Samsung HL-S5088W - 50" Rear Projection TV User manual

DLP TV
Owner's Instructions
HL-SS088W
HL-SS688W
H~-~6188W
, 78W

Trademark Notice
In the United States, TV GUIDE and other related marks are registered marks of Gemstar-TV Guide
International, Inc. and/or one of its affiliates. In Canada, TV GUIDE is aregistered mark of
Transcontinental Inc., and is used under license by Gemstar-TV Guide International, Inc.
Aux
Etats Unis TV GUIDE et d'autres marques relatives sont des marques deposees de
Gemstar-TV
Guide International, Inc. et/ou d'une de ses societes affiliees. Au Canada TV GUIDE
est une marque deposee de Transcontinental Inc., utilisee sous licence de Gemstar-TV Guide
International, Inc.
License Notice
The TV Guide On Screen system is manufactured under license from Gemstar-TV Guide
International, Inc. and/or one of its affiliates.
le sysh3me TV Guide On Screen est fabriques sous licence de Gemstar-TV Guide International, Inc.
et/ou d'une de ses societes affiliees.
Patent Notice
The TV Guide On Screen system is protected by one or more of the following United States patents
4,908,713; 6,498,895; 6,850,693; 6,396,546; 5,940,073; 6,239,794 to Gemstar-TV Guide
International, Inc. and/or its subsidiaries.
Le systeme "TV Guide On Screen" est protege par au moins un des brevets americains (USA) de
Gemstar-TV
Guide International, Inc. et/ou de ses societes affililiees: 4,908,713; 6,498,895;
6,850,693; 6,396,546; 5,940,073; 6,239,794.
Disclaimer Notice
Gemstar-TV Guide International Inc. and/or its related affiliates are not in any way liable for the
accuracy
or availability of the program schedule information or other data in the TV Guide On
Screen system and cannot guarantee service availability in your area. In no event shall Gemstar-TV
Guide International, Inc. and/or its related affiliates be liable for any damages in connection with
the accuracy
or availability of the program schedule information or other data in the TV Guide On
Screen system.
Gemstar-TV
Guide International, Inc. et/ou ses filiales ne sont responsables en aucune maniere de
I'exactitude ou de la disponibilite des informations relatives aux programmes de television ou des
autre informations fournies dans
Ie systeme TV Guide On Screen et ne peut pas garantir la
disponibilite du service dans votre region.
En aucun cas, Gemstar-TV Guide International, Inc.,
et/ou ses filiales ne peuvent etre tenues responsables pour tout dommage en relation avec
I'exactitude ou la disponibilite des informations relatives aux programmes
de television ou
des autre informations fournies dans
Ie systeme TV Guide On Screen.

A Guide to Digital TV
• What is Digital Television?
Digital television (DTV) is anew way of transmitting high quality video and audio to your TV set.
Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digital surround
audio, and new services such as multicasting (transmitting more than one program on the same
TV channel) and datacasting. Several of these services can be combined into asingle digital
broadcast.
Digital Television Services
•Digital Picture Quality
DTV programs are transmitted in two different formats. The first is Standard Definition Television
(SDTV) and the second is High Definition Television (HDTV).
•SDTV program formats include 480-line interlaced (480i) and 480-line progressive (480p) video.
480i programs are essentially adigital version of our current analog TV programs, while the 480p
format offers improved image detail over 480i. Some 480p programs are broadcast in widescreen
and are comparable to progressive-scan DVD movies in image quality.
•HDTV program formats include 1080-line interlaced (1 080i) and 720-line progressive (720p).
Both HDTV formats are always broadcast in widescreen, and offer much higher picture quality than
SDTV.
•Dolby Surround Sound
With DTV, you can listen to avariety of Dolby digital audio formats from Dolby Surround 2.0 to
Dolby Digital 5.1 surround, using your home audio system. Many HDTV programs are now
broadcast with DD 5. 1soundtracks.
U.S.A Only
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third
parties.
In particular, this product is licensed under the following US patents:
5,991,715,5,740,317,4,972,484,5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992,
6,289,308,5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490,5,878,080, and under US Published
Patent Application No. 200 1-44713-A1.
This license is limited to private nOrKommercial use by end-user consumers for licensed contents. No rights are
granted for commercial
use. The license does not cover any product unit other than this product unit and the license
does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used
or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or
decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license
for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
Other countries
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain
third parties.
This license is limited to private non-commercial use by end-user consumers for licensed contents.
No rights are granted for commercial use. The license does not cover any product unit other than this product unit
and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC
11172-3 or
ISO/IEC 13818-3
used or sold in combination with this product unit. The license only covers the use of this
product unit to encode
and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
No rights are granted under this license for product features or functions that do not conform to the ISO/IEC
11172-3 or ISO/lEe 13818-3.
English-3 _

CableCARD and Digital Cable Ready TVs
CableCARD and Digital Cable Ready TVs are the products of anew digital cable standard.
This new standard is called OpenCable and it is aconcerted effort to standardize the digital cable
service network interface
in North America. For more information, please refer to www.cablelabs.com.
Digital Cable Ready
TVs are equipped with aproper digital cable tuner to receive digital cable signals
from your local cable service provider. They are also designed to work with digital cable card modules
(PCMCIA card modules called CableCARDs).
These PCMCIA card modules or CableCARDs will be
provided
by your local cable service provider after aproper subscription process.
The provided CableCARD from your local cable service provider needs to be inserted into the
CableCARD slot of aDigital Cable Ready TV. Please refer to page 22 for how to insert the CableCARD.
Adigital set-top box which
used to be provided by the cable service provider is no longer needed with
Digital Cable Ready
TVs and CableCARDs.
When CableCARD
is inserted into the slot, the TV screen will show the message that CableCARD is
inserted and tries to download necessary data such as channel information or subscription information
from your digital cable service provider. When you insert CableCARD for the first time, this process
may take afew minutes depending
on the amount of data your cable provider needs to send.
During this process
the digital cable service provider or CableCARD may display messages on the TV
screen to help or give you further information.
Please contact your local cable provider for more information on service availability and how to
acquire aCableCARD.
NOTE
• This television receiver supports the copy protection system regulated by DTLA (Digital Transmission
Licensing Administrator).
It should be noted that copy protected content may not be viewable
depending on your particular connections.
••• English-4

Q&A
1. Is the antenna Iuse for existing TV reception good enough for DTV?
Over-the-air IOTA) digital TV broadcasting uses the same channels as analog TV and works well
with many existing
TV antennas. However, DTV broadcast channel assignments are different than
analog channels.
You should find out whether your local DTV broadcasts are on VHF (channels
2-13)
or UHF (channels 14-69) to see if you need adifferent antenna.
If your
DTV channels are on UHF and you already get good UHF reception, your present antenna
may
work fine. The same holds true for VHF DTV reception. Note that in some markets, both VHF
and UHF channels are used for DTV broadcasts.
You can find out the latest DTV channel assignments for your area by browsing selected Internet
web sites such as www.titantv.com, www.1 OOOOwatts.com, and www.fcc.gov.
2. How diHicult is it to receive DTV signals indoors?
This depends on whether your local DTV stations are running full power or not and how close your
location
is to the transmission tower. DTV receivers do not require as much signal as analog TV
receivers to produce high-quality images and sound.
Once the
DTV signal level exceeds acertain threshold at the receiver, the digital video and audio
data
is decoded at the same quality it was originally encoded for broadcast.
This is a big advantage for DTV over analog TV -there is no noise, ghosting, static, or scratchy
audio.
3. How can Iconnect an antenna in my townhouse, cooperative apartment,
condominium, or apartment?
The Federal Communications Commission's OTARD Rule (part of the Telecommunications Act of
1996) allows residents of condominiums, townhouse, or members of neighborhood associations to
put up outside antennas for reception
of broadcast TV signals as long as those antennas are not
located in common areas and are no more than
12' in height.
Residents
of rental units (apartments, etc.1 are not covered by the OTARD rules and will have to use
indoor antennas to receive DTV broadcasts. It is possible that the landlord of an apartment complex
can provide broadcast
DTV signals via amaster TV antenna system to each apartment.
4. Can Iconnect my DTV set top receiver to my cable TV service?
Cable TV systems use adifferent method for transmitting digital TV programs that is currently
incompatible with broadcast
DTV set-top receivers. So you will still need to use an outdoor or
indoor antenna to receive OTA broadcast DTV programs.
The good news is that you won't have to pay amonthly or per-program charge to watch OTA DTV
and HDTV programs. They're free, unlike subscription satellite TV or premium cable TV. All you
need
is an antenna and a DTV set-top receiver to enjoy clear, sharp widescreen images and
high-quality audio.
5. I hear aClicking sound in standby mode.
You will hear the sound if you have set both ANTENNA IAirl and Cable to "Yes" in the TV Guide
On Screen™ Setup.
However,
do not worry about this since the sound comes from inside your TV while it receives data
for your
TV Guide.
English -5 rrmrrz

ble of Contents
Your New Wide TV 10
Viewing Position 10
List of Features 11
Accessories 11
Front
Panel Indicators 12
Front (or right) side buttons 13
Side
Panel Jacks 13
Rear Panel Jacks 14
Remote Control 15
Connections 18
Connecting VHF and UHF Antennas 18
Antennas with 75-ohm
Round Leads 18
Connecting Cable
TV 19
Cable without aCable Box 19
Cable with aCable Box that Descrambles All Channels 19
Cable with aCable Box that Descrambles
Some (But Not All) Channels 20
Connecting a VCR 21
Connecting a VCR to the Video or S-Video/Audio jack 21
Connecting CableCARD 22
Connecting aCamcorder 23
Connecting a
DVD Player 24
Connecting to HDMI (High Definition Multimedia Interface) 24
Connecting to Y, PB, PR 24
Connecting to Audio and Video Jacks 25
Connecting a DTV Set-Top Box 26
Connecting to Y, PB, PR 26
Connecting to DVI (Digital Visual Interface) 26
Connecting a VCR and DTV Set-Top Box 27
Connecting to HDMI (High Definition Multimedia Interface) 27
Connecting aDigital Audio System 28
Connecting to an Analog Amplifier 29
Operation 32
Turning the TV On and Off 32
Dynamic Menus and On-Screen Displays 32
Navigating Menus by Using the Menu Map 33
Selecting aMenu Language
34
Memorizing Channels 35
Changing Channels 37
Customizing Your Remote Control 38
Remote Control Codes 42
Setting the Clock 45
Setting the On/Off Timer 47
Setting the Sleep Timer 48
Viewing an External Signal Source 49
Assigning Names to External Input Mode 50
Channel Control 52
Selecting Your Favorite Channels 52
Viewing the Channel Lists 53
Adding and Erasing Channels
54
Labeling the Channels 55
Fine Tuning Analog Channels ~ 56
Checking the Digital-Signal Strength I Digitall 57
LNA (Low Noise Amplifier) 58
Picture Control 60
Picture Control 60
Changing the Picture Size 63
••• i English - 6

Digital Noise Reduction 64
DNle (Digital Natural Image engine) 65
Setting the My Color Control Mode 66
Using the Color Weakness Enhancement Feature 68
Setting the Film Mode 69
Viewing Picture-In-Picture .70
Freezing the Picture 76
Setting the Blue Screen Mode .77
Sound Control 80
Sound Control 80
Setting the SRS TSXT 82
Auto Volume 83
Choosing aMulti-Channel Sound (MTS) track I Digital I 84
Choosing aMulti-Channel Sound (MTS) track I Analog I 85
Selecting the Internal Mute 86
Setting the On/Off Melody 87
Special Features 90
Setting the Function Help 90
Menu Transparency Level 91
~::~~ ~~V~C~~~.~.:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: ~~
U.sin~ the V-Chip for ~igital channels 103
Viewing Closed Captions (On-Screen
Text Messages) I Analog I105
0~~~~nt~eC~~b~~Akg~~~. ~~~.-~~.~~~~ .:~~~. ~~~~.~~~~~.! .~~~i.t~I.I.::::::::::::::::::::::::::::::: ::::: i g~
Using the CableCARD Setup Function 110
Using TV Guide On Screen™ 112
Using TV Guide On Screen™ Setup 113
Using the D-Net 1 16
How to connect compatible IEEE 1394 Devices 116
Connection Options 118
4-Pin and 6-Pin Connectors 119
Selecting aD-Net device 120
The D-Net control panel. 122
f:C~r~{i~g iii~:.::::::::::::::::::::::: ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: i ~~
Tips on stopping recording 126
Troubleshooting (D-Net) 127
PC Display 132
Using Your TV as aComputer (PC) Display 132
Adjusting the Picture Quality 135
Changing
the Picture Position 136
Adjusting the Picture Quality and Position Automatically 137
Changing the Picture Size (PC Mode) 138
Viewing the Current Resolution 139
Initializing the Picture Settings 140
WISELlNK 142
Using the WISELINK Function 142
Using the WISELINK Menu 143
Using the PHOTO
UPEG) List.. 144
Using the MP3 List 151
Using the Setup Menu 153
Appendix 156
Troubleshooting 156
Cleaning and Maintaining Your TV 158
Using Your TV in Another Country 158
Specifications 159
English-7 •••

f"""""""-"""''''''' ............ -.'''''''''''''' .... ''''''---''''' .. '''' ... '''''''' ...... ''''.'''''" ..
L .~':'.r N~w~de TV
ii;~'i"~~~jIt.~t>iO ;t~d ,;'t~~Iii.~;.,,,.YJ1t~t!,:
li~~~lj\

our New Wide TV
Viewing Position
To optimize your viewing comfort, please follow the guidelines below for viewing distance.
If viewing for an extended
period of time, sit as far back from the screen as possible.
,,,
,
,,
,,
///)30
0
~
G
""",)30
0JJI
D,,
~
,,,
I,,,
50" screen:
At least 5.9 feet
56" screen:
At least 6.6 feet
61" screen:
At least 7.2 feet
71" screen:
At least 8.4 feet
<Top view>
,,
SO" screen:
At least5.9feet
56" screen:
At least 6.6feet
________________ ~~~_______________ J
When installing the product, make sure to keep
it
away from the wall (more than 1 Ocm/4 inchesl
for ventilation purposes.
•Poor ventilation may cause an increase in the
internal temperature
of the product, resulting
in ashortened component life and degraded
performance.
liliiii English -10
r-----------------------------------------------------------------,
,,
<Side view>
o ,
L.1
r----------;-------------------------------'
:.

List of Features
Your TV is designed and engineered using the latest technology. It is afull-featured, high-performance
unit that exceeds industry standards.
In addition, it has these special features:
•Easy-to-operate remote control
•Dynamic, easy to navigate menus
• Easy-to-use on-screen menu system you can access from the front, right panel, or remote control
•Automatic timer
to turn the TV on and off at any time you choose
•Adjustable picture and sound settings and the ability
to memorize your favorite settings
•Automatic channel tuning for up to 181 channels
• A special filter
to reduce or eliminate reception problems
•
Fine tuning control for the sharpest picture possible
• A built-in multi-ehannel sound decoder for stereo and bilingual listening
•Built-in, dual channel speakers
• A special sleep timer
•Picture-in-Picture capability that
lets you watch two channels at once
•Widescreen
TV with adjustable image size
•Life-like clear images provided by DNle technology
•
My Color Control mode to correspond with your color preference
•Color Weakness mode
•Digital Input jack
•Digital Audio Output
(OPTICAL) jack
•CableCARD slot
•D-Net (IEEE1394)
•
TV Guide On Screen™
•Game mode
•
Easy-to-use channel manager menu.
•WISELINK enables you
to view and play photo (JPEG) and audio files (MP3) through the TV's
WISELINK jack.
Accessories
Once you have unpacked your TV, check to make sure that you have all the parts shown here.
If any piece
is missing or broken, call your dealer.
[]
,.
..
.. · ..•. '.· ••• : ..•. r ... - •...•.. ··.
,1
,~~
;,
Remote Control
(BP59-60115A)/
AAA Batteries
Warrcmty C.d/ Owner's Instrudions
Registration Card/
Safety Glide Mcmual/
Quick Guide Manual/
Power Cord
(3903-000144)
G-UNK
TIt
Cable
(MD96-G0036A)
Oath-Clean
English - 11 11.11.

our New Wide TV
Front PanelLED Indicators
The three lights on the front panel indicate the status of your TV.
The product color and shape may vary depending on the model.
HL-SS088W /HL-SS688W /HL-S6188W
Indicator Lights
....------ POWER
Press to turn the TV on and off .
• -- Remote Control Sensor
Aim the remote control towards this spot on the TV.
HL-S7178W
POWER
Press to turn the TV on and off.
---- Remote Control Sensor
Aim the remote control towards this spot on the TV.
Indicator Light Key
• : Light is On
() :Light is Blinking
o :Light is Off
STAND BY/TEMP TIMER LAMP
Indication
•0 0 Standby state.
0 0
()
The picture will automatically appear in about 15 seconds.
0•
()
Auto Timer ON/OFF has been set and the set will automatically be
turned on
in about 15 seconds.
() ()
0Acooling fan inside the
set is not operating normally.
()
0
()
Lamp cover on the rear of the set is not properly shut.
()
0 0 Check
if the ventilation hole on the rear of the set is blocked, because
if the inner temperature is too high, the power will shut off.
() ()
()
Lamp may be defective. Please contact acertified technician.
•
It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately.
•
The TV has afan to keep the inside lamp from overheating. You'll occasionally hear it working.
1111111 English - 12

Front (or right) side buttons
The buttons on the front panel control your TV's basic features, including the on-screen menu system.
To use the more advanced features, you must use the remote control.
The product color and shape may vary depending on the model.
HL-SS088W /HL-SS688W /HL-S6188W
o Press to switch between viewing TV
programs and signals from connected components.
f) Press to see the on-screen menu.
e Press to raise or lower the volume and
to select items when using the on-screen menu.
HL-S7178W
o Press to change channels and move belween items on the
on-screen menu.
4:) Press to activate (or change) a particular item.
Press to switch between viewing TV programs and signals from connected components.
Press to see the on-screen menu.
Press to raise or lower the volume and to select items when using the on-screen menu.
Press to change channels and move between items on the on-screen menu.
Press to activate (or change) a particular item.
Side Panel Jacks
Use the right side panel jacks to connect acomponent that is used only occasionally (a camcorder or
video game, for example). The product color and shape may vary depending on the model.
Connect the video signal from a camcorder or video game.
Connect the audio signal from a camcorder or video game.
You can connect a USB mass storage device to view photo files (JPEG) and
play audio files (MP3).
English - 13 ••

Your New Wide TV
Rear Panel Jocks
o CableCARD™
Insert a CableCARD into the slot. (Refer to page 22)
f) S-VIDEO INPUT jacks
Connects an S-Video signal from an S-VHS VCR or DVD player.
(Refer to page 21)
e VIDEO/AUDIO INPUT ,oacks
Connect video/audio signals rom external sources, such as VCR
or DVD players. (Refer to pages 21 and 25)
e VIDEO/AUDIO OUTPUT jacks
Sends video/audio signals from the TV to an external source,
such as a VCR. These jacks are available only in TV, Video and
S-Video modes. (Refer to pages 21 and 27)
o COMPONENT IN 1,2 jacks (Y, PB, PR, AUDIO L/R)
Use these jocks to connect the component video/audio signals
from a DVD player or a Set-Top Box. (Refer to pages 24-26)
o PC VIDEO INPUT jack
Connect these to the video output jack on your Pc.
8 PC AUDIO INPUT jack
Connect these to the audio output jack on your Pc.
(Refer to page 132)
o HDMI (High Definition Multimedia Interface)
INPUT jacks (HDMI IN 2)
Connect to the HDMI jack of a device with HDMI output.
o HDMI (High Definition Multimedia Interface)/
DVI INPUT jack (HDMI l/DVI IN)
Connect to the HDMI jack of a device with HDMI output.
These inputs can also be used as a DVI connection with separate
analog audio inputs. An optional HDMI!DVI cable will be
necessary to make this connection. When using an optional
HDMI!DVI adapter, the DVI analog audio inputs on your TV allow
you to receive left and right audio from your DVI device.
(Not compatible with PCI (Refer to pages 24, 26, and 27)
.111 English -14
~ DVI AUDIO (L/R) IN
Connect to the DVI audio output jack of an external device.
(Refer to page 26)
m DIGITAL AUDIO OUT (OPTICAL) jack
Connect to 0 Digital Audio Component. (Refer to page 28)
o G-LlNKTM
Connect the IR controller cable to the G-lINI(TM terminal on your TV.
eE) RS232C
Connection for professional linking network and service usage.
'9 D-Net (lEEE1394) S400 MPEG
Connect to externallEEE1394 digitol products such as digital
VCRs and camcorders. Two jacks are provided for this purpose,
which allow for a high degree of flexibility for connecting your
D-Net controlled system. (Refer to pages 116-130)
@ ANTENNA terminals
Two independent cables or antennas can be connected to
these terminals. Use "ANT 1 IN (CABLE)" and "ANT 2 IN (AIR)"
terminals to receive a signal from VHF/UHF antennas or your
cable system. (Refer to pages 18-19)
~ POWER IN
Connect the supplied power cord.

Remote Control
You can use the remote control up to about 23 feet from the TV.
When using the remote control, always point it directly at the TV.
You can also use your remote control to operate your VCR, Cable
box, DVD player and Set-top box. See pages 42~44 for details.
1. POWER
Turns the TV on and off.
2. Channel Number
Press to directly tune ta a particular channel.
3.
Press to select additional channels (digital
and analog) being broadcast by the same
station. For example, to select channel
"54-3", press "54", then press" -" and "3".
4. ANTENNA
Press to select "AIR" or "CABLE".
5. CH MGR
It display "Channel Manager" on the screen.
6. VCR/DVD Controls
Controls VCR or OVO functions: Rewind, Stop,
Play/Pause, Fast Forward.
7. VOL +, VOL-
Press to increase or decrease the volume.
8. MUTE
Press to mute the TV sound.
9. MENU
Displays the main on-screen menu.
10 ....., "', ..... , ~, ENTER GJ
Press to move highlight up, down, left, or
right. While using the on-screen menus,
press ENTER to activate (or change) a
particular item.
11. INFO
Press to display information on the TV
screen.
12. TV GUIDE
Press to display the TV Guide On Screen™
Interactive Program Guide (IPG).
(Refer to the TV Guide On Screen'" manual
and TV Guide On Screen'" Quick Setup Sheet
for further information on G-lINK'".)
13. P.MODE
Adjust the TV picture by selecting one of
the preset factory settings (or select your
personal, customized picture settings.)
(Refer to page 60)
14. S.MODE
Select Sound effect. (Refer to page 81)
15. MTS (Multichannel Television
Stereo)
Press to choose Stereo, Mono or SAP
(Secondary Audio Program).
16.SRS
Activates TruSurround. (Refer to page B2)
17. CAPTION
Controls the caption decoder.
18. SLEEP
Press to select a preset time interval for
automatic shut off. (Refer to page 48)
19. Mode
(TV /DVD/STB/CABLE/VCR)
Selects a target device to be controlled by
the Samsung remote control (i.e., TV, avo,
STB, CABLE, or VCR).
20. SOURCE
Press to display all of the available video
sources (TV, AV1, AV2, AV3, S-Video 1,
S-Vide02, Camponentl, Companent2, PC,
HOMIl, and HOMI2).
21. PRE-CH
Tunes to the previous channel.
22. WISELINK
This function enables you to view and ploy
photo (JPEG) and audio files (MP3) from
on external device. (Refer to page 143)
23.REC
Use to record in TV Guide menu.
(Refer to the TV Guide On Screen!" manual
and TV Guide On Screen'" Quick Setup Sheet
for further information on G-lINK'".)
24 ......... /Day- Day'+/~~
Moves forward or backwards in 24 hour
increments in the listings Grid in the TV
Guide on screen
lM
•
25.CH A/V
Press to change channels. Moves from one
set of screen information to the next in the
TV Guide On Screen
lM
•
26. EXIT
Press to exit the menu.
27. D-NET
Runs the O-Net view function.
(Refer to pages 116-130)
28. STILL
Press to pause the current screen.
(Refer to page 76)
29. P.SIZE
Press to change the screen size.
(Refer to page 63)
30. PIP (Picture In Picture)
Displays the available channels in sequence.
(These buttons change channels in the PIP
window only.)
When in the TV Guide On Screen'" mode,
toggles the state between locked and
unlocked in the Video Window.
(For further explanation, see the TV Guide
user's manual.)
31. PIP Controls
CH'" Iv: Press to display the available
channels in sequence. (These buttons change
channels in the PIP window only.)
(Refer to page 75)
32. FAV.CH (Favorite Channel)
Press to switch between your favorite
channels.
33. RESET
If your remote control is not functioning
properly, toke out the batteries and press
the reset button for about 2-3 seconds.
Re-insertthe batteries and try using the
remote control again.
34. SET
Used during set up of this remote control.
so that it will work compatibly with other
devices (Set-top box, VCR, Coble box,
avo, etc.)
(s---------~--§j~
lTV ~
: ~~:
,-----------------------,
NOTES
• The Color buttons are used
for the channel list function.
(Refer to pages 52~55)
• This is aspecial remote control
for the visually impaired, and
has
Braille points on the
POWER, VOL +, VOL-,
CH A. lv, STOp, and
PLAY IPAUSE buttons.
•
If you are using acable box,
the
TV Guide On Screen™
system needs to be able to
change channels on your cable
box
to download program
listings when the TV is not in
use. Please connect the supplied
G-LlNf(TM cable to the G-LlNf(TM
jack of the TV. After you connect
the
G-LlNf(TM cable you will be
able
to control your cable box
usinB the TV's remote.
(Refer to the TV Guide On
Screen™ Quick Setup Sheet for
further information on G-LlNf(TM.)
English - 15 _

Installing Batteries in the Remote Control
With normal use, the batteries in the remote control should last about ayear. If you notice aperformance
degradation while using the remote, the batteries may need to be replaced.
Make sure you replace both
batteries and
do not mix old and new batteries in the remote control. If you won't be using the remote
control for along time, remove the batteries and store them in acool,
dry place.
1
lift the cover at the back of the remote control
upward as shown in the figure.
Install
two AAA size batteries. Make sure to
match the
/1+/1 and /1_/1 ends of the batteries
with the diagram inside the compartment.
r.. Close the cover as shown in the figure.
",,1
NOTE
• Do not mix battery types, i.e, alkaline and manganese.
••• English - 16

Connections

· \.o.IDeetions
Connecting VHF and UHF Antennas
If you do not have acable system, you will need to connect an antenna to your TV.
Antennas with 7S-ohm Round Leads
If your antenna looks like this: •it has 75-ohm round leads.
1
Plug the antenna lead into
the
ANT 2 IN lAIR) on the
rear panel
of your TV .
••• English - 18

Connecting Cable TV
You can connect different cable systems to your TV, including cable without aCable box,
and cable with aCable box that descrambles some or all channels.
Cable without a Cable Box
Plug the incoming cable into
the ANT 1 IN (CABLE) on the
rear panel of your TV.
Cable with a Cable Box that Descrambles All Channels
Find the cable connected to
the ANTENNA OUT
terminal on your Cable box.
This terminal might be
labeled "ANT OUT", "VHF
OUT" or simply "OUT".
2
"" Connect the other end of the
cable to the "ANT 1 IN
(CABLE)" terminal on the rear
panel of your TV.
Cable Box
English - 19 m~~

Connections
Cable with a Cable Box that Descrambles Some (But Not All) Channels
To complete this connection you will need atwo-way splitter, an RF (A/B) switch, and four coaxial
cables (which you can buy from your Samsung dealer
or any electronics store).
1Find and disconnect the
cable that
is connected to
the
ANTENNA IN terminal
of your Splitter.
This terminal might be
labeled
"ANT IN", "VHF IN"
or simply, "IN". Connect this
cable to atwo-way splitter.
ANTENNA
IN
;;;;;;;;;;;;;;;Incom~,"g II- - rQ:
Cable
Splitter
Cable Box
2
3
Connect acoaxial cable
between an OUT terminal
of the splitter and the IN
terminal of the Cable box.
Connect acoaxial cable
between
the ANTENNA OUT
terminal
of the Cable box
and the B-IN terminal of the
RF (A/B) switch.
Incoming
Cable
'"~""~
Cable Splitter
Cable Box
~""-""""-"'~ee
RF(NB)
Switch
4Connect another cable
between the other OUT
terminal
on the splitter and
the A-IN terminal on the
RF (A/B) switch.
t:
Incoming t· , ~ ••...
Cable Splitter Cable Box
~
RF(NB)
Switch
5Connect the last coaxial
cable between
the OUT
terminal
of the RF (A/B)
switch and the
ANT 1 IN
(CABLE) on the TV.
~lnc;:;;;:;;loming4J:t
Cable Splitter
After you've made this connection, set the A/B switch to the "A" position for normal viewing.
Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch
to "B", you will need to tune your
Set-Top Box to the Cable box's output channel, which is usually
channel 3
or 4.)
Ii •• English -20