environments.
• To return the unit's settings from Store Demo to Home Use
stanaaral: Press the volume button on the T_. When you
see tne volume OSD, press and hold MENU for 5 sec.
Press the A or T button, then press the ENTERI_ button. Select Air, Cable or Auto.
Selectinc ana
memorizing channels
Setung tne
Clock Mode
View the
HD Connection Guide.
The channe search will start automatically. This can take up to 30 minutes.
For more informatior., refer to Channel --_Auto Program in the e-Manual.
Press the ENTERIZ_ button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
• Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
• Manual: Allows you to manually set the current date and time (p. 18).
The connection method for the best HD screen quality is displayed.
Enjoy your TV. Press the ENTER I_ button.
if You Want to Reset This Feature...
(_ MENU rrrl _ Setup -_ Plug & Play _ ENTERI_
NOTE
• To change the TV's setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV.
When you see the volume in the OSD, press and hold MENU for 5 sec.
English

Connections
Using an HDMI or HDMI/DVI cable: HD connection (up to 720p/1080i)
We recommend using the HDMI connection for the best quality HD picture.
Available devices: DVD player, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver.
HDMI Cabb (No_Supplied)
Red White
HDM_ _NI(DV_), 2, DV_AUDIO _N
HDNI to OVI CaNe (Not Suppled)
Audio Cabe/Not Supplied)
" When using an HDMI/DVI cable connection, you must use the HDM_ _Nl(DVm)jack for video. A DVD player,
Blu-ray player, HD cable box, or HD STB satellite receiver may require a DVI-HDMI (DVIto HDMI) cable or
DVI-HDMI (DVIto HDMI) adapter. You must use the PC/DW AUDIO _Njack for audio. The DW AUDIO _Njack
is required for audio.
" The picture may not display normally (if at all) or the audio may not work if an external device that uses an
older version of HDMI mode to the TV. Ifsuch a problem occurs, ask the manufacturer of the external device
about the HDMI version and, if out of date, request an upgrade.
Besure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may
OCCUr.
Using a Component (up to 720p/1080i) or an Audio/Video (480i only) Cable
Available devices: DVD player, Blu-ray player, cable box, STB satellite receiver, VCR
oooo ,
® ® .................°-/
.......,j)'
When connecting to AV _N,the color of the AV _N[Y/VDEO] jack (green) will not match the video cable (yellow).
For better picture quality, the Component connection is recommended over the A/V connection.
English 9

Connections
Using an Optical (Digital) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD home theater
j..................,,..................................................
J o
Optical Cable/Not Supplied/
DIGITAL AUDIO OUT (OPTICAL)
* When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
* 5,1 OH (channel) audio is available when you connect the TV to an external device supporting 5.1 OH.
* When the receiver (amplifier or DVD home theater) is set to on, you can hear sound output from the TV's
optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 OH sound to the amplifier or DVD
home theater. When the source is a digital component such as a DVD player /Blu-ray player /cable box /STB
(Set-Top-Box) satellite receiver and you connection it to the TV via HDMI, you will only 2 OH audio from the
amplifier or DVDhome theater. Ifyou want to hear 5.1 OH audio, connect the digital audio out jack from your
DVD/Blu-ray player /cable box /STB satellite receiver directly to an amplifier or home theater. /
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link
EXU NK: Connector for service only.
0 English

Using an HDMm/DVm Cable
AudioCa_e/NotSupplied)
HDMI to DV] CaMe/Not Supplied)
Your PC may not support an HDMI connection.
Display Modes (HDMI/DVI Input)
Optimal resolution
• PN43D430, PN43D440, PN43D450:1024 X 768 @60Hz /PN51 D430, PN51 D440, PN51D450:1360 X 768 @ 60Hz
iiiiiiiiiiiiiiiiiiiiiiiiiii_!_!i!i!l:_!_:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l:l_!_!_i]_i!
IBM
MAC
VESA DMT
640 x 350
720 x 400
640 x 480
832 x 624
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
31.469
31.469
35.000
49.726
31.469
37.500
37.861
37.879
46.875
48.077
48.363
56.476
60.023
47.712
70.086
70.087
66.667
74.551
59.940
75.000
72.809
60.317
75.000
72.188
60.004
70.069
75.029
60.015
25.175
28.322
30.240
57.284
25.175
31.500
31.500
40.000
49.500
50.000
65.000
75.000
78.750
85.500
+/-
-/+
+/+
+/+
+/+
_/_
+/+
+/+
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
v
NOTE
* For HDMI/DVI cable connection, you must use the HDM_ _NI(DV_)jack.
* The interlace mode is not supported.
* The set may operate abnormally if a non-standard video format is selected.
* Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
English 11

Edit Name
Source List
Use to select TV or an external input sources
such as a DVD player /Blu-ray player /cable
box /STB satellite receiver.
(_ MENU iTR_ Input _ Source List --_
ENTER I_
SOURCE
II -IV /AV /Component1 /Component2 /
HDMI1/DVI /HDMI2
You can only choose external devices that are
connected to the TV. In Source, connected inputs
will be highlighted.
(_ MENUITTI --_Input _ Edit Name _ ENTERI_
Inthe Source, press the TOOLS button, and then you can
set an external input sources name you want.
Ill VCR /DVD /Cable STB /Satellite STB /PVR STB /
AV Receiver /Game /Camcorder /PC /DVl PC /
DVl /TV /IPTV /Blu-ray /HD DVD /DMA: Name the
device connected to the input jacks to make your input
source selection easier.
Ifyou have connected a PC to the NDM_ _NI(DW) port
with an HDMI cable, select PC under Edit Name to
enter a device name.
if you have connected a PC to the NDMI IN I(DW} port
with an HDMI to DVI cable, select DVI PC under Edit
Name to enter a device name.
Ifyou connected an AV device to the NDMI _NI(DVm}
port with an HDMI to DVIcable, select DVl Devices
mode under Edit Name to enter a device name.
Basic Features
Before using the TV,follow the steps below to learn how to
navigate the menu and select and adjust different functions.
@
O
O MENU button: Displays the main on-screen menu.
0 ENTERE]_ /Direction button: Move the cursor and
select an item. Confirm the setting.
RETURN button: Returns to the previous menu.
O EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access steps may differ depending on the selected
menu.
MENU []
!! ii
A?T
ENTER
A/_ Select the desired submenu with
the A or T button.
4 ! _ Adjust the value of an item with the
: 4 or _ button. The adjustment inthe OSD may differ depending on
the selected menu.
ENTER E_ Press ENTERI_ to confirm the
selection.
EXiT-,Ij Press EXIT.
The main menu options appear on
the screen:
Picture, Sound, Channel, Setup,
Input, Application, Support.
Select an icon or option with the A
or T button.
Press ENTERI_ to access the
sub-menus.
2 English

Seeing Channels
Channel List
The Channel List contains the channels your
TV displays (added channels) when you press
the Channel button on your remote, On the
Channel List, you can view Added Channels,
channel information, and Favorites, and
manage channels.
(_ MENUFITI --_Channel --_Channel List
ENTERI_
Select a channel in the All Channels,
Added Channels, Favorite or Programmed
screen by pressing the A /T and
ENTERE_ buttons, Then you can watch the
selected channel.
Using Favorite Channels
(_ MENUITTI --_Channel _ Channel List _ ENTERI_
Add to Favorite /Delete from Favorite
Tag channels you watch frequently as Favorites.
1. Select a channel and press the TOOLS button.
2. Add or delete a the channel using the Add to Favorite
or Delete from Favorite menu respectively.
Memorizing Channels
(_ MENUITTI --_ Channel _ ENTERI_
Ill (_AII Channels: Shows allcurrently available channels.
Ill _Added Channels: Shows all added channels.
Ill _ Favorite: Shows allfavorite channels.
Ill _ Programmed: Shows all currently reserved
programs.
Using the color buttons with the Channel List
* _ Green (Zoom): Enlarges or shrinks a channel
number,
* Yellow (Select): Selects multiple channel lists,
Select desired channels and press the Yellow button
to set all the selected channels at the same time. The
_/ mark appears to the left of the selected channels.
* _-_ (Tools): Displays the Channel List option menu.
(The options menus may differ depending on the
situation.)
Channel Status Display Icons
_/ A channel selected,
V A channel set as a Favorite.
(_) A reserved Program.
Antenna (Air /Cable) _ ..........................................................................................
Beforeyour television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e,an Air or a Cable system).
Auto Program ..........................................................................................................................................................................................
Ill Air: Air antenna signal.
Ill Cable: Cable antenna signal.
Ill Auto: Air and Cable antenna,
English 13

Basic Features
NOTE
When selecting the Cable TV system: STD, HRC
and IRC identify various types of cable TV systems.
Contact your local cable company to identify the
type of cable system that exists in your particular
area. At this point, the signal source has been
selected.
After all the available channels are stored, it starts
to remove scrambled channels. The Auto Program
menu then reappears.
Editing Channels
MENUITTI _ Channel --_ Channel List --_ ENTER{_
Channel Name Edit
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Channel Name Edit
menu.
III Channel Name Edit (analog channels only): Assign your
own channel name.
Other Features
MENUITTI _ Channel --_ ENTER[_
Clear Scrambled Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20-30 minutes.
How to Stop Searching Scrambled Channels
1. Press the ENTERIZ_ button to select Stop.
2. Press the _ button to select Yes.
3. Press the ENTER_ button.
This function is only available in Cable mode.
Channel List
Channel List Option Menu
Set each channel using the Channel List menu options (Add
/Delete, Timer Viewing, Select All/Deselect All). Option
menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select afunction and change its settings.
m
m
Add /Delete: Delete or add a channel to display the
channels you want.
NOTE
All deleted channels will be shown on the
All Channels menu.
A gray-colored channel indicates the channel
has been deleted.
The Add menu only appears for deleted
channels.
Delete a channel from the Added Channels or
Favorite menu in the same manner.
Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
1. Press the _1/I_ /A/• buttons to select the
desired channel in Channel List.
2. Press the TOOLS button, then select
Timer Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote to enter
the date and time.
Ifyou selected Once, Everyday, Every Week,
Mon~Fri, Mon~Tue, Wed~Thu or Sat~Sun in
Repeat, you can enter the date you want.
4. Press the ENTER_ button when done.
NOTE
• Only memorized channels can be reserved.
• Reserved programs will be displayed in the
Programmed menu.
• When a digital channel is selected, press the I_
button to view the digital program.
Select All: Select allthe channels in the channel list.
Deselect All: Deselect allthe selected channels.
You can only select Deselect All when one or
more channels are selected.
Programmed
(in Channel List)
You can view, modify or delete a show you have reserved
to watch. Programmed timer viewing is displayed here.
Highlight a program and press the TOOLS button to display
options.
Ill Change mnfo:Change a show you have reserved to
watch. Begin with step 3 of "Timer Viewing," above.
4 English

m
m
m
CancelSchedules:Cancelashowyouhavereserved
towatch.
Thisdeletesthehighlightedorselected
program(s),
Information:Displayashowyouhavereserved
towatch.(Youcanalsochangethereservation
Information.)
Alternatively,youcanviewInformationby
highlightingaprogramandpressingthe
ENTERC_button.
SelectAll/Deselect All: Select or deselect allreserved
programs.
Fine Tune
(analog channels only)
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. Ifthe signal is weak or distorted, fine tune
the channel manually. Scroll to the left or right until the image
is clear,
Settings are applied to the channel you're currently
watching,
Finetuned channels that have been saved are marked
with an asterisk .....on the right-hand side of the
channel number in the channel banner.
To reset the fine-tuning, select Reset,
Changing the Preset Picture Mode
(_ MENIUiTR -_ Picture -_ Mode -_ ENTERE__}_
Mode
Select your preferred picture type.
Ill Dynamic: Suitable for a bright room.
Ill Standard: Suitable for a normal environment.
Ill Movie: Suitable for watching movies in a dark room.
Adjusting Picture Settings
(_ MENUrlTI --_ Picture _ ENTER[_%_
Cell Light /Contrast /Brightness /
Sharpness/Color!Tint(G!R) ..........................................................
Your television has several options for adjusting picture
quality, Select an option using the up and down arrow keys,
and then press ENTER, Use the arrow keys to adjust the
option value or select an option setting, When done, press
ENTER.
NOTE
* When you make changes to Cell Light, Contrast,
Brightness, Sharpness, Color or Tint (G/R), the
OSD will be adjusted accordingly.
* Settings can be adjusted and stored for each
external device connected to the TV.
* You can adjust and store Settings for each external
device connected to the TV.
Changing the Picture Options
Advanced Settings
(_ MENU iTR--_ Picture _ Advanced Settings --_
ENTER I_
All Advance Settings are available in the Standard and
Movie modes. In PC mode, you can only make changes to
Gamma and White Balance.
To use, select an option using the up and down arrow keys,
and the press ENTER, Use the arrow keys to change value
or setting, and then press ENTER.
Ill Black Tone (Off /Dark /Darker /Darkest): Select the
black level to adjust the screen depth.
Ill Dynamic Contrast (Off /Low /Medium /High):
Adjusts the screen contrast.
Ill Gamma: Adjust the primary color intensity.
English 15

Basic Features
Ill Color Space (Auto /Native): Adjust the range of colors
available to create the image.
Ill White Balance: Adjust the color temperature for a more
natural picture.
R-Offset /G-Offset /B-Offset: Adjust each color's (red,
green, blue) darkness,
R-Gain /G-Gain /B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
Ill Flesh Tone: Emphasize pink "Flesh Tone."
Ill Edge Enhancement (Off /On): Emphasize object
boundaries.
P!cture Opt!c ns.............................................................................................................................................................................
(_ MENU iTR_ Picture --_ Picture Options --_
ENTER I_
Ill Color Tone (Cool /Normal /Warm1 /Warm2)
Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic or Standard.
Settings can be adjusted and stored for each external
device connected to an input on the TV.
Ill Size: Ifyou have a cable box or satellite
receiver, it may have its own set of
screen sizes as well, However, we highly
recommend you use 16:9 mode most of
the time,
16:9 :Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Cuts off the top and sides.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture so it
fits the entire screen.
Available with HD 1080i /720p signals in 16:9
mode.
4:3 : Sets the picture to basic (4:3) mode.
Do not set your TV to 4:3 format for a long time.
The borders displayed on the left and right, or
top and bottom of the screen may cause image
retention (screen burn) which are not covered by
the warranty,
Screen Fit: When your TV inputs HDMI (720p /1080i /
1080p) or Component (1080i /1080p) signals, displays
the full image without any cut-off.
NOTE
To use the Position function after selecting Zoom1,
Zoom2 or Wide Fit, follow these steps:
1. Press the I_ button to select Position.
2. Press the ENTERIZ_ button.
3. Press the A or T button to move the picture up
or down.
4. Press the ENTERIZ_ button.
5. Press the _ button to select Reset.
6. Press the ENTERIZ_ button to reset the picture
to its default position.
* To use the Position function after selecting
Screen Fit in HDMI (1080i/1080p) or Component
(1080i/1080p) follow these steps:
1. Press the _ or I_ button to select Position.
2. Press the ENTERI_ button,
3. Press the A, _r, _ or I_ button to move the
picture.
4. Press the ENTERE_ button.
5. Press the _ or I_ button to select Reset,
6. Press the ENTERI_ button,
* HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
* You can adjust and store settings for each external
device you have connected to an input on the TV,
Digital Noise Filter (Off /Low /Medium /High /
Auto): If the broadcast signal received by your TV is
weak, you can activate the
Digital Noise Filter feature to reduce any static and
ghosting that may appear on the screen.
When the signal is weak, try other options until the
best picture is displayed.
6 English

Ill HDMIBlackLevel(Normal/Low): Lets you select the
black level on the screen to adjust the screen depth.
Available only in HDMI mode.
Ill Film Mode (Off /Auto): Sets the TV so that it senses
automatically and then process film signals from all
sources and adjusts the picture for optimum quality.
Available in TV, AV, COMPONENT (480i/1080i)
and HDMI (480i/1080i).
Ill Screen Burn Protection: To reduce the possibility of
screen burn, this unit is equipped with screen burn
prevention technology. The Time setting allows you to
program the time between movement of the picture in
minutes.
Pixel Shift (Off /On): Using this function, you can
minutely move pixels on the PDP in horizontal or vertical
direction to minimize after images on the screen.
Optimum condition for pixel shift
Horizontal 0~4 4
Vertical 0~4 4
Time(minute) 1~4rain 4 rain
The Pixel Shift value may differ depending on the
TV size (inches) and mode.
This function is not available in the Screen Fit
mode.
Scrolling: This function removes after-images on the
screen by moving all the pixels on the PDP according
to a pattern. Use this function when there are remaining
after-images or symbols on the screen, especially when
you displayed a still image on the screen for a long time.
The after-image removal function has to be
executed for a long time (approximately 1 hour)
to effectively remove after-images on the screen.
Ifthe after-image is not removed after performing
the function, repeat the function again.
Press any key on the remote control to cancel this
feature.
Side Gray (Dark /Light): When you watch TV with the
screen ratio set to 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme
left and right sides.
Picture Reset (Reset Picture Mode /
Cancel) ..................................................................................................
Resets your current picture mode to its default settings.
Changing the Preset Sound Mode
(_ MENUITTI --_Sound _ Mode _ ENTER[_
Select an option using the up and down arrow keys, and the
press ENTER.
Mode
Use the up and down arrow keys to select an option, and
then press ENTER.
Standard: Selects the normal sound mode.
m
m
m
m
m
Music: Emphasizes music over voices,
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voices over other sounds.
Custom: Increase the intensity of high-frequency sound
to allow a better listening experience for the hearing
impaired.
Adjusting Sound Settings
(_ MENU ITTI--_Sound _ Equalizer _ ENTER[_
The Equalizer displays a series of sliders. Use the up and
down arrow keys to select a slider, Use the left and right
arrow keys to change the slider's value. To Reset the
Equalizer,select Reset and press ENTER, then press
ENTER again. To exit, select CLOSE, and then press
ENTER.
Equalizer
Adjusts the sound output.
Ill Balance L/R: Adjusts the balance between the right and
left speaker,
Ill 100Rz /300Hz /lkHz /3kHz /10kHz (Bandwidth
Adjustment): Adjusts the volume level of specific
bandwidth frequencies.
Ill Reset: Resets the equalizer to its default settings.
Sound Settings
(_ MENUrlTI --_ Sound _ ENTERI_
SRS TruSurround HD (Off /On)..........................................................................
This function provides avirtual 5.1 channel surround sound
experience through a pair of speakers using HRTF (Head
Related Transfer Function) technology.
English 17

Basic Features
Preferred Language ..........................................................................................................................Sound Reset (Reset All/
(digitalchannelsonly) Reset Sound Mode /Cancel)
Use the up and down arrow keys to select a Ill Reset All: Restore all sound settings to the factory
language, and then press ENTER. defaults.
DigitaI-TV broadcasts can simultaneously Ill Reset Sound Mode: Returns allsound values in the
transmit many audio tracks (for example, currently selected mode to the default settings.
simultaneous translations of the program into
foreign languages).
You can only select a language from
among the being broadcasted. Setting the Time
Multi-Track Sound (MTS) {_ MENU iTFI--_Setup -_ Time -_ ENTERE_
(analog channels only)
Ill Mono: Choose for channels that are
broadcasting in mono or if you are having
difficulty receiving a stereo signal.
Ill Stereo: Choose for channels that are
broadcasting in stereo.
Ill SAP: Choose to listen to the Separate
Audio Program, which is usually a
foreign-language translation.
Depending on the program being broadcast, you can
listen to Mono, Stereo or SAR
Auto Volume (Off /On) ..................................................................................................
Normal equalizes the volume level on each channel, so that
when you change channels, the volume level is the same.
Night equalizes and decrease the volume level on each
channel, so each channel is quieter. Night is useful at night,
when you may want to keep the volume low.
Speaker Select (External Speaker /
W Speaker} .....................................................................................................................................
Ifyou are listening to the sound track of a broadcast or
movie through an external receiver, you may hear a sound
echo caused by the difference in decoding speed between
the TV's speakers and the speakers attached to your audio
receiver. If this occurs, set the TV to External Speaker.
When you set Speaker Select to External Speaker,
the TV's speakers are turned off. You will hear sound
through the external speakers only. When you set
Speaker Select to TV Speaker both the TV's speakers
and the external speakers are on. You will hear sound
through both.
When Speaker Select is set to External Speaker.
" TV Speaker: Off, External Speaker: On
When Speaker Select is set to TV Speaker.
" TV Speaker: On, External Speaker: On
Ifthere is no video signal, both the TV's speakers and
the external speakers will be mute.
Time
Ill Clock: Setting the clock to use the various timer features
of the TV.
{_ The current time wiii appear every time you press
the _NFObutton.
if you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto /Manual)
- Auto: Have TV set the current time automatically
using the time from a digital channel.
You must have the cable or antenna connected
to the TV to set the time automatically.
- Manual: Set the current time manually.
Depending on the broadcast station and signal,
the auto time set up may not be correct. Inthis
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute and
am/pm manually. Select Clock Set. Select Date or Time,
and then press ENTER. Use the number buttons to
enter numbers or press the up and down arrow buttons.
Use the left and right arrow buttons to move from one
entry field to the next. Press ENTER when done. To exit
Clock Set, selet Close, and press ENTER.
Available only when Clock Mode is set to
Manual.
You can set the Month, Day, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
Time Zone: Select your time zone.
This function is only available when the
Clock Mode is set to Auto.
DST (Daylight Saving Time) (Off /On /Auto):
Switches the DST (Daylight Saving Time) function on or
off.
This function is only available when the
Clock Mode is set to Auto.
8 English

Using the Sleep Timer
(_ MENUiTR _ Setup _ Time _ Sleep Timer
ENTER E_
mSleep Timer: Automatically shuts off the
TV after a preset period of time. (30, 60,
90, 120, 150 and 180 minutes).
To cancel the Sleep Timer, select
Off.
Setting the On /Off Timer
(_ MENU rlTI_ Setup --_Time _ Timer 1 --_
ENTER E_
Set On Timer so that your TV turns on automatically at a
time and on a day of your choosing.
Ill Timer 1 /Timer 2 /Timer 3: Three different on /off
timer settings can be made. You must set the clock first.
On Time /Off Time: Setthe hour, minute, and activate
/inactivate. (Toactivate the timer with the setting you've
chosen, set to Activate,)
Volume: Set the desired volume level. Use the left and
right arrow buttons to change the volume level.
Contents: Select a folder in the USB device containing
music or photo files to be played when the TV is turned
on automatically.
NOTE
If there is no music file on the USB device or the
folder containing a music file is not selected, the
Timer function does not operate correctly.
* When there is only one photo file in the USB,
the Slide Show will not play.
* If afolder name is too long, the folder cannot be
selected.
* Each USB you use is assigned its own folder.
When using more than one of the same type of
USB, make sure the folders assigned to each
USB have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mort~Sat,
Sat~Sun or Manual to set at you convenience. Ifyou
select Manual, you can set up the day you want to
activate the timer.
The _/ mark indicates the day is selected.
Auto Power Off (available only when the TV is turned
on by the Timer): The TV will be automatically turned off
after 3 hours of being left idle to prevent overheating.
Locking Programs
V-Ch!p .................................................................................................................................
The V-Chip feature automatically locks out programs that
are deemed inappropriate for children. The user must enter a
PIN(personal identification number) before any of the V-Chip
restrictions are set up or changed.
NOTE
V-Chip is not available in HDML Component or PC
mode.
The default PIN number of a new TV set is "0-0-0-0"
Allow M: Press to unlock all TV ratings.
Block All: Press to lock all TV ratings.
Ill V-Chip Lock (Off /On): You can block rated TV
Programs.
IV Parental Guidelines: You can block TV programs
depending on their rating. This function allows you to
control what your children are watching.
- rv-Y: Young children /rv-Y7: Children 7 and over/
rV-G: General audience /rV-PG: Parental guidance
/TV-14: Viewers 14 and over /TV-MA: Mature
audience
- ALL: Lock allTV ratings. /FV: Fantasy violence /
V:Violence /S: Sexual situation /L: Adult Language /
D: Sexually Suggestive Dialog
The V-Chip will automatically block certain
categories dealing with more sensitive material.
For example, if you block the TV-Y category,
then TV-Y7 will automatically be blocked.
Similarly, if you block the TV-G category, then all
the categories in the young adult group will be
blocked (TV-G, TV-PG, TV-14 and TV-MA). The
sub-ratings (D, L, S, V) work similarly. So, if you
block the L sub-rating in TV-PG, then the L sub-
ratings in TV-14 and TV-MA will automatically be
blocked.
English 19

Basic Features
MPAA Rating: You can block movies depending on
their MPAA rating. The Motion Picture Association of
America(MPAA) has implemented a rating system that
provides parents or guardians with advanced information
on which films are appropriate for children.
- G: General audience (no restrictions). /PG: Parental
guidance suggested./PG-13: Parents strongly
cautioned, /R: Restricted, Children under 17 should
be accompanied by an adult, /N0-17: No children
under age 17./X: Adults only, /NR: Not rated.
The V-Chip will automatically block any category
that deals with more sensitive material, For
example, if you block the PG-13 category, then R,
N0-17 and X will automatically be blocked.
Canadian English: You can block TV programs
depending on their Anglophone Canadian ratings.
- C: Programming intended for children under age 8, /
08+: Programming generally considered acceptable
for children 8 years and over to watch on their own,
/G: General programming, suitable for all audiences.
/PG: Parental Guidance, /14+: Programming
contains themes or content which may not be
suitable for viewers under the age of 14. /18+: Adult
programming.
The V-Chip will automatically block any category
that deals with more sensitive material, For
example, if you block the G category, then
PG, 14+ and 18+ will automatically be blocked.
Canadian French: You can block TV programs
depending on their Anglophone Canadian ratings.
- G: General /8 ans+: Programming generally
considered acceptable for children 8 years and over
to watch on their own, /13 ans+: Programming may
not be suitable for children under the age of 13. /
16 arts+: Programming is not suitable for children
under the age of 16. /18 arts+: Programming
restricted to adults.
The V-Chip will automatically block any category
that deals with more sensitive material, For
example, if you block the 8 arts+ category, then
13arts+, 16 ans+ and 18 arts+ will automatically
be blocked also.
Downloadable U.S. Rating: Parental restriction
information can be used while watching DTV channels.
NOTE
* If information is not downloaded from the
broadcasting station, the
Downloadable U.S. Rating menu is
deactivated,
* Parental restriction information is automatically
downloaded while watching DTV channels. It
may take several seconds.
* The Downloadable U.S. Rating menu
is available for use after information is
downloaded from the broadcasting station,
However, depending on the information from
the broadcasting station, it may not be available
for use,
* Parental restriction levels differ depending on
the broadcasting station. The default menu
name and Downloadable U.S. Rating change
depending on the downloaded information.
* Even if you set the on-screen display to another
language, the Downloadable U.S. Rating
menu will appear in English only.
" The rating will automatically block certain
categories that deal with more sensitive
material.
" The rating titles (For example: Humor Level..etc)
and TV ratings (Forexample: DH, MH, H,,etc)
may differ depending on the broadcasting
station.
Change PIN: The Change PINscreen will appear.
Choose any 4 digits for your PIN and enter them. As
soon as the 4 digits are entered, the
Confirm New PIN screen appears. Re-enter the same
4 digits. When the Confirm screen disappears, your PIN
has been memorized.
How to watch a restricted channel
Ifthe TV is tuned to a restricted channel, the V-Chip will
block it. The screen will go blank and the following message
will appear:
This channel is blocked by V-Chip. Please enter the PINto
unblock.
Ifyou forget the PIN, press the remote-control buttons
in the following sequence, which resets the pin to
'9-0-0-0": POWER (off) --_ MUTE _ 8 _ 2 --_4 --_
POWER(on)
0 English