Samsung BSP6000 User manual

World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-XXXXXA
EU A. 02/2009. Rev. 1.0

English ............................................................. 1

English
1
Contents
Getting started
Your speakers overview ...................................................4
Button functions.............................................................6
Assembling and preparing your speakers ...........................8
Using your speakers
Turning the speakers on or off........................................ 10
Pairing and connecting the speakers................................ 11
Using call functions....................................................... 13
Using music control functions ......................................... 15
Setting a DNSe sound effect .......................................... 17
Connecting the speakers to a music player....................... 18
Connecting the speakers to another device via the line-in
cable .......................................................................... 19
Using Power saving mode .............................................. 20

2
Appendix
Frequently asked questions............................................ 21
Warranty and parts replacement..................................... 23
Correct disposal of this product ...................................... 24
Specications............................................................... 25

English
3
Take the time to read through this user manual before using the
BSP6000 Bluetooth SPEAKER.
Bluetooth®is a registered trademark of the Bluetooth SIG, Inc.
worldwide—Bluetooth QD ID: Bxxxxxx
More information about Bluetooth is available at www.bluetooth.com.
Safety precautions
Never disassemble or modify your speakers for any reason. Doing
this may cause the speakers to malfunction or become combustible.
Bring the speakers to an authorised service centre for repairs.
Avoid storage at high temperatures (above 50° C/122° F), such as in
a hot place or in direct sunlight, as this can damage performance and
reduce speakers life.
Do not expose the speakers or any of their parts to rain or other
liquids.
•
•
•

4
Getting started
This section explains the proper use of your Bluetooth speakers.
Your speakers overview
1
2
3
4 9
8
5
1 6
7
10

English
5
1
Mood lamps
6
Power jack
2
Indicator light
7
Line-in jack
3
Power button
8
Volume control buttons
4
Talk button
9
DNSe button
5
Speakers
10
Music control buttons
Make sure that you have the following items with your speakers :
power cord, line-in cable, and user manual.
The items supplied with your speakers may vary depending on your region.

6
Button functions
Button Functions
Power Touch and hold to turn the speakers on
or off.
Talk
Touch to make or answer a call.
Touch to end a call.
Touch and hold to enter Pairing mode.
•
•
•
REW Touch to skip backward.
Touch and hold to scan backward in a le.
•
•
Play/Pause/
Stop
Touch to launch the music player.
Touch to begin or pause playback.
Touch and hold to stop playback.
•
•
•
FF Touch to skip forward.
Touch and hold to scan forward in a le.
•
•

English
7
Button Functions
DNSe Touch to select a DNSe sound effect.
Volume control Touch to adjust the volume.
The indicator light on the speakers will turn red when the volume
reaches its lowest or highest level.
Do not use the speakers in humid places or handle them with wet hands.
•
•

8
Assembling and preparing your speakers
1Insert the speaker stems in the holes in the base and adjust them as
desired.

English
9
2Plug the small end of the power cord into the power jack.
3Plug the large end of the power cord into a power outlet.

10
Using your speakers
This section explains how to turn the speakers on, pair and connect with
the phone, and use various functions.
Available functions and features may differ depending on your type of
phone.
Some devices, especially those that are not tested or approved by the
Bluetooth SIG, may be incompatible with your speakers.
•
•
Turning the speakers on or off
To turn the speakers on, touch and hold [ ] until you hear an alert
and the indicator light ashes.
To turn the speakers off, touch and hold [ ] until you hear an alert.
•
•

English
11
Pairing and connecting the speakers
Pairing will create a unique and encrypted wireless link between
two Bluetooth enabled devices, such as a Bluetooth phone and your
Bluetooth speakers. To use the speakers with other Bluetooth devices,
the devices must be paired. When trying to pair the two devices, keep
the speakers and the phone reasonably close together. After pairing, you
can connect the two devices.
Pairing and connecting the speakers with a phone
1To enter Pairing mode, touch and hold [ ] until the speakers sound
an alert.
When you turn on the speakers, they automatically enter Pairing
mode.
2Activate the Bluetooth feature on your phone and search for the
speakers (see your phone’s user manual).

12
3Select the speakers (BSP6000) from the list of devices found by your
phone.
4Enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the
speakers to your phone.
Your speakers support the Simple Pairing feature which allows the
speakers to be paired with a phone without requesting a PIN. This feature
is available when the phone is compliant with Bluetooth version 2.1 or
higher.
Disconnecting the speakers
To disconnect the speakers from your phone,
Touch and hold [ ] to turn the speakers off.
Use the Bluetooth menu of your phone.
Reconnecting the speakers
When the speakers are paired with a phone, they will attempt to
automatically reconnect each time you turn the power on.
If the speakers do not automatically attempt to reconnect,
Touch and hold [ ].
Use the Bluetooth menu of your phone.
•
•
•
•

English
13
Using call functions
Making a call
Redialling the last number
Touch and hold [ ] to redial the last number.
For some phones, touching [ ] opens the call log list. Touch [ ]
again to dial the selected number.
Dialling a number by voice
Touch [ ] and say a name to dial a number by voice.
Answering a call
Touch [ ] to answer a call when you hear incoming call tones.
Ending a call
Touch [ ] to end a call.
Rejecting a call
Touch and hold [ ] to reject a call when a call comes in.

14
Using options during a call
You can use the following functions to control your call:
Adjusting the volume
Touch [ / ] to adjust the volume.
Transferring a call from the phone to the speakers
Touch [ ] to transfer a call from the phone to the speakers.
Placing a call on hold
Touch and hold [ ] to place the current call on hold.
Answering a second call
Touch [ ] to end the rst call and answer a second call when you hear
call waiting tones.
Touch and hold [ ] to place the rst call on hold and answer a second
call when you hear waiting tones.
To switch between the current call and the held call, touch and hold [ ].

English
15
Using music control functions
Listening to music
1Touch [ ].
2If your phone asks whether to listen to music via the speakers, select
Yes or OK.
The music player launches and sound output switches to the
speakers.
3Control playback with the following buttons:
: Touch to pause or resume playback.
: Touch to skip backward. Touch and hold to scan backward.
: Touch to skip forward. Touch and hold to scan forward.
/ : Touch to adjust the volume.
•
•
•
•

16
Answering a call while listening to music
When a call comes in while you are listening to music, your speakers will
alert you so that you can answer the call.
1When the speakers sound incoming call tones and the blue indicator
light ashes twice, touch [ ].
The music stops and you are connected with the caller.
2 When you have nished the conversation, touch [ ].
Your phone automatically resumes playback after the call.

English
17
Setting a DNSe sound effect
DNSe (Digital Natural Sound Engine) is a technology that enhances
listening experience. 3D sound mode simulates the surround sound,
while Bass boost mode reinforces the bass output.
1Touch [ ] until the desired sound effect is selected.
2Touch and hold [ ] to check the current sound effect setting.
Sound effect LED indicator
Standard Blinks once
3D sound mode Blinks twice
Bass boost mode Blinks three times
3D & Bass boost mode Blinks four times
The DNSe feature is not available when you use the line-in cable to connect
to an external device.