Sanyo CRD-BPDV3 User manual

Page 2
Document No. Document Name
SANYO Electric Co., Ltd.
Revision History
(1/1)
1. Revision History
Revision No. Manager Change Description Check Approval
First Edition Newly issued

Page 3
Document No. Document Name
SANYO Electric Co., Ltd.
Included Document List
(1/1)
2. Included Document List
Document Name Document No. Page No.
General Description 1/3 ~ 3/3 4
Dimensions, External View and
Names and Functions of Each Part 1/2 ~ 2/2 7
Terminal Description 1/3 ~ 3/3 9
Environmental Conditions 1/1 12
Reliability 1/3 ~ 3/3 13
Lot No. Reliability Description 1/1 16
Safety Standards 1/1 17
Electrical Characteristics 1/3 ~ 3/3 18
Function Description 1/3 ~ 3/3 21
Handling Manual 1/1 24
Notes for Handling 1/5 ~ 5/5 25

Page 4
Document No. Document Name
SANYO Electric Co., Ltd.
General Description
(1/3)
General Description
(1) Model Name: CRD-BPDV3
DVD-R/RW: drive with MAX ×12 speed reading, (×8) speed writing, ×4 speed rewriting.
DVD+R/RW: drive with MAX ×12 speed reading, ×8 speed writing, ×4 speed rewriting.
CD-R drive with MAX ×48 speed reading, ×48 speed writing, and ×24 rewriting)


The DVD-R/RW or DVD+R/RW feature will be selectable by the firmware.


(2) External View
External View
(3) General Specifications
1)Characteristics
* Half-height and built-in type
* Conforms to Orange Book Part 2, 3 & DVD±R/RW for general specifications.
* Equipped with the newly developed automatic strategy LSI with the data reliability
enhanced.
* DVD-R/RW drive with MAX ×12 speed reading(CAV), (×8) speed writing(PCAV),×4 speed
rewriting(CLV) DVD+R/RW drive with MAX ×12 speed reading(CAV),×8 speed
writing(PCAV), ×4speed rewriting(CLV). CD-R drive with MAX ×48 speed reading, ×48
speed writing(ZCLV), and ×24 rewriting(CLV)
* ATAPI is employed to enable high speed data transmission.
* Automatic loading mechanism
* Emergency disc ejecting function
* Data verifying function
* Media condition check function
* CD-DA read function
* Vertical operation feasible
* BURN-Proof Technology implemented
“BURN-Proof” stands for Proof against Buffer Under Run error, not for proof against burning.
* HD-BURN: a high-density writing technology
* Safe-BP: detects recording error due to irregular mechanical characteristics.
* FlexSS-BP: automatically selects the optimum recording speed for each disc.
* MRW function（CD and DVD）will support.

Page 5
Document No. Document Name
SANYO Electric Co., Ltd.
General Description
(2/3)
(4) Main Specifications
Items Specifications
Dimensions 148 (W) ×194.2 (D) ×42.3 (H) mm
Mass 1020 g
Recording Form Orange-book part 2, 3 Fixed packet
Disc-at-once Variable packet
Track-at-once
DVD-R for general 2.0
Disc at Once Recording
Incremental Recording
Front Panel Eject key, Emergency eject pinhole, LED (busy and write)
Headphone jack, Volume
Eject Automatic loading
Power Supply DC 5 ×(1 ± 5 %) V DC 12 ×(1 ± 10 %) V
(5) Operational environment for the “write/rewrite” application software
Items Specifications
Host Machine IBM compatible PC (Celeron433MHz or more) (Note 1)
OS MS-Windows 98SE/ME/2000/NT4.0/XP (Note 2)
Memory MS-Windows 98SE/ME/NT: 128 MB or more.
MS-Windows2000/WindowsXP: 128 MB required.
256 MB recommended.
Hard disc Empty Storage Capacity: 5GB or more (20GB or more recommended)
Average seek time: 20 ms or less
Transmission rate: 2 MB/s or more
Do not use the HDD which calibrate thermal during operation.
CD-R (×4 ~ ×48) : MITSUI CHEMICAL , HITACHI MAXELL,
RITEK, ACER, CMC (T.B.D)
CD-RW (×4 ,×10, ×12, ×16,×24 ) :MITSUBISHI CHEMICAL, RICOH
(T.B.D) (Note 3)
Recommended Media
DVD-R(×2, ×4, ×8):MITUBISHI CHEMICAL,HITACHI MAXELL,
PIONEER VIDEO,TAIYO YUDEN,TDK
DVD-RW(×2, ×4):PIONEER VIDEO,MITUBISHI CHEMICAL
,PRINCO
DVD+R(×2.4, ×4, ×8):RICOH,MITUBISHI CHEMICAL,RITEK
DVD+RW(×2.4, ×4):RICOH,MITUBISHI CHEMICAL,RITEK
(T.B.D)
(Note 1) If any problem occurs, negotiation is required to settle the matter.
(Note 2) Windows NT4.0 doesn’t have ATAPI-DMA-Driver in the standard.
Therefore, this Drive and IDE-HDD function with PIO-Mode.
(Note 3) We intend to add the proper media one by one in the near future.

Page 6
Document No. Document Name
SANYO Electric Co., Ltd.
General Description
(3/3)
(6)Scope
This specification is applied to the CD-R/RW/DVD-R/RW,DVD+R/RW drive “CRD-BPDV3”
which is designed by SANYO Electric Co., Ltd.
(7)Contents
1)Model No. CRD-BPDV3
2)Performance Write function onto CD-R/RW/DVD-R/RW/DVD+R/RW disc in
combination with the write application software and
CD-ROM/DVD-ROM read function, in combination with the
CD-ROM/DVD-ROM application software.
3)Applications Write onto and read of the CD-R/RW/DVD-R/RW/DVD+R/RW disc.
Read of CD-ROM/DVD-ROM disc.
4)Dimensions Refer to the item “Dimensions and Dimensional Drawing”.
5)Notes for handling Refer to the Manual and Notes for Handling.
6)Others
a.The specifications of this product are the same as in the delivery specifications.
If any fault or malfunction of the product occurs when it is used under any conditions
except for our guaranteed conditions, our company has no responsibility for the claim.
b.The specifications of this product are subject to change to enhance the performance.
c. The change of notice is issued when the specification is changed only.
d.If any doubt occurs regarding the contents of the specifications, negotiation is required to
settle the matter.

Page 7
Document No. Document Name
SANYO Electric Co., Ltd.
Dimensions, External View and Names and
Functions of Each Part
(1/2)
1. Dimensions and External View
(1) External View
Refer to the “General Description”.
(2) Dimensions and Dimensional Drawing
Refer to the attached document “Dimensions and Dimensional Drawing”.
(3) Names and Functions of Each Part on the Front Panel
Front Panel
1. Headphone
Terminal : The headphone with a stereo mini plug is connected through this terminal.
2. Headphone
Volume : The volume of the headphone connected to the headphone terminal is adjusted
using this volume dial. When the volume dial is turned right, the volume becomes
louder.
3. BUSY
indicator : Command executing.
ON Reading disc, accessing condition and TOC reading condition.
OFF Pause or Stop condition
4. WRITE
indicator : This is ON when the data is written onto the disc.
5. EJECT key : The disc is ejected, using this key. This key is available even when the tray is
moving. When the PRV command is transmitted from HOST or during writing,
this key is not available.
6. Emergency
eject pinhole : If the disc is not ejected when the key is pressed, because of power failure or run
away of the software, this pinhole is used to take out the disc.
7. Disc tray : The disc is placed on this tray.
6
7
5
1 24
3

Page 8
Document No. Document Name
SANYO Electric Co., Ltd.
Dimensions, External View and Names and
Functions of Each Part
(2/2)
(4) Names and Functions of Each Part on the Rear Panel
Rear Panel
1. ANALOG AUDIO
Connector :
The audio analog signal output connector.
2. CS/SL/MA Pins : By covering the jumper block, these pins are used to set the CD-R drive to
either a Master or Slave mode to work with the hard disk drive inside the
personal computer.
Default is Master.
3. IDE Connector : Using a 40-pin connector, the ATAPI terminal of the host computer is
connected to this connector.
4. DC Connector : This is the power supply terminal.
5. FACTORY USE ONLY
Pins : These pins are used only for the test in the factory. Don’t cover the jumper block on them.
6. DIGITAL AUDIO
Connector
: The audio digital signal output connector.
7. UDMA Pins : UDMA mode is enabled by covering the jumper block on the 2 pins of the
UDMA jumper terminals.
Default is ON.
(Note 1) In case of using some personal computes, UDMA mode need
to be disable.
1 234
6
5 7

Page 9
Document No. Document Name
SANYO Electric Co., Ltd.
Terminal Description
(1/3)
1. AUDIO Terminals
The audio signal is output through these terminals. These terminals are used when the sound
board applicable to these terminals, is attached to the personal computer.
2. Jumper Terminals (CS/SL/MA)
SL
SLSL
SL Jumper Terminals:
To set to Slave mode, cover the jumper block on the 2 pins of the SL jumper terminals.
If the IDE controller of the personal computer supports two devices, set the CD-R drive to Slave
mode. The hard disk drive inside the personal computer is set to Master mode.
MA
MAMA
MA Jumper Terminals:
To set to Master mode, cover the jumper block on the 2 pins of the MA jumper terminals.
If the IDE controller of the personal computer supports up to four devices, set the CD-R drive to
either a Primary Slave, a Secondary Master or a Secondary Slave mode. Primary or Secondary
is set up by the IDE controller, while Master or Slave mode is set up by covering the jumper
block on the rear of the CD-R drive. The hard disk drive inside the personal computer is set to
Primary Master mode.
CS
CSCS
CS Jumper Terminals:
If the personal computer is supporting CSEL (Cable Select) signal, cover the jumper block on
the 2 pins of the CS jumper terminals and remain Slave and Master open.
An exclusive interface cable is necessary.
R-ch GND L-chGND
Slave
Master Use CSEL
Jumper
block Jumper block