Samsung DC68-02196A User manual

FEATURES 1
SAFETY INSTRUCTIONS 2
DESCRIPTION OF PARTS 3
CONTROL PANEL 4
WASHING PROCEDURE 5
Fuzzy(Digital) course 5
Blanket course 5
Super clean course 5
Speedy course 5
Wool course 5
Delay start course 6
Silver Wash button 6
MANUAL FUNCTIONS 7
INSTALLATION & MAINTENANCE 8
Environ ent 8
Levelling 8
Connecting the water supply hose 8
Asse bling the rat protection panel 9
In case of pu p-drained washer 9
Connecting the drain hose 9
How to put the detergent in 9
Water supply connector filter 10
Cleaning the filter net. 10
How to clean the filter 10
TROUBLESHOOTING 11
SPECIFICATIONS
Please read this manual before using and note
how to use in the proper manner.
Please be careful of keeping the manual.
Otherwise, it should be bought separately.
WASHING MACHINE
User’s Manual
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
Register your product at
www.sa sung.co /global/register
CODE NO. : DC68-02196A

THE SILVER WASH SYSTEM
• This is a wash control syste that enables to kill bacteria hidden in the cloth during the wash or rinse,
to protect hu an skin fro har ful bacteria through the antibiotic coating by SILVER WASH, and to real-
ize a pleasant, healthy sanitization.
This syste also prevents propagation of bacteria through antibiotic coating on the washed cloth.
FUZZY DIGITAL) CONTROL
• Fuzzy control operates with best washing course
by sensing the washload like artificial intelligence.
TRANSPARENT WINDOW
• This Transparent Window is the new concept to solve the curiosity
of users to see inside of washing achine while operation.
While operation, the laundry progress inside of washing achine can be checked by
looking through the transparent window.
PULSATOR
• The Pulsator helps water and detergent to go through fabrics efficiently
while providing both the powerful water action to clean larger and heavier clothes and
the gentle water action to clean all delicates with less wear and tear on clothes.
WATERFALL FLOW
• The Waterfall Flow injected fro under the pulsator cascades with full force back into the tub,
pushing down any clothes that float right under the water surface. It is this Waterfall Flow that
enables this washing achine to effectively wash large and heavy ite s, such as bluejeans
and blankets.
MAGIC FILTER
• This unique agic Filter ensures that all the lint inside the tub is captured for top quality filtering
results to deliver consistently effective cleaning results.
SUPER CLEAN
• Use for clean washing.
• Water is supplied to oderate level and then five ti es ore while washing.
AUTO RESTART
• The power is turned on auto atically after power failure.
CHILD-LOCK FUNCTION
This is a device to protect children from being accidentally hurt while playing with the washer.
• How to start the Child-Lock function:
- Press the "Power" button to go to an initial washing ode.
-
By pressing "Start/Hold" button, you start washing and in case Child Lock function is needed during the laundry
- Press both the "Water level" and "Function" buttons at the sa e ti es.(for 3 seconds)
(Note: You cannot perfor the function without the "Power" button on.)
• In the event that you would like to odify the Child-Lock function, "L" signal flashes in the "signal window show-
ing the rest of the set ti e" every two seconds, which eans it is locked and indicates how uch ti e is left
until the function is released.
• To release the function of Child-Lock:
- In case the "Child-Lock" is progra ed, press both the "Function" and "Water level" buttons at the sa e ti e.
1
FEATURES

SAFETY INSTRUCTIONS
WARNING
There might be serious injury or fatal accident when
you violate this instruction.
• If the plug (power supply cord)is da aged,it ust
be replaced by the anufacturer or its service
agent or a si ilarly qualified person in order to
avoid a hazard.
• Do not pull the cord off or touch it with oist hands.
-An electric shock or a fire ay take place.
• Do not bend the power supply cord by force or
press it with heavy things.
-An electric shock or a fire ay take place.
• Do not install the washer nearby electric i ple ent
or don’t put a candle light or cigarette light on the
washer.
-A fire ay take place.
• Do not disasse ble, repair or re odel it recklessly.
-When you need to repair it, please call service
agent. An electric shock or a fire ay take place.
• During operation, do not put your hands or etal
aterials under the washer.
-You ay be hurt by spinning board beneath the
washer.
• Stay away fro the washer when the botto of
the washer sinks into the water.
-There ight be an electric shock. Please wait
until the water drains out co pletely.
• Do not put laundry stained with gasoline, ben-
zene, or alcohol in the washer, and keep the
aterials away fro the washer.
-An explosion or a fire ay take place.
• During spinning, don’t put your hand in the spinning tub.
-It ay hurt your hands. If it does not stop within
15 seconds after you open the lid, call service
agent i ediately.
• This appliance is not intended for use by young
children or infir persons unless they have been
adequately supervised by a responsible person to
ensure that they can use the appliance
safely.Young children should be supervised to
ensure that they do not play with the appliance.
• This appliance has to be connected to the plug
endurable to proper power consu ption.
• This appliance has to be positioned so that the
plug is accessible after installation.
CAUTIONS
There might be a slight injury or damage when you
violate this instruction.
• Don’t install it in the area with oisture or outdoor
where it has rain or snow
-An electric shock or a fire ay take place.
• Please unplug the power supply cord when you
do not use it.
-An electric shock or a fire ay take place.
• If there is dust or water on the power supply plug
and its connected part, please re ove it co -
pletely.
-An electric shock or a fire ay take place.
• Do not ake your kids look into the inside of the
washer.
-If your kid falls into the washer, his life could be
in danger.
• Ventilate i ediately without touching the power
plug if gas is leaking.
-An electric shock or a fire ay take place if it
catches fla e.
• If the washer akes strange noise, s ell or
s oke, unplug it pro ptly and call service agent.
-An electric shock or a fire ay take place.
• When cleaning, don’t spray water to the parts of
the washer directly.
-It ay ake it’s life span shorten. Also an electric
shock or fire ay take place
• Don’t use several appliances together with an outlet.
-A fire ay take place due to unusual heat.
• Don’t press the button with an awl or pin.
-An electric shock or a fire ay take place.
• Use the new hose-sets and old hose-sets should
not be reused.
• Connect the grounding wire to the shell plate, and
bury it under at least 25c of earth:elternatively,
connect the ground wire to the appropriate pin on
a properly grounded power receptacle. Never con-
nect the wire to a telephone line, lightning rod, or
gas pipe.
Please note that the following precautions for safety intend to prevent unpredictable danger and da age
by helping the proper use in safety.
When using hot water in washing, please ake sure that the water should not exceed 50˚C.
• Plastic parts ay be defor ed or da aged, and an electric shock or a fire ay take place.
2

3
DESCRIPTION OF PARTS
DRAIN-HOSE PUMP)
WATER SUPPLY HOSE COLD)
LID
Be sure to keep the lid
closed during washing
and spinning.
Lint will be collected in
the filter during
washing.
FILTER
DETERGENT BOX
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
GROUND LEAD When the water pipe is etal, ake sure to cover the end of the ground wire.
POWER CORD
WATER DRAIN HOSE
RAT PROTECTION
PANEL
SPIN BASKET
ADJUSTABLE LEGS
Adjust the length
of the legs when
installing the washer.
FRONT CONTROL
PANEL
PULSATOR
WATER SUPPLY HOSE HOT)

For more details, see control panel of your washing machine.
4
CONTROL PANEL
POWER BUTTON
Press this button once to operate.
Press once again to turn the power off.
START/HOLD BUTTON
Use to pause and restart the operation.
To change the washing procedure during operation, press this button to stop,
and once again to restart after changing the procedure.
DELAY START BUTTON
Press this button when delay start washing is needed.
COURSE SELECT BUTTON
With every press of this button, the washing course changes;
FUZZY(DIGITAL) ➔ BLANKET ➔ SUPER CLEAN ➔ SPEEDY ➔ WOOL ➔ FUZZY(DIGITAL)
SILVER WASH BUTTON
A course where silver water is supplied in washing as well as the last rinse,
featuring sterilization and antibacterial coating.
This is available for all courses except the Wool course.
FUNCTION SELECT BUTTON
With every press of this button, the function changes:
SOAK&WASH&RINSE&SPIN ➔ WASH ➔ RINSE ➔ SPIN ➔ WASH&RINSE ➔ RINSE&SPIN ➔
WASH&RINSE&SPIN ➔ SOAK&WASH&RINSE&SPIN
WATER LEVEL SELECT BUTTON
According to the washload,select the water level ;
MEDIUM ➔ HIGH ➔ MAXIMUM ➔ EXTRA LOW ➔ LOW
WATER SUPPLY SELECT BUTTON
As you press this button, the type of water is selected as follows.
COLD ➔ COLD + HOT ➔ HOT ➔ COLD
REMAINING TIME INDICATOR LIGHT
The indicator light shows the re aining ti e (in inutes) of each wash cycle.
At the end of the cycle,the power auto atically switches off.
POWER
START/
HOLD
DELAY
START
COURSE
SILVER
WASH
FUNCTION
WATER
LEVEL
WATER
SUPPLY

5
WASHING PROCEDURE
Before starting washing, check the following;
Connect the water supply hose to the water tap. Leave a tap
open. Plug the power cord in. Make sure to lay down the
drain hose. (In case no drain pu p)
Put the laundry into the washer and add detergent, too.
Be careful not to overload. Use right detergent
for the fabrics you are washing.
FUZZY DIGITAL) COURSE
Selects the best washing course
automatically.
1. Press the POWER Button to"ON".
2. Press the START/HOLD button.
Water level is selected automatically.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/ OLD
button again.You can change the course when paused.
3. Close the lid.
❈ Select the Silver Wash button to perform anti-bacteria
washing.
BLANKET COURSE
1. Press the power button to "ON".
2. Press the course select button once.
3. Press the START/HOLD button
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/ OLD
button again.You can change the course when paused.
4. Close the lid.
❈ Select the Silver Wash button to perform anti-bacteria
washing.
SUPER CLEAN COURSE
Use for cleaner washing.
1. Press the power button to "ON".
2. Press the course select button two ti es.
3. Press the START/HOLD button and put
the proper a ount of detergent into tub.
Water level is selected automatically.
Water level is only selected MAXIMUM ~ MEDIUM.
4. Close the lid.
The washing finishes by the time you reserved.
❈ The tempering feature is included in the Super Clean
course. This is why the additional tempering course is
not selected.
❈ Select the Silver Wash button to perform anti-bacteria
washing.
SPEEDY COURSE
Because washing is speedy, it is
good for light or less stained laundry.
1. Press the power button to "ON".
2. Press the course select button three ti es.
3. Press the START/HOLD button
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/ OLD
button again.You can change the course when paused.
4. Close the lid.
❈ Select the Silver Wash button to perform anti-bacteria
washing.
WOOL COURSE
1.Press the power button to "ON".
2.Press the course select four ti es.
3.Press the START/HOLD button.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/ OLD
button again.You can change the course when paused.
4. Close the lid.
CAUTION . . .
-Do not use water above 30˚C for WOOL washing.
-Refer to the tag attached on the clothes for washing
information.
-Fasten buttons and turn inside out before washing.
-Use the detergent indicated in the laundry.
-When the degree of dirt is extreme, soak the laundry in warm
water for about 10 minutes before pressing the WOOL course
button in order to enhance washing efficiency.
❈ In the Wool course, the Silver Wash course does not
work as it could damage the washed items.
POWER COURSE START/
HOLD
POWER COURSE START/
HOLD
POWER COURSE START/
HOLD
POWER START/
HOLD
POWER COURSE START/
HOLD

6
WASHING PROCEDURE
DELAY START
Select this course when
you have to go out or do something else.
1. Press the power button to "ON".
2. Press the course select button.
3. Press the DELAY START button once.
You may change the delay start time with
use the DEALY START button. (from 3 hours to 18 hours)
4. Press the START/HOLD button and put
the proper a ount of detergent into tub.
5. Close the lid.
The washing finishes by the time you reserved.
SILVER WASH BUTTON
A course where bacteria hidden
inside the laundry are removed before it is Silver Wash-coated
for avoiding the propagation of harmful germs.
1. Press the power button to "ON".
2. Press the SILVER WASH button.
3. Press the START/HOLD button.
4. Close the lid.
- This can only be selected when WAS , RINSE
and SPIN are all selected.
- When the Silver Wash course is selected, manual-
ly selecting the (function) keys is not allowed.
- This toggles On/Off each time the button is pressed.
- This is available as an option for all courses other than the
Wool course.
POWER SILVER
WASH START/
HOLD
COURSE
POWER START/
HOLD
DELAY
START

7
MANUAL FUNCTIONS
Each washing course changes anually.
Ex) If you want to wash in the speedy course : Power - Select speedy course - Wash - Start/Hold button
POWER COURSE
FUNCTION
once
twice
START/
HOLD
POWER FUNCTION
START/
HOLD
three ti es
four ti es
POWER FUNCTION
START/
HOLD
POWER FUNCTION
START/
HOLD
five ti es
POWER FUNCTION
START/
HOLD
six ti es
POWER FUNCTION
START/
HOLD
SOAK FUNCTION (Including WASH, RINSE, SPIN)
Press the POWER button.
Select the course(Press the course button).
➔ FUZZY(DIGITAL), BLANKET, SUPER CLEAN, SPEEDY, WOOL
Press the FUNCTION SELECT button once.
Press the START/HOLD button once.
Water level is selected auto atically.
Washing,rinsing, and spinning follow.
❈ When the Silver Wash course is selected, the tempering feature is already
included in this course so manually selecting Tempering is not allowed.
WASH ONLY
Press the POWER button.
Press the FUNCTION SELECT button twice.
Press the START/HOLD button once.
Washing goes on for 18 inutes.
When the FUNCTION button is pressed during washing, the wash
ti e can be changed to between 3 and 25 inutes in duration.
RINSE ONLY
Press the FUNCTION button three ti es.
Press the START/HOLD button once.
Rinsing goes on for 15 inutes.
When the FUNCTION button is pressed during rinsing, the rinse
ti es can be changed to between 1 to 5 ti es in duration.
SPIN ONLY
Press the FUNCTION button four ti es.
Press the START/HOLD button once.
Spin drying goes on for 11 inutes.
When the FUNCTION button is pressed during spinning,
the spin ti e can be changed to fro 1 to 7 inutes.
WASH AND RINSE
Press the FUNCTION button five ti es.
Press the START/HOLD button once.
Washing and rinsing go on for 38 inutes.
When the FUNCTION button is pressed during working, the rinse
ti es can be changed to between 1 to 5 ti es in duration.
RINSE AND SPIN
Press the FUNCTION button six ti es.
Press the START/HOLD button once.
Rinsing and spin drying follow.
When the FUNCTION button is pressed during working, the rinse
ti es can be changed to between 1 and 5 ti es in duration.

The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
8
INSTALLATION & MAINTENANCE
• If the washer is not leveled with the ground, it akes the achine tre ble ore or be out of order.
So, ake sure that the washer is leveled properly.
ENVIRONMENT
Leave some space
Maintain at least 10c between the washer and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak surface,
noise or vibration occurs. (Allowable is 1˚)
Adjust the legs for even placement.
Never install the washer near water.
Do not place the washer in stea y roo s or where the
washer is directly exposed to rain.Moisture ay destroy the
electrical insulation causing an electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic and electrical co ponents are affected by direct
heat,never place the washer near furnaces, boilers, etc.
Do not place under direct sunlight.
LEVELLING
LockLoosen
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
1. Adjust the side horizontally
first and the front
in sa e direction ❷next.
2. If the thread is not
within the li it, adjust
the height of
the legs.
• Open the lid of the achine, pour water into the tub up to the level
just below the pulsator, and adjust the legs so that the pulsator is
positioned at the center of the water as shown in the figure.
• Place the achine ore than
10c away fro the wall.
• Adjust the legs on feet
for levelling .
Note : The appliance is to be connected to the water ains using new hose-sets and that old hose-sets should not be
used.
1. Re ove the adaptor
fro the water supply hose.
2. First,using a "+" type screw
driver, loosen the four screws
on the adaptor. Next,take the
adaptor and turn part(b) fol-
lowing the arrow for gap about
5 between the .
3. Connect adaptor to the
water tap by tightening the
screws fir ly. Then, turn
part (b) following the arrow
and put (a) and (b)together.
4. Connect the water supplyhose
to the adaptor. Pull down the
part (c) of the water supply
hose .When the part (c)is
released, the hose is auto ati-
cally connected to the adaptor
aking a 'click' sound.
a
b
a
b
c
CONNECTING THE WATER SUPPLY HOSE
5. Connect the other end of the water
supply hose to the inlet water valve
at the back of the washer.
Screw the hose clockwise all the
way in.
5-1.Connect the other end of the water
supply hose to the inlet water valve
at the top of the washer.
Screw the hose clockwise all the way in.
If the water tap is a screw type,assemble
a water supply hose that fits to the
tap as shown.
NOTICE After completing connection, if water leaks from the hose,
then repeat the same steps.
Use the most conventional type of faucet for water supply.
In case the faucet is square or too big,remove the spacing
ring before inserting the faucet into the adaptor.

Install the drain hose in the
position of about 90~100c
above the ground.
9
CONNECTING THE DRAIN HOSE
After pressing the joint ring(a), insert the drain hose(b)
to drain direction.
(a)
(b)
70~80c
Be sure to join tightly the drain
hose into the drain-outlet
on the side of the achine.
Be sure to join tightly the drain hose into
the drain-outlet on the back of the
achine.
Take out the cap-hose and
connect the outlet-hose.
IN CASE OF PUMP-DRAINED WASHER
cap-hose
outlet-hose
ASSEMBLING THE RAT PROTECTION PANEL
1.Insert the rat
protection panel
to the asse bling
hole on front side
to the end.
2.If you have difficulty
inserting the panel
lift up the washer a
little and insert it
90~100c
1.Open the detergent box by pulling in the direction of the arrow as shown in the
figure and then put the powder detergent in the detergent box.
2. Put in one-ti e a ount of detergent evenly so the detergent ay not bri over the box.
HOW TO PUT THE DETERGENT IN
Detergent Device
Put the detergent
in proportion to
water level
Softener Device
Softener
baseline
CAUTION : If softener is stored over the above base line, it ay flow down at any ti e.

10
WATER SUPPLY CONNECTOR FILTER
1. Pull out the filter and wash well. 2. Pull in the filter and connect
the hose to the inlet water
valve tightly.
inlet water
valve
3. Check if there is a leakage.
Note to tighten up the
connector.
CLEANING THE FILTER NET Clean the filter net often to keep the washer clean.
1. Push the upper part
of the filter and pull in. 2. Open the cover as shown in the figure. 3. Clean the filter. 4. Close the cover and insert the
lower part of the filter in the
basket first and then push the
filter with "click" sound .
HOW TO CLEAN THE FILTER
1. Place a rag under the washer filter not to wet the floor.
2. Rotate the filter counterclockwise
and pull out the filter.
3. Re ove dirts and rotate
the filter clockwise
until it locks in position.
pump drained washer)
1.Place a rag under washer filter not to wet the floor.
2.Turn the filter-cap to the left.
3.Take the filter out and
re ove dirts.
4. Reasse ble in
reverse order.
open close

Washing machine won't work
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is there enough water?
Water is not supplied
Is the water tap opened?
Is the water cut off?
Is the water supply hose or hose
connection clogged?
Is the water tap frozen?
If water is not supplied in 1 hour,a
buzzer will sound, and the remaining
time indicator will show "4E".
Water dose not drain
Is the drain hose down?(No pu p)
Is the drain hose frozen?
Is the drain hose clogged?
If the water dose not drain in 15
minutes, a buzzer will sound,
and the remaining time indicator
will show "5E".
Spinning does not work
Is the laundry spread out evenly
in the washer?
Is the washer set on a sturdy
flat surface?
Water is overflowed
Restart after spinning.
If the error sign still indicates,
call agency.
11
TROUBLESHOOTING

IN CASE THE NEED FOR SERVICING ARISES.
If any proble occurs with your products,do not hestitate to call any nearby.
Na e, address, telephone nu ber is required.
POWER
CONSUMPTION
DIMENSIONS( )
WEIGHT
270W
W605xD665xH1000
42 kg
0.05~0.78 MPa
(0.5 ~ 8.0 kg . f/c 2)
STANDARD
WATER LEVEL
WATER PRESSURE
WATER USAGE
195 l
100 rp
680 rp
WASHING TYPE Stirring Type
PULSATOR
ROTATING SPEED
SPIN SPEED
SPECIFICATIONS
SPIN
WASH
HIGH
MED
LOW
EXTRA LOW
62 l
MAXIMUM
75 l
426W
53 l
42 l
28 l