SB SB-WR8805 User manual

ank you for purchasing from SafetyBasement.com! We appreciate
your business.
We made this simple manual to help you enjoy your new product as
quickly and easily as possible.
Be sure to check the TECH SUPPORT tab on your product page at
SafetyBasement.com for the latest available manual.
INSTRUCTION MANUAL
Revised: Jan 15, 2013
HQ MP3 Watch Voice Recorder
SB-WR8805

PRODUCT REFERENCE
RECORD
PREVIOUS TRACK
/VOLUME -
NEXT TRACK
/VOLUME +
MICROPHONE
RESET - You can reset the watch by Holding RECORD, and pressing
P L AY.
PLAY
USB /
HEADPHONE
GREEN STATUS
LIGHT
RED STATUS
LIGHT

BEFORE YOUR FIRST USE
Please charge fully before use. You may charge via your PC or the adapater that may have been
included with your device. Do not use other adapters, as they may damange your device.
1. Be sure that the status light is OFF.
2. Plug USB cable into device rst.
3. Plus other end of USB directly into your PC. Note: USB hubs may cause your device to not
work properly, so always use a direct USB port when charging or accessing your device.
NEEDED FILES
No les are needed to use this device.
HEADPHONE ADAPTER
Earbuds have been included with your watch. You may also use other headphones by using the
included headphone jack adapter.
PREVIOUS TRACK
/VOLUME -
NEXT TRACK
/VOLUME +

POWER ON
1. Hold the PLAY button until the Green status light appears. You are now in Stand By Mode.
PLAY YOUR MP3 FILES
1. In Stand By Mode, you are ready to play your MP3 les. Press PLAY to start playing your
MP3s. e green status light will ash while playing your les.
2. To skip tracks, use the FF and REW buttons to move up and down your list of tracks.
3. To pause playback, quickly press PLAY. e green status light will slowly blink. Press PLAY
again to unpause.
4. To return to Stand By Mode, hold PLAY for 2 seconds, until the green status light is steady.
RECORDING
1. From Stand By mode, hold the RECORD button until the Red status light appears. It will be
steady. You are now in Record mode.
2. Press RECORD again. Both status lights will appear. en, the green status light will go dark
and the Red status light will start blinking. You are now recording.
3. To Pause your Recording, press the PLAY button quickly. e Red status light will blink
slowly while you are paused. To unpause, press PLAY again.
4. To Stop recording, press RECORD quickly. e Red status light will be steady.
PLAY YOUR VOICE RECORDINGS
1. From Stand By Mode, press the RECORD button until the Red status light appears.
2. Press PLAY, and your most recent recording will start playing.
3. To skip between recordings, press FF and REW.
POWER OFF
1. Hold the PLAY button until both status lights go dark.
VOLUME CONTROL
1. During playback of your MP3 les or voice recordings, you can adjust the volume up and
down by holding the VOLUME + and VOLUME - buttons.

WHERE DO YOUR MP3 FILES GO?
MP3 les must be placed in the correct location for your watch to play them properly. When
you connect your watch to your PC, it will appear as an external drive. Copy your MP3 les into
the main folder of your watch. Do not put them into the folder called RECORD.
Your MP3 les can be standard MP3 encoding, from 8 - 320Kbps.
YOUR VOICE FILES
Your Voice Recordings are saved in the folder called RECORD.