1. ASSEMBLE GLIDERS
InstallgliderwheelsetsA.
Installthewheelsetpinsasshown2. Withthepinsstickingthroughthe3.
glider,installawheelsetontothepin.
Usingapliers,securepintowheelset4.
withE-ringprovided,andrecessE-ring
intopocketofwheelset.
Checktomakesurethewheelsetsare5.
spacedapartthesamedimensionas
theceilingtrackspacing.
Repeatforeachglider.6.
Choosetheholesinthe55”glidertrackthatcorrespondtoyourceilingtrackspacing(16,24,32,40,or48inchesoncenter).1.
InstallONEendcap.B.
Ontheendofthe1. glidertrack,installan
endcapandsecurewithtwo#2screws
provided. SeeFigure4.
Removeendcapformgliderwith#2screwdriver.SeeFigure7.D.
Installgliderstoceilingtracks.E.
Installeachgliderassembly’sexposedwheelsetsintotheceilingtracksasshown1.
Afterallglidersareinstalled,installendcapsintheexposedendsoftheceiling2.
trackandsecurewithtwo#2screws.SeeFigure8.
InstallhooksC.
Installtwohookassembliesintoeach1.
gliderassemblyasshown.
Afterbothhooksareinstalledoneach2.
glider,installtheotherendcapand
securewithtwo#2screws.
Repeatsteps1-2foreachglider.3.
FIGURE1
FIGURE2 FIGURE3 FIGURE4
FIGURE5 FIGURE6
FIGURE8
WARNING AND DISCLAIMER:
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect
mounting, improper use, inadequate maintenance, or neglect of this system.
WARRANTY:
Saris Cycling Group, Inc. (“Saris”) warrants that your Saris product will be free from defects in materials and workmanship for as long as you own the product. This warranty only
extends to the original consumer buyer. This warranty does not apply to parts that have worn out through normal use or been damaged through misuse, abuse, neglect, accident
or unauthorized modi cations.ANY IMPLIED WARRANTIES WHICH THE BUYER MAY HAVE ARE LIMITED IN DURATION TO THE TIME THAT THE ORIGINAL CONSUMER BUYER OWNS
THE PRODUCT. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. At its option, Saris will repair or replace,
or refund the purchase price of, any Saris product which is defective or fails to conform with this warranty under normal use and service. To obtain service under this warranty, re-
turn the defective Saris Product or part, freight prepaid, to Saris at the address below. Please contact our customer service department prior to return to get a return authorization
number. Repair or replacement of a defective Saris product or refund of the purchase price, shall be the sole remedy of the buyer under this warranty, and in no event shall Saris
be liable for incidental or consequential damages, losses or expenses. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.This warranty gives you speci c legal rights, and you may also have other rights which vary from state to state.
4. LOAD CYCLEGLIDE SYSTEM
Saris Cycling Group, Inc. 5253 Verona Road, Madison WI 53711 800.783.7257 www.saris.com 19443 12/09 Patents Issued and Pending.
**YourCycleGlidesystemisdesignedforholdingfourbicycles(orsixbicycleswith6021add-on)withamaximumcombinedweightof
200lbs(90kg),300lbswithadd-on. Exceedingthisweightlimitcouldcausethesystemtofail. Donothangheavyitemsthatexceedatotal
of300lbsfromtheCycleGlideor50lbsperglider.
Pushallemptygliderstothefrontoftheceilingtracks.A.
Liftthebicycle(upsidedown)andplacethewheelsB.
ontothehooks. Whenloadingmultiplebicycles,itwill
behelpfultoalternatethedirectionthebicyclepoints
toavoidhandlebarinterference.
CAUTION:
Read and follow all instructions carefully.1.
It is the consumer’s responsibility to install this system in accordance with all codes, ordinances, and local regulations.2.
When installing the CycleGlide system, it is the consumer’s responsibility to ensure the structural integrity of the structure it is being mounted to.3.
Always be aware of electrical wires during installation. Failure to do so could result is an electrical shock or death.4.
The CycleGlide system is intended for storage of bicycles only.5.
When hanging a bicycle, always hang it from both wheels.6.
Hang only one bicycle per glider.7.
This bicycle storage system has a maximum load capacity of 50 lbs per glider. Overloading this system could result in damage to property or injury. Maximum system capac-8.
ity is no more than 300 lbs total system capacity when a two bike add-on is installed.
Use extreme caution when loading and unloading bicycles from this system, as loads above your head can easily become unstable.9.
It is the consumer’s responsibility to ensure that the CycleGlide system is in proper working condition before loading bicycles. Failure to do so could result in damage to10.
property or injury.
The wheels of the bicycles being hung on the CycleGlide must be tightly secured to the bicycle frame.11.
FIGURE9
FIGURE7
