Samsung UN32F5500 E- Guide

E-MANUAL
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No._

e-Manual Guide
Viewing the e-Manual
1 Scrolling a Page
1 Using the Top Icons
1 Ret_rning to the Home Page
2 Searching the Index
2 Searching Pages
2 Closi _g the e-Manual
2 Jumping to a Menu item
2 Updating the e-Manual
Getting Started
Antenna Connection
Video Device Connections
4 HDMI Connection
5 Component Connection
5 AV Connection
Audio Device Connections
6 Digital Audio (Optical) Connection
7 Audio Output Connection
7 ARC (Audio Return Channel)
Computer Connection
8 HDMI Connection
9 HDMI-to-DVI Connection
Switching Between Video Sources
Programming
11 Auto Program
11 Remove Scrambled Channels
15
Restore Removed Channels
Channel Management
12 Remove Channels
13
13 Program Rating Lock
13 B ock ng Programs Usng the TV Rating
14 B ock ng based on Movie Rat J_g(MPAA)
14 Bockqg Based oJ_CanadiaJ_ Er_gsh Rating
15 B ock ng Based on Canadian French Rating
15 B ock ng Based on Downloadab e U,S, Ratir_g
15 Watching Bocked /Restr cted Programs
Rename Analog Channels
Favorite Channels
17 Add Favorite Channels
17 Remove Favorite Channels
18 Rearrange the Favorite Channels List
18 Rename a Favorite Channel List
18 Copy a Favorite Channels List
Network Configuration
19 Wired Network
20 Wireless Network
20 Wire ess Network Precautions
20 Network Secur ty Protocols
Wired Network Setup
21 Automatic Wired Network Setup
21 Manual Wired Network Setup
23 Failed Wired Connection
Wireless Network Setup
24 Automatic Wireless Network Setup
25 Manual Wireless Network Setup
27 Using the WPS Button
27 Failed Wireless Connection
Checking the Network Status
Mobile Device Connection
30 Wi-Fi Direct
30 AIIShare Settings
30 Rename the TV

Controlling the TV
Smart Touch Control
31 Inserting the Batteries (AAA X 2)
31 Connecting to the TV
32 Reconnecting the Smart Touch Contro
32 Battery Low Alarm
33 Buttons and Descriptions
35 Special Functions
Using the touchpad
36 Dragging
36 Pressing
37 Flicking
37 Pressing and Holding
37 Pressing and Dragging
38 Scrolling Up/Down
38 Scrolling Left/Right
39 Changing Channels by Entering Numbers
39 Numerca nputGuide
39 Adjusting the Touchpad
40 Show Status and Notification Banner
40 Recommended
40 History
40 Deletng History Data
40 Searching
Virtual Remote Control
41 Changing the Virtual Remote Control Panel
41 Change a position of the Virtual Remote Panel
41 Using the Number Panel
41 Using the Playback Control Panel
41 Using the Quick Access Panel
41 Adjusting the virtual remote control
Universal Remote Control Setup
42 Connecting the IR Extender
43 Add the External Device
43 Using the Universal Remote Control
43 Registered External Device Management
Entering Text using the Onscreen Keypad
44 Entering Text using the QWERTY Keypad
44 Addit ona Features
SMART Interaction
45 Precautions
45 Face Recognition
45 TV Camera Use
46 Met}on Control
46 Voice Recognit on
Voice Recognition
47 Operating Environment
48 Enabling Voice Recognition
48 Voice Recognition Tutorial
48 Basic Voice Recognition Use
48 Voice Recognition Settings
49 Interactive Voice Recognition Commands
49 Deactivating Voice Recognition
Motion Control
50 Operating Environment
51 Motion Control Environment Test
51 Motion Control Tutorial
51 Motion Control Activation
52 Using the Basic Motion Controls
52 Motion Control Options
53 Motion Control Screen
53 The ScreeJ_Composition while Viewing TV
54 The Smart Hub Screen Composition
Face Recognition
56 Face Registration
56 Face Recognition Login
Using Peripheral Devices
57 Keyboard Connection
57 Keyboard Use
58 Mouse Connection
58 Mouse Use
"iV Viewing
TV Viewing
59 Program Info
59 Change the Broadcast Signal
6O Guide
60 Change Channels
60 Change Category
60 Quick Search
60 Schedu e Viewing
60 Checking the Program nfo

61 Channel List
6I Change Channels
61 Genre
62 Change the Broadcast Signal
62 Change the Channe Lst
Schedule Viewing
63 Digital Channel Schedule Viewing
64 Gide
64 Program nfo
64 Analog Channel Schedule Viewing
64 Cancel a Schedule Viewing
64 Edit Schedule List
3D TV
65 Precautions
66 Restrict oJ_s
66 rips
67 Activating 3D Mode
67 Setting 3D Effects
PIP
Analog Screen Calibration
69 Fine Tune
Broadcast Audio Options
70 Digital Broadcast Audio Options
70 Analog Broadcast Audio Options
Sports Mode
Subtitles
71 Show Subtitles
71 Subtitle Options
71 Subtitle Display Options
TV Settings
Basic Picture Settings
72 Changing the Picture Mode
73 Picture Quality
73 AppIyi _g the Current Picture Quality Setti _gto AJ_ot_er
nput
74 Picture Size
75 Screen Position
75 Picture Off
75 Reset image Settings
Advanced Settings
Picture Options
Basic Sound Settings
80 Changing the Sound Mode
81 Adjusting the Sound Settings
81 Auto Volume
81 TV Installation Type
81 Resetting the Sound
Sound Customizer
82 Creating a Custom Sound
83 Modifying Sound Profiles
83 Managing Custom Sounds
3D Audio
Speaker Settings
84 Speaker Select
85 Digital Audio Output
85 Samsung Audio Device Connection
Clock and Timer
86 Setting the Time
87 A£o
87 Manual
87 Sleep Timer
88 On Timer
88 Off Timer
Screen Protection and Maintenance
89 Eco Solution
90 Screen Burn Protection
90 Pixel Shift
90 A to Protection Tree
91 Scrolling
91 Side (}ray
91 Auto Protection Time
Password
92 Change Password
Additional Features
93 Changing the Menu Language
93 Game Mode
93 Precaut ons and Restrictions
94 BD Wise
94 Menu Transparency
94 Sound Feedback
94 Panel Locking
94 Booting Logo
94 DivX@ Video On Demand

SMART TV Features
Smart Hub
96 Samsung Account
96 Creating a Sans ng Acce nt
96 Logging In
97 Terms and Cond}tions, Privacy Policy
97 Linking a Samsung Account to Ot-_er Accounts
97 Managing Accoc nts
98 Resetting Smart Hub
Searching
98 Keyword Search
98 Setting Search Scope
Status and Notification
99 Show Status and Notification Banner
99 Voice Recognition & Motion Contro Configuration
99 Samsung Account Configuration
99 Network Configuration
99 Notifications
Social
100 Social Settings
100 Checking the App caton
100 Connect ng a Service to a Samsung Account
101 Watching Videos
101 Friend Profile
101 Video Calling a Friend
101 Filters
Apps
102 Precautions
103 Installing Standard Applications
103 Launching an Application
103 Samsung Apps
103 Searching for Apps
103 nsta ing App icat ons
104 Apps Management
104 Ed}t My Apps
105 Deletng Appicatons
105 Managng App cation Folders
105 Application Lock/Unlock
105 Application Update
105 Setting up the App cation Auto Update
106 Fitness
106 Creating a Prof e
106 Kids
107 WebBrowser
107 Social Networks
107 Linking Servce Accounts
108 Apps Settings
108 Auto Ticker
108 Push Notfcation Settings
108 Channel--Bound Apps
108 Properties
On TV
110 On TV Settings
110 On T-V Set_p
110 Recommel_dation Notce
110 Auto Start
110 Recommendation Method
110 Adut Contents Bock
111 Starting Smart Hub
111 Watching an On-Air Recommended Program
111 Scheduled Recommended Program Info
111 Activating the Guide
111 Program Recommendations by Time
Movies & TV Shows
112 Buying Movies
112 Playing Movies
112 Parental Control
Photos, Videos & Music
113 Restrictions
114 Supported File Formats
114 USB Device Connection
114 USB Device Removal
115 Playing all the Content on a Storage Device
115 Clearing the Recent Playlist
115 Using Networked External Storage Devices
116 Allowing DLNA Device Connections
116 AIIShare
116 Exporting Video
Videos
117 Changing the view mode
117 Playlist Creation
118 Opening a Different File
118 Video Scanning
119 Show Subtitles
119 Additional Video Playback Settings
Music
120 Changing the view mode
120 Playlist Creation
121 Music Scanning
121 Opening a Different File
121 Additional Music Playback Settings

Photos
122 Changing the view mode
122 Slide Show
122 Slide Show Settings
122 Playlist Creation
123 Opening a Different File
123 Background Music
123 Mini Player
123 Additional Photo Playback Settings
Anynet+ (HDMI-CEC)
124 Precautions
125 Anynet+ (HDMI-CEC) Setup
125 Using the Anynet+ (HDMI-CEC)
125 Switching between/\J_ynet_ Devces
126 Anynet+ (HDM-CEC) Device Menu
127 ARC
Sharing Mobile Device Screens on the TV
127 Screen Mirroring
127 Moble Device Connection
Other Information
Support
128 Remote Management
129 What }s Remote S_pport?
129 How Does it Work?
130 e-Manual
130 Self Diagnosis
130 Pct_e Test
131 Sound 'R-_st
131 Motion Control Envronment Check
131 Signa Informaton
131 Reset
132 Updating the Software
132 Update now
132 Manual Update
132 Auto Update
132 Usage Mode
132 Support Info
Kensington Security Lock
Display Resolution
133 IBM
133 MAC
134 VESA DMT
Picture Size and Input Signal
Supported 3D Resolutions
135 HDMI
135 3D Format L/R, T/B
135 3D Format Frame Packing
136 Component
136 Digital Channel
136 Videos/Photos
136 HDMI PC Mode
Subtitle and Media Contents file formats, and Codec
137 Subtitle
137 External
137 Interna
138 Supported image resolutions
138 Supported music file formats
139 Video Codec
139 Other Restrictions
140 Video Decoders
140 Audo Decoders
141 3D Precautions
141 CAUTION!
142 SAFETY PRECAUTIONS
143 WARRANTY
Licenses
Troubleshooting
Screen
Sound
3D TV
Antenna (Air/Cable) Connection
PC Connection
Networking
Miscellaneous
Anynet+ (HDMI-CEC)
Apps
Photos, Videos & Music
Web Browser

Viewing the e-Manua
The embedded e-manual contains information about your TV's key features.
Navigate to the screen menu and select e-Manual (Support > e-Manual).
Select a category from the left side of the screen.
2, Select an item. The e-Manual will open on the page containing the selected information.
Words in bue refer to screen menu options and words in light blue refer to remote contro buttons,
Arrows are used to indicate the menu path, (ExampIe: Screen Menu :> Support :>e-Manual)
Scrolling a Page
To scroll a page, use of one of the following methods:
PDP 5500, LED6400 series and above
o Press the _ or _ button on the scroll bar at the right edge of the screen.
o Drag or flick up or down from the line on either the left or right edge of the touchpad. This
method is not available with LED 5500 series and 6300 series.
o Place the focus on the _ or button at the right edge of the screen, drag or flick up or down
on the touchpad.
LED 5500 and 6300 series
o Press the _ or _ button on the scroll bar at the right edge of the screen.
o Place the focus on the _ or _ button at the right edge of the screen, press the up or down
arrow button on the remote.
Using the Top mcons
Use the Back, Forward, and Opened pages icons on the top left of the screen to navigate through
pages. These icons are available when two or more pages are passed.
Returning to the Home Page
PDP 5500, LED6400 series and above
To return to the home page, select the B button on the virtual control panel or select _ on the top
right of the screen.
To seect a letter button (1_ D, _, D), press the MORE button on the Smart Touch Control to display
a panel of the Virtua Remote. Flick the Touch Pad until the Playback Contro Pane appears, seect the a
button, and then press the Touch Pad.
LED 5500 and 6300 series
To return to the home page, press the 191button or select _ on the top right of the screen.

Searching the _ndex
PDP 5500, LED6400 series and above
Select the [_ button on the virtual control panel or select on the top right of the screen to display
the index. Select a term to display the page containing the term.
LED 5500 and 6300 series
Press the [_:_button or select on the top right of the screen to display the index. Select a term to
display the page containing the term.
Searching Pages
PDP 5500, LED6400 series and above
Select the _;Zbutton on the virtual control panel or select on the top right of the screen, and enter
search criteria. Select a page from the list of search results to display it.
LED 5500 and 6300 series
Press the _i_ button or select Q on the top right of the screen, and enter search criteria. Select a page
from the list of search results to display it.
Closing the e-Manua_
PDP 5500, LED6400, 6800 and 7100 series
To close the e-Manual, press hold the IRETURH button or select X at the upper-right corner of the
screen.
LED 5500 and 6300 series
To close the e-Manual, press the EXIT button or select X at the upper-right corner of the screen.
Jumping to a Menu totem
To directly jump to the menu item that is described in the current section, select It is possible
to jump from a menu item directly to the related section in the e-Manual.
PDP 5500, LED6400 series and above
On the screen menu, press the MORE button on the Smart Touch Control and then select e-Manual on
the virtual control panel that appears on the screen.
LED 5500 and 6300 series
On the screen menu, press the E_MANUAL button that appears on the screen.
Ths feature may not be ava abe, dependng on the menu_
Updating the e-ManuaM
Open the Smart Hub and select Apps, and then select More Apps. The e-manual can be updated in
the same way with an application update.
On the More Apps screen, select Update Apps. Select e-Manual from the list. The e-Manual starts
updating to the latest version. However, Update Apps appears on the screen only when the update is
required.

Antenna Connection
Refer to the diagram and connect the antenna cable to the antenna input connector. Make sure that you
do not bend the cable. The number of connectors and their names and locations may vary depending
on the model.
Connect the correct antenna cable for your viewing environment (over-the-air or cable broadcasting).
However, an antenna connection is not necessary if you are using a cable box or satellite receiver.
The displayed image may differ depending on the model.
Video Device Connections
This TV has a wide range of connectors for video input from video devices such as Blu-ray players,
DVD players, camcorders and gaming consoles. Below is a list of featured connectors shown in
descending order of picture quality.
,HDMI
o Component
,AV
Connect the video device to the TV via an HDMI connector for the best picture quality. If the device
does not have an HDMI connector, try a component connector to get the next best possible picture
quality.
The number of connectors and their names and locations may vary depending on the model.
When connecting an external device, refer to the device's operating manual. The number of external
device connectors and their names and locations may vary depending on the manufacturer.

HDMI Connection
Refer to the diagram and connect the HDMI cable to the video device's HDMI output connector and the
TV's HDMI input connector. One of the following HDMI cable types is recommended:
o High-Speed HDMI Cable
o High-Speed HDMI Cable with Ethernet
Use an HDMI cable with a thickness of 14 mm or less. Using a non-certified HDMI cable may result in
a blank screen or a connection error.
Some HDMI cables and devices may not be compatible with the TV due to different HDMI specifications,
This TV does not support the HDMI Ethernet Channe,
The displayed image may differ depending on the model.

Component Connection
Connect the TV's component video and audio input connectors to the external device's component
video and audio output connectors using a component cable, so that the connectors of the same color
connect to each other, as shown in the figure.
The displayed image may differ depending on the model.
AV Connection
Refer to the diagram and connect the AV cable to the TV's external input connectors and the device's
AV output connectors. Certain models combine the external video input connector and the component
Y connector into a single connector. If this is the case, connect the video cable to the Y connector.
The displayed image may differ depending on the model.

Audio Device Connections
This TV has a wide range of connectors for audio input from devices such as amplifiers, Blu-ray
players and DVD players. For better audio quality, it is a good idea to use an AV receiver.
o Digital Audio (Optical)
Audio
ARC (Audio Return Channel)
The number of connectors and their names and locations may vary depending on the model.
When connecting an external device, refer to the device's operating manual. The number of external
device connectors and their names and locations may vary depending on the manufacturer.
Digital Audio (Optical} Connection
Refer to the diagram and connect the optical cable to the TV's digital audio output connector and the
device's digital audio input connector.
Connecting the device using an optical cable does not automatically turn off the TV speakers. To turn
off the TV speakers, open the Speaker Select (Sound > Speaker Settings > Speaker Select) menu,
then set External Speaker.
Adjust the audio device's volume using its remote control.
An unusual noise coming from the audio device while it is being used may indicate a problem with the
audio device itself. If this is the case, ask for assistance from the audio device manufacturer.
5.1-channel audio for digital channels is only available with broadcasts that support 5.1-channel audio.
The displayed image may differ depending on the model.

Audio Output Connection
Refer to the diagram and connect the audio cable to the TV's audio output connector and the device's
audio input connector.
The displayed image may differ depending on the model.
ARC (Audio Return Channel}
The ARC function is not available for LED 5500 series model.
This TV supports 3D and ARC (Audio Return Channel) functions via an HDMI cable. ARC enables
digital sound to be output using just an HDMI cable. However, ARC is only available through the HDMI
(ARC) port and only when the TV is connected to an ARC-enabled AV receiver. Connect the HDMI
cable to the TV's HDMI (ARC) connector and the device's HDMI output connector.
The displayed image may differ depending on the model.

Computer Connection
This TV supports the HDMI/DVI port for connect the computer. Not all computers are HDMI-enabled.
In this case, use an HDMI-to-DVl cable to connect the computer to the TV. Refer to the "Display
Resolution" for information on the resolution settings supported to the TV.
HDMm Connection
Refer to the diagram and connect the HDMI cable to the TV's HDMI input port and the computer's
HDMI output port.
The displayed image may differ depending on the model.

HDM -to-DVm Connection
Refer to the diagram and connect the HDMI-to-DVI cable to the TV's HDMI (DVI) port and the
computer's DVl output port. The HDMI-to-DVl connection is available through the HDMI (DVl) port
only.
DVl cannot carry audio. To listen to the computer sound, connect the external speaker to the
computer's audio output connector.
The displayed image may differ depending on the model.

Switching Between Video
Press the SOURCE button to switch between devices connected to the TV.
For example, to switch to a game console connected to the second HDMI connector, press the
SOURCE button. From the Source list, select HDM_2. The connector names may vary depending on the
product.
Select Tools at the upper-right corner of the Source screen to access the following functions.
. Edit Narae: You can rename devices connected to the TV to more easily identify external sources.
With a computer connected to the TV's HDMI (DVI) port via an HDMI cable, for example, you can
change Edit Name to PC.
With a computer connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for example,
you can change Edit Name to DW PC.
With an AV device connected to the TV's HDMI (DVl) port via an HDMI-to-DVI cable, for
example, you can change Edit Name to DW Devices.
. information: View detailed information about the connected devices.
. Refresh: Select this if a connected device does not appear in the list. If the list does not show the
device after selecting Refresh, check the status of the TV-to-device connection.
. Remove USB: Remove the USB device from the list to safely. This function is only available when
the USB device selected.
To add a new external device to control it with the Touch Remote Control, press the SOURCE button
and select Universal Remote Setup on the top right of the screen. Using the universal remote control,
users can control external devices connected to the TV, such as a set-top box, Blu-ray player, and AV
receiver. For details, see "Universal Remote Control Setup".

Programming
Scan and index available channels.
The dispIayed image may differ depending on the modet,
You can also remove channels from the index, restore removed channels and designate favorite
channels for a more convenient TV viewing experience. Programming is not necessary if you are
connected to a cable or satellite receiver.
Auto Program
Screen Menu > Broadcasting > Auto Program
Automatically scans and indexes all channels received through the TV's antenna input connector.
To start, navigate to Broadcasting and select Auto Program.
2. Select Start when prompted with a message. This initiates the Auto Program function. The
process can take up to 30 minutes to complete. If Starting the Auto Program function when there
is an existing index of channels overwrites the previous index.
Remove Scrambled Channels
Screen Menu > Broadcasting > Channel Settings > Clear Scrambled Channel
Remove scrambled channels (ex: pay-per-view channels) from channel list. To remove scrambled
channels, run this function. This function is enabled only for cable TVs when at least one digital
channel is available.

Channel
Screen Menu > Broadcasting > Edit: Channel
The dispIayed image may differ depending on the modet,
Remove channels from the index, restore removed channels, and rename analog channels. The Edit
Channel screen icons indicate the following:
o"An analog channel
@"A favorite channel
e"A locked channel
In the Edit Channel screen, select the Virtual Remote panel's or the regular remote's TOOLS button to
access the following options:
Antenna: Choose between Cable and Air.
o Category: The TV's channel index is divided into different categories such as All, Added Cho,
Recently Viewed and Mostly Viewed. Choose a category.
o Edit Favorites: You can designate frequently watched channels as favorites. For details, see
"Favorite Channels".
o information: View detailed information about the current program.
Remove Channels
Remove registered channels from the index. Removing channels appearing in the Recently Viewed or
Mostly Viewed list clears the channels from the list only and does not remove them from the index.
From the screen, select the channels you wish to remove. Unselect channels by choosing them
again.
2, Select the _} button on the virtual control panel or press the _ button on regular remote control.
The selected channel(s) will be deleted.

Restore Removed Channels
Restore removed channels. Removed channels are displayed in gray on the ANI list. In addition, the Add
option is only available for removed channels.
From the screen, press TOOLS button. Select Category and then select ANI.
2_
3_
From the All list, select the channels you wish to restore. Unselect channels by choosing them
again.
Select the _ button on the virtual control panel or press the #3 button on standard remote
control. The selected channel(s) will be added.
Program Rating Lock
Screen Menu > Broadcasting > Program Rating Lock
The Program Rating Lock blocks programs with ratings higher than those desired. This is useful for
controlling what children watch on TV. This will not function for programs originating from external
sources, such as DVD players or USB files.
This PIN is required to watch a blocked program.
The Program Rating Lock is available only in TV mode.
Blockin9 Programs Usin9 the IV Ratin9
To block content, select a rating entry to lock. All programs at that level and higher are blocked and
require the PIN to watch. To unblock a category, select the lock icon. To unblock all the categories in a
row, select the lock under ALL.
Categories on the left:
o TWY: Young children
TWY7: Children 7 and over
TWG: General audience
TWPG: Parental guidance
TW14: Viewers 14 and over
TWMA: Mature audience
Categories on the top:
ALL: Lock all TV ratings.
FV: Fantasy violence
V: Violence
S: Sexual situations
L: Adult Language
D: Sexually Suggestive Dialog

Blocking based on Movie Bating (MPAA)
Block movies based on their MPAA rating. This applies to all material with supplied ratings in the USA.
From the MPAA:
"The Motion Picture Association of America (MPAA) has implemented a rating system that provides
parents or guardians with advanced information on which films are appropriate for children."
Select a lock beside one of the rating categories to block that category and all higher categories. To
unblock a category, select the lock icon.
o G: General audience (no restrictions).
PG: Parental guidance suggested.
PGm13: Parents strongly cautioned.
R: Restricted. Children under 17 should be accompanied by an adult.
NC-17: No children under age 17.
X: Adults only.
NR: Not rated.
Blocking Based on Canadian English Bating
Block material based on its English Canadian rating. This applies to all rated material viewed on
English-Canadian TV channels.
Select a lock beside one of the rating categories to block that category and all higher categories. To
unblock a category, select the lock icon.
6: Programming intended for children under age 8
68+: Programming generally considered acceptable for children 8 years and over to watch on
their own
G: General programming, suitable for all audiences.
PG: Parental Guidance
14+: Programming containing themes or content which may not be suitable for viewers under the
age of 14
18+: Adult programming