Samsung WM1245A User manual

Washing Machine
Owner’s Instructions
WM1245A

Safety Precautions
● SAVE THESE INSTRUCTIONS
Congratulations on your purchase of this Samsung washing machine. These Owner's
Instructions contain valuable information on the installation, use, and care of this appliance.
Please take the time to read these instructions so that you can take full advantage of the
washing machine's features and enjoy this appliance for many years to come.
Before using the appliance
•Packing materials can be dangerous to children; keep all packing material (plastic bags,
polystyrene, etc.) well out of the reach of children.
•The appliance is designed for home use only.
•Make sure that water and electrical connections are made by qualified technicians,
observing the manufacturer's instructions (see "Installing the Washing Machine" on
page 2) and local safety regulations.
•All packaging and shipping bolts must be removed before the appliance is used. Serious
damage may occur if they are not removed. See "Removing the shipping bolts" on page 3.
•Before washing clothes for the first time, you must run a complete cycle without clothes.
See "Washing for the first time" on page 7.
Safety instructions
•Before cleaning or carrying out maintenance, unplug the appliance from the electrical
outlet or set the Power button to Off.
•Make sure that the pockets of all clothing to be washed are empty.
Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause
extensive damage to the appliance.
•Always unplug the appliance and turn off the water after use.
•Before you open the door of the appliance, check that the water has drained. Do not
open the door if you can still see water.
•Pets and small children may climb into the appliance. Check the appliance before each
use.
•The glass door becomes very hot during the washing cycle. Keep children away from
the appliance while it is in use.
•Do not attempt to repair the appliance yourself. Repairs made by inexperienced or
unqualified persons may cause injury and/or make more serious repairs to the
appliance necessary.
•If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or
its service agent or a similar qualified person in order to avoid a hazard.
•This appliance should only be serviced by an authorized service center, and only
genuine spare parts should be used.

SAMSUNG Washing Machine Owner’s Instructions 1
Safety Precautions------------------------------------------- inside cover
lnstalling the Washing Machine ------------------------------------------2
Unpacking the washing machine ----------------------------------------------------2
Overview of the washing machine --------------------------------------------------2
Selecting a location -------------------------------------------------------------------- 3
Adjusting the leveling feet ------------------------------------------------------------3
Removing the shipping bolts --------------------------------------------------------3
Connecting the water supply hose ------------------------------------------------ 4
Connecting the water supply hose ------------------------------------------------- 5
Drain hose connection procedures ------------------------------------------------ 6
Positioning the drain hose ----------------------------------------------------------- 6
Washing a Load of Laundry ------------------------------------------------ 7
Washing for the first time ------------------------------------------------------------- 7
Putting detergent in the washing machine --------------------------------------- 7
Overview of the control panel ------------------------------------------------------ 8
For the silver wash washing ----------------------------------------------------- 9
Childlock (button lock function) -------------------------------------------------- 10
Washing clothes using Fuzzy Logic --------------------------------------------- 10
Washing clothes manually --------------------------------------------------------- 11
Using dry course ----------------------------------------------------------------------12
Using delay start --------------------------------------------------------------------- 13
Using clean tub ----------------------------------------------------------------------- 13
Washing tips and hints ------------------------------------------------------------- 14
Maintaining the Washing Machine --------------------------------- 15
Draining the washing machine in an emergency ----------------------------- 15
Repairing a frozen washing machine -------------------------------------------- 15
Cleaning the exterior ---------------------------------------------------------------- 15
Cleaning the detergent drawer and recess ----------------------------------- 16
Cleaning the debris filter ------------------------------------------------------------ 16
Cleaning the water hose mesh filter --------------------------------------------- 17
Troubleshooting ----------------------------------------------------------------- 18
Problems and solutions ------------------------------------------------------------ 18
Understanding error messages --------------------------------------------------- 18
Programme chart ------------------------------------------------------------- 19
Appendix ------------------------------------------------------------------------------ 20
Fabric care chart --------------------------------------------------------------------- 20
Electrical warnings ------------------------------------------------------------------ 20
Protecting the environment -------------------------------------------------------- 21
Declaration of conformity ---------------------------------------------------------- 21
Specification --------------------------------------------------------------------------- 21
Table of Contents

Installing the Washing Machine
2 SAMSUNG Washing Machine Owner’s Instructions
Unpacking the Washing Machine
Unpack your washing machine and inspect it for shipping damage. Also make sure that
you have received all of the items shown below. If the washing machine was damaged
during shipping or you do not have all of the items, contact your Samsung dealer
immediately.
Overview of the washing machine
Cold Water
supply hose
Drain Hose
Door
Debris filter
Door release
Emergency drain
tube
Base cover
Adjustable feet
Control panel
Detergent
Drawer
Water Supply
Hose Drain Hose
Bolt Hole
Covers
Wrench Hose guide

SAMSUNG Washing Machine Owner’s Instructions 3
Selecting a location
Before you install the washing machine, select a location with the following characteristics:
•A hard, level surface (if the surface is uneven, see "Adjusting the leveling feet," below)
•Away from direct sunlight.
•Adequate ventilation
•Room temperature that will not fall below 0 ˚C
•Away from sources of heat such as coal or gas
Make sure that the washing machine does not stand on its power cord.
Ventilation openings must not be obstructed by carpeting when the washing machine is
installed on a carpeted floor.
Adjusting the leveling feet
If the floor is uneven, adjust the feet
(do not insert pieces of wood or any other
objects under the feet):
1. Loosen the leg bolt by turning it with
your hand until it is at the desired height.
2. Tighten the locking nut by turning it
with a (-) screwdriver.
If the washer is placed on an uneven or weak
surface, noise or vibration occurs.
(Only l degree angle is allowed.)
Removing the shipping bolts
Before using the washing machine, you
must remove the four shipping bolts from the
back of the unit. To remove the bolts:
1. Loosen all bolts with the supplied
wrench before removing them.
2. Take each bolt head and pull it through
the wide part of the hole.
Repeat for each bolt.
3. Fill the holes with the supplied plastic
covers.
4. Keep the shipping bolts for future use.
Installing the Washing Machine

4 SAMSUNG Washing Machine Owner’s Instructions
Connecting the water supply hose
The water supply hose must be connected to the washing machine at one end and to the water
faucet at the other. Do not stretch the water supply hose. If the hose is too short replace the
hose with a longer, high pressure hose.
To connect the water supply hose:
1. Take the L-shaped arm fitting for the cold water supply hose and connect to the cold water
supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the cold water supply hose to your sink's cold water faucet and
tighten it by hand. If necessary, you can reposition the water supply hose at the washing
machine end by loosening the fitting,rotating the hose, and retightening the fitting.
Option:
1. Take the red L-shaped arm fitting for the hot water supply hose and connect to the red
hot water supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the hot water supply hose to your sink's hot water faucet and
tighten it by hand.
Supply valve
Cold water
supply valve
L-Shaped arm
Installing the Washing Machine

Connecting the water supply hose
NOTICE After completing connection, if water leaks from the hose, then repeat the same steps. Use
the most conventional type of faucet for water supply. In case the faucet is square or too big,
remove the spacing ring before inserting the faucet into the adaptor.
Note: The appliance is to be connected to the water mains using new hose-sets and that old
hose-sets should not be used.
a
b
c
1. Remove the adaptor from the
water supply hose.
2. First, using a “+” type screw driver,
loosen the four screws on the adaptor.
Next, take the adaptor and turn part(b)
following the arrow until there is a 5mm
gap.
4. Connect the water supply hose to the
adaptor. Pull down part (c) of the
water supply hose. When you release
part (c) the hose automatically connects
to the adaptor making a ’click’ sound.
5.Connect the other end of the water
supply hose to the inlet water valve at
the top of the washer. Screw the hose
clockwise all the way in.
• If the water tap has a screw type faucet,
connect the water supply hose to the
tap as shown.
3. Connect adaptor to the water tap by
tightening the screws firmly.
Then, turn part (b) following the arrow
and put(a) and (b) together.
Installing the Washing Machine
SAMSUNG Washing Machine Owner’s Instructions 5

Installing the Washing Machine
6 SAMSUNG Washing Machine Owner’s Instructions
Drain hose connection procedures
1. Holding down the handle of
the drain hose connector, put
in the drain hose in desired
direction.
: Fix the hose into the drainage hole, and
give the hose connector a push to the
body to fix the hose.
Positioning the drain hose
The end of the drain hose may be positioned in three ways:
Over the edge of a wash basin.
The drain hose must be placed at a height of between 60
and 90 cm. To keep the drain hose spout bent, use the
supplied plastic hose guide. Secure the guide to the wall
with a hook or to the faucet with a piece of string to
prevent the drain hose from moving.
ln a sink drain pipe branch
The drain pipe branch must be above the sink siphon so
that the end of the hose is at least
60 cm above the ground.
ln a drain pipe
Samsung recommends that you use a 65 cm high vertical pipe; it must be no shorter than
60 cm and no longer than 90 cm.

Washing a Load of Laundry
SAMSUNG Washing Machine Owner’s Instructions 7
Washing for the first time
Before washing clothes for the first time, you must run a complete cycle without clothes. To do
this:
1. Press the Power button.
2. Pour a little detergent into compartment in the
detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the Start/Pause button.
•
This will remove any water from the manufacturer’s
test run remaining in the machine.
Dispender :Detergent for prewash or starch.
Dispenser : Detergent for main wash, water softener,pre-
soaking agent, bleach and stain removal product.
Dispenser : Additives,e.g.fabric softener or former (fill no higher than lower edge of insert “ A”)
Putting detergent in the washing machine
1. Pull out the detergent drawer.
2. Add laundry detergent into compartment .
3. Add softener into compartment (if you desire).
4. Add prewash detergent into compartment (if you desire).
Caution :
Concentrated or thick fabric softener and
conditioner must be diluted with a little water
before being poured into the dispenser (prevents
the overflow from becoming blocked.)

Washing a Load of Laundry
8 SAMSUNG Washing Machine Owner’s Instructions
Overview of the control panel
1. Digital graphic display
Displays the remaining wash cycle time,all of washing information and error messages.
2. Temperature selection button
Press the button repeatedly to cycle through the available water temperature options
(cold water( ), 30 ˚C, 40 ˚C , 60 ˚C , 75 ˚C and 95 ˚C).
3. Silver Wash button
Ag+ water is added during the time of washing and the last time of rinse, so that the
sterilizing washing and antibiotic coating are available.
4. Wash selection button
Press the button to select prewash. Prewash is available only with Cotton, Baby cotton,
Towel, Coloureds, Bedding.
5. Rinse selection button
Press the Rinse button to add rinse cycles. Maximum number of rinse cycles six.
6. Spin selection button
Press the button repeatedly to cycle through the available spin speed options.
(600, 800, 1000, 1200rpm)
7. Drying Time button
Every press of this button will select drying time repeatedly in the following order:
10min 30min 70min 100min
➔➔ ➔

Washing a Load of Laundry
SAMSUNG Washing Machine Owner’s Instructions 9
8. Drying Selector button
Every press of this button will select drying type repeatedly in the following order:
Standard Drying Sterilization Drying Delicate Drying Cancel.
❈ Drying Time button can’t be selected together with Drying Selector button.
9. Delay Start selection button
Press the button repeatedly to cycle through the available delayed start options (up to 24
hours mximum in one hour increments).
Displayed hours means the time of finished washing-cycle.
10. Fuzzy Control dial
Turn the dial to select one of the 9 available wash programs.
11. Start/Pause selection button
Press to pause and restart programs.
12. Power selection button
Press once to turn the washing machine on, press again to turn the washing machine off.
If the washing machine power is left on for longer than 10 minutes without any buttons
being touched, the power automatically turns off.
For the Silver Wash washing
The Ag+ water is added during the washing, and then a sanitary, sterilizing washing will be
performed. During the rinse, the Ag+ water is added at the last time of rinse. It treats clothes
with silver antibiotic coating and functions to protect the propagation of bacteria.
1. Open the door, put in the clothes and close the door again.
2. Press POWER button.
3. Select a course by turning the course selection dial.
4. Press Silver Wash button.
5. Put suitable amount of detergent and fiber softener in the detergent tray, and close it again.
:Put a suitable amount of detergent in the detergent tray for main washing, and put in
fiber softener to the lower level than the marked line.
For Prewash, put a supplementary detergent in the detergent tray.
❈ Silver Wash: If it is used together with fiber softener, its effect may be decreased.
6. Press Start/Pause button.
:It automatically performs an optimal washing with sensing the weight of clothes.
➔➔➔

Washing a Load of Laundry
10 SAMSUNG Washing Machine Owner’s Instructions
Childlock(button lock function)
Is a function for children not to handle the washing machine..
SETTING/RELEASE
If you want to set up or release that function, press both Temperature and Drying Time buttons
at the same time in 3sec.
How to Set up:
1. It can be set up during the power-on or operation of the washing machine.
2. If you set up the CHILDLOCK function during the laundry operation, no button except
for Power button can be controlled until you release that function.
3.The CHILDLOCK lamp will be lighted. [ ]
Notice:
1. In case the power is on again, the CHILDLOCK function remains unchanged.
2. In case of releasing that function, follow the way of release mentioned above.
NOTICE: When the other buttons, except for the Power button, are not controlled after
you turn on the Power , check "CHILDLOCK LAMP", please.
Washing clothes using Fuzzy Logic
Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Logic"
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
To wash clothes using the Fuzzy Logic programs:
1. Turn on your sink's water faucet.
2. Press the Power button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Add the detergent, softener, and prewash
detergent (if necessary) into the appropriate
compartment.
Note: Prewash is only available when washing
Cotton, Baby cotton, Towel, Coloureds,
Bedding.
It is only necessary if your clothing is
heavily soiled.
7. Turn the Fuzzy Control dial to select the
appropriate program for the type of clothes
Cotton, Baby cotton, Towel, Coloureds, Quick,
Wool, Delicates, Bedding, Clean Tub.
You will see the indicators light up on
the control panel.

8. At this time, you can control the wash temperature, rinsing times, spin speed, delay time
,silver wash, drying time or drying selector by pressing the appropriate option
button.(delay time, silver wash, drying time and drying selector button can be selected
optionally by user.)
9. Press the Start/Pause button on the Fuzzy Control dial and the wash cycle will begin.
The process indicator will light up and the remaining time for the cycle will appear in the
display.
Pause Option
Until water supply is completed after starting operation,
it is possible to put in the laundry or take out.
If push Start/Pause button, the door is unlocked immediately.
In case of too hot or too much water in washer, the door can not be opened.
After closed the door, one more push Start/Pause button to make washing process going on
continuously.
When the cycle is finished:
After the total cycle has finished,the power will turn off automatically.
1. Open the door.
Note : The door will not open untill the machine stops or the power turns off.
2.Remove laundry.
Washing clothes manually
You can wash clothes manually without using the Fuzzy Logic feature. To do so:
1. Turn the water supply on.
2. Press the Power button on the washing machine.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Put the detergent and, if necessary, softener or prewash detergent, in the appropriate
compartments.
7. Press the Temperature button to select the temperature
(cold water, 30˚C, 40˚C, 60˚C, 75˚C, 95˚C)
8. Press to rinse button to select the required number of rinse cycles.
Maximum number of rinse cycles is six.
The washing duration will be prolonged accordingly.
9. Press the Spin button to select the spin speed.
10. Press the Delay Start button repeatedly to cycle through the available delayed start
options (up to 24 hours mximum in one hour increments.). Displayed hours means the
time of ifinished washing-cycle.
11. Press the Start/Pause button and the machine will begin the cycle.
Washing a Load of Laundry
SAMSUNG Washing Machine Owner’s Instructions 11

Washing a Load of Laundry
12 SAMSUNG Washing Machine Owner’s Instructions
Using Dry course
Refer to the label of drying capacity and be sure to put in the clothes to the lower level than
the marked line for the dried clothe of 6.0kg.
1. Open the door, put in the clothes and close the door again.
2. Press the POWER button.
:The standard course will be selected automatically.
Drying is availably selected only at the courses such as Cotton, Baby cotton, Towel,
Coloureds and Quick.
3. Select Drying Time or Drying Selector button as follows.
:Drying Time: selectable in the following order of 10min 30min 70min 100min
CANCEL.
Drying Selector: repeatedly selectable in the following order of Standard Drying
Sterilization Drying Delicate Drying Cancel.
❈ It automatically displays Drying Time by sensing the weight of clothes before drying for
increasing the drying effect.
4. Put suitable amount of detergent and fiber softener in the detergent tray and close it
again.
5. Press Start/Pause button.
:It automatically performs an optimal function from washing to drying.
Remark:
•Drying Time and Drying Selector can’t be selected at the same time.
•The selected course can’t be altered after the start of drying.
•If you select Drying function, the intensity of SPIN will be set up as 1000rpm in default
for increasing the drying effect.
•If cold water is not supplied, drying will not be performed.
•If you do not take out clothes from the tub after the end of drying, a function of wrinkle
protection will be performed for about 3 minutes with the display of [End].
In order to take out the clothes: press firstly PAUSE or POWER button and take them
out.
•In case you wish to dry after hand washing, select both SPIN and Drying at the same
time.
➔➔➔
➔
➔➔ ➔

SAMSUNG Washing Machine Owner’s Instructions 13
Washing a Load of Laundry
Using Delay Start
You can set the washing machine to finish your wash automatically at a later time, choosing
up to 24 hours mximum (in one hour increments). Displayed hours means the time of
finished washing-cycle.
To do this:
1. Manually or automatically set your washing machine for the type of clothes you are
washing.
2. Press the Delay Start button repeatedly until the delay time is set.
3. Press the Start/Pause button. The Delay Start indicator will light, and the clock will
begin counting down until it reaches your finish time.
4. To cancel Delay Start, press the Power button, then turn the washing machine on
again.
Using Clean Tub
Is a course for washing the tub.
1. Press Power button.
2. Select the Clean Tub Course by turning the dial of Course Select.
3. Put an adequate amount of bleaching agent in the detergent tray (II) for Main
Laundry. (see page 7)
:You’ better use a powder-type detergent for more efficient washing.
If you want to wash it lightly : You may wash it just by selecting the 40˚C-Water
without bleaching agent.
4. Press Start/Pause button.
Remark: About one time a month is enough for the tub-washing.

Washing tips and hints
Sorting your laundry : Sort your laundry according to the following characteristics:
•Type of fabric care label symbol : Sort laundry into cottons, mixed fibers, synthetics,
silks, wools and rayon.
•Colour : Divide whites and colours. Wash new, coloured items separately.
•Size: Placing items of different sizes in the same load will improve the washing action.
•Sensitivity: Wash delicate items separately, using the Delicate wash program for pure
new wool, curtains and silk articles. Check the labels on the items you are washing or
refer to the fabric care chart in the appendix.
Emptying pockets : Coins, safety pins and similar items can damage linen, the
washing machine drum, and the water tank.
Securing fasteners : Close zippers and fasten buttons or hooks; loose belts or ribbons
should be tied together.
Prewashing cotton : Your new washing machine, combined with modern detergents,
will give perfect washing results, thus saving energy, time, water and detergent. However,
if your cotton is particularly dirty, use a prewash with a protein-based detergent.
Determining load capacity: Do not overload the washing machine or your laundry
may not wash properly. Use the chart below to determine the load capacity for the type of
laundry you are washing.
Fabric Type Load Capacity
Cotton /Coloured 10.0 kg
Baby cotton /Towel /Bedding 7.0 kg
Quick 5.0 kg
Wools /Delicates 4.0 kg
Dry 6.0 kg
Detergent tips: The type of detergent you should use is based on the type of fabric
(cotton, synthetic, delicate items, wool), colour, wash temperature, degree and type of
soiling. Always use "low suds" laundry soap, which is designed for automatic washing
machines.
Follow the detergent manufacturer's recommendations based upon the weight of the
laundry, the degree of soiling, and the hardness of the water in your area. If you do not
know how hard your water is, ask your water authority.
Note:
Keep detergents and additives in a safe, dry place out of the reach of children.
14 SAMSUNG Washing Machine Owner’s Instructions
Washing a Load of Laundry

SAMSUNG Washing Machine Owner’s Instructions 15
Maintaining the Washing Machine
Draining the washing machine in an emergency
1. Unplug the washing machine
from the power supply.
2. Open the filter-cover by using
a screwdriver.
3. Unscrew the emergency drain cap
by turning left. Grip the cap on the
end of the emergency drain tube
and slowly pull it out about 15 cm.
4. Allow all the water to flow into a bowl.
5. Reinsert the drain tube and screw the cap back on.
6. Replace the filter-cover.
Repairing a frozen washing machine
If the temperature drops below freezing and your washing machine is frozen:
1. Unplug the washing machine.
2. Pour warm water on the source faucet to loosen the water supply hose.
3. Remove the water supply hose and soak it in warm water.
4. Pour warm water into the washing machine drum and let it sit for 10 minutes.
5. Reconnect the water supply hose to the water faucet and check if the water supply
and drain operations are normal.
Cleaning the exterior
1. Wipe the washing machine surfaces, including the control panel, with a soft cloth
and non-abrasive household detergents.
2. Use a soft cloth to dry the surfaces.
3. Do not pour water on the washing machine.

Maintaining the Washing Machine
16 SAMSUNG Washing Machine Owner’s Instructions
Cleaning the detergent drawer and recess
1. Press the release lever on the inside
of the detergent drawer and pull it out.
2. Remove the cap from compartment .
3. Wash all of the parts under running water.
4. Clean the drawer recess with an old toothbrush.
5. Reinsert the cap (Pushing it firmly into place)
and replace the liquid detergent divider into the drawer.
6. Push the drawer back into place.
7. Run a rinse program without any laundry in the drum.
Cleaning the debris filter
Clean the debris filter 5 or 6 times a year, or when you see the following error message on
the display:
1. Open the filter-cover,
See “Draining the washing machine in an emergency" on page 15.
2. Unscrew emergency drain cap by turning left and drain off all the water.
See "Draining the washing machine in an emergency" on page 15.
3. Unscrew the filter cap and take it out.
4. Wash any dirt or other material from the filter. Make sure the drain pump propeller
behind the filter is not blocked. Replace the filter cap.
5. Replace the filter-cover.

SAMSUNG Washing Machine Owner’s Instructions 17
Cleaning the water hose mesh filter
You should clean the water hose mesh filter at least one time per year, or when you see the
following error message on the display:
To do this:
1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter from the end of the hose and rinse
it under water until clean. Also clean the inside and outside of the threaded
connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections are watertight.
Maintaining the Washing Machine

Troubleshooting
18 SAMSUNG Washing Machine Owner’s Instructions
Problems and solutions
The washing machine will not start
•Make sure the door is firmly closed.
•Make sure the washing machine is plugged in.
•Make sure the water source faucet is turned on.
•Make sure to press the Start/Pause button.
No water or insufficient water supply
•Make sure the water source faucet is turned on.
•Make sure the water source hose is not frozen.
•Make sure the water intake hose is not bent.
•Make sure the filter on the water intake hose is not clogged.
Detergent remains in the detergent drawer after the wash
program is complete
•Make sure the washing machine is running with sufficient water pressure.
•Put the detergents in the inner parts of the detergent drawer(away from the outside edges).
Washing machine vibrates or is too noisy
•Make sure the washing machine is set on a level surface. If the surface is not level,
adjust the washing machine feet to level the appliance (see page 3).
•Make sure that the shipping bolts are removed (see page 3).
•Make sure the washing machine is not touching any other object.
•Make sure the laundry load is balanced.
The washing machine does not drain and/or spin
•Make sure the drain hose is not squashed or bent.
•Make sure the water hose mesh filter is not clogged (see page 16).
The Door does not open
1. Disconnect the power plug from the power supply.
2. Remove the water from the washing machine.
3. Open the filter cover using a coin.(see page 15)
4. Locate the orange plastic tab and pull forward to open the door.
Understanding error messages
Error displayed Solution
Before contacting After-Sales service:
1. Try to remedy the problem (See "Troubleshooting" on this page).
2. Restart the programme to see if the fault is repeated.
3. If the malfunction persists, call after-sales service and describe the problem.
Close the door.
• Make sure the source water faucet is turned on.
• Check the water pressure.
• Clean the debris filter.
• Make sure the drainage hose is installed correctly.
• It appears when the internal temperature of the drum is high.
The fan will automatically function, so just wait until [Hot]
indication disappeared.
• Call after-sales service.
Laundry load is unbalanced; loosen any tangled laundry.
If only one item of clothing needs washing, such as a bathrobe
or jeans, the final spin result might be unsatisfactory and an
"UE" error message will be shown in the display window.
• This is when the internal temperature does not go down
below a certain degree in washing or hydrating.
Press the Start/Pause button to try again.